Escolar Documentos
Profissional Documentos
Cultura Documentos
Vertical
Subsea Trees
Integrated offshore
offering for reliable,
high-quality, and capital-
efficient performance
Standard Vertical Subsea Trees
Since the 1980s, OneSubsea has delivered more ■■ Common core components, the
than 1,100 vertical tree systems to offshore global majority of which are interchangeable
locations. Of these, more than 300 were configured
with THSs and 800 with a tubing hanger for
with the horizontal tree system
wellhead installation. ■■ Ratings of 10,000 psi [689 bar] and
Vertical tree systems offer the lowest opex in 10,000-ft [3,048-m] water depth
multiple field types. The latest evolution of the
OneSubsea standard vertical monobore tree uses
■■ Deployability onto THS
qualified and field-proven technology that can be
configured to meet global functional requirements
to deliver maximum capital efficiency.
The standard vertical tree is built from a suite of preauthored quality control, material, welding, and
coating specifications that simplify and expedite our execution processes. OneSubsea works with
approved vendors to ensure that they can manufacture the required components, enabling high
confidence in quality and lead time.
Our welding procedure for subsea trees conforms There is one overall coating
procedure comprising two
to API Spec 6A, ASME Section IX, ASME Code
preferred subsea coating
B31.3, and NACE MR0175 / ISO 15156. Adhering to systems—one for temperatures
proven, tested, and repeatable processes enables up to 122 degF [50 degC] and
one high-temperature system for
OneSubsea to up to 302 degF [150 degC]. The
standard coating specification
■■ standardize welding specifications within and across
gives the requirements for surface
product lines and vendors
preparation, selection of coating
■■ provide a superior engineering design that meets materials, application procedures,
or exceeds industry specifications at a lower cost and inspection of protective
■■ deliver increased value by enhancing the product coatings to be applied on the
without incurring added costs. standard vertical tree.
Standard Vertical Tree
1. XT Valve 2. THS Valve 3. Tree and THS 4. Tubing Hanger 5. Tree Cap 6. Crossover 7. Flowline
5 Block Block Connector Valve Block Isolation
Valve Block
1
6 12
5- and 7-in nominal Lightweight tree cap
11
8 8. Choke 9. Actuators 10. Flowline Connector Hub 11. Annulus Wing
Valve Block
14
OR OR OR OR
9
Diver makeup CVC* flowline OneSubsea clamp
Compact choke 10,000 ft 5,000 ft and swivel flange connector hub system (OCS) vertical hub OCS horizontal hub
12. Chemical Injection 13. Downhole Hydraulic Control 14. Controls 15. Tree-to-THS
7 Metering Valve and Chemical Injection Clamp Connector
13
15 OR OR OR OR
4
High flow Medium flow Low flow Manual valve Hydraulic valve OneSubsea direct hydraulic controls OneSubsea-supplied controls OCS-V 100
16
2
16. Tree Frames Metering, Monitoring, and Instrumentation
3
10
OneSubsea offers a comprehensive suite
of measurement technology, including
pressure, temperature, water, and
erosion monitoring.
Third-generation PhaseWatcher*
Visible component subsea multiphase flowmeter with Vx* AquaWatcher* water Retrievable
Guidelineless frame (shown); guideline-installable design available. multiphase well testing technology analysis sensor process module
Not visible on the diagram
Inserted into another component
If you require a custom-tailored solution to meet your project objectives, please contact OneSubsea.
Vertical Monobore Tree
Vertical
Differentiation monobore tree
Debris cap
Vertical
monobore tree
Production choke
THS
Tree-to-THS
Tubing hanger clamp connector
Standard Vertical Subsea Trees
Integrated offshore offering for reliable, high-quality,
and capital-efficient performance
onesubsea.slb.com/standardization
*Mark of Schlumberger.
Other company, product, and service names
are the properties of their respective owners.
Copyright © 2018 Schlumberger. All rights reserved. 17-OSS-341149