Escolar Documentos
Profissional Documentos
Cultura Documentos
1
A passion for performance
At Volvo Construction Equipment, we’re not just
coming along for the ride. Developing products
and services that raise productivity – we are
confident we can lower costs and increase profits
for industry experts. Part of the Volvo Group, we
are passionate about innovative solutions to help
you work smarter – not harder.
Enter the cab to see and feel what makes the Volvo Care Cab a Volvo Care Cab
The Volvo Care Cab provides the
legend in comfort. Visibility is excellent to the rear and to the bucket
industry standard for operator
edge. Operator controls are in ergonomically positions. Breathe and comfort and safety. It’s spacious, with plenty of
foot, leg and personal space. The Volvo Care
work at ease in clean, quiet comfort. It’s loaded with features to keep Cab applies to ROPS/FOPS standards.
your extended focus on profit-enhancing productivity.
4
Air Filter Excellent visibility
Breathe easier with the best cab air climate See it all and do it all in your Volvo wheel
in the industry. The well placed cab air intake loader. Wide windows and narrow cab columns
is placed high up to stay away from dusty air put you in command with clear, all-around
from the tires. The easy-to-replace pre-filter visibility. Very good view to the attachment/
separates out course particles. Then 90% of corners. Improves comfort and jobsite safety,
the cab air is circulated through the main filter, for greater productivity.
resulting in very clean air.
5
Carry the load every day.
Volvo gives you all the power you need. But the true Volvo edge comes from the combination of power
with efficiency, durability throughout and, above all, profitability. That’s how Volvo wheel loaders help you
do more every day.
Engine performance
The new 13 liter 6 cylinder high performance, low fuel consumption
turbocharged diesel engine equipped with the cooled exhaust
recirculation particle filter makes the Volvo engine very reliable thanks to
high torque at low engine speeds.
6
Load-sensing hydraulics
Uses variable-flow, axial piston pumps for superior
control of the load and attachments. High breakout
force. Faster lift and tilt functions for shorter cycle times. High
capacity pumps deliver reliability, high performance/productivity
and low fuel consumption.
7
Designed for performance.
They only judge you on what you get done. That’s why Volvo L150G, L180G and L220G loaders are built
to help you do more. It’s where heavy-duty design meets nimble efficiency, better response and faster
cycles. Meet and exceed demand in demanding conditions – day after day, year after year.
Reverse By Brake/OptiShift
The unique Volvo-patented Reverse By Brake (RBB) applies the standard
service brake instead of the torque converter. Less loading stress on the
torque converter and transmission. More fuel efficiency and deceleration
comfort. Ideal for short cycle or truck loading.
OptiShift includes the torque converter with Lock-Up and Reverse
By Brake. Improves loading cycles, incline climbing performance, fuel
efficiency and comfort, including during deceleration.
8
Volvo purpose-built drivetrain
Volvo delivers a perfectly optimized, purpose-built
drivetrain – built by Volvo to work together. Includes
Volvo engine, transmission and axles, well matched to the hydraulic
and steering system. This harmony delivers lower fuel consumption
and better engine response, even at lower RPM.
9
Spend more time working.
10
The faster you can get working each day, the more you’ll do and the Engine hood design
Newly-designed engine hood
more you’ll earn. That’s why Volvo wheel loaders are built with quick
can be electronically opened
and easy service access, advanced monitoring and more safety. With backwards. Easy opening and closing
with a wide open position angle. Excellent
more maintenance-free parts and components you get more worry- access for fast and easy service/cleaning.
free reliability. Provides improved ventilation of the engine
compartment.
11
Smart load sense.
Care Cab
ROPS/FOPS tested roomy cab
with idealy placed controls qnd
Contronics excellent operator visibility.
Computerized, real-time machine
diagnostics and monitoring system.
Load-sensing hydraulics
Variable-flow, axial piston
pumps for superior control
and high breakout force.
Eco-friendly
Low fuel consumption
and Tier 4 Interim/
Stage IIIB-compliant emissions.
Volvo Power
13 liter 6 cylinder water cooled turbo engine
for low fuel consumption. Dependable power
with high torque at low RPM, cooled exhaust
recirculation and active regeneration.
12
Servo controls
Mounted on the operator seat
for comfortable operation and
control.
CareTrack
Standard telematics to remotly guide machine
owners for optimized productivity and for dealer
to guide owner of next service and more.
Eco pedal
Mechanical counter pressure encourages
fuel-saving ease with the accelerator pedal.
TP linkage
Excellent link geometry for high
breakout torque along with very
good parallel movement.
