Você está na página 1de 35

2010

CZ SERIES STANDARD CHEMICAL PROCESS PUMP

SHANGHAI BANGPU INDUSTRIAL GROUP CO.,LTD.


01
General, About the model, Purpose, Performance

02
Design features, Media transported

03
Structural drawing

CZ (50Hz) 04-05
Performance range of model CZ pump (50Hz)

CZ 06-11
CZ type performance table

12-19
Drawing and table of out-form installation dimensions

20
Inlet and outlet flange dimensions table

( ) 21
Maximum allowed test pressure(20 )

21-30
Table of the pump casing materials suitable for media

( ) 31
Data list of flow pump (filled in by client)

32
Notice at order, Range of supply
CZ Series Standard Chemical Process Pump

GENERAL

CZ Model CZ centrifugal chemical industrial pump is


made up with the introduced advancded foreign know-how and
of the horizontal, single-stage and single suction type of con-
DIN24256/ISO2858 struction and both dimensions and performance conform with
CZ IH DIN24256/ISO2858 series.
The performance range includes the all performance of
IH standard chemical industrial series and the efficiency, gas
IH IH corrosion performance etc. include are over the IH pump, and
is exchangeable with a single IH pump.

ABOUT THE MODEL

CZ 32 - 200

(mm) Nominal O.D of impeller(mm)

(mm) Outlet diameter(mm)

Standard chemical industrial pump

PURPOSE

Transport low or high temperature liquid; neutral or cor-


rosive liquids; clean or solid grains contained liquids. Specially
applied for:
Chemical and petrochemical industries
Oil refinery
Paper and paper pulp industries
Sugar refine industry

PERFORMANCE

DN 25-400mm Aperture DN 25-400mm


Flow Q up to 2400m3/h
Q 2400m3/h
Head H up to 300m
H 300m
Working pressure P 2.5MPa
P 2.5MPa Working temperature t -80 ~+450
t -80 -+450 Flat performance curve, low vapour corrosion value, high
efficiency, which are also kept under a non-full load.

PAGE / 1
CZ Series Standard Chemical Process Pump

DESIGN FEATURES

The pressure acting on the shart seal is balanced with


the balancing hole in the impeller or the auxiliary vane .
( )
The shaft seal can be either the mixed packing seal(cooled or
( not cooled) or the si ngle or dual-face mechanical one of various

) structures(the balancing type). The ball bearing is durable and


the axle diameter is enough to make sure of stable running.
The pump casing ba lancing the radial force. The bearing holder,
including have the pump casing unnecessa ry to be removed
( from the pipeline for repair(the motor as well, if an extended
axle is used). The flange design used PN16 and PN25 two kinds
)
(upon the difference between materials), and ANSI125Lb/inch 2
PN16 PN25 ( ) or 150Lb/inch2.

ANSI125 / 150 /

MEDIA TRANSPORTED

Sulphric acid and nitric acid of various temperatures and


concentrations, salt
Acid and phosphoric acid etc. roganic and inorganic acids
Sodium hydroxide, sodium carbonate etc. alkaline solutions
of various temperatures and concentrations
Various salt solutions
Various liquid petrochemical products, organic compounds
and other corrosive raw materials and products
The corrosion-proof materials available in this factory
now can meet with the requirements of the above various media.
Please provide the detailed information about the media to be
transported at order.

2 / PAGE
CZ Series Standard Chemical Process Pump

STRUCTURAL DRAWING

( )
1 Pump casing 10 Ventfilter plug 19 Locking gasket 28
Mechanical seal

2 Impeller 11 Bearing bracket 20 Support foot 29 Gasket

3 12 Lubricating ring
21 Constant-level-oiler
30 Pump cover
Gasket

4 13 22 31 Impeller seal ring


Shaft sleeve Circlip Bearing cover

5 O 14 23 32
O-ring Ball bearing Dust-proof ring Seal ring of pump casing

6 O 15 24 33
O-ring Bearing cover Shaft sleeve Impeller seal ring

7 16 25 34
Mechanical seal Dust-proof ring Sealing cover Seal ring of pump casing

O
8 Seal cover
17 26 O-ring
35
Shaft Threaded insert

9 18 27 36
Ball bearing Bearing nut Pipe Impeller nut

PAGE / 3
CZ Series Standard Chemical Process Pump

PERFORMANCE RANGE OF MODEL CZ PUMP(50Hz)

4 / PAGE
CZ Series Standard Chemical Process Pump

PERFORMANCE RANGE OF MODEL CZ PUMP(50Hz)

PAGE / 5
CZ Series Standard Chemical Process Pump

CZ TYPE PERFORMANCE TABLE

Rated rotary speed of pump n=2900r/min Rated rotary speed of pump n=1450r/min
=1.00 =1.35 =1.84 =1.00 =1.35 =1.84
Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84 Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84
Pump type Impeller Q H Power and model of motor Q H Power and model of motor
type (m3/h) (m) (m3/h) (m)
KW Type KW Type KW Type KW Type KW Type KW Type

A 20 33 4 Y112M-2 5.5 Y132S1-2 7.5 Y132S2-2 11 9 1.1 Y90S-4 1.1 Y90S-4 1.5 Y90L-4

B 19 29 4 Y112M-2 5.5 Y132S1-2 7.5 Y132S2-2 10 8 1.1 Y90S-4 1.1 Y90S-4 1.5 Y90L-4
CZ32-160
C 17 22 3 Y100L-2 4 Y112M-2 5.5 Y132S1-2 9 6 1.1 Y90S-4 1.1 Y90S-4 1.1 Y90S-4

D 15 16 2.2 Y90L-2 3 Y100L-2 4 Y112M-2 8 4 1.1 Y90S-4 1.1 Y90S-4 1.1 Y90S-4

A 20 53 7.5 Y132S2-2 11 Y160M1-2 15 Y160M2-2 10 13 1.5 Y90L-4 1.5 Y90L-4 2.2 Y100L-4

B 18.5 47 7.5 Y132S2-2 11 Y160M1-2 11 Y160M1-2 9 11.5 1.5 Y90L-4 1.5 Y90L-4 2.2 Y100L-4
CZ32-200
C 17 39 5.5 Y132S1-2 7.5 Y132S2-2 11 Y160M1-2 8.5 10 1.5 Y90L-4 1.5 Y90L-4 1.5 Y90L-4

D 15 30 4 Y112M-2 5.5 Y132S1-2 7.5 Y132S2-2 8 7.5 1.5 Y90L-4 1.5 Y90L-4 1.5 Y90L-4

A 20 78 15 Y160M2-2 18.5 Y160L-2 30 Y200L1-2 11 19.5 2.2 Y100L1-4 3 Y100L2-4 4 Y112M-4

B 19 72 15 Y160M2-2 18.5 Y160L-2 30 Y200L1-2 10 18 2.2 Y100L1-4 3 Y100L2-4 4 Y112M-4


CZ32-250
C 17 60 11 Y160M1-2 15 Y160M2-2 18.5 Y160L-2 9 15 2.2 Y100L1-4 2.2 Y100L1-4 3 Y100L2-4

D 15 47 7.5 Y132S2-2 11 Y160M1-2 15 Y160M2-2 8 12 2.2 Y100L1-4 2.2 Y100L1-4 2.2 Y100L1-4

A 28 33 5.5 Y132S 1 -2 7.5 Y132S 2 -2 11 Y160M 1 -2 14 8 1.1 Y90S-4 1.1 Y90S-4 1.5 Y90L-4

B 25.6 29 5.5 Y132S 1 -2 7.5 Y132S 2 -2 11 Y160M 1 -2 13 7 1.1 Y90S-4 1.1 Y90S-4 1.5 Y90L-4
CZ40-160
C 22 22 4 Y112M-2 5.5 Y132S 1 -2 5.5 Y132S 1 -2 11 5.5 1.1 Y90S-4 1.1 Y90S-4 1.1 Y90S-4

D 20 16 2.2 Y90L-2 3 Y100L-2 4 Y112M-2 9.5 4.5 1.1 Y90S-4 1.1 Y90S-4 1.1 Y90S-4

A 29 53 11 Y160M 1 -2 15 Y160M 2 -2 18.5 Y160L-2 14.5 13 1.5 Y90L-4 2.2 Y100L1-4 5.5 Y132S-4

B 26 47 7.5 Y132S 2 -2 11 Y160M 1 -2 15 Y160M 2 -2 13 11.5 1.1 Y90S-4 1.5 Y100L2-4 4 Y112M-4
CZ40-200
C 22 39 5.5 Y132S 1 -2 7.5 Y132S 2- 2 11 Y160M 1 -2 11.5 9 1.1 Y90S-4 1.1 Y90S-4 1.5 Y90L-4

D 18 30 4 Y112M-2 5.5 Y132S 1 -2 7.5 Y132S 2 -2 9.5 7 1.1 Y90S-4 1.1 Y90S-4 1.1 Y90S-4

A 32 78 18.5 Y160L-2 22 Y180M-2 30 Y200L 1 -2 16 19.5 3 Y100L2-4 4 Y112M-4 5.5 Y132S-4

B 30 72 15 Y160M 2 -2 18.5 Y160L-2 30 Y200L 1 -2 15 18 2.2 Y100L1-4 3 Y100L2-4 4 Y112M-4


CZ40-250
C 24 60 11 Y160M 1 -2 15 Y160M 2 -2 18.5 Y160L-2 12.5 14 1.5 Y90L-4 2.2 Y100L1-4 3 Y100L2-4

D 21 47 7.5 Y132S 2 -2 11 Y160M 1 -2 15 Y160M 2 -2 10.5 11 1.1 Y90S-4 1.5 Y90L-4 2.2 Y100L1-4

A 42 115 37 Y200L 2 -2 45 Y225M-2 75 Y280S-2 21 29 5.5 Y132S-4 7.5 Y132M-4 11 Y160M-4

B 40 107 30 Y200L 1 -2 45 Y225M-2 55 Y250M-2 20 26.5 5.5 Y132S-4 7.5 Y132M-4 11 Y160M-4
CZ40-315
C 34 81 22 Y180M-2 30 Y200L 1 -2 45 Y225M-2 17.5 20 4 Y112M-4 5.5 Y132S-4 7.5 Y132M-4

