Você está na página 1de 5

REPORT ON

Imported Cutter Section Dredger with Accessories and Grab Dredger

Imported by:
Mir Akhter Hossain Ltd.,
House No. 13, Road 12, Dhanmondi R/A,
Dhaka 1209, Bangladesh

Consultants

Bureau of Research, Testing and Consultation (BRTC)


Bangladesh University of Engineering and Technology (BUET), Dhaka, Bangladesh
1. Background and Scope of Services

Table 1: BUET Team for the inspection of the dredgers

Sl. No. Name of the Faculty Members Position

2. Particulars of Imported Items

Particulars of imported cutter suction dredger and grab dredger are presented in Table 2 and Table 3
respectively.
Table 2: Particulars of IHC Beaver 50 (20") Cutter Suction Dredger

Sl. No. Name of Item Quantity


1 IHC Beaver 50 (20") Cutter Suction Dredger
2 Spud carrier installation for Beaver 50
Increased dredging depth for Beaver 50 (16m
instead of standard 14 m), involving extension of
3
cutter ladder, side pontoons and spuds.
4 Set of standard accessories for Beaver 50

Table 3: Particulars of IHC Beaver Grab dredger GD 500

Sl. No. Name of Item Quantity


1 IHC Beaver Grab dredger GD 500
2 Set of standard accessories Grab dredger GD 500
The details of the various components for imported cutter suction dredger and grab dredger are
mentioned in the packing list (attached with this report) that includes anchors, spuds, follow
pontoon, rubber hoses for floating pipeline, cutter teeth, spud hoisting wire, hose assembly, circuit
breaker, mechanical seal, power LED, solenoid, diffuser plate, pressure relief valve, fuel filter
element, wearing plate suction side, propeller shaft etc. During the visit a number of photographs
were taken highlighting the inspection activities of the BUET Team and some of these photographs
have been attached at the end of this report.

Table 4: Main Characteristics of IHC Beaver 50 (20") Cutter Suction Dredger

Sl. No. Name of the Item Item specification


1 Length over all, ladder raised (approx.)
2 Cutter power (approx.)
3 Dredge pump type
4 Suction pipe diameter
5 Discharge pipe diameter
6 Cutter type

Table 5: Main Characteristics of IHC Beaver Grab dredger GD 500

Sl. No. Name of the Item Item specification


1 Capacity of Grab
2 Length over all (approx.)
3 Breadth over all (approx.)
Average draught, with full bunkers
4
(approx)
5 Total installed power
6 Free sailing speed (approx.)

3. Conclusions

Upon visiting the site and inspecting the cutter suction dredger and grab dredger, the
following conclusions can be drawn :

4. Annexure
The following documents obtained from Mir Akhter Hossain Ltd., have been attached at the
end of the report.
1. Letters from Mir Akhter Hossain Ltd (1 pg.)
2. Commercial Invoice (2 pg.)
3. Bill of Ladding (2 pg.)
4. Packing List (3 pg.)
5. Certificate of Origin (1 pg.)
6. L/C Documents (4 pg.)
7. Proforma Invoice (4 pg.)
8. Documents from Customs House, Chittagong. (2 pg.)

Você também pode gostar