Heavy-duty axles
OptiShift Absorb the weight for optimal torque,
Includes the torque converter with reduced stresses and longer life.
Lock-Up and Reverse By Brake. For
lower fuel consumption in most applications
13
Hard at work, not on the planet.
14
Looking out for the environment is everyone’s concern. It is a core value of Volvo and built into every one
of our machines. This commitment helps you work hard, but not at the expense of our planet. Lower
emissions, noise and fuel usage. That’s Volvo.
V-ACT
Volvo V-ACT engine
The Volvo V-ACT engine is environmentally responsible with low
emission levels that meet Tier 4 Interim/Stage IIIB requirements.
More peace of mind when working in sensitive environments.
Provides the ability to derive high torque performance while working
more efficiently at low engine speeds.
15
Connect and go.
All genuine Volvo attachments are purpose-built with the same quality
as the rest of the machine. They’re designed as an integrated part of
the wheel loader for which they were intended, their functions and
properties perfectly matched to parameters such as link-arm geometry
and breakout, rim pull and lifting force. That’s why the machine and
attachment work in perfect harmony, forming a dependable cohesive
unit to get the job done – safely and efficiently.
Volvo designed and built your machines, so no-one knows how to keep
MATRIS them working in top condition more than us. When it comes to your
machine, our Volvo trained technicians are the experts.
MATRIS, Volvo’s exclusive machine tracking information system, delivers
detailed operating history analysis about the utilization and efficiency Our technicians work with industry leading diagnostic tools and
factors that influence operating costs. MATRIS turns the data captured techniques, using only Genuine Volvo Parts to deliver the highest levels
inside the machine’s computer into easy-to-use graphs and reports. of quality and service. Talk to your Volvo dealer about how genuine Volvo
Maximizes machine and operator performance. Reduces maintenance services can best provide the service and maintenance plan that is the
costs and increasing service life. right fit for you and your business.
18
CareTrack
CareTrack is Volvo’s optional telematics system that
works with the machine’s internal diagnostic system.
Installation is simple. You can remotely track usage, productivity,
fuel consumption and more. Maximize uptime through important
service reminders. CareTrack also monitors geographic machine
location and can even prevent unauthorized use.
19
Volvo L150G, l180G, L220g IN DETAIL.
Engine
13 liter, 6-cylinder straight turbocharged diesel engine with 4
valves per cylinder, overhead camshaft and electronically controlled
unit injectors. The engine has wet replaceable cylinder liners and
replaceable valve guides and valve seats. The throttle applications
is transmitted electrically from the throttle pedal or the optional
hand throttle. Air cleaning: Three-stage Cyclone precleaner -
primary filter - secondary filter. Cooling system: Hydrostatic,
electronically controlled fan and intercooler of the air-to-air type.
L150G L150G
Engine D13H-E (Tier 4i)
D13H-F (Stage IIIB)
Max power at r/s (r/min) 21,7 (1300)
SAE J1995 gross kW / hp 220 / 300
ISO 9249, SAE J1349 net kW / hp 220 / 300
Max torque at r/s (r/min) 17,5 (1050)
SAE J1995 gross Nm 1871
ISO 9249, SAE J1349 Nm 1869
Economic working range r/min 800–1600
Displacement l 12,8
L180G L180G
Engine D13H-E (Tier 4i)
D13H-F (Stage IIIB)
21,7-23,3
Max power at r/s (r/min)
(1300–1400)
SAE J1995 gross kW / hp 246 / 334
ISO 9249, SAE J1349 net kW / hp 245 / 333
Max torque at r/s (r/min) 16,7 (1000)
SAE J1995 gross Nm 2030
ISO 9249, SAE J1349 net Nm 2024
Economic working range r/min 800–1600
Displacement l 12,8
L220G L220G
Engine D13H-E (Tier 4i)
D13H-F (Stage IIIB)
21,7-23,3
Max power at r/s (r/min)
(1300-1400)
SAE J1995 gross kW / hp 274 / 373
ISO 9249, SAE J1349 net kW / hp 273 / 371
Max torque at r/s (r/min) 18,3 (1100)
SAE J1995 gross Nm 2231
ISO 9249, SAE J1349 net Nm 2220
Economic working range r/min 800–1600
Displacement l 12,81
20
Drivetrain Electrical system
Torque converter: Single-stage. Central warning system: Contronic electrical system with central
Transmission: Volvo countershaft transmission with single lever warning light and buzzer for following functions: - Serious engine
control. Fast and smooth shifting of gears with Pulse Width fault - Low steering system pressure - Over speed warning
Modulation (PWM) valve. Torque converter with lockup. engine - Interruption in communication (computer fault) Central
Transmission: Volvo Automatic Power Shift (APS) with fully warning light and buzzer with the gear engaged for the following
automatic shifting 1-4 and mode selector with 4 different gear functions. - Low engine oil pressure - High engine oil temperature
shifting programs, including AUTO. - High charge air temperature - Low coolant level - High coolant
Axles: Volvo fully floating axle shafts with planetary hub reductions temperature - High crank case pressure - Low transmission
and nodular iron axle housing. Fixed front axle and oscillating rear oil pressure - High transmission oil temperature - Low brake
axle. 100% differential lock on the front axle. Optional: Limslip rear pressure - Engaged parking brake - Fault on brake charging - Low
hydraulic oil level - High hydraulic oil temperature - Overspeeding
L150G in engaged gear - High brake cooling oil temperature front and
Transmission Volvo HTL 221 rear axles.
