Escolar Documentos
Profissional Documentos
Cultura Documentos
Prepared by the
Chicago Department of Environment
Rooftop gardens can keep buildings cooler, save energy, Building owners have many great
extend the useful life of the roof, and add beauty and
reasons to install a rooftop
useable space.
garden—adding beauty to their
The City of Chicago is using rooftop gardens, along with property, pursuing a hobby, or
light-colored coatings and rooftop solar panels, to replace
lowering heating and cooling
traditional black tar roofs and improve air quality. Rooftop
gardening, like greening on boulevards and in parking lots, bills. In addition, rooftop
reduces dark, heat-trapping surfaces, which in turn lowers temperatures and gardens can actually help lower
reduces air pollution.
air temperatures and improve air
Any roof can be made more energy efficient with the use of light-colored materials, quality for everyone.
and many roofs are suitable for some kind of gardening. This booklet is offered as a
guide to evaluating your options and designing your own rooftop garden.
Hot Home Chicago Green Home Chicago
W H AT I S T H E U R B A N H E AT I S L A N D E F F E C T ? R E D U C I N G T H E U R B A N H E AT I S L A N D E F F E C T
The Urban Heat Island Effect is the difference you feel when you go from an The key to reducing the Urban Heat Island Effect is to reduce the total area of dark,
asphalt parking lot to a tree-shaded park on a hot summer day. It is also the differ- heat-absorbing surfaces such as rooftops and pavement.
ence in temperature between a city and the rural area that surrounds it. Dark
surfaces absorb and radiate heat, raising temperatures as much as 6 to 10 degrees Dark roofs can be made cooler by coating them with reflective materials, similar to
Fahrenheit. The result is more than uncomfortable. It has consequences for our the way light clothes are more comfortable than dark clothes on a hot day. Many
environment, our checkbooks and our health. light-colored roofing materials cost about the same as dark-colored roofing
materials. Solar panels are another solution. They help shade a roof in addition to
If your rooftop is a dark color, you are paying too much for your air conditioning. But generating clean, renewable energy.
you are not alone. In Chicago, about 60% of all roofs are dark colored. These dark
surfaces absorb heat, and so it takes more energy to cool the building’s interior. Not The use of vegetation on a roof is an excellent option. Plants reflect heat, provide
only must your air conditioner work harder to keep your building cool, but power shade, and help cool the surrounding air through evapotranspiration. A rooftop
plants, one source of air pollution, must work overtime to keep up with the increased garden cuts the energy use within the building, especially for cooling. The insula-
demand for energy. The result is higher prices and degraded air quality. tion a garden provides helps conserve both heating and cooling energy.
A high concentration of dark surfaces can raise air temperature in that area because Rooftop gardens absorb rainfall and reduce urban runoff that otherwise would
the surfaces trap heat. Higher temperatures help create more smog because collect pollutants and empty into sewers. A rooftop garden filters and moderates
pollution—from vehicles, homes and factories —is magnified when chemicals in the temperature of any water that is released to the sewer.
the air react with heat and sunlight. Ground-level ozone is a component of smog
and a danger to human health. It irritates the eyes, aggravates asthma, and causes In addition, plants actually filter the air. Plants improve air quality by using excess
permanent lung damage. carbon dioxide to produce oxygen. On a neighborhood or regional level, tempera-
tures are lowered and air pollution is reduced when the overall area of dark surfaces
S K E T C H O F A N U R B A N H E AT I S L A N D P R O F I L E is reduced and the area of reflective and shaded surfaces is increased.
O
F C
O
late afternoon temperature
92
33
32 The layers of a rooftop garden protect the constructed roof from damage and can
31 extend both the warranty and the useful life of the roof.
30
85
A rooftop garden can add usable leisure space to a property that is attractive not just
to people, but to wildlife such as birds and butterflies.