D 29 61 15 Y160M 2 -2 22 Y180M-2 30 Y200L 1 -2 15 15 3 Y100L2-4 3 Y100L2-4 5.5 Y132S-4

A 50 34 11 Y160M 1 -2 15 Y160M 2 -2 15 Y160M 2 -2 25 8.4 1.5 Y90L-4 2.2 Y100L1-4 2.2 Y100L1-4

B 45 29 7.5 Y132S 2 -2 11 Y160M 1 -2 15 Y160M 2 -2 22.5 7 1.5 Y90L-4 1.5 Y90L-4 2.2 Y100L1-4
CZ50-160
C 38 22 5.5 Y132S 1 -2 7.5 Y132S 2 -2 11 Y160M 1 -2 19 5.5 1.1 Y90S-4 1.1 Y90S-4 1.5 Y90L-4

D 31 17 3 Y100L-2 4 Y112M-2 5.5 Y132S 1 -2 16.5 4 1.1 Y90S-4 1.1 Y90S-4 1.1 Y90S-4

A 62 52 18.5 Y160L-2 22 Y180M-2 30 Y200L 1 -2 31 13 3 Y100L2-4 3 Y100L2-4 4 Y112M-4

B 56 46 15 Y160M 2 -2 18.5 Y160K-2 22 Y180M-2 28.5 11.5 2.2 Y100L1-4 3 Y100L2-4 4 Y112M-4
CZ50-200
C 49 37 11 Y160M 1 -2 15 Y160M 2 -2 18.5 Y160L-2 25 9 1.5 Y90L-4 2.2 Y100L1-4 3 Y100L2-4

D 43 28 7.5 Y132S 2 -2 11 Y160M 1 -2 15 Y160M 2 -2 22 7 1.1 Y90S-4 1.5 Y90L-4 2.2 Y100L1-4

6 / PAGE
CZ Series Standard Chemical Process Pump

CZ TYPE PERFORMANCE TABLE

Rated rotary speed of pump n=2900r/min Rated rotary speed of pump n=1450r/min
=1.00 =1.35 =1.84 =1.00 =1.35 =1.84
Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84 Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84
Pump type Impeller Q H Power and model of motor Q H Power and model of motor
type (m3/h) (m) (m3/h) (m)
KW Type KW Type KW Type KW Type KW Type KW Type
A 70 82 30 Y200L1-2 37 Y200L2-2 55 Y250M-2 35 20 4 Y112M-4 5.5 Y132S-4 7.5 Y132M-4
B 66 75 30 Y200L1-2 37 Y200L2-2 45 Y225M-2 33 18.5 4 Y112L-4 5.5 Y132S-4 7.5 Y132M-4
CZ50-250
C 60 60 22 Y180M-2 30 Y200L1-2 37 Y200L2-2 30 15 3 Y100L2-4 4 Y112M-4 5.5 Y132S-4
D 50 45 15 Y160M2-2 18.5 Y160L-2 22 Y180M-2 26 11 2.2 Y100L1-4 3 Y100L2-4 3 Y100L2-4
A 87 115 55 Y250M-2 75 Y280S-2 110 Y315S-2 44 28 11 Y160M-4 11 Y160M-4 15 Y160L-4
B 80 100 45 Y225M-2 75 Y280S-2 90 Y280M-2 40 24 7.5 Y132M-4 11 Y160M-4 15 Y160L-4
CZ50-315
C 70 78 30 Y200L1-2 45 Y225M-2 55 Y250M-2 35 19 5.5 Y132S-4 7.5 Y132M-4 11 Y160M-4
D 57 57 22 Y180M-2 30 Y200L1-2 37 Y200L2-2 30 14 3 Y100L2-4 4 Y112M-4 5.5 Y132S-4
A 82 194 110 Y315S-2 160 Y315M2-2 41 48 15 Y160L-4 22 Y180L-4 30 Y200L-4
B 78 175 90 Y280M-2 132 Y315M2-2 160 Y315M2-2 39 43 15 Y160L-4 18.5 Y180M-4 22 Y180L-4
CZ50-400
C 70 140 75 Y280S-2 90 Y280M-2 132 Y315M1-2 35 34 11 Y160M-4 15 Y160L-4 18.5 Y180M-4
D 60 102 45 Y225M-2 75 Y280S-2 90 Y280M-2 30 25 7.5 Y132M-4 11 Y160M-4 15 Y160L-4
A 90 32 15 Y160M2-2 18.5 Y160L-2 22 Y180M-2 45 8 2.2 Y100L1-4 3 Y100L2-4 4 Y112M-4
B 82 28 15 Y160M2-2 18.5 Y160L-2 22 Y180M-2 41 7 2.2 Y100L1-4 3 Y100L2-4 4 Y112M-4
CZ65-160
C 75 24 11 Y160M5-2 15 Y160M2-2 18.5 Y160L-2 38 6 2.2 Y100L1-4 2.2 Y100L1-4 3 Y100L2-4
D 60 14 5.5 Y132S1-2 7.5 Y132S2-2 11 Y160M1-2 30 4 2.2 Y100L1-4 2.2 Y100L1-4 3 Y100L2-4
A 100 54 22 Y180M-2 30 Y200L1-2 37 Y200L2-2 50 13 4 Y112M-4 4 Y112M-4 5.5 Y132S-4
B 94 48 22 Y180M-2 30 Y200L1-2 37 Y200L2-2 47 12 3 Y100L2-4 4 Y112M-4 5.5 Y132S-4
CZ65-200
C 83 38 18.5 Y160L-2 22 Y180M-2 30 Y200L1-2 42 9.5 3 Y100L2-4 3 Y100L2-4 4 Y112M-4
D 70 30 11 Y160M1-2 15 Y160M2-2 18.5 Y160L-2 37 7 2.2 Y100L1-4 2.2 Y100L1-4 3 Y100L2-4
A 115 82 45 Y225M-2 55 Y250M-2 75 Y280S-2 58 21 7.5 Y132M-4 11 Y160M-4 11 Y160M-4
B 108 75 45 Y225M-2 55 Y250M-2 75 Y280S-2 54 19 7.5 Y132M-4 11 Y160M-4 11 Y160M-4
CZ65-250
C 95 59 37 Y200L2-2 45 Y225M-2 55 Y250M-2 48 15 4 Y112M-4 5.5 Y132S-4 11 Y160M-4
D 83 45 30 Y200L1-2 30 Y200L1-2 37 Y200L2-2 42 11 4 Y112M-4 4 Y112M-4 7.5 Y132M-4
A 135 127 90 Y280M-2 110 Y315S-2 160 Y315L1-2 68 32 15 Y160L-4 18.5 Y180M-4 22 Y180L-4
B 128 121 90 Y280M-2 110 Y315S-2 160 Y315L1-2 64 30 11 Y160M-4 15 Y160L-4 22 Y180L-4
CZ65-315
C 114 97 55 Y250M-2 75 Y280S-2 110 Y315S-2 57 24 11 Y160M-4 11 Y160M-4 15 Y160L-4
D 92 74 45 Y225M-2 55 Y250M-2 75 Y280S-2 49 18 5.5 Y132S-4 7.5 Y132M-4 11 Y160M-4
A 94 32 15 Y160M2-2 18.5 Y160L-2 30 Y200L1-2 47 8 2.2 Y100L1-4 3 Y100L2-4 4 Y112M-4
B 85 28 11 Y160M1-2 15 Y160M2-2 18.5 Y160L-2 42 7 2.2 Y100L1-4 2.2 Y100L1-4 3 Y100L2-4
CZ80-160
C 76 23 11 Y160M1-2 11 Y160M1-2 15 Y160M2-2 38 5.5 1.5 Y90L-4 2.2 Y100L1-4 2.2 Y100L1-4
D 66 17 5.5 Y132S1-2 7.5 Y132S2-2 11 Y160M1-2 34 4 1.1 Y90S-4 1.1 Y90S-4 1.5 Y90L-4
A 103 54 30 Y200L1-2 37 Y200L2-2 55 Y250M-2 51 13.5 4 Y112M-4 5.5 Y132S-4 7.5 Y132M-4
B 95 48 22 Y180M-2 30 Y200L1-2 37 Y200L2-2 47 12 3 Y100L2-4 4 Y112M-4 5.5 Y132S-4
CZ80-200
C 84 38 15 Y160M2-2 22 Y180M-2 30 Y200L1-2 41 9.5 2.2 Y100L1-4 3 Y100L2-4 4 Y112M-4
D 70 30 11 Y160M1-2 15 Y160M2-2 22 Y180M-2 36 7.5 1.5 Y90L-4 2.2 Y100L1-4 3 Y100L2-4
A 127 82 45 Y225M-2 75 Y280S-2 90 Y280M-2 64 20 7.5 Y132M-4 11 Y160M-4 15 Y160L-4
B 120 76 45 Y225M-2 55 Y250M-2 75 Y280S-2 60 19 7.5 Y132M-4 7.5 Y132M-4 11 Y160M-4
CZ80-250
C 105 59 30 Y200L1-2 45 Y225M-2 55 Y250M-2 52 14.5 4 Y112M-4 5.5 Y132S-4 7.5 Y132M-4
D 87 45 22 Y180M-2 30 Y200L1-2 37 Y200L2-2 46 11 3 Y100L2-4 4 Y112M-4 6.5 Y132S-4