Torque multiplication 1,856:1
L150G, L180G, L220G
Maximum speed, 1st gear km/h 6,5
Voltage V 24
forward/reverse 2nd gear km/h 12,5
Batteries V 2 x 12
3rd gear km/h 26,0
Battery capacity Ah 2 x 170
4th gear* km/h 38,0
Cold cranking capacity, approx A 1000
Measured with tires 26.5 R25 L3
Batteries connected to postiv terminal
Volvo/AWB
Front axle/rear axle Alternator rating W/A 2280/80
40B/40C/40B (limslip)
Rear axle oscillation ± ° 15 Starter motor output kW 7,0
Ground clearance at 15° osc. mm 610
Brake system
L180G Service brake: Volvo dual-circuit system with nitrogen charged
Transmission Volvo HTL 221 accumulators. Outboard mounted hydraulically operated, fully
Torque multiplication 1,856:1 sealed oil circulation-cooled wet disc brakes. The operator can
Maximum speed, 1st gear km/h 6,5 select automatic disengagement of the transmission when braking
forward/reverse using Contronic.
2nd gear km/h 12,5
Parking brake: Fully sealed, wet multi-disc brake built into the
3rd gear km/h 26,0
transmission. Applied by spring force and electro-hydraulically
4th gear* km/h 38,0
release dwith a switch on the instrument panel.
Measured with tires 26.5 R25 L3 Secondary brake: Dual brake circuits with rechargeable
Front axle/rear axle Volvo/AWB 40B/40B accumulators. One circuit or the parking brake fulfills all safety
Rear axle oscillation ± ° 15 requirements..
Ground clearance at 15° osc. mm 610 Standard: The brake system complies with the requirements of
ISO 3450.
L220G
L150G
Transmission Volvo HTL 306
Torque multiplication 2,094:1 Number of brake discs per wheel front/rear front 1
Maximum speed, 1st gear km/h 7,0 Accumulators l 2x1,0 3x0,5
forward/reverse 2nd gear km/h 12,5 L180G
3rd gear km/h 25
Number of brake discs per wheel front/rear front 1
4th gear* km/h 38,0
Accumulators l 2x1,0 1x0,5
Measured with tires 29.5 R25 L4
Front axle/rear axle Volvo/AWB 50/41 L220G
Rear axle oscillation ± ° 15 Number of brake discs per wheel front/rear front 2
Ground clearance at 15° osc. mm 600 Accumulators l 2x1,0 1x0,5
*) limited by ECU
21
Volvo L150G, l180G, L220g IN DETAIL
L180G
Lift cylinders 2
L150G Cylinder bore mm 180
Emergency exit: Use emergency hammer to break window Piston rod diameter mm 90
Sound level in cab according to ISO 6396/SAE J2105 Stroke mm 788
LpA dB(A) 69 Tilt cylinder 1
External sound level according to ISO 6395/SAE J2104 Cylinder bore mm 240
LwA dB(A) 108 Piston rod diameter mm 120
Ventilation m3/min 9 Stroke mm 480
Heating capacity kW 16
Air conditioning (optional) kW 7,5 L220G
Lift cylinders 2
L180G Cylinder bore mm 190
Emergency exit: Use emergency hammer to break window Piston rod diameter mm 90
Sound level in cab according to ISO 6396/SAE J2105 Stroke mm 768
LpA dB(A) 70 Tilt cylinder 1
External sound level according to ISO 6395/SAE J2104 Cylinder bore mm 250
LwA dB(A) 108 Piston rod diameter mm 120
Ventilation m3/min 9 Stroke mm 455
Heating capacity kW 16
Air conditioning (optional) kW 7,5
L220G
Emergency exit: Use emergency hammer to break window
Sound level in cab according to ISO 6396/SAE J2105
LpA dB(A) 70
External sound level according to ISO 6395/SAE J2104
LwA dB(A) 109
Ventilation m3/min 9
Heating capacity kW 16
Air conditioning (optional) kW 7,5
22
Hydraulic system Steering system
System supply: Two load-sensing axial piston pumps with variable Steering system: Load-sensing hydrostatic articulated steering.
