Escolar Documentos
Profissional Documentos
Cultura Documentos
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
Chapter 25 – Issued 3-2010.
Introduction
The Heavy Duty Sealed The HDSCS program consists Technical Features
Connector Series, so called of five groups of connectors in
HDSCS, is targeted for the different sizes, starting from High reliability status
commercial vehicle industry 2 up to 18 way connectors. In supported for long term use
and off-road applications. addition, mixed combinations High vibration level supported
This wire-to-wire and wire-to- with signal and power lines
device connector program was are available. Perfect design to avoid
designed to meet the rigorous quality problems, reduce
This HDSCS program will manufacturing and service
demands of an industry that feature the AMP MCP 1.5K,
requires the highest standards cost
AMP MCP 2.8 and AMP MCP
in performance. 6.3/4.8K receptacles and tabs Integrated secondary
as a contact system. locking device delivered in
pre-locked position
Polarization, several keyings
Clear handling, low mating
force with a reliable slide
locking mechanism delivered
in pre-locked position
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-1
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
Chapter 25 – Issued 3-2010.
Engineering Notes
25-2 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
Contact Systems Chapter 25 – Issued 3-2010.
Introduction
The AMP MCP Contact Protection of the contact The main advantages of the
System is mainly used in the springs body are:
automotive industry. Each No over elongation of the Several contact points
contact consists of a flat contact springs possible Large range of wire sizes
receptacle, which mates with under normal circum- (from 0.2 mm2 at AMP
a flat tab. Every contact has stances MCP 1.5K up to 6.0 mm2
got a steel spring and a
No possibility to connect at AMP MCP 6.3/4.8K)
copper alloy body.
from the rear side Base material with very
The two-piece contact design Protection against high current capability
means that the electrical and mechanical damage High vibrational load
mechanical properties are
Good guiding in the cavity
separated. One end of the
contact body is crimped to Secondary locking possible Tabs and receptacles can be
wire and the other end mates (from 4 directions) applied in both sealed and
with the matching tab. The Assembly into housing fully- unsealed connectors.
closed spring has got several automatically AMP MCP contacts can
functions and also different be fast and economically
advantages for the complete In addition there are usually arranged to the lead using
contact system. two lances on the steel to Tyco Electronics application
spring. These serve to lock tooling.
the contact securely in the
housing.
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-3
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP 1.5K Contact System Chapter 25 – Issued 3-2010.
Technical Features
Contact Material:
CuNiSi
Top Spring: Stainless Steel 0.25
2.7
Contact Finish:
Tin plated, selective silver plated,
selective gold plated
10.6
Wire Size Range:
0.20–0.35 mm2, 0.5–1.0 mm2,
>1.0–1.5 mm2 (FLR Cable) 19.8
25-4 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP 1.5K Contact System Chapter 25 – Issued 3-2010.
0.6
Extraction Tool:
Part No. 539960-1
Product Group Drawing:
1355055
Product Specification: 0.8
0.6
108-18331
Application Specification:
114-18082
8.0 5.7
Tab Contacts Single Wire Sealing System with Modified Spring (SWS)
Insulation Diameter Part Numbers
Wire Size (mm) Material Hand
Range
and Finish Strip Package Loose- Package Applicator
Tool
(mm2 ) Form Quantity Piece Quantity
FLK FLR Complete
0.2–0.5 – 1.2–1.6 -2 / -3 969028 2) 4,000 969029 2) 500 x-1528068-x
2063409-1
0.5–1.0 – 1.4–2.1 -2 / -3 / -5 964269 2) 4,000 964270 2) 500 x-1528261-x
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-5
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP 1.5K Contact System Chapter 25 – Issued 3-2010.
⭋ 2.6 ⭋ 3.9
4.3
7.8
Insulation
Package
Diameter Color Part Number
Quantity
(mm)
⭋ 3.6
1.5 +1.5
Sealing Plug
25-6 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP 2.8 Contact System Chapter 25 – Issued 3-2010.