PAGE / 7
CZ Series Standard Chemical Process Pump

CZ TYPE PERFORMANCE TABLE

Rated rotary speed of pump n=2900r/min Rated rotary speed of pump n=1450r/min
=1.00 =1.35 =1.84 =1.00 =1.35 =1.84
Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84 Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84
Pump type Impeller Q H Power and model of motor Q H Power and model of motor
type (m3/h) (m) (m3/h) (m)
KW Type KW Type KW Type KW Type KW Type KW Type
A 141 127 90 Y280M-2 133 Y315M-2 160 Y315L1-2 70 33 15 Y160L-4 18.5 Y180M-4 22 Y180L-4
B 135 121 75 Y280S-2 110 Y315S-2 132 Y315M-2 66 30 11 Y160M-4 15 Y160L-4 22 Y180L-4
CZ80-315
C 115 97 55 Y250M-2 75 Y280S-2 110 Y315S-2 56 24 11 Y160M-4 11 Y160M-4 15 Y160L-4
D 90 74 37 Y200L2-2 45 Y225M-2 75 Y280S-2 45 18 5.5 Y132S-4 7.5 Y132M-4 11 Y160M-4
A 171 187 160 Y315M2-2 85 46 22 Y180L-4 30 Y200L-4 45 Y225M-4
B 159 170 160 Y315M2-2 160 Y315L1-2 80 42 18.5 Y180M-4 30 Y200L-4 37 Y225S-4
CZ80-400
C 135 130 90 Y280M-2 132 Y315M1-2 160 Y315L1-2 65 33 15 Y160L-4 18.5 Y180M-4 30 Y200L-4
D 116 95 75 Y280S-2 90 Y280M-2 132 Y315M1-2 53.8 25 11 Y160M-4 15 Y160L-4 18.5 Y180M-4
A 162 29 22 Y180M-2 30 Y200L1-2 37 Y200L2-2 81 7.2 3 Y100L2-4 4 Y112M-4 5.5 Y132S-4
B 150 24 15 Y160M2-2 22 Y180M-2 30 Y200L1-2 73 6 2.2 Y100L1-4 3 Y100L2-4 4 Y112M-4
CZ100-160
C 130 17 11 Y160M1-2 15 Y160M1-2 18.5 Y160L-2 63 4.3 1.5 Y90L-4 2.2 Y100L1-4 3 Y100L2-4
D 110 12 7.5 Y132S-2 11 Y160M1-2 15 Y160M2-2 55 3 1.1 Y90S-4 1.5 Y90L-4 2.2 Y100L1-4
A 193 50 45 Y225M-2 55 Y250M-2 75 Y280S-2 95 12.5 5.5 Y132S-4 7.5 Y132M-4 11 Y160M-4
B 180 44 37 Y200L2-2 45 Y225M-2 75 Y280S-2 90 10.5 5.5 Y132S-4 7.5 Y132M-4 11 Y160M-4
CZ100-200
C 155 35 30 Y200L1-2 37 Y200L2-2 45 Y225M-2 80 8.5 4 Y112M-4 5.5 Y132S-4 7.5 Y132M-4
D 135 26 18.5 Y160L-2 30 Y200L1-2 37 Y200L2-2 70 6 3 Y100L2-4 3 Y100L2-4 7.5 Y112M-4
A 230 79 75 Y280S-2 90 Y280M-2 132 Y315M-2 115 20 11 Y160M-4 15 Y160L-4 18.5 Y180M-4
B 218 73 75 Y280S-2 90 Y280M-2 132 Y315M-2 110 18 11 Y160M-4 11 Y160M-4 15 Y160L-4
CZ100-250
C 190 58 45 Y225M-2 75 Y280S-2 90 Y280M-2 100 14 7.5 Y132M-4 11 Y160M-4 11 Y160M-4
D 170 44 37 Y200L2-2 45 Y225M-2 75 Y280S-2 90 10 5.5 Y132S-4 7.5 Y132M-4 7.5 Y132M-4
A 250 126 132 Y315M1-2 125 31 18.5 Y180M-4 30 Y200L-4 37 Y225S-4
B 240 120 132 Y315M1-2 160 Y315M2-2 119 29 18.5 Y180M-4 22 Y180L-4 30 Y200L-4
CZ100-315
C 203 97 90 Y280M-2 132 Y315M1-2 160 Y315M2-2 104 24 15 Y160L-4 18.5 Y180M-4 22 Y180L-4
D 170 71 75 Y280S-2 75 Y280S-2 110 Y315S-2 86 17.5 11 Y160M-4 11 Y160M-4 15 Y160L-4
A 300 194 150 48 37 Y225S-4 45 Y225M-4 75 Y280S-4
B 290 180 145 44 30 Y200L-4 45 Y225M-4 55 Y250M-4
CZ100-400
C 260 145 160 Y315L1-2 130 36 22 Y180L-4 30 Y200L-4 45 Y225M-4
D 224 105 110 Y315S-2 160 Y315M2-2 115 26 15 Y160L-4 22 Y180L-4 30 Y200L-4
A 180 75 75 Y280S-4 90 Y280M-4 110 Y315S-4
B 167 68 55 Y250M-4 75 Y280S-4 110 Y315S-4
CZ100-500
C 142 53 37 Y225S-4 55 Y250M-4 75 Y280S-4
D 120 42 30 Y200L-4 37 Y225S-4 55 Y250M-4
A 190 18.5 18.5 Y180M-4 22 Y180L-4 30 Y200L-4
B 180 16 15 Y160L-4 18.5 Y180M-4 22 Y180L-4
CZ125-250
C 160 11.5 11 Y160M-4 15 Y160L-4 22 Y180L-4
D 156 11 11 Y160M-4 11 Y160M-4 15 Y160L-4
A 200 30 30 Y200L-4 37 Y225S-4 45 Y225M-4
B 178 24 22 Y180L-4 30 Y200L-4 37 Y225S-4
CZ125-315
C 150 17 15 Y160L-4 18.5 Y180M-4 22 Y280L-4
D

8 / PAGE
CZ Series Standard Chemical Process Pump

CZ TYPE PERFORMANCE TABLE

Rated rotary speed of pump n=2900r/min Rated rotary speed of pump n=1450r/min
=1.00 =1.35 =1.84 =1.00 =1.35 =1.84
Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84 Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84
Pump type Impeller Q H Power and model of motor Q H Power and model of motor
type (m3/h) (m) (m3/h) (m)
KW Type KW Type KW Type KW Type KW Type KW Type
A 200 50 55 Y250M-4 75 Y280S-4 90 Y280M-4
B 195 48 45 Y225M-4 75 Y280S-4 75 Y280S-4
CZ125-400
C 174 38 30 Y200L-4 45 Y225M-4 55 Y250M-4
D 160 28 30 Y200L-4 30 Y200L-4 37 Y225S-4
A 320 44 55 Y250M-2 75 Y280S-2 110 Y315S-2 160 11 7.5 Y132M-4 11 Y160M-4 15 Y160L-4
B 300 39 45 Y225M-2 75 Y280S-2 90 Y280M-2 152 9.5 7.5 Y132M-4 11 Y160M-4 15 Y160L-4
CZ150-200
C 265 30 37 Y200L2-2 45 Y225M-2 75 Y280S-2 140 7 5.5 Y132S-4 7.5 Y132M-4 11 Y160M-4
D 220 23 22 Y180M-2 30 Y200L1-2 45 Y225M-2 123 5 3 Y100L2-4 4 Y112M-4 5.5 Y132S-4
A 390 74 110 Y315S-2 160 Y315L1-2 195 18.5 15 Y160L-4 22 Y180L-4 30 Y200L-4
B 355 62 90 Y280M-2 110 Y315S-2 160 Y315L1-2 180 16 15 Y160L-4 18.5 Y180M-4 32 Y180L-4
CZ150-250
C 325 46 75 Y280S-2 90 Y280M-2 110 Y315S-2 160 11.5 11 Y160M-4 11 Y160M-4 15 Y160L-4
D
A 442 125 220 32.5 30 Y200L-4 45 Y225M-4 55 Y250M-4
B 430 120 210 30 30 Y200L-4 37 Y225S-4 55 Y250M-4
CZ150-315
C 372 94 160 Y315L1-2 180 24 22 Y180L-4 30 Y200L-4 37 Y225S-4
D 310 68 90 Y280M-2 132 Y315M-2 160 Y315L1-2 150 17 15 Y160L-4 18.5 Y180M-4 22 Y180L-4
A 520 205 260 51 55 Y250M-4 75 Y280S-4 110 Y315S-4
B 498 190 250 48 55 Y250M-4 75 Y280S-4 90 Y280M-4
CZ150-400
C 453 151 225 38 37 Y225S-4 55 Y250M-4 75 Y280S-4
D 400 113 200 28 30 Y200L-4 37 Y225S-4 55 Y225M-4
A 300 77 110 Y315S-4 132 Y315M-4 160 Y315L1-4
B 283 72 90 Y280M-4 132 Y315M-4 110 Y315S-4
CZ150-500
C 233 59 75 Y280S-4 90 Y280M-4 110 Y315S-4
D 208 45 45 Y225M-4 75 Y280S-4 75 Y280S-4
A 334 104 160 Y315L1-4
B 315 97 132 Y315M-4
CZ150-560
C 260 80 90 Y280M-4 132 Y315M-4 160 Y315L1-4
D 212 60 75 Y280S-4 90 Y280M-4 110 Y315S-4
A 360 115 160 Y315L1-4
B 338 105.5 160 Y315L1-4
CZ150-630
C 274 82 132 Y315M-4 160 Y315L1-4
D 220 60 75 Y280S-4 110 Y315S-4 160 Y315M2-4
A 610 72 160 Y315L1-2 305 17.5 22 Y180L-4 30 Y200L-4 45 Y225M-4
B 580 65 160 Y315L1-2 290 16 18.5 Y180M-4 30 Y200L-4 37 Y225S-4
CZ200-250
C 520 47 110 Y315S-2 132 Y315M-2 260 12 15 Y160L-4 18.5 Y180M-4 30 Y200L-4
D 470 32 75 Y280S-2 90 Y280M-2 110 Y315S-2 240 8 11 Y160M-4 15 Y160L-4 15 Y160L-4
A 710 122 350 30 45 Y225M-4 55 Y250M-4 75 Y280S-4
B 680 114 340 29 37 Y225S-4 55 Y250M-4 75 Y280S-4
CZ200-315
C 600 87 300 22 30 Y200L-4 37 Y225S-4 55 Y250M-4
D 480 65 132 Y315M-2 250 15 18.5 Y180M-4 22 Y180L-4 30 Y200L-4

PAGE / 9
CZ Series Standard Chemical Process Pump

CZ TYPE PERFORMANCE TABLE

Rated rotary speed of pump n=2900r/min Rated rotary speed of pump n=1450r/min
=1.00 =1.35 =1.84 =1.00 =1.35 =1.84
Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84 Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84
Pump type Impeller Q H Power and model of motor Q H Power and model of motor
type (m3/h) (m) (m3/h) (m)
KW Type KW Type KW Type KW Type KW Type KW Type
A 852 203 426 50 90 Y280M-4 110 Y315S-4 160 Y315L1-4
B 830 150 410 47 75 Y280S-4 110 Y315S-4 132 Y315M-4
CZ200-400
C 750 145 370 36.5 55 Y250M-4 75 Y280S-4 110 Y315S-4
D 670 106 332 27 45 Y250M-4 55 Y250M-4 75 Y280S-4
A 495 84
B 470 79 160 Y315L1-4
CZ200-500
C 400 63 110 Y315S-4 160 Y315L1-4
D 330 48 75 Y280S-4 90 Y280M-4 132 Y315M-4
A 540 105
B 510 98
CZ200-560
C 430 81 160 Y315L1-4
D 350 62 110 Y315S-4 132 Y315M-4 160 Y315L1-4
A 580 132
B 550 125
CZ200-630
C 468 100
D 372 75 132 Y315M1-4
A 545 27 55 Y250M-4 75 Y280S-4 110 Y315S-4
B 528 25 55 Y250M-4 75 Y280S-4 90 Y280M-4
CZ250-315
C 480 19 37 Y225S-4 55 Y250M-4 75 Y280S-4
D 434 13 30 Y200L-4 37 Y225S-4 45 Y225M-4
A 660 49 132 Y315M-4 160 Y315L1-4
B 630 46 110 Y315S-4 160 Y315L1-4
CZ250-400
C 565 36 75 Y280S-4 110 Y315S-4 160 Y315L1-4
D 500 24 55 Y250M-4 75 Y280S-4 90 Y280S-4
A 800 82
B 770 76
CZ250-500
C 700 58 160 Y315L1-4
D 630 42 110 Y315S-4 160 Y315L1-4
A 860 106
B 830 98
CZ250-560
C 760 78
D 665 57 160 Y315L1-4
A 855 128
B 816 119
CZ250-630
C 720 96
D 625 71 160 Y315L1-4
A 1050 48
B 1010 45 160 Y315L1-4
CZ300-400
C 860 34 132 Y315M-4 160 Y315L1-4
D 780 26 90 Y280S-4 132 Y315M-4 160 Y315L1-4