displacement. The steering function always has priority. System supply: The steering system has priority feed from a load-
Valves: Double-acting 2-spool valve. The main valve is controlled sensing axial piston pump with variable displacement.
by pilot pressure and electric servo (L150G) i.e. by a 2-spool pilot Steering cylinders: Two double-acting cylinders.
valve (L180G/L220G).
Lift function: The valve has three positions: raise, hold and lower L150G L180G L220G
position. Inductive/magnetic automatic boom kickout can be Steering cylinders 2 2 2
switched on and off and is adjustable to any position between Cylinder bore mm 100 100 100
maximum reach and full lifting height. Rod diameter mm 60 60 60
Tilt function: The valve has three functions including rollback, hold Stroke mm 390 525 525
and dump. Inductive/magnetic automatic tilt can be adjusted to the
Working pressure MPa 21 21 21
desired bucket angle.
Maximum flow l/min 188 188 191
Cylinders: Double-acting cylinders for all functions.
Filter: Full flow filtration through 10 micron (absolute) filter Maximum articulation ±° 37 37 37
cartridge.
Service
L150G L180G L220G
Service accessibility: Large, easy-to-open hood covering
Working pressure whole engine department, electrically operated. Fluid filters
MPa 29,0 29,0 29,0
maximum, pump 1 and component breather air filters promote long service
Flow l/min 180 217 253 intervals. Possibility to monitor, log and analyze data to facilitate
at MPa 10 10 10 troubleshooting.
engine speed r/s(r/min) 32(1900) 32(1900) 32(1900)
Working pressure L150G L180G L220G
MPa 31,0 31,0 31,0 Fuel Tank l 335 335 335
maximum, pump 2
Flow l/min 202 202 202 Engine coolant l 46 46 46
at MPa 10 10 10 Hydraulic oil tank l 156 156 226
engine speed r/s(r/min) 32(1900) 32(1900) 32(1900) Transmission oil l 48 48 48
Working pressure Engine oil l 50 50 50
MPa 25,0 25,0 25,0 Axle oil front/rear l 45/55 45/55 77/71
maximum, pump 3
Flow l/min 77 77 77
at MPa 10 10 10
engine speed r/s(r/min) 32(1900) 32(1900) 32(1900)
Pilot system,
MPa 3,5 3,5 3,5
working pressure
Cycle times
Tilt* s 2,0 1,8 1,6
Lower, empty s 3,7 3,3 3,2
Total cycle time s 11,6 11,5 10,6
23
SPECIFICATIONS
Tires L150G, L180G: 26.5 R25 L3. Tires L220G: 29.5 R25 L4
a3
L150G Sales code: WLA80713
Operating weight (incl. logging cw 1 140 kg): 25 660 kg a2
Operating load: 7 700 kg
24
L150G
LONG
BOOM
Volume, heaped ISO/SAE m3 4,0 4,4 4,8 5,2 4,0 4,4 4,5 3,5 6,8 -
Volume at 110% fill factor m3 4,4 4,8 5,3 5,7 4,4 4,8 5,0 3,9 7,5 -
Static tipping load, straight kg 19850 19590 19310 19160 17610 17230 17620 18300 16550 -3490
at 35° turn kg 17700 17440 17170 17020 15710 15330 15710 16320 14710 -3210
at full turn kg 17460 17200 16920 16780 15500 15110 15490 16090 14500 -3180
Breakout force kN 201,1 191,5 183,2 182,6 202,0 192,7 190,5 187,9 146,6 9
A mm 8590 8670 8740 8750 8800 8880 8890 8850 9140 510
E mm 1230 1300 1360 1370 1410 1480 1500 1450 1710 10
H**) mm 3030 2970 2920 2920 2880 2830 2820 2870 2620 570
L mm 5730 5780 5880 5870 5870 5980 5890 5980 6090 560
M**) mm 1220 1270 1320 1320 1350 1400 1410 1420 1560 -20
N**) mm 1800 1830 1860 1860 1870 1890 1900 1930 1940 450
V mm 3200 3200 3200 3400 3230 3230 3000 3230 3200 -
a1 clearance circle mm 14640 14670 14700 14890 14750 14790 14580 14800 14900 -
Operating weight kg 24490 24700 24890 25020 23680 24020 23780 24930 23990 410
*) With L5 tires Note: This only applies to genuine Volvo attachments.
**) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge.
Measured at 45° dump angle. (Spade nose buckets at 42°.)
The chosen bucket is determined by the density of the material and the expected
bucket fill factor. The actual bucket volume is often larger than the rated capacity, 4,4 m3 4,6 4,4
Rehandling*
due to the features of the TP linkage, including an open bucket design, good 3
4,8 m 5,0 4,8
rollback angles in all positions and good bucket filling performance. The example
represents a standard boom configuration. 5,2 m3 5,5 5,2
Example: Sand and gravel. Fill factor ~ 105%. Density 1,6 t/m3.
purpose
General
Result: The 4,0 m3 bucket carries 4,2 m3. For optimum stability always consult 4,0 m3 4,4 4,0
6,8 m3 6,8
~ 1,7 3,5 ~ 3,5
Rock ≤100
The size of rock buckets is optimized for optimal penetration and filling capability
rather than the density of the material.
* Including counterweight
Tires 26.5 R25 L3 26.5 R25 L5 775/65 R29 L3 26.5 R25 L5 775/65 R29 L3
25
SPECIFICATIONS
L180G
LONG
BOOM
Volume, heaped ISO/SAE m3 4,8 5,2 5,5 5,8 4,4 4,6 4,8 4,2 7,8 -
Volume at 110% fill factor m3 5,3 5,7 6,1 6,4 4,8 5,1 5,3 4,6 8,6 -
Static tipping load, straight kg 22930 22780 22610 22480 21080 21100 20900 21650 19710 -3760
at 35° turn kg 20310 20160 20000 19870 18700 18710 18520 19190 17390 -3430
at full turn kg 20010 19870 19700 19580 18420 18440 18250 18910 17130 -3390
Breakout force kN 224,8 224,2 216,2 209,9 236,3 236,3 226,7 212,6 173,4 4
A mm 8890 8890 8960 9010 9010 9010 9080 9140 9360 470
E mm 1420 1430 1490 1540 1540 1540 1600 1650 1860 20
H**) mm 3060 3060 3010 2980 2970 2970 2930 2910 2700 500
L mm 6020 6010 6040 6110 6120 6170 6170 6320 6300 490
M**) mm 1330 1340 1380 1410 1410 1410 1460 1520 1610 20
N**) mm 1960 1970 1990 2010 2000 2000 2030 2080 2060 420
V mm 3200 3400 3400 3400 3230 3230 3230 3230 3400 -
a1 clearance circle mm 14800 14990 15010 15040 14880 14880 14910 14960 15220 -
Operating weight kg 27340 27460 27560 27630 26460 26500 26560 27720 26740 310
*) With L5 tires Note: This only applies to genuine Volvo attachments.
**) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge.
Measured at 45° dump angle. (Spade nose buckets at 42°.)
The chosen bucket is determined by the density of the material and the expected
bucket fill factor. The actual bucket volume is often larger than the rated capacity, 5,2 m3 5,5 5,2
Rehandling*
due to the features of the TP linkage, including an open bucket design, good 5,5 m3 5,8 5,5
rollback angles in all positions and good bucket filling performance. The example
represents a standard boom configuration. 5,8 m3 6,1 5,8
Example: Sand and gravel. Fill factor ~ 105%. Density 1,6 t/m3.
4,4 m3 4,8 4,4
Result: The 4,6 m3 bucket carries 4,8 m3. For optimum stability always consult
purpose
General
7,8 m3 7,8
~ 1,7 4,4 ~ 4,8
~ 110
Earth/Clay ~ 1,6 4,6 ~ 5,1 4,8 m3 5,0 4,8
~ 1,5 4,8 ~ 5,3
5,2 m3 5,5 5,2
~ 1,7 4,4 ~ 4,6
Sand/Gravel ~ 105
~ 1,6 4,6 ~ 4,8
General
7,8 m3 7,8
~ 1,7 4,3 ~ 4,3
Rock ≤100
The size of rock buckets is optimized for optimal penetration and filling capability
rather than the density of the material.
