Escolar Documentos
Profissional Documentos
Cultura Documentos
BAA/ARRA Compliant**
**This product complies with the Buy American Act and The American Recovery and Reinvestment Act. For more information, visit watts.com.
Features
Cast iron body Wye-pattern Tapped retainer cap Threaded connections
Pressure Temperature
Maximum Working Pressure: 400psi (27.6 bar) at 150F (66C) WOG 250psi (17.2 bar) at 406F (208C) WSP
Specifications
A wye-pattern cast iron strainer to be installed as indicated on the plans. The strainer must have a tapped retainer cap and threaded end connections. Strainer shall be rated to 400psi (27.6 bar) WOG at 150F (66C); 250psi (17.2 bar) WSP at 406F (208C). Strainer shall be a Watts Series 77S.
Standards
Complies with MIL-S-16293 Type 1
Materials
Body: ASTM A-126 Class B cast iron Retainer Cap: ASTM A-126 Class B cast iron Screen: Stainless Steel Gasket: PTFE
*The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Standard Screens
1 4
Performance Data
Screen Openings Materials
14
Size in.
1 2
mm
" - 212" (8-65mm): #20 Mesh screen 3" (80mm): 364" perforated screen
/ -2/ 3
8-65 80
20 mesh 3/64"perf
304SS 304SS
For performance data for nonstandard screens and liners, please consult factory.
mm
Options
Wire mesh liners: 304 stainless steel (#40, #60, #80, #100)
Pressure Drop - psi
100 80 60 50 40 30 20 10 8 6 5 4 3 2 1 .8 .6 .5 .4 .3 .2 0.1
2 3 4 5 6 8
4 "
mm mm
3
10 15
8" 12"
mm
3
20 25 32 40
mm mm
mm
mm
50
2 12" 65 3" 80
mm
mm
10
20 30 40
6080
Flow - gpm
100
200
400
1000
Conversions: For gpm to lpm, multiply by 3.8. For psi to bar, multiply by .069
Cap
C NPT
Dimensions Weights
Model In. Size A mm in. mm in. Dimensions B mm in. C (NPT) mm lbs. kgs. Weights
77S 77S 77S 77S 77S 77S 77S 77S 77S 77S
M1 M1 M1 M1 M1 M1 M1 M1 M1 M1
8 10 15 20 25 32 40 50 65 80
38 38 12 34 34 34 34 1 112
38
10 10 10 15 20 20 20 20 25 40
1.3 1.3 1.3 1.7 3.7 4.6 6.4 11.6 15.5 26.0
USA: No. Andover, MA Tel. (978) 688-1811 Fax: (978) 794-1848 www.watts.com Canada: Burlington, ONT. Tel. (905) 332-4090 Fax: (905) 332-7068 www.wattscanada.ca
ES-77S-M1 1038
2010 Watts