Escolar Documentos
Profissional Documentos
Cultura Documentos
D1= 7743
H= 2440
D2= 4917
2a
11015.6 mm
7020.976 mm
7775.363 mm
4955.759 mm
90.20414 Degrees
Angle Subtended by the Entire development at center= 180.4083 Degrees
Enter the fraction of entire development required = 0.5
Angle Subtended by the Section = 90.20414 Degrees
Enter the thickness of the plate = 50 mm
Radius R1 = 4955.759 mm
Smaller Chord Length = 7020.976 mm
Radius R2 = 7775.363 mm
Larger Chord Length = 11015.6 mm
Prepared by van
dimesions as per drawing
CL4 =
CL2= 7004.976 mm
R2= 7775.363 mm
R1= 4955.759 mm
Q
Cone segment with Cone segment with
shorter chord length larger chord length
Smaller Longer Smaller Longer
(mm) (mm) (mm) (mm)
Angle subtended by this shorter segment of cone(Q ) = 89.94237 90.11026 90.28007 90.25013
Top Circumference = 24325.35 24325.35
Bottom Circumference = 15604.29 15604.29
No.of segments for which circumference regd.(in ratio)=. 0.5 0.5 0.5 0.5
So Required circumfernce of relevant segments = 7802.145 12162.68 7802.145 12162.68
Actual circumference coming = 7779.503 12150.02 7808.713 12168.88
7025.61 mm