Você está na página 1de 4

RANGER 700

Technical Specification
05271-1

Rock pilot
2005-04-18

APPLICATION

Ranger 700 is a hydraulic, self-propelled, self- Ranger 700 has an ergonomic cabin to increase op-
contained, crawler based surface drilling rig erator's safety and visibility. The cabin is certified for
equipped with a cabin (F.O.P.S. and R.O.P.S.) and R.O.P.S. (ISO-3471 Roll-Over Protection Structure)
rod handling system. It drills vertical, inclined or hori- and F.O.P.S. (ISO-3449 Falling Object Protection
zontal holes with a diameter of 64 - 115 mm (2 ½" - Structure). Windows are laminated for added safety.
4 ½") utilizing 38, 45 or 51 mm (1 ½", 1 ¾" or 2") ex- The noise level in the cabin is less than 80 dB(A). To
tension rods. keep dust at a minimum, the cabin is fitted with effi-
Ranger 700 is equipped with HL 710, hydraulic top cient filters for incoming fresh air. Adjustable seat,
hammer rock drill. With high rotation torque, suffi- good visibility, adequate lighting and an optimum
cient flushing and sophisticated ergonomic drilling working temperature are among the many features
control system the rig is well suited also in very frac- ensuring a good operating environment. Drilling func-
tured rock conditions. The rock drill and articulated tions are proportionally controlled by one hydraulic
boom are mounted on the turnable superstructure joystick. Several routine functions e.g. antijamming
giving a drilling coverage of 17,6 m2 (optionally 26,4 are executed automatically. There are fewer levers
m2). to make it easy to use. Driving, rear jack and winch
control can be done outside the cabin from the op-
The powerpack of Ranger 700 consists of a Caterpil-
tional remote control box.
lar diesel engine and a gearbox, which divides the
power for hydraulic pumps and flushing air compres- Typical applications for Ranger 700 are road cutting,
sor. The powerpack is mounted crosswise at the rear pipeline drilling and foundation drilling, as well as
end of the superstructure to keep counterweight on production drilling in medium size quarries. There-
the opposite side of the boom and feed regardless of fore Ranger 700 is most often used by construction
the drilling direction. contractors, mines and quarries, and also included in
the equipment fleet of rental houses as well.

1/4
Technical Specification
05271-1 RANGER 700
2005-04-18
Rock Pilot

DRILLING DIMENSIONS

90º

30º

Optional 90º

1m
1m

TRANSPORT DIMENSIONS

3600

7200

7300
3200

10700 2590

2/4
Technical Specification
05271-1 RANGER 700
2005-04-18
Rock Pilot

HYDRAULIC ROCK DRILL HYDRAULIC SYSTEM


Rock drill type HL 710 Driving, boom and drilling Load sensing system
Drill rod diameters 38, 45, 51 mm Cooling and dust collector Open center
Operating pressure 100-190 bar Filtration rate 12 micron abs., return
Percussion rate 55 Hz 25 micron, pressure
Percussion output power 19.5 kW Cooling capacity up to +50°C ambient
Maximum rotation torque 1355 Nm Hydraulic oil tank 200 l
Shank lubrication Air / oil mist Shank lubrication device SLU 14-1
Flushing Air
Weight 245 kg
CONTROL SYSTEM
Driving control Pilot operated, hydraulic
CHAIN FEED AND ROD HANDLER Boom control Direct operated, hydraulic
Chain feed type CF 145H + RH 714 Drilling Pilot controlled (el/hydr.)
Length of feed 7 300 mm Rod handler Electric remote
Rock drill travel 4 915 mm Collaring control Stepless
Max. length of starter rod 5485 mm (18’) Percussion control Controlled by feed
Feed/pull out force 20 kN pressure (THC 700)
Travelling hose reel Optional Antijamming system Hydraulic
Front jaws Centralizing Pito 12H Voltage 24 VDC
Rod handler type RH 714
Storage capacity 6+1
Steel lengths 3050, 3660, 4265 mm DUST COLLECTION SYSTEM
(10', 12', 14') Dust collector type DC 800H
Max. hole depth with 29 m Capacity/vacuum 23 m3/min at 1 000 mm
4265 mm (14' ) MF-rods vacuum H2O
Filter elements/material 13 pcs/fiber
Feed extension travel 1350 mm
-56°/+52° (-20°/+94°) Total filter surface 10.4 m2
Feed swing
Hydraulic motor output 12 kW
Feed tilt 125°
Weight 200 kg
Weight without steels 1 200 kg