U N D E R S TA N D I N G T H E O P T I O N S
A ROOFTOP GARDEN
A simple rooftop garden can be created with planting containers or potted plants. DESIGN GUIDE
This kind of garden is the most common for homeowners to construct because they
are relatively low in cost and easy to maintain. A container garden provides the
benefits of reflectivity, shade, and evapotranspiration. Compared to a green roof Going green is not as
system, it is not as effective at insulating or reducing stormwater runoff.
complicated as it seems. The
A more elaborate rooftop garden is one where the garden actually becomes the roof. following section will take you
In that case, specially designed layers separate the garden from the “hard” roof, step-by-step along the path to a
provide drainage, supply nutrients, and even add contours. This type of rooftop
beautiful — and beneficial —
garden is referred to in the industry as a “green roof system.”
rooftop garden.
There are two types of green roof systems — “extensive” and “intensive.” An
extensive green roof weighs less than an intensive green roof. It generally has
shallower growing material and heartier plants that require little maintenance.
Intensive green roofs are the most like gardens on the ground—with deeper
growing material, more intricate or delicate plantings, and more maintenance
needs such as irrigation and pruning.
The type of rooftop garden you design depends partly on your interest in gardening
and maintenance, and on the environmental benefits you may wish to achieve.
Most importantly, you must evaluate the structural capacity of the building in order
to assess your options. The next section walks you through the steps of designing a
rooftop garden suitable for your building.
6
TAKING THE INITIATIVE
TOPPING OFF CITY HALL: A CASE STUDY
Mayor Richard M. Daley’s vision of a green-topped City Hall is now a reality. After extensive The green roof contains 20,000 plants in all, consisting of more than 100 varieties, including shrubs,
planning, construction on the 20,000 square-foot garden began in April 2000. The Mayor planted vines, and two trees. Thousands will be able to enjoy the green roof from the many taller buildings that
the first plant at a dedication ceremony on September 20, 2000. This garden is funded through a surround City Hall, even though the rooftop will not be open to the general public.
settlement agreement between the City and ComEd.
Scientists will monitor City Hall’s rooftop garden for its air quality benefits. This includes energy use within
The project is the first of its kind in the City of Chicago and will be a showcase of the possibilities that can the building and temperature readings on top of the roof. For comparison, the adjacent Cook County
grow out of plans for a green roof. The design includes both extensive and intensive systems, as well as building, which is the same height and area as City Hall but which has a black tar roof, will be monitored.
climbing plants.
The City also will monitor temperature, rainfall, wind speed, and wind direction. This data will help
evaluate the garden itself and help the City advise other rooftop gardeners about what works best.
Planning a Rooftop Garden CONDITION OF THE ROOF
The most cost-effective time to construct a rooftop garden is when the roof needs to
Following are the steps for planning a garden on a rooftop: be replaced or newly constructed. This way you can make features, such as a water-
proof membrane, a root-resistant layer, or certain containers, part of the new roof.
1) Consider:
• Condition of the Roof Working with an existing, intact roof is not impossible, but it will mean taking into
• Structural Capacity of the Roof
account the roof’s faults, such as existing leaks, damage, and inability to resist roots
• Access to the Roof
and standing water.
2) Determine:
S T R U C T U R A L CA PAC I T Y O F T H E R O O F
• Weight of Garden
Prior to designing and constructing your rooftop garden, you must first determine
• Cost
if your roof can support the additional weight of soil and plants. A licensed struc-
tural engineer or architect must be hired to conduct a structural analysis. The
3) Design:
purpose is to determine the amount of weight the roof can support at different
• Special Design of a Green Roof System
• Irrigation locations on the roof.
• Drainage
• Selection of Plants and Growing Media The structural capacity largely will dictate the type of rooftop garden that you can
• Maintenance build. Roofs with limited structural capacity may require lighter-weight techniques
such as containers or an extensive green roof system unless structural, and possibly
4) Obtain Permits costly, reinforcement measures are instituted. New buildings can be designed with
adequate structural capacity for any type of garden.
10 11
WEIGHT OF GARDEN DESIGN OF A “ROOF GARDEN”
Weight considerations are at the heart of planning a rooftop garden of any type. You Typically, the cross section of a green roof begins (starting from the bottom) with an
must determine the weight of the garden you wish to plant and make sure it does not insulation layer, a waterproof membrane to protect the building from leaks, and a
exceed the structural capacity of your roof. With the structural capacity determined root barrier to prevent roots from penetrating the waterproof membrane. For the
by the licensed architect or structural engineer, an architect or landscape architect waterproof membrane, look for products that can withstand the effects of acids
can design the garden. released by some plant roots.