Technical Features
Material:
20.2
Contact: CuNiSi
Tabs: CuSn4, CuFe2
Top Spring: Stainless Steel
Contact Finish: 0.32
Tin plated, selective silver plated, 4.4
selective gold plated
Wire Size Range:
0.2–0.5 mm2, 0.5–1.0 mm2,
1.0–2.5 mm2, Single Wires (FLR), max. 0.3
AWG 12 TXL
Current Carrying Capacity:
up to 40 Ampere
(at 20 °C ambient temperature)
Mating Force: 3.1
Max. 6 N
Unmating Force:
Max. 5 N
Mating Cycles:
up to 20 cycles (tin plated)
up to 50 cycles (silver plated)
up to 100 cycles (gold plated) Temperature Range: Contact Resistance: Product Specification:
–40 °C ... +130 °C (tin plated) New State ⱕ2 m⍀ 108-18513
) Steel Tab, see Specifications –40 °C ... +140 °C (silver plated)
–40 °C ... +150 °C (gold plated) Extraction Tool: Application Specification:
) Mating Cycles are depending Part No. 1579007-1 114-18148
on various technical influences Dimension of Male Contacts:
and must be clarified in each 2.8 ±0.1 x 0.8 ±0.03 mm Product Group Drawing:
individual case. 3.0 ±0.1 x 0.8 ±0.03 mm 1355036
Material and Finish: ) The pre- and suffix for the
1-xxx-1 = CuNiSi, pre-tin plated applicators depends on the
1-xxx-2 = CuNiSi, selective gold plated applied termination equipment.
1-xxx-3 = CuNiSi, selective silver plated
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-7
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP 2.8 Contact System Chapter 25 – Issued 3-2010.
0.32
Extraction Tool: 2.8
1.4
) Material and Finish: ) The pre- and suffix for the
1-xxx-1 = CuSn, pre-tin plated applicators depends on the
1-xxx-2 = CuSn, selective silver plated applied termination equipment.
1-xxx-3 = CuSn, selective gold plated
2-xxx-1 = CuFe, pre-tin plated
2-xxx-2 = CuFe, selective silver plated
2-xxx-3 = CuFe, selective gold plated
3-xxx-1 = CuSn, pre-tin plated
25-8 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP 2.8 Contact System Chapter 25 – Issued 3-2010.
⭋ 3.4
7.8
冸 冹
Function Relevant Example for Wire Size,
Diameter
Insulation FLR Insulation Part Package
Color A
Diameter according ISO 6722 Number Quantity
(mm)
(mm) (mm2 )
828904-1 1,000
1.2–2.1 (0.35–1.00) Blue 5.6
828904-2 10,000
(2.2–3.0, 3.2) (1.5–2.5), AWG 12 TXL White 5.6 828905-1 10,000
Sealing Plug – Natural 5.6 828922-1 10,000
⭋ 5.2
Sealing Plug
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-9
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP 6.3/4.8K Contact System Chapter 25 – Issued 3-2010.
Technical Features
Contact Material:
CuNiSi
Top Spring: Stainless Steel
Contact Finish:
Tin plated, selective silver plated
6.9
0.4
Wire Size Range:
0.2–0.5 mm2, 0.5–1.0 mm2,
> 1.0–2.5 mm2, >2.5–4.0 mm2,
>4.0–6.0 mm2
Current Carrying Capacity: 10.6
up to 40 Ampere
(at 20 °C ambient temperature) 19.0 / 20.0
Temperature Range:
–40 °C ... +130 °C (tin plated)
–40 °C ... +140 °C (silver plated)
–40 °C ... +140 °C (tin-silver)
Dimension of Male Contacts:
4.9 4.1
4.8 ±0.1 x 0.8 ±0.03 mm
5.8 ±0.1 x 0.8 ±0.03 mm
6.3 ±0.1 x 0.8 ±0.03 mm
Contact Resistance:
New State ⱕ2 m⍀
Mating Cycles:
up to 10 cycles (tin plated)
up to 10 cycles (silver plated)
) Mating Cycles are depending Mating Force: Extraction Tool: Product Specification:
on various technical influences max. 16 N Part No. 1-1579007-3 108-18718
and must be clarified in each
individual case. Unmating Force: Product Group Drawing: Application Specification:
max. 11 N 1241438 114-18388
25-10 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP 6.3/4.8K Contact System Chapter 25 – Issued 3-2010.
0.38
5.8
Extraction Tool:
Part No. 1-1579007-6
1.4
Product Group Drawing:
1241895
Product Specification:
9.5 6.0
108-18064
0.8
Application Specification:
114-18052
1.6
) Material and Finish: ) The pre- and suffix for the
1-xxx-1 = CuSn, pre-tin plated applicators depends on the
1-xxx-2 = CuSn, selective silver plated applied termination equipment.