POWERPACK CARRIER
Engine type Caterpillar 3126 B Track type FL 6
Max. tilt angles +/- 45° Grouser plate width 310 mm
Number of cylinders 6 Ground contact length 2 590 mm
Engine output 149 kW / 2 200 rpm Ground pressure 0.81 kg/cm2
Transmission type Gear box Ground clearance 440 mm
Hydraulic pumps 2 variable, displacement Turnable superstructure 120° / 180°
piston, two gear pumps Oscillation angles +/- 10°
Screw compressor type Enduro 25 Tramming force 110 Kn
Air flushing capacity 8.1 m3/min Max. tramming speed 3.5 km/h
Flushing air pressure 4-10 bar
Air cleaner 2 pcs, with ejector and OPERATOR’S CABIN
safety element Cabin type Ergo
Fuel tank 350 l Certificates F.O.P.S. and R.O.P.S.
Average fuel consuption 17-22 l/h Noise level in the cabin below 80 dB(A)
Fuel saving system Standard Controls Drilling, tramming, boom
Weight 1 050 kg and rod changer
Heaters Standard
Pressurization Standard
ARTICULATED BOOM Seat Multiposition
Boom type DB 800H Vibration dampening Standard
Boom length 4.8 m Windows Safety laminated, tinted,
Drilling coverage on flat 17.6 m² (26.4 m²) with wipers
Collaring height +2.5 m/-4.5 m Power take-off 12 VDC
Horizontal holes To the right

3/4
Technical Specification
05271-1 RANGER 700
2005-04-18
Rock Pilot
STANDARD COMPONENTS TRANSPORT DIMENSIONS
1. Rock drill HL 710, hydraulic Weight (without options) 14 800 kg
2. Chain feed CF 145H Width 2.5 m
3. Rod handler RH 714 incl. 1 set of jaws Height 3.6 m / 3.2 m
4. Boom DB 800H, articulated Total length 7.2 m / 10.7 m
5. Carrier Track mounted, turnable
superstructure
THE JAWS FOR DRILL STEELS
6. Powerpack Diesel driven, hydraulic
pumps and on-board com- Drill steel Drill steel Recommended
pressor type diameter hole diameter
7. Hydraulic system Load sensing and open Extension 38 mm 64 - 70 mm
1.
center rods 1 ½" 2 ½" - 2 ¾"
8. Control system THC 700 Rock Pilot 38 mm 64 - 70 mm
2. MF-rod
9. Operator's cabin F.O.P.S. and R.O.P.S. 1 ½" 2 ½" - 2 ¾"
10. Dust collection DC 800 H, hydraulic Extension 45 mm 76 - 89 mm
system 3.
rods 1 ¾" 3" - 3 ½"
11. Working lights 9 pcs 45 mm
4. MF-rod 76 - 89 mm
12. Gauge set For accumulator pressure
1 ¾" 3" - 3 ½"
checking
13. Reversing alarm 5. MF-rod 51 mm 89 - 115 mm
Service and spare 2" 3 ½" - 4 ½"
14. Manuals
parts manuals:
2 x paper copy Note
- not with 10' MF-rods
2 x CD-ROM (Toolman)
- with hose reel only 10' or 12' rods
15. EU-safety devices - 51 mm (2") / 14’ steels only MF-type
- if several jaws selected please specify jaws assembled

SELECTION OF OPTIONS
1. Turnable superstructure 180º 22. Horizontal drilling kit
2. Air conditioning 23. Hose reel (not with 14' rods)
3. Rod greasing system
4. P&Q electric vertical angle indicator (± 6 deg.) 24. Movable drill steel support

5. Electric angle indicator TIM 2302 with aiming 25. Radio with CD player
unit 26. Central lubrication system
6. Measuring system TIM 2303 with aiming unit 27. Kit for alternative steels
7. Laser based measuring system TIM 2305 28. Water injection system with tank
8. Power extractor 29. Water injection system w/o tank
9. Electric filling pump for refuelling 30. Zero Dust system
10. Remote control box; for rear ground support, 31. Biogradeable hydraulic oil, Shell naturelle HFE
driving and oscillation 46 or HFE 68 (synthetic ester)
11. Remote control box + hydraulic winch with cable 32. Extra manuals
tightness automatics (replaces previous option)
12. Hydraulic rear ground support 33. First service kit for Ranger 700²

13. Three-bar grouser plates 34. Special tools for HL 710, field kit
ID 150 734 88
14. Guides for grousers 35. Special tools for HL 710, complete
15. Fuel operated heater for cabin, hydr. oil and en- ID 150 730 78
gine 36. Antifreeze for air lines
16. Flushing control automatics 37. Vacuum cleaner for cabin
17. Shut down of suction for water holes
18. Sanrock Mini H hydraulic bit grinder
19. Readyness for Power extractor www.tamrock.com
SANDVIK TAMROCK reserves the right to change this specification without further notice
20. Towing hook
21. Primary separator PE 50
SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND 4/4
Tel.int. +358 205 44 121, Telefax int. +358 205 44 120

Você também pode gostar