Escolar Documentos
Profissional Documentos
Cultura Documentos
No.
1000
1001
1100
1101.1
1101.2
1101.3
1101.4
1200
1201.1
1201.2
1201.3
1201.4
1201.5
1201.6
1201.7
1201.8
1201.9
1201.10
1300
1301
1301.1
1301.2
1301.3
1301.4
1301.5
1400
2701
1500
1501
1501.1
1501.2
1501.3
1501.4
1501.5
1501.6
1501.7
.
1501.8
1501.9
1501.10
1501.11
1501.12
1501.13
1501.14
1600
1601
1601.1
1601.2
1601.3
1601.4
1602
1602.1
1602.1
1603
1603.1
1603.2
1700
1701
1702
1703
1704
1705.00
1706.00
1707
1708
1709
1710
1711.00
1712.00
1713
1714.00
1715
1716
1717
1718
1720
Item Description
Supply, fabrication and erection of steel structures required for supports of light fixtures, brackets for miscellaneous
electrical equipment and cables and cable tray supports, made from rolled M.S. sections, square pipes, including welding,
bolting, riveting, supply of necessary anchor fasteners and grouting, including supply and application of one coat of antirust
primer and two finishing coats of approved synthetic enamel paint, and supply of all materials including G.I.hardware and
labour, as per specifications, drawings and directions of Engineer-in-charge.
Supply and erection of G.I. (610 gm. / m2) Perforated type cable tray of following sizes with all the accessories like
bends, tees, reducers, elbow, joints, etc. and fixing hardware including supply of all materials and labour, as per
specifications, drawings and directions of Engineer-in-charge.
'Cable Tray of 300 mm wide - Perforated type - 2 mm thickness - 50mm side callers height
'Cable Tray of 100 mm wide - Perforated type - 2 mm thickness - 25mm side callers height
'Cable Tray of 50 mm wide - Perforated type - 2 mm thickness - 25mm side callers height
LIGHTING FIXTURES
Supply, Installation, connection and testing of following lighting fixtures with lamps sources, suitable drivers / control
gears with the junction box provided for the point / cable wiring, including supply of all hardware required for
installation, labour and materials as per specifications, drawings and directions of Engineer-in-charge.
For all recessed type light fixtures, Suitable Bottom mounting frames, brackets, chains, wire ropes shall be provided
along with the light fixture to match the false ceiling profile and to achieve the total recessed type light fixture fixing
arrangement with the false ceiling. All lights indoor, outdoor, landscape, underwater etc. shall be provided with all
complete accessories including but not limited to back box, connectors, power supply modules etc. for complete
installation.
2 Years of Replacement warranty shall be provided for All LED light fixtures from Manufacturer.
38-40W, Symetric, Indoor LED batten (Integrated LED), suitable to surface mouting with below specification.
mounting, IP65 Protection, color temperature 5500K, CRI > 80.
38-40W, Symetric, outdoor LED batten (Integrated LED), suitable to surface mouting with below specification.
mounting, IP65 Protection, color temperature 5500K, CRI > 80.
38W, 2' X 2" Recessed mounted LED light fixture with below specification
15W, Round LED light fixture, 1500 Lumens, suitable for recessed mounting, IP20 Protection, color temperature
4000K, CRI > 80
10W, Round LED light fixture, 1000 Lumens, suitable for recessed mounting, IP20 Protection, color temperature
4000K, CRI > 80
20W, Round recessed LED light fixture, 2000 Lumens IP20 Protection, color temperature 4000K, CRI > 80
20W, Round Surface recessed LED light fixture, 2000 Lumens, suitable for IP20 Protection temperature 4000K, CRI >80
54W pendent LED light fixtures suitable for conference room above table, linear type with up and down throw, Lumens
output 4000 lumens downwards, temperature 4000K, CRI > 70
Supply, Installation, testing and commissioning of lighting / power distribution boards (MCBDBs), surface / flush
mounting, double door type in dust tight, powder coated enclosure and provided with four pole MCB as incomer, and
DP RCCB per phase (3 nos.) with 30mA sensitivity (or as asked for in individual item) and required nos. of 10
KA rated SP/DP/4P MCBS for individual circuit control as outgoing feeders. The DBs shall be provided with the
complete wiring and all materials as per drawings, specifications and directions of Engineer-in-charge.
Total of 1300 - MCB DISTRIBUTION BOARD (MCBDBS) FOR LIGHTING AND POWER CIRCUITS
Note :-
For all Mains and Point wiring rates, supply and erection of modular switches / Bell Push / Electronics Step type Fan
Regulators with all accessories, PVC "MMS" type conduits, FRLS Copper flexible wires, Pull wires, steel junction boxes
with required nos. of conduit knock outs, laminated sheet to cover the junction box, front plate and grid plate of all Modular
accessories and switchbox, GI flexible conduit for conduit drops and any other application as asked for in the respective
item, including all hardware and accessories shall be in bidder's scope.