To determine the weight, you must take into account: what system(s) you will use to A drainage layer, usually made of lightweight gravel, clay, or plastic is next. The
store water, the growing media and plants you wish to use, the kind of containers you drainage layer keeps the growing media aerated in addition to taking care of excess
may want, equipment for heating, ventilating and air conditioning, and snow loads. water. Since a green roof system covers the entire roof, drainage points must be
Weight capacity might limit the number of people who may access the roof. accessible from above for maintenance purposes. In some designs, and with certain
products, the drainage layer can do double duty, serving to store water for use by the
The following are estimates you may find useful: plants at a later time. On top of the drainage layer, a geotextile or filter mat allows
• Water stored in tanks weighs about 8 lbs/gallon. water to soak through but prevents erosion of fine soil particles.
• Extensive green roof systems weigh about 20-34 lbs/ft 2.
• Intensive green roof systems weigh about 80-150 lbs/ft 2. Finally, the top layers consist of growing media, plants, and a wind blanket. The
• The City of Chicago Municipal Code requires at least growing media is lightweight material that helps with drainage while providing
30 lbs/ft 2 for the design snow load. nutrients to the plants. A wind blanket is used to keep the growing media in place
until the roots of the plants take hold.
COST
In addition to the cost of the structural analysis and design assistance, your A complete green roof consists of many layers.these
layers mimic the conditions found in nature, creating
construction budget should include any needed structural or safety improvements, an environment suitable for plant growth. In this way,
irrigation systems, garden materials, maintenance costs, transportation, and fees rooftops can be converted from dead space into viable
associated with any ongoing professional assistance and permits. green space that will benefit everyone.
Plants
Container gardens can easily be adapted to fit your budget, depending on the type
Growing Media
(wood, fiberglass, ceramic, terra cotta, concrete) and quantity you use. Green roof Filter Mat
systems, as a general rule of thumb, cost about 50% more than a conventional roof. Drainage Layer
An extensive green roof system is generally less costly than an intensive garden. Insulation Layer
Either kind of green roof system can increase the useful life of your roof by about Root Barrier
50% over a conventional roof because the green roof system layers protect the Waterproof Membrane
“hard” roof from exposure to harsh weather. Roof Deck
Source: American Hydrotech, Inc.
12 13
I R R I GAT I O N SELECTION OF PLANTS AND GROWING MEDIA
The City encourages landcaping with native plants as an environmentally benefi- Since natural soils are heavy, particularly when wet, rooftop gardeners typically use
cial garden design. In addition to providing habitat, native plants usually survive lightweight growing media consisting of high-quality compost and recycled
well on rainwater. Still, there may be times during the year when rainfall will be materials. The purposes of these materials are to be water permeable, to retain water
insufficient to supply the water requirements of even drought-tolerant plants. and air, to resist rot, heat, flying sparks, frost and shrinkage, to provide nutrients
appropriate to the chosen plants, and to provide a rooting medium. Plants appro-
You should plan for the need to supplement rainfall with irrigation. Examples of priate for extensive green roofs favor poor soils. Generally, the growing media
irrigation systems include, but are not limited to, rainwater storage tanks, drip irri- should be as deep and have as great a volume as possible within the constraints of
gation systems, moisture sensors to regulate irrigation needs, or hose-bibs for the structural capacity, in order to provide plants with stability in wind and keep the
manual watering. You will need to hire a licensed plumber or irrigation contractor system from becoming too dry.
to design and install an irrigation system or new water connections on your roof.
Rooftops can be hostile environments for plants due to the effects of wind, heat,
DRAINAGE rain, and shadows. Extra insulation may be needed inside and/or outside of
The water drainage system is an essential component of any rooftop garden. planting containers to protect plants from freeze/thaw cycles in winter. A rule of
thumb is that wind speed doubles for every ten stories of building height. Windy
A key environmental benefit of rooftop gardens is that they absorb rainwater and conditions increase the loss of moisture from growing media and leaves, so
reduce runoff to sewer systems. Still, any excess water not absorbed by the growing drought-tolerant plants often survive best. Many plants, especially native varieties,
media, used by the plants, or stored by the water storage system must be effectively are suitable and attractive options for rooftop gardeners.
drained from the rooftop. Failure to do this will create “bathtub” conditions that
may cause root rot and disease as well as add significant weight beyond the roof The Chicago Department of Environment’s web site,
design load. www.cityofchicago.org/Environment, contains a list of
plants to consider and information about their use on Chicago’s City Hall Roof.
