Escolar Documentos
Profissional Documentos
Cultura Documentos
GENERAL DESCRIPTION
The Lab-Volt Power Electronics Devices can be added half-size EMS modules equipped with a steel front panel.
to the 2 kW Electromechanical Training System (Model Internal electrical components are identified on the
8013) to allow training in power electronics. The Power module front panel by silkscreened symbols and termi-
Electronics Devices are used to filter and convert nated by 4 mm safety banana jacks.
electrical power flowing in electric circuits.They come as
Model 8323-1 – Smoothing Inductor These jacks can also be used to inject 0/5 V pulse
signals from an alternate control unit, as well as to inhibit
each gating circuit. The IGBT Chopper/Inverter module
also includes a synchronization output to trigger an
oscilloscope when observing the switching control
signals as well as a switching control disable input that
allows all six IGBTs in the chopper/inverter section to be
switched off.
ORDERING NUMBERS
120 V – 60 Hz 220 V – 50 Hz 240 V – 50 Hz
ENGLISH FRENCH SPANISH ENGLISH FRENCH SPANISH ENGLISH
8323-10 8323-11 8323-12 TBE TBE TBE TBE
8857-10 8857-11 8857-12 TBE TBE TBE TBE
8861-00 8861-01 8861-02 TBE TBE TBE TBE
Lab-Volt reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Lab-Volt recognizes all product
names used herein as trademarks or registered trademarks of their respective holders. © Lab-Volt 2011. All rights reserved.
88130-00