All power sockets shall be of multi pin type to connect universal power plugs.
All surface / recessed metallic boxes for the modular accessories shall be made of G.I. material Installation rate shall
include Chiselling, cutting (using electric cutter), re-plastering and finishing in masonry walls, etc. for laying of
conduits and wires. All wiring and conduit work shall be done after plastering.
Point wiring for Secondary Switchbox (Subsequent Switchboxes in the circuit to be fed from the First / Previous Switchbox in
the circuit) with 2-2.5 sq. mm & earth wire of 1.5 sq. mm (green) ISI marked of FRLS PVC insulated multistrand copper wires
in PVC "MMS" conduit. Rates shall be exclusive of Modular type switches / bell push, Metallic box with front plate but inclusive
of PVC conduit, FRLS Copper Flexible wires and all required PVC conduit accessories and fixing hardware.
Point wiring for Light - Primary (Full)/ Bell Push with 2-1.5 sq. mm & earth wire of 1 sq. mm (green) both are of ISI marked of
FRLS PVC insulated multistrand copper wires with medium duty PVC "MMS" conduit with all PVC conduit accessories and
fixing hardware complete with 6A Modular type switch / bell push & accessories and earth continuity, erected on Metallic box
covered with 3 mm thick laminated sheet for open / concealed wiring covered with appropriate front plate modules erected
concealed in Wall / ceiling.
For Surface / Concealed Wiring. (Length up to - 7 Mtrs.)
Point wiring for Light - secondary (half) light point with 2-1.5 sq.mm & earth wire of 1 sq. mm (green) both are of ISI marked
FRLS PVC insulated multistrand copper wires, with PVC "MMS" conduit with all PVC conduit accessories and fixing hardware
complete with earth continuity and necessary connection with primary light with accessories erected on Metal box covered
with 3 mm thick laminated sheet for open / concealed wiring.
For Surface / Concealed Wiring. (Length up to - 5 Mtrs.)
Point wiring for Looped Plug (along with other switches on the same switchbox) with 6A Modular type switch & 5 pin socket
erected on Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling with all accessories.
For Surface / Concealed Wiring.
Point wiring for (P2) secondary 16A Switch and 5 Pin 6/16A Sockets(Subsequent Switch Socket outlet in the circuit to be fed
from the previous outlet) with 2-4 sq. mm & earth wire of 1.5 sq. mm (green) ISI marked of FRLS PVC insulated multistrand
copper wires. Rates shall be inclusive of Modular type 16A switch and 6/16A 5 Pin Modular Sockets, Metallic boxes with front
plates, FRLS Copper Flexible wires
For Wiring. (Average Length - 10 Mtrs)
Point wiring considering copper wires in medium duty PVC "MMS" conduit. Rates shall include PVC conduit and all required
PVC conduit accessories and fixing hardware.
Point wiring without considering Conduits (Wires laid in metal trunking, rates of Metal trunking mentioned somewhere else in
Tender)
Point wiring for (P1) Secondary 6A Switch and 5 Pin Socket (Subsequent Switch Socket outlet in the circuit to be fed from the
previous outlet) with 2-2.5 sq. mm & earth wire of 1.5 sq. mm (green) ISI marked of FRLS PVC insulated multistrand copper
wires. Rates shall be inclusive of Modular type 6A switch and 6A 5 Pin Modular Socket, Metallic box with front plate, FRLS
Copper Flexible wires.
For Wiring. (Average Length - 6 Mtrs.)
Point wiring considering copper wires in medium duty PVC "MMS" conduit. Rates shall include PVC conduit and all required
PVC conduit accessories and fixing hardware.
Point wiring without considering Conduits (Wires laid in metal trunking, rates of Metal trunking mentioned somewhere else in
Tender)
Point wiring for (P6) Secondary 16A Switch and 2 nos. 6A 5 Pin Socket (Subsequent Switch Socket outlet in the circuit to be
fed from the previous outlet) with 2-2.5 sq. mm & earth wire of 1.5 sq. mm (green) ISI marked of FRLS PVC insulated
multistrand copper wires. Rates shall be inclusive of Modular type 16A switch and 2 nos. 6A 5 Pin Modular Sockets, Metallic
box with front plate, FRLS Copper Flexible wires.
For Wiring. (Average Length - 10 Mtrs.)
Point wiring considering copper wires in medium duty PVC "MMS" conduit. Rates shall include PVC conduit and all required
PVC conduit accessories and fixing hardware.
