Escolar Documentos
Profissional Documentos
Cultura Documentos
ROCK SUPPORT
BOLTER
TECHNICAL SPECIFICATION
Tool set for hydraulic adjustment Specification 2-9100 Operation Standing drilling, seated tramming
Sound pressure level
Operator station: 80 dB(A)
DRILLING CONTROL SYSTEM according to EN 16228
Type of control system THC560 (TS2-361) Operator’s seat Ergonomic T-back seat
Operating principle Hydraulic control Air conditioning Cooling only
Drilling anti-jamming Automatic
Drilling rotation speed Adjustable at control panel
Drilling feed thrust pressure Adjustable at control panel
Reduced for collaring
Drilling percussion pressure
Full for drilling (adjustable)
Drilling water flushing Automatic with percussion start
Drilling water / air flushing Manual selection
Bolting feed thrust pressure Dedicated bolt system (split set)
Bolting rotation speed Adjustable
Bolting tightening torque Adjustable
MySandvik insight Remote monitoring system
Hydraulic system
*Oil tank filling pump Electric
Electric system
*Optional voltage 1 000 V (50 or 60 Hz) with DOL starter
*Starting method Star delta 600 V - 690 V
*Electric cables Specification TS2-121
Ground fault and overcurrent VYK (N/A USC package)
protection
Auxiliary outlet 1 x 110 V or 1 x 230 V, 16 A
Battery jump start Optional
Dewatering pump outlet Max. 8 kW, 380 / 690 / 1 000 V
readiness N/A USC package
Amber flashing light LED (24 V)
C 5 260 2 100
4 090
SANDVIK
30° 36°
DS311
SANDVIK
DS311
45° 45°
4 010
5 070
5 215 TUC5 TUC6 TUC7 TUC8 TUC10
6 770 A (Maxi) mm 6 900 6 950 7 090 7 360 7 640
B (Optimum) mm 5 700 5 750 5 890 6 160 6 440
TS2-039:09/ENG/METRIC © Sandvik Mining and Rock Technology 2018 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
C (Mini) mm 3175 3 555 3 850 4 365 4 965
Overall length mm 11 365 11 495 11 655 11 855 12 160
2 920
(2 670*)
SANDVIK
DS 311
2 000
1 850 1 590
SANDVIK
3 100 DS 311
2 140
250 11 300
* With low cabin option
All dimensions in mm
** Optional boom
All dimensions in mm
Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.
ROCKTECHNOLOGY.SANDVIK