Escolar Documentos
Profissional Documentos
Cultura Documentos
February 2011
04_101026e-00/Page 1 of 4
Personal Care
04_101026e-00 February 2011 Page 2 of 4 Tinogard TT
Characterization Tinogard TT, a sterically hindered phenolic antioxidant, is a highly effective, non
discoloring stabilizer to prevent deterioration of ingredients sensitive to oxidation,
such as perfumes, natural oils, fatty acids and the like. It protects rinse-off products
as well as leave on formulations efficiently against thermo-oxidative degradation
(e.g. rancidification and color changes).
Structural formula
HO (CH2)3 C O CH2 C
PRD-No.* 30483790
CAS-No. 6683-19-8
Applications Tinogard TT can be added to the oil, perfume or organic phase of personal care
formulations. Because of its insolubility in water a sufficient amount of solubilizing
compound is needed in aqueous formulations to avoid precipitation.
The product can be used at maximum end-use concentration levels of 0.3% for
leave-on and 0.5% for rinse-off applications.
Guidelines for use 50 – 500 ppm of Tinogard TT typically provides long-term stability to home and
personal care formulations.
In bar soaps the concentration levels for Tinogard TT generally range between
0.01% and 0.05%. Optimal incorporation levels depend on formulation, processing
conditions and long-term stability requirements. Therefore, optimum levels have
to be determined specifically for the envisaged applications.
Homogeneous incorporation of Tinogard TT is achieved by incorporation via the
oil orperfume phase of the formulation.
The product can be used at maximum end-use concentration levels of 0.3% for
leave-on and 0.5% for rinse-off applications.
Health & Safety In accordance with good industrial practice, handle with care and prevent
contamination of the environment. Avoid dust formation and ignition sources.
For more detailed information please refer to the material safety data sheet.
Australia AICS
Canada DSL
China First Import
Europe ELINCS
Japan MITI
Philippines PICCS
Korea ECL
USA TSCA
Note This document, or any answers or information provided herein by BASF, does
not constitute a legally binding obligation of BASF. While the descriptions, designs,
data and information contained herein are presented in good faith and believed
to be accurate, it is provided for your guidance only. Because many factors may
affect processing or application/use, we recommend that you make tests to
determine the suitability of a product for your particular purpose prior to use. It
does not relieve our customers from the obligation to perform a full inspection of
the products upon delivery or any other obligation. NO WARRANTIES OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS
DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT
INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE
SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE
CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.
February 2011