Point wiring without considering Conduits (Wires laid in metal trunking, rates of Metal trunking mentioned somewhere else in
Tender)
Point wiring for Ceiling Fans with 2-2.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked FRLS PVC insulated
multistrand copper wires, with PVC "MMS" conduit with all conduit accessories and conduit fixing hardware complete with 6A
Modular type switch and hum free 5/6 step type electronic fan regulator (two modules size) with all hardware & accessories
with earth continuity erected on Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling.
Point wiring for Exhaust Fans / Wall Fan with 2-1.5 sq. mm & earth wire of 1 sq. mm (green) both are of ISI marked FRLS PVC
insulated multistrand copper wires, with PVC "MMS" conduit with all conduit accessories and conduit fixing hardware
complete with 6A Modular type switch in the common switchbox and 6A 5 pin modular socket near the exhaust fan) with all
hardware & accessories with earth continuity erected on Metallic box covered with appropriate front plate modules erected
concealed in wall / ceiling.
For Surface / Concealed Wiring. (Length up to - 8 Mtrs.)
Providing and erecting MMS type, FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size, erected
with necessary PVC fittings and Junction boxes fixed with adhesive solution and clamps for open execution / erecting on
the surface of wall / ceiling or concealed in wall / slab or laid in the cable tray along with continuous fish wire to draw
wires, laid in approved manner with replastering & refurnishing the surface to match the area wall / ceiling as required.
(A) 25mm
(B) 32mm
Providing & erecting PVC Flexible Conduit with required nos. of coupling, bushes, Check-nuts etc. complete of following sizes.
(A) 25mm
Mains wiring using 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wires in already installed pipe.
The wiring shall also include copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of
following size.
A) 2 Wire 1.5 sq. mm + 1 sq.mm Earth wire
B) 2 Wire 2.5 sq. mm + 1.5 sq.mm Earth wire
C) 2 Wire 4 sq. mm + 2.5 sq.mm Earth wire
Supply and installation of following type of Modular Type Accessories mounted on Metallic box covered with appropriate front
plate modules erected with necessary connection as directed by Engineer in charge.
Supplying and laying UPVC cable raceway system made of unplasticised polyvinyl, chloride rigid material with ignition free &
flame proof confirming BS- 6099-2-2 & BS 4678-4 with necessary end caps Internal & external bend, flat bends, coupler, tee
etc. including of all necessary accessories of following sizes.
Supply and laying under floor pre-galvanised corrosion-proof rectangular sheet steel cable The trunking of 1.6 mm
thick having withstand point load up to 1.33 Ton & free from seepage of concrete of screed water with following size of
dimensions and nos. of compartments (W x D x T) rate shall cover all the accessories and hardware required to
complete the job. Equivalent to MK-Honeywell / OBO / Schneider / Legrand typical Under Floor straight run trunking
System (alternatively bidder can consider UPVC floor trunking system)
Supply and installation of G.I. crossover box for metal / Al. trunking with duct entry 25mm x38mm size having epoxy
powder coated trap lead with corrosion & rust free having load bearing capacity of 3.6 TONS with adjustable levelling
screw of following size. Equivalent to MK -Honeywell / OBO /Schneider / Legrand typical Under Floor Cross Over Box
Supply and installation of Floor mounted metal S.S. junction box (under floor service) made of high quality ABS &
polyamide materials with trap frame & screw less ratchet trap lead with screw less knob reinforced with 2.5mm thick
pregalvanised steel plate The box shall have automatically openable cable outlets and cable grommets. The top frame
shall have the screw less ratchet bar level adjustment to self adjust with any floor finish thickness. Equivalent to
MK-Honeywell / Schneider / Legrand / OBO typical Under Floor Junction Box
Supply, Installation and Testing of Data outlet with 1-port Faceplate, 1 nos. of RJ-45 Jacks (Cat-6) and modular / surface
box for Data/Voice system as per detail technical specifications and as per instruction of engineer in charge.
Supply, Installation and Testing of Data outlet with 2-port Faceplate, 2 nos. of RJ-45 Jacks (Cat-6) and modular / surface
box for Data/Voice system as per detail technical specifications and as per instruction of engineer in charge.
Supply, Installation, Testing and Connection of 4-pair, 22 AWG, LSZH rated, 500MHZ bandwidth CAT-6 cable laid through
conduits/Cable Tray etc. (Rates of conduits/Cable tray shall be quoted separately at elsewhere )
Supply and Installation of wall mounted equipment cabinet of steel Frame,19" Wide mounting rail, 15U height, Min. 600
mm depth, Lockable polycarbonate door, 40 kg static load Capacity, Power distribution Unit, Vented and field cable entry
Top and Bottom Cover and cooling fans on top panel.