2-xxx-1 = CuFe, pre-tin plated
2-xxx-2 = CuFe, selective silver plated
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-11
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP 6.3/4.8K Contact System Chapter 25 – Issued 3-2010.
⭋ 6.0 ⭋ 9.0
4.3
8.0
⭋ 8.5
25-12 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Introduction
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-13
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
Product Specification:
108-94020
Application Specification:
114-18756
18.5
10.0
25-14 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
Product Specification:
108-94020
Application Specification:
114-18756
37.5
19.0 29.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-15
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
Product Specification:
108-94020
Application Specification:
114-18756
18.5
10.0
2
Black / Green 3-1418448-2
1-1670730-1
Black / Black 1-1418448-1
1-1703843-1
2-1670730-1
Black / Gray 2-1418448-1
2-1703843-1
3
3-1670730-1
Black / Green 3-1418448-1
3-1703843-1
4-1670730-1
Black / Blue 4-1418448-1
4-1703843-1
) Available on request.
25-16 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
No. of Positions:
2 and 3 Positions
Housing Material:
Glass Reinforced PBT 47.1 47.1
19.0 29.8
Black 1-1418448-2
Gray 2-1418448-2
2
Green 3-1418448-2
Blue 4-1418448-2
Black 1-1703843-1 1-1670730-1 1-1418448-1
Gray 2-1703843-1 2-1670730-1 2-1418448-1
3
Green 3-1703843-1 3-1670730-1 3-1418448-1
Blue 4-1703843-1 4-1670730-1 4-1418448-1
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-17
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Group A: Accessories
Accessories
25-18 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
25.7
12.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-19
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
No. of Positions:
4 Positions 27.6 37.5
Housing Material:
Glass Reinforced PBT
Wire Size Range:
2.5 mm2 FLR max.
AWG 12 TXL max. 48.1 48.1
Product Specification:
108-94020
Application Specification:
114-18756
27.0 39.8
25-20 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
25.7
12.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-21
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
6 Positions
Housing Material:
Glass Reinforced PBT
Wire Size Range:
1.0 mm2 FLR max. 47.1 47.1
Product Specification:
108-94020
Application Specification:
114-18756
27.0 39.8
25-22 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Group B: Accessories
Accessories
Vertical adapter 4/7 position for jacketed cable 5.2 – 6.5 mm Black 1418916-1
Vertical adapter 4/7 position for jacketed cable 6.0 – 9.5 mm Black 1418917-1
Right-angle adapter 4/7 position for jacketed cable 5.2 – 6.5 mm Black 1418918-1
Right-angle adapter 4/7 position for jacketed cable 6.0 – 9.5 mm Black 1418919-1
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-23
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
No. of Positions:
44.0
6 Positions
Housing Material:
Glass Reinforced PBT
Wire Size Range:
2.5 mm2 FLR max. 31.3
AWG 12 TXL max.
Product Specification:
108-94020
Application Specification:
114-18756
25.7
12.8
Black / Gray 2-1418437-1
6
Black / Green 3-1418437-1
Black / Blue 4-1418437-1
25-24 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
No. of Positions:
44.0
7 Positions
Housing Material:
Glass Reinforced PBT
Wire Size Range:
• 1.5 mm2 FLR max. 31.3
AWG 16 TXL max.
• 2.5 mm2 FLR max.
AWG 12 TXL max.
Product Specification:
108-94020
Application Specification:
114-18756
25.7
12.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-25
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
No. of Positions:
7 Positions
Housing Material:
Glass Reinforced PBT
Wire Size Range: 48.1 48.1
27.0
39.8
) Suitable fixing slide see accessories.
25-26 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
No. of Positions:
44.0
8 Positions
Housing Material:
Glass Reinforced PBT
Wire Size Range:
1.5 mm2 FLR max. 31.3
AWG 16 TXL max.
Product Specification:
108-94020
Application Specification:
114-18756
25.7
12.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-27
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
No. of Positions:
8 Positions
Housing Material:
Glass Reinforced PBT
Wire Size Range: 47.1 47.1
1.0 mm2 FLR max.
Product Specification:
108-94020
Application Specification:
114-18756
32.6 42.5
27.0 39.8
25-28 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
No. of Positions:
44.0
2 Positions
Housing Material:
Glass Reinforced PBT
Wire Size Range:
6.0 mm2 FLR max. 31.3
Product Specification:
108-94020
Application Specification:
114-18756
25.7
12.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-29
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
2 Positions
Housing Material:
Glass Reinforced PBT
Wire Size Range:
6.0 mm2 FLR max.