10 / PAGE
CZ Series Standard Chemical Process Pump

CZ TYPE PERFORMANCE TABLE

Rated rotary speed of pump n=2900r/min Rated rotary speed of pump n=1450r/min
=1.00 =1.35 =1.84 =1.00 =1.35 =1.84
Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84 Specific gravity=1.00 Specific gravity=1.35 Specific gravity=1.84
Pump type Impeller Q H Power and model of motor Q H Power and model of motor
type (m3/h) (m) (m3/h) (m)
KW Type KW Type KW Type KW Type KW Type KW Type
A 1240 78
B 1170 75
CZ300-500
C 1015 57
D 870 42 160 Y315L1-4
A 1340 104
B 1280 97
CZ300-560
C 1140 77
D 950 56
A 1450 132
B 1375 125
CZ300-630
C 1170 100
D 950 75
A 1870 74
B 180 70
CZ400-500
C 1520 52
D 1300 38
A 2040 98
B 1950 91
CZ400-560
C 1760 74
D 1500 54
A 2390 125
B 2280 117
CZ400-630
C 1960 95
D 1610 70

* CZ40-250 A CZ40-250A
* 160kW
Note * The impeller type should also be indicated with thepump model on the ordering contract:i.e. model CZ40-250 should be CZ40-250Ain case of type
A impeller;
* If there is the value of flow and head but without the power value of pumps in thelist, when their power values exceed160kW, it should be made s ure w hen
ordering.

PAGE / 11
9
CZ Series Standard Chemical Process Pump

DRAWING AND TABLE OF OUT-FORM INSTALLATION DIMENSIONS

Model of pump A a L1 L2 L3 L4 L B1 B h H n3-Md3 L Weight


Model of motor Name of shaft (kg)
Y90S-4/1.1 1050 127
Y90L-4/1.5 1075 127
Y90L-2/2.2 660 170 1000 1075 127
CZ32-160 Y100L-2/3 1 130 75 1120 400 440 180 300 4-M12 220 138
Y112M-2/4 1140 151
Y132S1-2/5.5 1215 183
740 190 1120
Y132S2-2/7.5 1215 183
Y90L-4/1.5 1085 131
Y100L1-4/2.2 660 170 1000 1130 142
Y112M-2/4 1150 155
CZ32-200 Y132S1-2/5.5 1 140 75 1225 400 440 200 300 4-M12 220 187
740 190 1120
Y132S2-2/7.5 1225 187
Y160M1-2/11 1350 256
840 205 1250
Y160M2-2/15 1350 256
Y00L1-4/2.2 1130 163
Y100L2-4/3 1 740 190 1120 1130 400 440 163
300 4-M12 220
Y112M-4/4 1150 163
Y132S2-2/7.5 940 1400 1315 176
CZ32-250 140 90 350 390 225
Y160M1-2/11 230 1440 225
840 1300 305
Y160M2-2/15 2 1440 303
400 440 4-M16 220
Y160L-2/18.5 1060 270 1600 1485 365 359
Y200L1-2/30 940 230 1400 1615 490 530 448
Y90S-4/1.1 1050 127
Y90L-4/1.5 1075 127
Y90L-2/2.2 660 170 1000 1075 127
Y100L-2/3 1120 138
CZ40-160 1 130 75 400 440 180 300 4-M12 220
Y112M-2/4 1140 151
Y132S1-2/5.5 1215 183
740 190 1120
Y132S2-2/7.5 1215 183
Y160M1-2/11 840 205 1250 1340 252
Y90S-4/1.1 1060 131
Y90L-4/1.5 1085 131
Y00L1-4/2.2 660 170 1000 1130 142
Y112M-4/4 1150 155
Y112M-2/4 1150 155
CZ40-200 Y132S-4/5.5 1 140 75 1225 400 440 200 300 4-M12 220 176
Y132S1-2/5.5 740 190 1120 1225 176
Y132S2-2/7.5 1225 176
Y160M1-2/11 1350 256
Y160M2-2/15 840 205 1250 1350 256
Y160L-2/18.5 1395 256

12 / PAGE
CZ Series Standard Chemical Process Pump

Model of pump A a L1 L2 L3 L4 L B1 B h H n3-Md3 L Weight


Model of motor Name of shaft (kg)
Y90S-4/1.1 1060 148
660 170 1000
Y90L-4/1.5 1085 148
Y00L1-4/2.2 1130 163
Y100L2-4/3 740 190 1120 1130 4-M12 220 163
Y112M-4/4 1150 300 176
Y132S-4/5.5 840 205 1250 1225 400 440 205
CZ40-250 2 140 90 225
Y132S2-2/7.5 1315 205
Y160M1-2/11 1440 225
Y160M2-2/15 230 1400 1440 303
940
Y160L-2/18.5 1485 4-M16 220 359
365
Y180M-2/22 1510 359
Y200L1-2/30 245 1430 1615 490 530 448
Y100L2-4/3 1240 224
Y112M-4/4 1260 237
Y132S-4/5.5 1335 257
Y132M-4/7.5 1375 266
4-M16 220
Y160M-4/11 1460 332
Y160M2-2/15 1460 490 530 365 332
1060 270 1600
CZ40-315 Y160L-2/18.5 2 160 90 1530 280 332
Y180M-2/22 1530 332
Y200L1-2/30 1635 389
Y200L2-2/37 1635 471
530
Y225M-2/45 1675 6-M16 220 565
Y250M-2/55 1820 550 600 565
450
Y280S-2/75 1200 600 300 1800 1900 670 720 820
Y90S-4/1.1 1060 130
Y90L-4/1.5 1 660 170 1000 1085 130
Y00L1-4/2.2 1130 141
Y100L-2/3 1220 300 4-M12 220 128
740 190 1120
CZ50-160 Y112M-2/4 140 75 1240 400 440 185 134
Y132S1-2/5.5 2 1315 166
740 190 1120
Y132S2-2/7.5 1315 179
Y160M1-2/11 1440 210
940 230 1400 310 4-M16 220
Y160M2-2/15 1440 285
Y90S-4/1.1 1070 4-M12 220 134
Y90L-4/1.5 1095 134
Y00L1-4/2.2 1 660 170 1000 1140 4-M16 220 145
300
Y100L2-4/3 1140 145
Y112M-4/4 1160 158
4-M12 220
CZ50-200 Y132S2-2/7.5 150 75 840 205 1250 1325 400 440 200 212
Y160M1-2/11 1450 287
Y160M2-2/15 1450 315 287
2
Y160L-2/18.5 940 230 1400 1495 4-M16 220 287
Y180M-2/22 1520 287
365
Y200L1-2/30 1625 348
Y00L1-4/2.2 1235 184
Y100L2-4/3 190 1120 1235 184
740
Y112M-4/4 1255 300 4-M12 220 197
Y132S-4/5.5 1330 228
205 1250 400 440
Y132M-4/7.5 840 1370 228
Y160M2-2/15 1455 303
CZ50-250 2 155 90 1500 240 303
Y160L-2/18.5 940 230 1400
Y180M-2/22 1525 362
Y200L1-2/30 1630 365 4-M16 220 452
Y200L2-2/37 1630 452
1060 270 1600 490 530
Y225M-2/45 1670 452
Y250M-2/55 1785 575

PAGE / 13
9
CZ Series Standard Chemical Process Pump

Model of pump A a L1 L2 L3 L4 L B1 B h H n3-Md3 L Weight


Model of motor Name of shaft (kg)
Y100L2-4/3 1255 230
Y112M-4/4 1275 243
Y132S-4/5.5 1350 272
2 940 230 1400
Y132M-4/7.5 1390 365 4-M16 220 272
Y160M-4/11 1475 338
490 530
Y160L-4/15 1520 338
CZ50-315 Y180M-2/22 175 90 1610 280 428
Y200L1-2/30 1610 505
385
Y200L2-2/37 1060 530 270 1600 1715 505
Y225M-2/45 1755 365 600
3
Y250M-2/55 1870 550 600 6-M16 220 723
Y280S-2/75 1940 986
450
Y280M-2/90 1200 600 300 1800 1990 670 720 986
Y315S-2/110 2040 1342
Y132M-4/7.5 1380 321
Y160M-4/11 1460 388
Y160L-4/15 940 230 1400 1510 4-M16 220 388
2
Y180M-4/18.5 1535 388
490 530 430
Y180L-4/22 1575 444
Y200L-4/30 1640 526
CZ50-400 Y225M-4/45 165 105 1060 530 270 1600 1745 335 654
Y250M-2/55 1860 777
Y280S-2/75 1930 1029
6-M16 220
Y280M-2/90 3 1980 1029
Y315S-2/110 1200 600 300 1800 2130 670 720 450 1357
Y315M-2/132 2180 1357
Y315L1-2/160 2180 1357
Y00L1-4/2.2 1235 177
Y100L2-4/3 740 190 1120 1235 177
Y112M-4/4 1235 300 4-M12 220 177
Y132S1-2/5.5 1330 221
840 205 1250
CZ65-160 Y132S2-2/7.5 2 155 90 1330 400 440 220 221
Y160M1-2/11 1455 297
Y160M2-2/15 1455 297
940 230 1400 315 4-M16 220
Y160L-2/18.5 1500 297
Y180M-2/22 1525 325
Y00L1-4/2.2 1150 169
Y100L2-4/3 1150 169
1 740 190 1120
Y112M-4/4 1170 4-M12 220 182
Y132S-4/5.5 1245 210
Y160M1-2/11 1370 280
CZ65-200 160 90 840 1250 400 440 240 300
Y160M2-2/15 205 1370 280
Y160L-2/18.5 1415 300
2
Y180M-2/22 1440 4-M16 220 348
940 1400
Y200L1-2/30 230 1545 424
Y200L2-2/37 1545 424
Y112M-4/4 1265 219
840 205 1250 350 4-M12 220
Y132S-4/5.5 1340 400 440 247
Y160M-4/11 940 230 1400 1465 4-M16 220 324
Y200L1-2/30 1640 468
CZ65-250 2 165 105 260 365
Y200L2-2/37 1640 490 530 468
1060 530 270 1600
Y225M-2/45 1680 6-M16 220 563
Y250M-2/55 1795 550 600 686
450
Y280S-2/75 1200 600 300 1800 1865 670 720 948