Most gardens should be able to use the existing rooftop drainage system with only
minor modifications. Typical drainage systems include gutters, downspouts, drains, MAINTENANCE
and screens or barriers to prevent erosion of the growing media and clogging of the Rooftop gardens must be maintained just like any garden, for instance by watering
drainage system. or weeding. The amount of maintenance will depend on the types of plants used
and the garden design. Larger plants, shrubs, and trees must be pruned to ensure
safety during windy conditions. Drains and gutters must be inspected and cleared
more frequently than without a garden, because of the plant material.
14 15
PERMITS AND ZONING REQUIREMENTS For most applicable permits, you will need to provide four sets of drawings
Before you begin constructing any kind of rooftop garden in the City of Chicago, produced, certified, and stamped by a licensed structural engineer and/or architect.
you will need to have the Chicago Department of Buildings review your plans, and These include:
you will need to obtain the proper permits. • Drawings of existing roof conditions, including dimensions of all structures on the roof.
• Structural framing drawings.
Terminology is important. A “rooftop garden” is presumed to mean it will be acces- • Weight capacity of the existing roof. This includes calculations of snow load, snow
sible to people. Thus there will be requirements such as ensuring proper barriers at drift load if your roof abuts a taller part of the building, and the weight of plant
the edge of the roof, raising exhaust stacks on the roof, providing two exits, or calcu- material both wet and dry.
lating a higher garden weight to account for people. A “green roof” means the garden • Drawings of the proposed garden. This includes all plant, soil and subsoil layers, irri-
will not be accessible to people except for occasional maintenance. gation and drainage, a landscape diagram of where plants will be and their growing
heights, and any changes being made to the roof such as raising exhaust stacks or
To obtain a permit, you will need drawings that document the design. If your home is a adding guardrails.
free-standing single-family house, you may draw the plans yourself. If your building
has more than one dwelling unit, or if the building is commercial or industrial, the There is a fee for a building permit, which includes a review by the Zoning
plans must be prepared by an architect licensed in the state of Illinois. Department. The Building Department may return a correction sheet to you which
details any changes you need to make to your submittal before it can be approved for
a permit. After construction begins, a building inspector also may visit your site to
assure that the construction conforms to the approved plans.
16 17
<
!"#$ ( 8
2:; 8
1 =
% & '! !"" "# ()) /88< $ ( ! $(
* +, "#!!" " * +, $ #(($
-../// 01 %2 %3 -../// & % 3 %3
4 5
"# ) - 1 #(#)(#$ #)"" 82 = 2 $# #!
# "" (# )# 2 & 6 ) #$$ # $ $
* +, (# ## * + , !!## "# $
-../// 3 % / %6% 3 -../// 0: % 3.& ;& -
7 ' <
7 ,(#" !( " !) 78%6 = ( (
8
8& 9 %6; 1 $$
* + , ) !( # *
-../// : ;%3 -../// - % %3
+
4 5 +
8 12 8 6/ 0 ""( % 88
23
8 ((" ) (( #( ! 81 8
- ")"") #"$#( (
* + , (( #( !$#( * + , #"$#( (!$)
-.. % ;0 3 % 3. -../// ;3 1 / % 3
< '
)" #") ! " >2 1 8 = $! $#"
8= 8 1 ((" $ #"!!(" $ 4 1/ ((# " ( !!
* + , #"!!(" ! * +, ((# )
-../// & 8 1% % 3 -../// - 3 2
"
!"