50.6 50.6
Product Specification:
108-94020
Application Specification:
114-18756
32.6
27.0 39.8
25-30 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Group C: Accessories
Accessories
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-31
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
25.7
14.9
25-32 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
Product Specification:
108-94020
Application Specification:
114-18756
40.6
27.0 39.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-33
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
No. of Positions:
8 Positions 54.1
Housing Material:
Glass Reinforced PBT
Wire Size Range:
2.5 mm2 FLR max.
AWG 12 TXL max. 31.3
Product Specification:
108-94020
Application Specification:
114-18756
25.7
14.9
25-34 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
27.0 39.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-35
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
No. of Positions:
10 Positions 54.1
Housing Material:
Glass Reinforced PBT
Wire Size Range:
• 1.5 mm2 FLR max.
AWG 16 TXL max. 31.3
25.7
14.9
25-36 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
27.0 39.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-37
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Group D: Accessories
Accessories
25-38 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
25.7
16.0
) Available on request.
Other variants are available on request.
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-39
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
25.7
16.0
25-40 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
27.0 39.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-41
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
25.7
16.0
25-42 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
27.0 39.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-43
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
25.7
16.0
25-44 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
18 Positions
Housing Material:
Glass Reinforced PBT
Wire Size Range:
1.0 mm2 FLR max. 47.1 47.1
Product Specification:
108-94020
Application Specification:
114-18756
52.6
27.0 39.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-45
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
25.7
16.0
25-46 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Technical Features
52.6
27.0 39.8
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-47
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
AMP MCP Housings and Connectors Chapter 25 – Issued 3-2010.
Group E: Accessories
Accessories
Vertical adapter for NW 17 mm diameter corrugated tubing and hose Black 1670866-1
Right-angle adapter for NW 17 mm diameter corrugated tubing and hose Black 1670865-1
25-48 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
Chapter 25 – Issued 3-2010.
Numerical Index
Part Number Page Part Number Page Part Number Page Part Number Page
All specifications subject to change. Consult Tyco Electronics for latest specifications. 25-49
Section Catalog 1654282-3.
Revised 12-2009.
Heavy Duty Sealed Connector Series (HDSCS) Main Catalog 1654400-1
Chapter 25 – Issued 3-2010.
Numerical Index
Part Number Page Part Number Page Part Number Page Part Number Page
2-1564514-1 25-36, 25-37 4-1564532-1 25-40, 25-41 1-1670730-1 25-16, 25-17 3-1703818-1 25-19, 25-20
3-1564514-1 25-36, 25-37 1-1564534-1 25-46, 25-47 2-1670730-1 25-16, 25-17 4-1703818-1 25-19, 25-20
4-1564514-1 25-36, 25-37 2-1564534-1 25-46, 25-47 3-1670730-1 25-16, 25-17 1-1703820-1 25-21, 25-22
1-1564516-1 25-36, 25-37 3-1564534-1 25-46, 25-47 4-1670730-1 25-16, 25-17 2-1703820-1 25-21, 25-22
2-1564516-1 25-36, 25-37 4-1564534-1 25-46, 25-47 1670865-1 25-48 3-1703820-1 25-21, 25-22
3-1564516-1 25-36, 25-37 1-1564542-1 25-29, 25-30 1670866-1 25-48 4-1703820-1 25-22