14 / PAGE
CZ Series Standard Chemical Process Pump

Model of pump A a L1 L2 L3 L4 L B1 B h H n3-Md3 L Weight


Model of motor Name of shaft (kg)
Y132S-4/5.5 1400 1288
Y132M-4/7.5 1440 288
740 230 1400 4-M16 220
Y160M-4/11 1525 354
Y160L-4/15 1570 490 530 365 354
Y180M-4/18.5 1595 415
Y200L1-2/30 1060 530 270 1600 1700 502
CZ65-315 2 185 105 300
Y225M-2/45 1740 588
Y250M-2/55 1855 710
Y280S-2/75 1200 600 300 1800 1925 670 720 450 6-M16 220 838
Y280M-2/90 1975 889
Y315S-2/110 2075 1250
Y315M-2/132 1600 800 320 2240 2175 730 780 50 1338
Y315L1-2/160 2175 1413
Y90S-4/1.1 1165 166
Y90L-4/1.5 1190 166
Y00L1-4/2.2 740 190 1120 1235 177
Y100L2-4/3 1235 330 4-M12 220 177
Y112M-4/4 1235 190
CZ80-160 Y132S1-2/5.5 2 155 90 1330 400 440 220 221
840 205 1250
Y132S2-2/7.5 1330 221
Y160M1-2/11 1455 297
Y160M2-2/15 1455 297
940 230 1400 315 4-M16 220
Y160L-2/18.5 1500 297
Y200L1-2/30 1625 384
Y90L-4/1.5 660 1150 154
Y00L1-4/2.2 1150 169
Y100L2-4/3 1150 169
190 1120
Y112M-4/4 740 1170 182
4-M14 220
Y132S-4/5.5 1245 300 210
Y132M-4/7.5 1285 210
CZ80-200 Y160M1-2/11 2 160 90 1370 400 440 240 280
840 205 1250
Y160M2-2/15 1370 280
Y180M-2/22 1440 348
Y200L1-2/30 1545 424
940 230 1400 350 4-M16 220
Y200L2-2/37 1545 442
Y225M-2/45 1595 300 504
Y100L2-4/3 1245 205
Y112M-4/4 1265 219
840 205 1250 350 4-M12 220
Y132S-4/5.5 1340 247
Y132M-4/7.5 1380 400 440 247
Y160M-4/11 1465 324
Y160L-4/15 940 230 1400 1510 4-M16 220 324
CZ80-250 Y180M-2/22 2 165 105 1535 260 380
365
Y200L1-2/30 1640 468
Y200L2-2/37 1640 490 530 468
1060 530 270 1600
Y225M-2/45 1680 563
6-M16 220
Y250M-2/55 1795 550 600 686
Y280S-2/75 1865 450 948
1200 600 300 1800 670 720
Y280M-2/90 1915 948
Y132S-4/5.5 1400 288
Y132M-4/7.5 1440 288
940 230 1400 4-M16 220
Y160M-4/11 1525 354
Y160L-4/15 1570 354
CZ80-315 2 185 105 490 530 290 365
Y180M-4/18.5 1595 415
Y180L-4/22 1635 415
1060 530 270 1600 6-M16 220
Y200L2-2/37 1700 492
Y225M-2/45 1740 588

PAGE / 15
9
CZ Series Standard Chemical Process Pump

Model of pump A a L1 L2 L3 L4 L B1 B h H n3-Md3 L Weight


Model of motor Name of shaft (kg)
Y250M-2/55 1855 710
Y280S-2/75 1200 600 300 1800 1925 670 720 450 972
Y280M-2/90 1975 972
CZ80-315 2 185 105 290 6-M16 220
Y315S-2/110 2075 1250
Y315M-2/132 1600 800 320 2240 2175 730 780 570 1338
Y315L1-2/160 2175 1413
Y160M-4/11 1520 398
940 230 1400 4-M16 220
Y160L-4/15 1565 398
Y180M-4/18.5 1590 432
Y180L-4/22 2 1630 490 530 430 459
Y200L-4/30 1060 530 270 1600 1695 6-M16 220 537
CZ80-400 Y225S-4/37 185 105 1740 350 631
Y225M-4/45 1765 631
Y280S-2/75 1985 1049
1200 600 300 1800 670 720 450 6-M16 220
Y280M-2/90 2035 1049
3
Y315M-2/132 2235 1463
1600 800 320 2240 730 780 570 6-M20 220
Y315L1-2/160 2235 1463
Y90S-4/1.1 1185 174
Y90L-4/1.5 1210 174
Y00L1-4/2.2 740 190 1120 1255 185
300
CZ100-160 Y100L2-4/3 2 175 90 1255 400 440 260 4-M12 220 185
Y112M-4/4 1275 198
Y132S-4/5.5 1350 229
840 205 1250
Y132S2-2/7.5 1350 365 229
Y100L2-4/3 1285 204
Y112M-4/4 1305 217
840 205 1250 350 4-M12 220
Y132S-4/5.5 1380 246
Y132M-4/7.5 1420 400 440 246
Y160M-4/11 1505 322
940 230 1400 4-M16 220
Y160L-2/18.5 1550 322
CZ100-200 2 165 90 270
Y180M-2/22 1575 378
365
Y200L1-2/30 1680 467
490 530
Y200L2-2/37 1060 530 270 1600 1680 467
6-M16 220
Y225M-2/45 1720 561
Y250M-2/55 1835 550 600 684
450
Y280S-2/75 1200 600 300 1800 1905 670 720 947
Y132S-4/5.5 1415 296
Y132M-4/7.5 1455 296
940 230 1400 4-M16 220
Y160M-4/11 2 1540 362
Y160L-4/15 1585 362
490 530 365
Y180M-4/18.5 1610 423
Y200L2-2/37 1715 500
CZ100-250 200 105 290
1060 530 270 1600 1755 595
Y225M-2/45
Y250M-2/55 1775 6-M16 220 670
3
Y280S-2/75 1940 980
1230 600 1800
Y280M-2/90 300 1990 670 720 450 980
Y315M-2/132 1400 700 2000 1313
Y160M-4/11 1535 366
940 230 1400 4-M16 220
Y160L-4/15 1580 366
Y180M-4/18.5 1650 430
490 530 430
Y180L-4/22 2 1645 430
1060 530 270 1600
Y200L-4/30 1710 509
CZ100-315 Y225S-4/37 195 105 1710 320 509
Y280S-2/75 2000 6-M16 220 1001
1200 600 1800 450
Y280M-2/90 2050 1001
Y315S-2/110 300 2000 670 720 1334
3 2250 1334
Y315M-2/132 1400 700 2000 530
Y315L1-2/160 2250 1334

16 / PAGE
CZ Series Standard Chemical Process Pump

Model of pump A a L1 L2 L3 L4 L B1 B h H n3-Md3 L Weight


Model of motor Name of shaft (kg)
Y160L-4/15 1660 493
Y180M-4/18.5 1725 552
Y180L-4/22 1725 552
1060 530 270 1600 550 600
Y200L-4/30 1790 630
3 430 6-M16 220
Y225S-4/37 1835 725
CZ100-400 210 125 380
Y225M-4/45 1860 725
Y250M-4/55 1945 838
1200 600 300 1800 670 720
Y280S-4/75 2015 1077
Y315S-2/110 2265 1542
4 1600 800 320 2240 730 780 570 6-M20 220
Y315L1-2/160 2315 1542
Y200L-4/30 1875 730
Y225S-4/37 1915 826
1200 600 1800
Y225M-4/45 2025 865
CZ100-500 Y250M-4/55 3 220 125 300 2025 670 720 150 530 6-M16 220 917
Y280S-4/75 2095 1163
Y280M-4/90 1400 700 2000 2145 1475
Y315S-4/110 2295 1475
Y160M-4/11 1540 379
940 230 1400 4-M16 220
Y160L-4/15 1585 379
CZ125-250 Y180M-4/18.5 3 200 105 1610 490 530 315 430 443
Y180L-4/22 1060 530 270 1600 1650 6-M16 220 443
Y200L-4/30 1715 521
Y160L-4/15 1655 448
Y180M-4/18.5 1680 480
CZ125-315 Y200L-4/30 3 205 125 1060 530 270 1600 1785 550 600 370 450 6-M16 220 559
Y225S-4/37 1830 600
Y225M-4/45 1855 633
Y200L-4/30 1880 676
Y225S-4/37 1925 772
1200 600 1800
Y225M-4/45 1950 863
CZ125-400 3 230 125 300 670 720 410 530 6-M16 220
Y250M-4/55 2035 917
Y280S-4/75 2105 1109
1400 700 2000
Y280M-4/90 2155 1109
Y100L2-4/3 1320 274
Y112M-4/4 1340 274
Y132S-4/5.5 1415 274
940 230 1400 4-M16 220
Y132M-4/7.5 1455 274
Y160M-4/11 1540 340
490 530 365
Y160L-4/15 1585 340
Y180M-2/22 1610 401
CZ150-200 2 200 105 310
Y200L1-2/30 1715 478
6-M16 220
Y200L2-2/37 1060 530 270 1600 1715 478
Y225M-2/45 1755 573
Y250M-2/55 1870 550 600 6-M20 220 696
Y280S-2/75 1940 450 958
1200 600 300 1800
Y280M-2/90 1990 670 720 6-M16 220 958
Y315S-2/110 1400 700 2000 2140 530 1286
Y160M-4/11 1540 379
940 230 1400 4-M16 220
Y160L-4/15 1585 379
Y180M-4/18.5 2 1610 490 530 430 443
Y180L-4/22 1060 530 270 1600 1650 443
Y200L-4/30 1715 6-M16 220 521
CZ150-250 200 105 315
Y280S-2/75 2005 1017
1200 600 300 1800 450
Y280M-2/90 2055 1017
Y315S-2/110 3 2205 670 720 1350
Y315M-2/132 1400 700 300 2000 2255 530 6-M16 220 1350
Y315L1-2/160 2255 1350