'" ' ( # $%&' '(
&) " )* ) -.&- "
&) + , " !" "/ / 01
' 2 * ' 3"
'( , 4
4 ( % 5 / .1
"
#" ) ! 4 / .16 ( -11
4 /
* .01
* 7819--! (( :
# ) ! ! 261 *
9' -.0#
(
* .01
( 7819--! (( :
&+ ( ;-.09 ( + ( * (
'( 8619-< 8-191-
(
;-.09
# #
# )
& )* )
% 5 # -11=
2 , ( 9
, # -
* $ "& . '"
%&
<1981= >
" -19.1= (
( ( : ( :
'" ' ( ' / ?
&)
&) " " $ + '(
% 5 / " / ?
+ " (
( '( ' .01
#" ) ! 4 4
* # ) ! / ( /
+ " ) ,)
&+ ( + %)
# #
& )* , (
/ #
- - ! ./
* %*$ ) )
-
* % $ ) ) )
! " #
% 0( * % )$
%*
# . -
$ % $&
' #
$$0
1 ,- %, ), )
( ) * % ) )$
+ * %
), )
1 # 3 1.
) 2 %% +
4 )+ $
% 4 +
)$
%* ,* % ) +
•
•
• !
• "# $$
! "
! "
! "
Material Safety Data Sheet - OSHA 174 H.M.I.S. RATING
Materials Safety Data Sheet US Department of Labor Health 1
May be used to comply with OSHA's Hazard Occupational Safety and Health Administration
Communication Standard, 29 CFR 1910.1200. (Non-Mandatory Form) Form Approved OMB No. Flammability 0
Standard must be consulted for specific requirements. 1218-0072
Reactivity 0
6/27/2003 Protective Equip. B
Formula BU790MT: 5/30/2003
Section I
Manufacturer's Name Emergency Telephone Telephone
HENRY COMPANY 800-486-1278 800-486-1278
Address Primary Contact Email
HENRY COMPANY Technical Services techservices@henry.com
2911 Slauson Ave NFPA Preparer's Signiture
HUNTINGTON PARK, CA 90255 704
If Ingested
Symptoms Emergency and First Aid Procedures
-- May be a health hazard if ingested in large quantities. -- Ingestion is unlikely, but do not induce vomiting and call a
physician immediately.
If Inhaled
Symptoms Emergency and First Aid Procedures
-- Smoke fumes if burned may cause dizziness, headaches, -- Remove from vapor immediately.
even unconsciousness. -- If overcome, call physician.
-- If breathing has stopped or is irregular, start resuscitation or
administer oxygen, as needed.
If on Skin
Symptoms Emergency and First Aid Procedures
-- Hot product will cause severe burns. -- If hot, cool quickly in cool water and see a physican for
extensive burns. Do not peel from skin or use solvent to
dissolve. Use vegetable or mineral oil to remove the cooled
material from the skin.
Local Exhaust
N/A
Mechanical (General)
N/A
Special Ventilation
N/A
Other
Exhause ventilation required in confined areas.
Respirator
Use with adequate ventiliation.
Gloves
Normal work gloves
Goggles
Wear eye protection
Clothing
Long sleeves and pants
Non-Bulk
Hot-Bulk
Cold-Bulk
By Water
Non-Bulk
Hot-Bulk
Cold-Bulk
Non-Bulk
Hot-Bulk
Cold-Bulk
State Addendum
Ingredient CAS Number Notes
See current Material Safety Data Sheet.
Aromatic Distillation Residue 68478.13.7
A Florida Toxic Substances List material
Hydrogen Sulfide 7783.06.4
A Massachusetts Hazardous Substance List material
Hydrogen Sulfide 7783.06.4
A Michigan Critical Materials Register substance
Hydrogen Sulfide 7783.06.4
A Minnesota Hazardous Substance List material
Hydrogen Sulfide 7783.06.4
A New York List of Hazardous Substances material
Hydrogen Sulfide 7783.06.4
A Pennsylvania Hazardous Substance List material
Hydrogen Sulfide 7783.06.4
A Washington Permissible Exposure for Air Contaminants material
Hydrogen Sulfide 7783.06.4
A Washington Permissible Exposure for Air Contaminants material
Asphalt 8052.42.4
A substance listed by CA under the "Safe Drinking Water and Toxic Enforcement Act of 1989"
Asphalt 8052.42.4 (Proposition 65).