* Including counterweight
Tires 26.5 R25 L3 26.5 R25 L5 775/65 R29 L3 26.5 R25 L5 775/65 R29 L3
26
L220G
LONG
BOOM
Volume, heaped ISO/SAE m3 5,6 5,9 6,3 4,9 5,2 5,6 4,5 5,0 8,2 -
Volume at 110% fill factor m3 6,2 6,5 6,9 5,4 5,7 6,2 5,0 5,5 9,0 -
Static tipping load, straight kg 24850 24720 24540 23660 23520 23250 24000 23170 22520 -2870
at 35° turn kg 22080 21950 21780 21040 20900 20650 21340 20580 19950 -2640
at full turn kg 21760 21640 21470 20740 20600 20350 21040 20280 19660 -2610
Breakout force kN 228,2 222,5 214,4 255,2 248,1 231,9 212,0 196,6 190,3 4
A mm 9240 9290 9360 9290 9340 9440 9580 9730 9560 310
E mm 1440 1480 1550 1480 1520 1620 1730 1860 1730 -20
H**) mm 3190 3160 3110 3160 3120 3060 3030 2930 2940 360
L mm 6290 6310 6400 6390 6450 6460 6420 6500 6480 370
M**) mm 1380 1410 1460 1410 1440 1520 1690 1800 1580 -30
N**) mm 2090 2110 2140 2100 2120 2180 2250 2300 2170 270
V mm 3400 3400 3400 3430 3430 3430 3430 3430 3700 -
a1 clearance circle mm 15560 15580 15620 15610 15630 15690 15770 15850 16010 -
Operating weight kg 32280 32360 32470 31550 31640 31680 32990 33160 32040 390
*) With L5 tires Note: This only applies to genuine Volvo attachments.
**) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge.
Measured at 45° dump angle. (Spade nose buckets at 42°.)
The chosen bucket is determined by the density of the material and the expected
5,6 m3 5,9 5,6
bucket fill factor. The actual bucket volume is often larger than the rated capacity,
Rehandling*
due to the features of the TP linkage, including an open bucket design, good 5,9 m3 6,2 5,9
rollback angles in all positions and good bucket filling performance. The example
6,3 m3 6,6 6,3
represents a standard boom configuration.
Example: Sand and gravel. Fill factor ~ 105%. Density 1,6 t/m3. 4,9 m3 5,4 4,9
Result: The 5,2 m3 bucket carries 5,5 m3. For optimum stability always consult
purpose
General
~ 110
Light
8,2 m3 8,2
The size of rock buckets is optimized for optimal penetration and filling capability
rather than the density of the material.
* Including counterweight
Supplemental Operating Data
Standard boom Long boom
Tires 29.5 R25 L4 29.5 R25 L3 29.5 R25 L5 875/65 R29 L4 29.5 R25 L3 29.5 R25 L5 875/65 R29 L4
Tipping load, full turn kg -100 +1010 +180 -90 +930 +180
27
equipments
STANDARD EQUIPMENT
L150G L180G L220G • Low engine oil pressure
Service and maintenance • High crankcase pressure
Engine oil remote drain and fill • • • • High charge-air temperature
Transmission oil remote drain and fill • • • Engine shutdown to idle in case of malfunction indication: • • •
Lubrication manifolds, ground accessible • • • • High transmission oil temperature
Pressure check connections: transmission and hydraulic, • • • • Slip in transmission clutches
quick-connects Keypad, background lit • • •
Tool box, lockable • • • Start interlock when gear is engaged • • •
CareTrack • • • Drivetrain
Telematics, 3-Year Subscription • • • Automatic Power Shift • • •
Engine Fully automatic gearshifting, 1-4 • • •
Exhaust after-treatment system • • • PWM-controlled gearshifting • • •
Three stage air cleaner, pre-cleaner, primary and • • • Forward and reverse switch by hydraulic lever console • • •
secondary filter Indicator glass for transmission oil level • • •
Indicator glass for coolant level • • • Differentials: • • •
Preheating of induction air • • • Front, 100% hydraulic diff lock. Rear, conventional.