PAGE / 17
9
CZ Series Standard Chemical Process Pump

Model of pump A a L1 L2 L3 L4 L B1 B h H n3-Md3 L Weight


Model of motor Name of shaft (kg)
Y160L-4/15 1655 448
Y180M-4/18.5 1680 507
Y180L-4/22 1720 507
Y200L-4/30 1060 530 270 1600 1785 550 600 585
3 450 6-M16 220
Y225S-4/37 1830 679
CZ150-315 Y225M-4/45 205 125 1855 370 679
Y250M-4/55 1940 793
1200 600 300 1800 670 720
Y280M-2/90 2060 1032
Y315S-2/110 2210 1446
Y315M-2/132 4 2260 1446
1600 800 320 2240 730 780 570 6-M20 220
Y315L1-2/160 2260 1446
Y200L-4/30 1880 676
Y225S-4/37 1925 772
1200 600 1800
Y225M-4/45 2035 863
CZ150-400 Y250M-4/55 3 230 125 300 2035 670 720 410 530 6-M16 220 863
Y280S-4/75 2105 1109
Y280M-4/90 1400 700 2000 2155 1109
Y315S-4/110 2305 1421

CZ150-450

Y225M-4/45 1200 600 1800 1960 861


Y250M-4/55 2115 950
300 670 720 600 6-M16 220
Y280S-4/75 1400 700 2000 2115 1199
CZ150-500 Y280M-4/90 3 240 125 2165 500 1199
Y315S-4/110 2240 1594
Y315M-4/132 1600 800 320 2240 2240 730 780 640 6-M20 220 1594
Y315L1-4/160 2240 1594
Y280S-4/75 2175 1358
1400 700 300 2000 670 720 600 6-M16 220
Y280M-4/90 2225 1358
CZ150-560 Y315S-4/110 4 250 155 2375 500 1752
Y315M-4/132 1600 800 320 2240 2425 730 780 640 6-M20 220 1752
Y315L1-4/160 2425 1752
Y280S-4/75 2235 1524
Y280M-4/90 2285 1524
CZ150-630 Y315S-4/110 4 260 160 1600 800 300 2240 2435 920 970 540 700 6-M16 220 1847
Y315M-4/132 2435 1847
Y315L1-4/160 2435 1847
Y160L-4/15 1755 486
Y180M-4/18.5 1060 530 270 1600 1780 550 600 545
Y180L-4/22 1820 545
450
Y200L-4/30 1855 645
6-M16 220
Y225S-4/37 1200 600 1800 1930 741

CZ200-250 Y225M-4/45 3 235 125 300 1955 670 720 300 741
Y280S-2/75 2110 1092
1400 700 2000 530
Y280M-2/90 2160 1092
Y315S-2/110 2310 1484
Y315M-2/132 1600 800 320 2240 2360 730 780 570 6-M20 220 1484
Y315L1-2/160 2360 1484
Y180M-4/18.5 1790 563
1060 530 270 2600 1830 550 660 563
Y180L-4/22
Y200L-4/30 1895 665
CZ200-315 Y225S-4/37 3 245 125 1940 420 530 6-M16 220 761
1200 600 2800
Y225M-4/45 300 1965 670 720 761
Y250M-4/55 2050 852
Y280S-4/75 1400 700 2000 2120 1098

18 / PAGE
CZ Series Standard Chemical Process Pump

Model of pump A a L1 L2 L3 L4 L B1 B h H n3-Md3 L Weight


Model of motor Name of shaft (kg)
Y225M-4/45 1980 823
1200 600 1800
Y250M-4/55 2065 914
300 670 720 530 6-M16 220
Y280S-4/75 2135 1160
1400 700 2000
CZ200-400 Y280M-4/90 3 260 125 2185 470 1160
Y315S-4/110 2335 1552
Y315M-4/132 1600 800 320 2240 2385 730 780 570 6-M20 400 1552
Y315L1-4/160 2385 1552

CZ200-450

Y280S-4/75 2190 1299


1400 700 300 2000 670 720 600 6-M16 220
Y280M-4/90 2240 1299
CZ200-500 Y315S-4/110 4 265 155 2390 540 1694
Y315M-4/132 1600 800 320 2240 2440 730 780 640 6-M20 400 1694
Y315L1-4/160 2440 1694
Y315S-4/110 2550 1855
CZ200-560 Y315M-4/132 5 270 155 1600 800 320 2240 2600 730 780 570 640 6-M20 400 1855
Y315L1-4/160 2600 1855
Y315M-4/132
CZ200-630 5 280 155

Y200L-4/30 1905 729


Y225S-4/37 1950 825
1200 600 1800
Y225M-4/45 1975 825
CZ250-315 Y250M-4/55 3 255 125 300 2060 670 720 470 530 6-M16 220 916
Y280S-4/75 2130 1162
Y280M-4/90 1400 700 2000 2180 1162
Y315S-4/110 2330 1474
Y250M-4/55 2135 1043
Y280S-4/75 1400 700 300 2000 2205 670 720 530 6-M16 220 1283
Y280M-4/90 2255 1283
CZ250-400 4 280 155 520
Y315S-4/110 2405 1283
Y315M-4/132 1600 800 320 2240 2455 730 780 570 6-M20 400 1675
Y315L1-4/160 2455 1675
Y315S-4/110 2580 1846
CZ250-500 Y315M-4/132 5 300 155 1600 800 320 2240 2630 730 780 610 640 6-M20 400 1846
Y315L1-4/160 2630 1846
Y315L1-4/160
CZ250-560 5 290 155

Y280M-4/90 1400 700 2000 2275 670 720 600 6-M16 220 1368
Y315S-4/110 2475 1763
CZ300-400 4 300 155 320 590
Y315M-4/132 1600 800 2240 2475 730 780 640 6-M20 400 1763
Y315L1-4/160 2475 1763
Y315L1-4/160
CZ300-500 5

CZ300-560

CZ300-630

CZ400-500

CZ400-560

CZ400-630

Y YB 160kW 185kW

Note: here in this table only the installation dimensions equipped with Y, YB series motors less than 160kW are offered, for those equipped with the motors bigger
than 185kW, please provide the motor model and then ask for the related installation dimensions.

PAGE / 19
9
CZ Series Standard Chemical Process Pump

INLET & OUTLET FLANGE DIMENSIONS TABLE

Model of pump Dd Dd1 D1 b1 n 1- d1 Ds Ds2 D2 b2 n 2- d2

CZ32-160
CZ 32-200 32 100 140 18 4- 16 50 125 165 20 4- 18
CZ 32-250
CZ 40-160
CZ 40-200
40 110 150 18 4- 18 80 160 200 24 8- 18
CZ 40-250
CZ 40-315
CZ 50-160
CZ 50-200 80 160 200 24 8- 18
CZ 50-200 50 125 165 20 4- 18
CZ 50-315
100 190 235 24 8- 23
CZ 50-400
CZ 65-160
CZ 65-200
65 145 185 22 8- 18 100 190 235 24 8- 23
CZ 65-250
CZ 65-315
CZ 80-160
CZ 80-200
CZ 80-250 80 160 200 24 8- 18 100 190 235 24 8- 23
CZ 80-315
CZ 80-400
CZ 100-160
100 190 235 24 8- 23
CZ 100-200
CZ 100-250
100 190 235 24 8- 23
CZ 100-315
150 250 300 28 8- 27
CZ 100-400
CZ 100-500
CZ 125-250
CZ 125-315 125 220 270 26 8- 27 150 250 300 28 8- 27
CZ 125-400
CZ 150-200
CZ 150-250
CZ 150-315
CZ 150-400
CZ 150-450 150 250 300 28 8- 27 150 250 300 28 8- 27
CZ 150-500
CZ 150-560
CZ 150-630
CZ 200-250
CZ 200-315
CZ 200-400
CZ 200-500 200 310 360 30 12- 27 200 310 360 30 12- 27
CZ 200-560
CZ 200-630
CZ 250-315
CZ 250-400
CZ 250-500 250 370 425 32 12- 30 250 370 425 32 12- 30
CZ 250-560
CZ 250-630
CZ 300-400 430 485 34 16- 30 430 485 34 16- 30
CZ 300-500
300 450 515 42 16- 33 300 450 515 42 16- 33
CZ 300-560
CZ 300-630 430 485 34 16- 30 430 485 34 16- 30
CZ 400-500
CZ 400-560 400 400
CZ 400-630

20 / PAGE
CZ Series Standard Chemical Process Pump

Pump casing Material

1.4312(B) 1.4308(304) 1.4446(304L)

1.4410(M4) 1.4408(316) 1.6902(316L) 24879(804)

1.4500(904) 1.4536(904L)

E HT200

ZG25

ZG1Cr13

Material Pump casing Flange


GB DN ANSI
MPa
Bolt on the pump casing PN25 PN10 PN16 PN25 Class 125 Class 150

1Cr18Ni9 3.0 - 2543 2544 - B16.5

2Cr13 1.2 2532 2533 2534 B16.1 -


2565-81
2Cr13 3.75 - 2543 2544 - B16.5

2Cr13 3.75 - 2543 2544 - B16.5

Symbol meaning

symbol ( / ) Notice(about corrosion resisting, corrosive rate:mm/year)

A <0.05 Excellet,<0.05

B <0.05 0.5 Good,<0.05 0.5

C 0.5 1.5 Use, but severe corrosive, 0.5 1.5

D >1.5 Unsuitable, severe corrosive,>1.5

* Possibly to produce stress corroded cracking

Color change with solution or medium

Possibly to form corrosion between crystals

Possibly to produce hole corrosion

PAGE / 21
9
CZ Series Standard Chemical Process Pump

TABLE OF THE MEDIA SUITABLE TO BOTH CAST IRON AND LOW CARBON STEEL MADE PUMPS

Temperature ( ) Temperature ( )
Concentration Concentration
Medium name (%) Medium name (%)
25 50 80 100 25 50 80 100

10 B B B B ( H2S) B
( ) Gasoling(containing H2S) 100
Hydrogen peroxide
20~40 D ( HCL,SO2,H2O)
Gasoling(containing HCL,SO2,H2O)
C C
<30 A B B B
Ammonia Coal oil 90 B B B B
40 A
Triethanolamine B B B B
<100 B B B B
Methanol
100 A A A A A A A A

<100 A A A Vegetable oil A D


Ethanol
100 A A A A
D
Propyl alcohol A A A A
Soy bean oil B B
A A A A
Butanol
B(120) Corn oil B B B B

10~30 D Cottonseed oil B B B B


40~50 C
Ormaldehyde Drinking water B B B B
80~90 D D
A
100 A A A A High pure water
A A
10 C C
Acetaldehyde
100 A A A Flowrate