A Florida Toxic Substances List material
Asphalt 8052.42.4
A Massachusetts Hazardous Substance List material
Asphalt 8052.42.4
A Minnesota Hazardous Substance List material
Asphalt 8052.42.4
A Pennsylvania Hazardous Substance List material
Asphalt 8052.42.4
790-11EV
Environmental Grade
Hot Applied Rubberized Asphalt
Waterproofing/Roofing Membrane
Description
790-11EV is an environmentally friendly, hot applied, rubberized asphalt formulated to provide a monolithic fully bonded roofing and
waterproofing membrane. It is hot poured in a single or fabric reinforced application. 790-11 EV is composed of a specially selected
blend of refined asphalts, synthetic rubber and mineral stabilizers and contains at least 25% post consumer recycled content. It
is modified with additives to promote adhesion and improve low temperature flexibility.
Features
REVISION: 05/05/2003
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255
Technical Services - Phone: (800) 486-1278 – E-mail: techservices@henry.com
Henry Company is the parent company of Bakor Inc. Monsey Bakor is now Henry Company
Please visit our web site www.henry.com for the most current Technical Data and Material Safety Data Sheets
790-11EV Environmental Grade Hot Applied Rubberized Asphalt
Packaging
790-11EV is packaged in standard 50 lb. boxes and 55 gallon drums (approximately 500 lb).
Uses
Used as a waterproofing and roofing membrane on horizontal and vertical surfaces. Ideal for highway bridge decks, underground
parking, ramps, podium decks, railway bridge decks, parking decks, plaza decks, tunnels, planters, reflective polls and protected roof
membrane assemblies.
Limitations
Must be protected by appropriate overlay. Not intended for use as a permanently exposed surface, although it will tolerate foot and
incidental, light, rubber-wheeled traffic when set. Contact Henry when using in direct contact with coal-tar pitch derivatives or products
containing coal-tar pitch. Do not heat above 419ºF. Do not melt in direct fired, single-wall kettles.
Preparation
Refer to Henry Waterproofing and Protected Membrane Roofing Guide Specification for detailed application information.
Acceptable substrates are cast-in-place and precast concrete, gypsum board and plywood. Joints, cracks and expansion joints must
be treated as per detailed Guide Specifications. Lightweight concrete is not an acceptable substrate. Concrete toppings and cast-in-
place concrete on vented metal pan decks require fabric-reinforced systems. Contact Henry for detailed specification.
Surfaces to be treated should be reasonably smooth. Concrete should have wood float finish and be cured a minimum of 14 days.
Steel float finishes are too smooth. Rough surfaces tend to promote air entrapment in the compound during application, which might
result in pin holing through the waterproofing membrane. Such surfaces also require use of more material. Fabric reinforced systems
overcome pin holing. Before application of hot rubberized asphalt, the substrate shall be clean and dry, free from surface water, ice,
snow or frost, dust, dirt, oil, grease, curing compounds or any other foreign matter detrimental to the adhesion of the hot rubberized
asphalt.
Apply 930-18 Primer at 200-300 ft²/gal. or Henry 910-01(or Henry #103 or Henry #104) Primer at 500ft²/gal according to project
requirements, avoiding an excessive or over-spraying application. Ponding of the primer is not permitted. The primer shall be dry before
applying the hot rubberized asphalt. Gypsum board and plywood do not require a primer. Apply Flashing Sheet to all areas specified
such as parapets, expansion joints, drains etc.
Application
Melt 790-11EV in oil-jacketed kettle and bring to a temperature of 356°F to 392°F. Pour melted material on surface to be covered and
spread to an average thickness of 185 mils and a minimum thickness of 125 mils using rubber squeegees. Fabric reinforced systems
consist of two applications of 790-11EV reinforced with Polyester Fabric. Apply first application at minimum thickness of 90 mils;
embed fabric immediately overlapping a maximum of 1/4" ensuring full contact. Apply second application at a minimum of 125 mils
thickness.
Protection
Both horizontal and vertical areas must be protected. Asphaltic Protection Board must be used where asphalt paving traffic surfaces
will be installed directly over the protection layer.
Clean Up
Caution
HOT ASPHALT AFTER MELTING! Contact with hot asphalt or applicator will cause burns. Avoid contact with all parts of body.
