Escolar Documentos
Profissional Documentos
Cultura Documentos
Model N10-RC
A. Einstein 575 Parque Industrial OKS (B1619CQA) Garín – Buenos Aires – República Argentina
11V1-0020 Tel/Fax (54 –3327) 446646/47 – email : info@binning-oil-tools.com.ar
5CT-1059 Web site: www.binning-oil-tools.com.ar
BINNING OIL TOOLS S.A.
Main Features:
A. Einstein 575 Parque Industrial OKS (B1619CQA) Garín – Buenos Aires – República Argentina
11V1-0020 Tel/Fax (54 –3327) 446646/47 – email : info@binning-oil-tools.com.ar
5CT-1059 Web site: www.binning-oil-tools.com.ar
BINNING OIL TOOLS S.A.
Standard Operation:
In IPO type operation (Injection Pressure Operated), both tubing and annular flow,
the injected gas enters the valve through the side ports, and acts upon the effective
bellows area (Ab), at the moment this pressure is higher than the bellows charge
pressure (Pb) the bellows is compressed and allows gas passage through the seat to
the tubing or casing into the fluid column. (Valves are opened by a combination of
injected gas pressure plus fluid pressure acting from below the stem, when both these
forces added, are higher than bellows charge pressure valve will open).
• Intermittent Gas-Lift : Where a large volume of gas is injected in a short time into
the fluid column thus creating a gas slug, that through expansion will push the
accumulated fluid column to the surface (using the gas slug as a piston). The
injection and waiting times are controlled from the surface.
Engineering details:
A. Einstein 575 Parque Industrial OKS (B1619CQA) Garín – Buenos Aires – República Argentina
11V1-0020 Tel/Fax (54 –3327) 446646/47 – email : info@binning-oil-tools.com.ar
5CT-1059 Web site: www.binning-oil-tools.com.ar
BINNING OIL TOOLS S.A.
Materials
Bellows: Monel
Body: AISI316L
O-rings: Viton
Packing: Nitrile with Kevlar
Seat: Tungsten Carbide
Stem Tip: Tungsten Carbide
Quality Assurance:
Binning Oil Tools manufactures, assembles and tests every piece of equipment that leaves it´s
premises focused on quality and customer satisfaction.. All our products are guaranteed to be
free of any manufacturing or assembly defects and to the requirements of our customers,
although any defect or malfunction is found or the product doesn’t meet your expectations
please send us your comments to the following address where every effort will be done to solve
the issue:
ingenieria@binning-oil-tools.com.ar
A. Einstein 575 Parque Industrial OKS (B1619CQA) Garín – Buenos Aires – República Argentina
11V1-0020 Tel/Fax (54 –3327) 446646/47 – email : info@binning-oil-tools.com.ar
5CT-1059 Web site: www.binning-oil-tools.com.ar