Fuel pre-filter with water trap • • • OptiShift • • •
Fuel filter • • • Brake system
Crankcase breather oil trap • • • Dual brake circuits • • •
Exhaust heat insulation • • • Dual brake pedals • • •
Exterior radiator air intake protection • • • Secondary brake system • • •
Electrical system Parking brake, electrical-hydraulic • • •
24 V, pre-wired for optional accessories • • • Brake wear indicators • • •
Alternator 24V/ 80A • • • Cab
Battery disconnect switch with removable key • • • ROPS (ISO 3471), FOPS (ISO 3449) • • •
Fuel gauge • • • Single key kit door/start • • •
Hour meter • • • Acoustic inner lining • • •
Electric horn • • • Ashtray • • •
Instrument cluster: • • • Cigarette lighter, 24 V power outlet • • •
• Fuel level Lockable door • • •
• Transmission temperature Cab heating with fresh air inlet and defroster • • •
• Coolant temperature Fresh air inlet with two filters • • •
• Instrument lighting Automatic heat control • • •
Lighting: • • • Floor mat • • •
• Twin halogen front headlights with high and low beams Dual interior lights • • •
• Parking lights Dual interior rear-view mirrors • • •
• Double brake and tail lights Dual exterior rear-view mirrors • • •
• Turn signals with flashing hazard light function Sliding window, right side • • •
• Halogen work lights (2 front and 2 rear) Tinted safety glass • • •
Contronic monitoring system Retractable seatbelt (SAE J386) • • •
Monitoring and logging of machine data • • • Adjustable steering wheel • • •
Contronic display • • • Storage compartment • • •
Fuel consumption • • • Document pocket • • •
Ambient temperature • • • Sun visor • • •
Clock • • • Beverage holder • • •
Test function for warning and indicator lights • • • Windshield washer front and rear • • •
Brake test • • • Windshield wipers front and rear • • •
Test function, sound level at max fan speed • • • Interval function for front and rear wipers • • •
Warning and indicator lights: • • • Hydraulic system
• Battery charging
Main valve, double acting 2-spool with hydraulic pilots • • •
• Parking brake
Variable displacement axial piston pumps (3) for: • • •
Warning and display message: • • •
1 Working hydraulic system
• Regeneration
2 Working hydraulic system,
• Engine coolant temperature
Steering- and Brake system
• Charge-air temperature
3 Cooling fan and Brake system
• Engine oil temperature
Electro-hydraulic servo controls • • •
• Engine oil pressure
• Transmission oil temperature Electric level lock • • •
• Transmission oil pressure Boom kick-out, automatic • • •
• Hydraulic oil temperature Bucket positioner, automatic • • •
• Brake pressure Double-acting hydraulic cylinders • • •
• Parking brake applied Indicator glass for hydraulic oil level • • •
• Brake charging Hydraulic oil cooler • • •
• Overspeed at direction change External equipment
• Axle oil temperature Fenders, front and rear • • •
• Steering pressure Viscous cab mounts • • •
• Crankcase pressure Rubber engine and transmission mounts • • •
• Attachment lock open Easy-to-open side panels • • •
Level warnings: • • • Frame, joint lock • • •
• Fuel level Vandalism lock prepared for • • •
• Engine oil level • Batteries
• Engine coolant level • Engine compartment
• Transmission oil level • Radiator grille
• Hydraulic oil level Lifting eyes • • •
• Washer fluid level Tie-down eyes • • •
Engine torque reduction in case of malfunction indication: • • •
Tow hitch • • •
• High engine coolant temperature
Counterweight, pre-drilled for optional guards • • •
• High engine oil temperature
28
OPTIONAL EQUIPMENT
L150G L180G L220G Drivetrain
Service and maintenance Diff lock front 100%, Limited Slip rear • • •
Automatic lubrication system • • • Speed limiter, 20 km/h • • •
Automatic lubrication system for long boom • • • Speed limiter, 30 km/h • • •
Grease nipple guards • • • Speed limiter, 40 km/h •
Oil sampling valve • • • Wheel/axle seal guards • • •
Refill pump for grease to lube system • • • Brake system
Tool kit • • • Oil cooler and filter front & rear axle • • •
Wheel nut wrench kit • • • Stainless steel, brake lines • •
Engine Hydraulic system
Air pre-cleaner, cyclone type • • • Attachment bracket, welded • • •
Air pre-cleaner, cyclone type, two-stage • • • Boom suspension system • • •
Air pre-cleaner, oil-bath type • • • Separate attachment locking, standard boom • • •
Air pre-cleaner, turbo type • • • Separate attachment locking, long boom • • •
Radiator corrosion protection • • • Arctic kit, attachment locking hoses and 3rd hydr. • • •
Engine auto shutdown • • • function
Engine block heater 230V/110V • • • Arctic kit, pilot hoses and brake accum. incl. hydr. oil • • •
ESW, Disabled engine protection • • • Boom cylinder hose and tube guards • • •
Air intake protection (for grill in waste) • • • Boom cylinder hose and tube guards for long boom • • •