Provide with 19" wide rack mountable Power distribution unit with minimum 4 Nos. of 6/16A sockets of 230VAC output
Provide with vertical rack mountable (2000 mm height) Power distribution unit with minimum 10 Nos. of 6/16A sockets
of 230VAC output. Different color code for PDUs provided in same racks
Supply, Installation and Testing of 24-port, Fully Loaded Patch Panel of 19" wide, 1RU mounting height and 24 RJ-45 jacks
(Cat6.
Supply, Installation and Testing of Cat-6 Patch cables (UTP) - 1Mtr. Length with both side male RJ-45 Connectors and
connections as per detail technical specifications and as per instruction of engineer in charge.
Supply, Installation and Testing of Cat-6 Patch cables (UTP) - 2Mtr. Length with both side male RJ-45 Connectors and
connections as per detail technical specifications and as per instruction of engineer in charge.
Supply, Installation and Testing of 'OS2, Armoured, 12 core Single mode Fiber cable within HDPE pipe. Fiber cable
shall be suitable for indoor/outdoor installation.
Supply, Installation and Testing of 'OS2, Armoured, 6 core Single mode Fiber cable within HDPE pipe. Fiber cable
shall be suitable for indoor/outdoor installation.
Supply, Installation and Testing of Fiber Patch Panel (FPP), 19" wide Rack mounted, 1 RU height, can be
accommodate up to 24 Fibers. Provide with LC (OS2) Adapters, Splice Tray, Pigtails, other accessories and
connections.
Supply, Installation and Testing of Fiber Patch Panel (FPP), 19" wide Rack mounted, 1 RU height, can be
accommodate up to 12 Fibers. Provide with LC (OS2) Adapters, Splice Tray, Pigtails, other accessories and
connections.
Supply, Installation and Testing of 2 meter single mode Fiber "OS2" patch cord with suitable for duplex LC connector
both side as per detail technical specifications and as per instruction of engineer in charge
.
Supply, Installation and Testing of 1RU horizontal wire manager with front D-ring of 3"(D) x 1.75"(H) and top cover.
Supplying & erecting Telephone Cable electrolytic grade annealed copper conductor insulated with PE insulation
twisted in to pairs with colour combination bunched together in concentric layers so as to minimizes cross- talk &
wrapped with FRLS PVC tape & sheathed with FRLS PVC suitable for indoor telephone wiring & confirming to C-DOT
S/WS - 113 / IEC 60189-2, UL-1581 SECTION 1080 V W-1 erected in existing pipe of following size of conductors &
nos.of pairs. With necessary connections.
1) 100-Pairs unarmoured
2) 25-Pairs Unarmoured
3) 10-Pairs Unarmoured
Supply, installation, connection, testing and commissioning of wall mounted krone Box having suitable for telephone
cables including all hardware as per specifications, drawing and directions of Engineer-in-charge.
Supply and installation of Category-2, HDMI cable with connectors (suitable for 19 pin sockets) for connection with TV
Screen and Projector unit along with cable end connectors suitable for data transmission upto 15 mtr. Distance
without the loss of data speed and picture resolution. Single piece of 15 mtr. length.
200 KGs.
50 Mtrs.
30 Mtrs.
40 Mtrs.
61 Nos.
10 Nos.
104 Nos.
70 Nos.
38 Nos.
40 Nos.
5 Nos.
UR
UR
2 Nos.
2 Nos.
1 Nos.
1 Nos.
2 Nos.
6 Nos.
22 Nos.
48 Nos.
150 Nos.
178 Nos.
60 Nos.
8 Nos.
6 Nos.
34 Nos.
100 Nos.
5 Nos.
60 Nos.
22 Nos.
5 Nos.
1,613 Mtrs.
UR
250 Mtrs.
10 Mtrs.
3,170 Mtrs.
490 Mtrs.
UR/Nos.
UR/Nos.
40 Nos.
30 Nos.
20 Nos.
2 Nos.
100 Nos.
5 Mtr.
5 Mtr.
10 Mtrs.
75 Mtrs.
125 Mtrs.
40 Mtrs.
9 Nos.
20 Nos.
7 Nos.
8 Nos.
40 No.
85 No.
7700 Mtrs.
1 No.
1 No.
1 No.
2 No.
10 No.
220 No.
220 No.
UR/Mtrs.
UR/Mtrs.
UR/Mtrs.
UR/Mtrs.
UR/Mtrs.
20 No.
20 Mtrs
UR/Mtrs
UR/Mtrs
1 No.
UR/No.
UR/No.
10 Set.