4-1564516-1 25-36, 25-37 2-1564542-1 25-29, 25-30 1-1670894-1 25-34, 25-35 1703838-1 25-18
1-1564518-1 25-36, 25-37 3-1564542-1 25-29, 25-30 2-1670894-1 25-34, 25-35 1703838-2 25-18
2-1564518-1 25-36, 25-37 4-1564542-1 25-29, 25-30 3-1670894-1 25-34, 25-35 1-1703841-1 25-14, 25-15
3-1564518-1 25-36, 25-37 1-1564544-1 25-29, 25-30 4-1670894-1 25-34, 25-35 2-1703841-1 25-14, 25-15
4-1564518-1 25-36, 25-37 2-1564544-1 25-29, 25-30 1-1670901-1 25-39 3-1703841-1 25-14, 25-15
1-1564520-1 25-32, 25-33 3-1564544-1 25-29, 25-30 2-1670901-1 25-39 4-1703841-1 25-14, 25-15
2-1564520-1 25-32, 25-33 4-1564544-1 25-29, 25-30 3-1670901-1 25-39 1-1703843-1 25-16, 25-17
3-1564520-1 25-32, 25-33 1-1564546-1 25-29, 25-30 4-1670901-1 25-39 2-1703843-1 25-16, 25-17
4-1564520-1 25-32, 25-33 2-1564546-1 25-29, 25-30 1-1703639-1 25-33 3-1703843-1 25-16, 25-17
1-1564522-1 25-34, 25-35 3-1564546-1 25-29, 25-30 2-1703639-1 25-33 4-1703843-1 25-16, 25-17
2-1564522-1 25-34, 25-35 4-1564546-1 25-29, 25-30 3-1703639-1 25-33 1718705-1 25-60
3-1564522-1 25-34, 25-35 1564562-1 25-38 4-1703639-1 25-33 1719043-1 25-12
4-1564522-1 25-34, 25-35 1564562-2 25-38 1-1703648-1 25-25, 25-26 1-1719503-1 25-80
1-1564526-1 25-44, 25-45 1564562-5 25-38 2-1703648-1 25-25, 25-26 1-1719503-2 25-80
2-1564526-1 25-44, 25-45 1579007-1 25-70 3-1703648-1 25-25, 25-26 1-1719504-1 25-80
3-1564526-1 25-44, 25-45 1-1579007-1 25-40 4-1703648-1 25-25, 25-26 1-1719504-2 25-80
4-1564526-1 25-44, 25-45 1-1579007-3 25-10 1-1703773-1 25-21, 25-22 1-1719506-1 25-70
1-1564528-1 25-42, 25-43 1-1579007-6 25-8,0 25-11 2-1703773-1 25-21, 25-22 1-1719506-3 25-70
2-1564528-1 25-42, 25-43 1670057-1 25-31 3-1703773-1 25-21, 25-22 2063409-1 25-50
3-1564528-1 25-42, 25-43 1670150-1 25-18 4-1703773-1 25-21, 25-22 2063490-1 25-80
4-1564528-1 25-42, 25-43 1-1670214-1 25-25, 25-26 1-1703808-1 25-19, 25-20 2063523-1 25-70
1-1564530-1 25-40, 25-41 2-1670214-1 25-25, 25-26 2-1703808-1 25-19, 25-20 2063524-1 25-40
2-1564530-1 25-40, 25-41 3-1670214-1 25-25, 25-26 3-1703808-1 25-19, 25-20 2063623-1 25-70
3-1564530-1 25-40, 25-41 4-1670214-1 25-25, 25-26 4-1703808-1 25-19, 25-20 2063624-1 25-70
4-1564530-1 25-40, 25-41 1670364-1 25-31 1703810-1 25-23 2063625-1 25-10
1-1564532-1 25-40, 25-41 1670365-1 25-18 1703810-2 25-23 2063626-1 25-10
2-1564532-1 25-40, 25-41 1670720-1 25-31 1-1703818-1 25-19, 25-20 2063627-1 25-10
3-1564532-1 25-40, 25-41 1670720-2 25-31 2-1703818-1 25-19, 25-20 2063628-1 25-11
Disclaimer
While Tyco Electronics and its affiliates referenced herein have made every reasonable effort to ensure the accuracy
of the information contained in this catalog, Tyco Electronics cannot assure that this information is error free. For this
reason, Tyco Electronics does not make any representation or offer any guarantee that such information is accurate,
correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information at any
time. Tyco Electronics expressly disclaims any implied warranty regarding the information contained herein, including,
but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only
obligations are those stated in Tyco Electronics’ Standard Terms and Conditions of Sale. Tyco Electronics will in no
case be liable for any incidental, indirect or consequential damages arising from or in connection with, including, but
not limited to, the sale, resale, use or misuse of its products. Users should rely on their own judgment to evaluate the
suitability of a product for a certain purpose and test each product for its intended application.
In case of any potential ambiguities or questions, please don’t hesitate to contact us for clarification.
www.tycoelectronics.com
www.tycoelectronics.com/automotive
AMP, AMP MCP, TE (Logo) and Tyco Electronics are trademarks of the Tyco Electronics Group of Companies and
its Licensors.
25-50 All specifications subject to change. Consult Tyco Electronics for latest specifications.