Fuel fill strainer • • • Hydraulic fluid, biodegradable, Volvo • • •
Fuel heater • • • Hydraulic fluid, fire-resistant • • •
Hand throttle control • • • Hydraulic fluid, for hot climate • • •
Max. fan speed, hot climate • • • Electro-hydraulic function, 3rd • • •
Radiator, corrosion-protected • • • Electro-hydraulic function, 3rd for long boom • • •
Reversible cooling fan • • • Electro-hydraulic function, 3rd-4th • • •
Reversible cooling fan and axle oil cooler • • • Electro-hydraulic function, 3rd-4th for long boom • • •
Fuel filter, extra • • • Electro-hydraulic servo controls for long boom • • •
Electrical system External equipment
Alternator, 80 A with air filter • • • Cab ladder, rubber-suspended • • •
Anti-theft device • • • Deleted front mudguards • • •
Headlights, assym. left • • • Mudguard widener, front/rear for 80-series tires • • •
License plate holder, lighting • • • Mudguard widener, front/rear for 65-series tires • • •
Rear view camera incl. monitor, colour • • • Fire suppression system • • •
Rear-view mirrors, adjustable, el.heated • • • Mudguards, full cover, rear for 80-series tires • • •
Rear view mirrors, Long arm • • • Mudguards, full cover, rear for 65-series tires • • •
Rear view mirrors, adjustable, el.heated, Long arm • • • Long boom • • •
Reduced function working lights, • • • Long boom for electro-hydraulic • • •
reverse gear activated Protective equipment
Reverse alarm • • • Belly guard front • • •
Reverse warning light, strobe lighting • • • Belly guard rear • • •
Shortened headlight support brackets • • • Belly guard rear, oil pan • • •
Side marker lamps • • Cover plate, heavy-duty, front frame • • •
Rotating beacon • • • Cab roof heavy duty • • •
Working lights, attachments • • • Guards for front headlights • • •
Working lights front, high intensity discharge (HID) • • • Guards for radiator grill • • •
Working lights front, on cab, dual • • • Guards for tail lights • • •
Working lights front, extra • • • Windows, side and rear guards • • •
Working lights rear, on cab • • • Windshield guard • • •
Working lights rear, on cab, dual • • • Corrosion protection, painting of machine • • •
Cab Corrosion protection, painting of attachment bracket • •
Anchorage for Operator’s manual • • • Bucket Teeth protection • •
Automatic Climate Control, ACC • • • Other equipment
ACC control panel, with Fahrenheit scale • • • CE-marking • • •
Asbestos dust protection filter • • • Comfort Drive Control (CDC) • • •
Cab air pre-cleaner, cyclone type • • • Counterweight, logging • • •
Carbon filter • • • Counter weight, block handling •
Cab roof, heavy-duty • • • Counterweight, re-handling • • •
Cover plate, under cab • • • Counterweight, signal painted, chevrons • • •
Lunch box holder • • • Log pusher • • •
Armrest, operator’s seat, ISRI, left only • • • Secondary steering with automatic test function • • •
Operator’s seat, KAB, air susp, heavy-duty, for CDC • • • Sound decal, EU • • •
and/or elservo Noise reduction kit, exterior • • •
Operator’s seat, ISRI, air susp, heat, high back • • • Sign, slow moving vehicle • •
Radio installation kit incl. 11 amp 12 volt outlet, left side • • • CareTrack, GSM • • •
Radio installation kit incl. 11 amp 12 volt outlet, right side • • • CareTrack, GSM/Satellite • • •
Radio installation kit incl. 20 amp 12 volt outlet • • • Tires
Radio with CD-player • • • 26.5 R25 • •
Seatbelt, 3”, (width 75 mm) • • • 29.5 R25 •
Steering wheel knob • • • 775/65 R29 • •
Sun blinds, rear windows • • • 875/65 R29 •
Sun blinds, side windows • • •
Timer cab heating • • •
Window, sliding, door • • •
Universal door/ignition key • • •
Front view mirror • • •
29
equipments
OPTIONAL EQUIPMENT SELECTION OF VOLVO OPTIONAL EQUIPMENT
L150G L180G L220G
Attachments
Buckets:
• Rock straight or spade nose • • •
• General purpose • • •
• Re-handling • • •
• Side-dump • Comfort Drive Control (CDC)
• Light material • • •
Wear parts:
• Bolt-on and weld-on bucket teeth • • •
• Segments • • •
• Cutting edge in three sections, bolt-on • • •
Fork equipment • • •
Material handling arm • • •
Log grapples • • •
Rear-view camera
30
31
volvo construction equipment
Volvo Construction Equipment is different. Our machines are designed, built and supported in a different way.
That difference comes from an engineering heritage of over 175 years. A heritage of thinking first about the people
who actually use the machines. About how to help them be safer, more comfortable, more productive.
About the environment we all share. The result of that thinking is a growing range of machines and a global support network
dedicated to helping you do more. People around the world are proud to use Volvo.
And we’re proud of what makes Volvo different.
Not all products are available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice.
The illustrations do not necessarily show the standard version of the machine.