Propionic aldehyde A A <1.5m/s B


Sea water
Butyric aldehyde A A A A
>1.5m/s D D
( ) Dimethyl ether B B B
Water PH=7 C C C C
<100 B

Acetone 100 A A A A Water PH<7 D

100 A(120) Water PH>7 A B


A A A A
Methane <65 D D
A(120)
Sulphuric acid
65~75 C C D D
A A A A
Elayl
75~100 B C D D
A(120)

Ethane A A A A <70 D D

A A A A ( )
Hydrofluoric acid 70~90 C
Propane
(containing no oxygen)
A(120)
100 B B
Tetrane A A A A
( ) <70 B B
Gasoling(high octane value) B B B
Hydrofluoric acid
(containing oxygen) C
B B B 70~90
Gasoling(fuel for oil sprayer)

22 / PAGE
CZ Series Standard Chemical Process Pump

TABLE OF THE MEDIA SUITABLE TO BOTH CAST IRON AND LOW CARBON STEEL MADE PUMPS

Temperature ( ) Temperature ( )
Concentration
Concentration (%) 25 50 80 100
Medium name (%) 25 50 80 100 Medium name 100 A A A A
100 B B C B(120)
>25 D <100 B B B B
Sodium bicarbonate
Chromic acid 30~80 B 100 C

100 A B B B B
Sodium silicate
<10 C C C C B(120)

Boratic acid <10 C(120) 10 D


Sodium citrate 100 A
>10 D D
70~90% +
A 10~20 B B B D
70~90% Sulphuric acid+nitric acid
10~20 D
<30 A B B B* Potassium sulphate
100 A
<30 D*(200)
<90 B B B B
30~40 A B B C
100 A A A A
B B D D Potassiium nitrate
50~60
100 A(120)
Sodium hydroxide 50~60 D*(200)
20 B B B B
80 B D D D
Potassium fluoride C
100 A B B
90 D D
<50 C C C C
100 B D
60~70 C C
100 D*(370)
80~90 B B
Potassium cyanide
<10 C D
100 B B B
10~99 D D
Ammonium hydride 100 C(120) B
100 B
<60 B B B
(PH>7)
Sodium sulphate(PH>7) B B B B
Heavy potassium B 120 B
chromate
<90 A A B C
100 B B B C
Sodium nitrate 100 A A A A
<100 B B B
Potassium
100 B(120) permanganate B A
100
Sodium carbonate A A A A 10 A A A
10 D C C D 10 A(120) D
( )
Solidum chloride 20~30 C D 20~70 B B C A
(containing oxygen) Lime chloride
100 A 100 A A A

10 A A A A 100 A(120)

Sodium cyanide 10 A(120) 90 C


Calcium fluoride
20~90 A A A A 100 B B B B

80~100 100 C D
Note: It is better to use the high Cr-Ni stainless steel for the pump and valve of a high rotating speed. Cast iron is better than carbon steel. May be used below 80~100 .
Cast iron does not withstand 100 .
Cast iron to be C.
Cast iron to be D.

PAGE / 23
9
CZ Series Standard Chemical Process Pump

TABLE OF THE MEDIA SUITABLE TO THE PUMP MADE OF Cr18Ni9 STAINLESS STEEL(304, 304L)

Temperature ( )
Temperature ( )
Concentration 25 50 80 100
Concentration (%)
Medium name Medium name C(200)
(%) 25 50 80 100
70~80 D
Inorganic acid 70~80 D(120)

<5 B D
100 B B
( ) 10~80 D D
Shlphuric acid D(200)
(without gas filled) 90 B D
>50%+
100 B C D <50%+ >20% D( )
Mixed acid: sulphuric B B B D(Boiling
acid>50%+nitric acid point)
<20 C D <50%+water>20%
20~60%+
( ) 30~60 D D <25%+ >20%
Shlphuric acid Sulphuric acid 20~60% D
(gas filled) 70~80 C D +nitric acid <25%+water
>20%
90~100 B C D D 15%+ 5%
+ 80% B( 104)
D Sulphuric acid 15% +
B B B B(Boiled
Fuming sulphuric acid 104)
nitric acid 5%+water 80%
<30 A A A A
<50 A C C D
<30 C(120) D(150)

Nitric acid 40~60 <50 D*(200)

40~60 70* B B B D*

70 70* D*(200)
Chlorhydric acid D Sodium hydroxide
80* B B B D
<5 B B B B
80* D*(200)
B( )
B(Boiling point)
100 B B B B
Phosphoric acid
10 B D D D
D( ) 100 C(316) D(370)
10 D(Boiling point)

10~85 D <50 B B B B
*
( ) ,100 D <50 B( )
Hydrofluoric acid B(Boiling point)
(without gas filled)* 100 B D
*
50 B B B D
( )
Hydrofluoric acid (gas filled)
* D D
* 50 D(200)
<10 B C C Potassium
C( ) hydroxide* 60~70 B B B C
<10 C(Boiling point)
Chromic acid 60~70 C(120)
20~30 B D D D

50 D 80 B D

100 D 80 D(200)
<30 A A A A
100 A
A( )
<30 A(Boiling point) Potassium hydroxide
100 D(250)
40 B B B B
Boratic acid
A A A A
40 B(150) *
Sodium sulphate*
50 B B B B A(200) B(840)

24 / PAGE
CZ Series Standard Chemical Process Pump

TABLE OF THE MEDIA SUITABLE TO THE PUMP MADE OF Cr18Ni9 STAINLESS STEEL(304, 304L)

Temperature ( )
Temperature ( ) Concentration
(%) 25 50 80 100
Concentration
Medium name (%) Medium name 90
25 50 80 100
100 B
<70 A A A A <30 A A A A
A( ) A( )
<70 A(Boiling point) <30 A(Boiling point)
Sodium nitrate Heavy potassium
100 B D chromate 40~60 A A A A
100 D(510) 100 B
10 A A A A <30 B B B B
A( )
10 A(Boiling point) Potassium B( )
B(Boiling point)
Sodium carbonate permanganate
20~40 B B A A
100 B
100 A A A B
<20 A A A D
Sodium carbonate 100 D*(400) D*(900) *

30~80 B B B D
Calcium chloride*
10~30 B B B B
B( )
100 B
10~30 B(Boiling point)
*
100 D(150)
Sodium chloride* 90 D
Calcium fluoride 10 A A A A
100 B B B
100 A A A A
100 D(260) D(700)
10~40 B B B B
10 A A A A
(PH>7) B( )
20~30 A Solozone(PH>7) 10~40 B(Boiling point)
Sodium cyanide ( )
40~100 A A A D (Hydrogen peroxide 90 A A
solution)
40~100 D(700) 100 B C

A A A A Ammonium water A A A A
Sodium silicate
D(800) ( ) A A A A
Ammonium
10 A A A A (free of water) A(316) A(500)
10 A(150) <100 A A A A
Methand
Sodium acetate
20~60 B B B B 100 A A A C
100 B B B B A B B B
Alcohol
100 B(370)
Propyl alcohol A A A A
<40 B B B B
Butanol A A A A
Sodium citrate
100 B
<40 A A A A
< A A A A
<40 A(150)
A( )
< A(Boiling point)
Potassium sulphate 50 A A B B
100 B
50 B(300)
100 D(200) Ormaldehyde
60~70 A A
<80 B B B B
B( ) 80~90 A A A
<80 B(Boiling point)
Saturation 100 A
100 A A A A
100 A(560) Acetaldehyde A A A A

Potassium fluoride B B B B Propionic aldehyde A

<30 A A A A Butyric aldehyde A A A A


Potassium cyanide B B B B
40~ B B B B ( ) Dimethyl ether

PAGE / 25
9
CZ Series Standard Chemical Process Pump

Temperature ( ) Temperature ( )
Concentration Concentration
Medium name (%) Medium name (%)
25 50 80 100 25 50 80 100

Ethyl ether A A A A A A A A
Acetone A A A A Vegetable oil
A(350)
A A A A
Methane
A(370) Soy bean oil A A A A
A A A A
Elayl Corn oil A A A A
A(315)
( )
Propane(liuid and gas) A A A A Cottonseed oil A A A A

Tetrane A A A A
Drinking water A A A A
Gasoling(high octane value) B B B

B B B Sea water
Gasoling(fuel for oil sprayer) Flowrate

A A A A
Coal oil <1.5m/s A A
A(200)
>1.5m/s A
Triethanolamine B B B B

TABLE OF THE MEDIA SUITABLE TO THE PUMP MADE OF Cr18Ni12Mo(Ti)(316,316l) STAINLESS STEEL

Temperature ( ) Temperature ( )
Concentration Concentration
Medium name (%) (%) 25 50 80 100
25 50 80 100
<5 B B D D D(120)
10~30 B C D D 50~85 A B B B
( ) Medium name
40~50 C D D
Shlphuric acid 50~85 D(120)
(gas filled) 60~70 D D D
90 D
90 B C D D
100 B C C C 100 B
100 D(120) ( )
Phosphoric acid(containing no oxygen) B B B
<5 B D D D ( ) <100 D
( ) Hydrofluoric acid
Shlphuric acid 20~80 D D D D (without gas filled) 100 B
(without gas filled)
80~90 B D D <10 B
( )
100 B B B C Hydrofluoric acid 10~90 D
(gas filled)
<20 A A A A 100 B
<20 C(120) D(150) 10 B
30~60 A B B B 30 A
30~60 D(120) Carbethylic acid
100 A A A A
Nitric acid 70 A B B A(816)
100
80 A B D Chromic acid D D
90 A D Chloric acid D
100 A D Tetra-phosphoric acid B
<25 A A A A <10 A A A A
( ) A( ) A( )
Phosphoric acid <25 A(Boiling point) <10 A(Boiling point)
Boratic acid
(gas filled)
25~50 A A A B 20~50 B B B B

26 / PAGE
CZ Series Standard Chemical Process Pump

Temperature ( ) Temperature ( )

Concentration 25 50 80 100 Concentration 25 50 80 100


(%) B( ) (%)
B(150) B(Boiling point) D(250) D(370)
Medium name Medium name
70~80 B D(120) 100 A A A A

100 B B D(250) C(260) D(370)

D <50 A A A A
Nitro-hydrochloric acid
A( )
B B B <50 A(Boiling point)
>50%+
<50%+ >20% D( ) 50 B B B D
Mixed acid: sulphuric D(Boiling point)
acid>50%+nitric acid 50 D(200)
<50%+water>20% D
* 60~70 B B B C
20~60%+ Potassium
<25%+ >20% D hydroxide* 60~70 C(150)
Sulphuric acid 20~60%+
nitric acid <25%+water>20% 80 B

30%+ B B B 80 D(200)
15%+ 55%
Mixed acid: sulphuric B( ) 100 A
acid30%+nitric acid B(Boiling point)
15%+water55% (110) 100 D(260)

B B B A A A A
15%+
Sodium sulphate
5%+ 80% A(200) B(840)
Mixed acid: sulphuric B( )
acid15%+nitric acid B(Boiling point) <70 A A A A
5%+water80% (110)
<70 A( )
A(Boiling point)
<5 B B B B Sodium nitrate
100 B
>5 C C C C
Aminic acid 100 A(510)
D( )
>5 D(Boiling point) 10 A A A A
<50 A A A A 10 A( )
A(Boiling point)

( ) 60~90 B B B B 20~40 B B A A
( ) Sodium A( )
Acetic acid 100 B B B B carbonate 20~40 A(Boiling point)
(without gas filled)
100 B B B B(260)
100 D(200)
100 D*(400) D*(900)
<40 A A A A
10 B D
<40 B(150) D(200)
20~30 B B B B
( ) 50 A B B B * B( )
20~30 B(Boiling point) D(120)
Acetic acid Sodium chloride*
(gas filled) 60~90 A B B C 90 D
100 A B B C 100 A D(700)

100 D(150) Sodium bicarbonate A A A A

<20 A A A A <10 A A A A

B( ) 20~30 A
<20 B(Boiling point) D(150)
Sodium cyanide
40~100 B D
30~50 A A B D
40~100 D(700)
30~50 D*(150)
Sodium hydroxide A A A A
70 A A B B Sodium silicate
D(800~1000)
70 D*(150) <100 A A A A
80 A A B D* Potassium sulphate A( )
<100 A(Boiling point)

PAGE / 27
9
CZ Series Standard Chemical Process Pump

Temperature ( ) Temperature ( )
Concentration
Concentration 25 50 80 100 (%) 25 50 80 100
Medium name (%) Medium name
A A A A A
<80 B B B B Alcohol A A A A
A( )
A(Boiling point) Ethandiol A A A A
Saturation
100 B <40 A A A A
B(550) <40 A(150)
<70 B B B B 50 A A B B
B( )
<70 B(Boiling point) 50 B(300)
Potassium bicarbonate Ormaldehyde
100 B B B B 60~70 A A
Potassium fluoride B B B B A A A
80~90
<90 B B B B
100 A
Potassium cyanide 100 B
Ethyl ether A A A A
<30 A A A A
A( ) Acetone A A A A
<30 A(Boiling point)
Heavy potassium Ethyl ester acetate A A B B
chromate 40~60 A
A A A A
10 B
Toluene A( )
A(Boiling point)
Potassium permanganate <30 B B B B
A A A A
10 B D
Gasoline A(175)
20~30 B B
A A A A
*
40~90 B B B Coal oil
40~90 D( ) A(200)
Calcium chloride* D(Boiling point)

100 A A A A 70~90 B B B B
Phenyl hydroxide B(150) D(200)
50 C(-18) 70~90
10 A A A A Flowrate
Calcium fluoride 100 A A A A Sea water <1.5m/s A *
A(PH 7)
Methand <100 A A A A >1.5m/s A
Cr26Mol Note: Cr26MoL ferritic steel does not withstand corrosion;
High flowrate and friction may increase corrosion;
Not allowed to contain micro chlorhydric acid, sulphuric acis or sodium
Cr26Mol chlorid e. Cr26MoL ferritic steel is of a better corrosion resistance.

TABLE OF THE MEDIA SUITABLE TO THE PUMP OF TITANIUM AND TITANIUM ALLOY

Temperature ( ) Temperature ( )
Concentration Concentration
Medium name (%) Medium name (%)
25 50 80 100 25 50 80 100

1 B B B B 10 A A A A(150)
B( )
1 B(Boiling point) 10 B(200)

( ) <3 B B D 20 A A A
Shlphuric acid
(gas filled) <10 B C D D 20 A(150)

10~30 B C D 20 D(316)
Nitric acid
40~50 C D 30~80 A A A A(150)

( ) 50~100 D D 30~80 D(200)


Shlphuric acid
(without gas filled) <10 B 80~100 A A B

10~100 D 80~100 B(150)

28 / PAGE
CZ Series Standard Chemical Process Pump

Temperature ( ) Temperature ( )
Concentration Concentration
Medium name (%) Medium name (%)
25 50 80 100 25 50 80 100

10 B D <10 A A A
( ) A( )
20 C D <10 A(Boiling point)
Chlorhydric acid
(without gas filled) ( ) 30 D D
>30 D Aminic acid
(without gas filled)
B( ) <50 B B D D
1 B B B B(Boiling
point)
90 D D
<20 B
( ) B B B B
Aminic acid (gas filled)
( )
Chlorhydric acid D(35) A A A A
(gas filled)
30 B D Acetic acid
A(200)
>50 D 10 A A A A
Potassium hydroxide
5 B B B B A( )
( ) A(Boiling point)
Phosphoric acid
D( )
(gas filled) <10 B B B 20~100 B D(Boiling
Potassium hydroxide point)

D( ) 20~100 D(260)
D(Boiling point)
10 A A A A
10~20 B D
Sodium hydroxide A( )
10 A(Boiling point)
30 B C D
( ) 10~30 A A A A
Phosphoric acid 40 C C
(gas filled) A( )
10~30 A(Boiling point)
50~70 C C D Sodium sulphate
A
<
100 D <Saturation
D(900)
( )
Phosphoric acid D A A A A
(without gas filled)
<
Sodium nitrate <Saturation
10 A A A A A(300)
A( ) A A A A
10 A(Boiling point) <
Chromic acid
<Saturation A( )
<90 A A A A Sodium chloride A(Boiling point)
*
A( )
100 *
A (Boiling point)
10 A A A A
*
A( ) Alcohol* A A A A
10 A(Boiling point)
Boratic acid
Ethandiol A A A A
< A A A A
<Saturation
Ethyl ether A A A A
1%+ 3% A
Chlorhydric acid 1%+nitric acid 3% Acetone A A A A
2%+ 1%
Chlorhydric acid 2%+nitric acid 1% A
Ethyl ester acetate A A A A

Nitro-hydrochloric acid
A A B B Toluene A A A A
4%+ 1%
Chlorhydric acid 4%+nitric acid 1% A Phenyl hydroxide A

Cu Ni Note: Containing Cu, Ni etc.ions or other oxidants can lower the corrosion.
CL- 2% Both methanol and alcohol containing micro CL may produce stressc orrosive
craking, which can be avoided by containing more than 2% water.

PAGE / 29
9
CZ Series Standard Chemical Process Pump

ZG00Cr20Ni25Mo4.5Cu1.5(904L) ZG00Cr20Ni25Mo4.5Cu1.5(904L) Table of anti-corrosive performance

Medium condition Medium condition


Corrosion Corrosion
Medium name condition Medium name condition
Concentration(%) Temperature( ) Concentration(%) Temperature( )
5-40 1 1 20-
10-40 20-Bolling A

10 1 1 50 100 A
20 <3 <3 90
60 A
Nitric acid
30 <10 <10
70 100 B
40 10~30 10~30
80 80 B
Shlphuric acid
50 40~50 40~50
1-80 Bolling A
50 50~100 50~100
99.5 200 A
60 <10 <10
Acetic acid 100 20-75 A
60 10~100 10~100

80-98 100 100 A

80-98 100 Bolling A

ZG1Cr13(410) ZG1Cr13(410) Table of anti-corrosive performance

Medium condition Extended Medium condition Extended


time Corrosion time Corrosion
(h) condition (h) condition
Medium name Concentration(%) Temperature( ) Medium name Concentration(%) Temperature( )

5 20 A 1 20 A

7 20 720 A 1 Bolling D
Citric acid
5 Bolling D 25 20 720 C

20 20 A Ammonia Solution or air 20-100 A

20 Bolling A 20 20 A

50 20 A Sodium hydroxide 20 Bolling A


Nitric acid
50 Bolling 24 C 50 100 D

65 20 A Thick liquid 20 A
Oxalic acid
65 Bolling 24 D Thick liquid Bolling D

90 20 A 65 20 1127 A
About 65
Ammonium nitrate 65
90 Bolling D About 65 125 110 C

10-50 20 C
Acetic acid
10 Bolling D

10-50 20 A
Formic acid
10-50 Bolling D

30 / PAGE
CZ Series Standard Chemical Process Pump

DATA LIST OF FLOW PUMP FILLED IN BY CLIENT

Name of device Name of equipment No. of place

Conditions of technological operation

Medium to be transported State of running Continual Intermittent


Medium property

Toxic?
Corrosive

Crystal

Content of solids
mm
Graininess

Medium temperature Lowest Normal Highest

Density Kg/m3 Viscosity

Normal Maximum
Flow

Normal Maximum
Head

Inlet pressure
MPa NPSHr m

Installation environment and site conditions

Installation position Indoor Outdoor Ambient temperature

In an explosive area? Pump insulation (or cooling)

Structure

Impeller Half-split type Closed type Structure of pump casing Foot support Center support

Sealing

Material of seal

Packing seal
Self-rinse External-rinse Non-rinse
Mechanical seal

Single end-face External-mounting type


Sealing
mode Double end-face In series

Seal rinse Self-rinse External-rinse Non-rinse

Power seal Stopped seal

Material requirement

Impeller Pump casing Pump cover

Muff Shaft

The information shown above comes as the basic ones required to be informed and use a separated paper for any other requirements.

PAGE / 31
9
CZ Series Standard Chemical Process Pump

NOTICE AT ORDER

Decide the pump`s norm, material, axle seal type and


motor upon the conditions of use.
For fitting with a special motor, please indicate the
explosion-proof class, power, voltage,frequency etc.
Make a special note at order if selecting packing seal.
Users may select the performance parameters within
the range listed in this catalog and indicate the impeller type
(half-opened or closed).
( )

RANGE OF SUPPLY

The standard allocation of the pump at ex-works includes


pump head, motor, foundation, clutch and clutch cover. Add-
itional charge is necessary at order if other accessories are
required.

32 / PAGE
Because we are constantly striving to improve products, we reserve the right to revise the sample data.

Bangpu,create the future

3518
+86-21-59745000 +86-21-59741187
+86 21-59742345 201709

Address 3518 Waiqingsong Road,Baihe Town,


Qingpu District, Shanghai. Zip 201709
Tel +86 21-59745000 Fax +86 21-59741187
Service hot-line +86 21-59742345
Email market@shbangpu.com

www.shbangpu.com

Você também pode gostar