Wear protective clothing at all times. USE ONLY WITH ADEQUATE VENTILATION! Avoid breathing fumes. Asphalt fumes are an
irritant, and may contain traces of hydrogen sulfide. Fumes may cause irritation to eyes, nose, throat, respiratory tract, and skin. If
you experience eye watering, headaches or dizziness, leave area or increase fresh air or wear respirator (NIOSH/MSHA TC 23C or
equal). KEEP OUT OF REACH OF CHILDREN.
REVISION: 05/05/2003
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255
Technical Services - Phone: (800) 486-1278 – E-mail: techservices@henry.com
Henry Company is the parent company of Bakor Inc. Monsey Bakor is now Henry Company
Please visit our web site www.henry.com for the most current Technical Data and Material Safety Data Sheets
790-11 Hot Applied Rubberized Asphalt
Limited Warranty
We, the manufacturer, warranty only that this product is free of defects, since many factors which affect the results obtained from
this product - such as weather, workmanship, equipment utilized and prior condition of the substrate - are all beyond our control.
We will replace at no charge any product proved to be defective within 12 months of purchase, provided it has been applied in
accordance with our written directions for uses we recommended as suitable for this product. Proof of purchase must be provided.
DISCLAIMER OF WARRANTIES: The Limited Warranty is IN LIEU OF any other warranties express or implied including but not
limited to any implied warranty of MERCHANTABILITY or fitness for a particular purpose, and we, the manufacturer, shall have no
further liability of any kind including liability for consequential or incidental damages resulting from any defects or any delays caused
by replacement or otherwise. <>
REVISION: 05/05/2003
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255
Technical Services - Phone: (800) 486-1278 – E-mail: techservices@henry.com
Henry Company is the parent company of Bakor Inc. Monsey Bakor is now Henry Company
Please visit our web site www.henry.com for the most current Technical Data and Material Safety Data Sheets
BAKOR INC.
10 St-Pierre, Lachine, Quebec H8R 1N7
Tel.:(514) 364-5224 Fax:(514)364-7270
II - HAZARDOUS INGREDIENTS
INGREDIENTS % CAS # EXPOSURE LIMITS LD50/LC50(SPECIES & ROUTE)
Stoddard Solvent 30-60 8052-41-3 100 ppm (ACGIH) LD50 (oral-rat) = 5 g/kg
LC50 (inhal.-rat) = 5 g/m3
MEANS OF EXTINCTION Foam, carbon dioxide, dry chemicals, water spray (for small fires).
SPEC. FIRE FIGHTING PROCEDURES Contain spill. Cover with extinguishing agents. Use water spray to cool fire-exposed containers.
Self-contained equipment and full protective clothing when fumes or smoke are present.
V - PREPARATION OF M.S.D.S.
PREPARED BY: PHONE NUMBER DATE
WHMIS Group (514) 364-5224 September 2000
VI - REACTIVITY DATA 910-01
CHEMICAL [ X ] YES CONDITIONS TO AVOID:
STABILITY [ ] NO Avoid heat and open flames.
INCOMPATIBILITY Strong oxidizing agents may ignite the product.
(SUBSTANCE TO AVOID)
CONDITIONS Not applicable.
OF REACTYVITY
HAZARDOUS DECOMPOS- Will not decompose under normal conditions of handling or warehousing.
ITION PRODUCTS
EFFECTS OF Prolonged or repeated contact with skin will cause irritation, defatting, dermatitis. Vapours may
CHRONIC EXPOSURE also irritate eyes, nose and throat.
EYES Flush eyes thoroughly with plenty of lukewarm water. Get medical attention.
IX - PREVENTIVE MEASURES
EYES: Safety goggles if applied by spray.
PERSONAL GLOVES: Suggested (neoprene, nitrile)
PROTECTIVE CLOTHING: Oil resistant apron and/or clothing if direct contact is likely.
EQUIPMENT RESPIRATORY: Approved organic vapour mask in confined areas or if applied by spray.
ENGINEERING CONTROLS Exhaust ventilation required in confined areas. Local exhaust, if necessary, to maintain TLV.
(VENTILATION, ETC.)
LEAK AND SPILL Avoid breathing fumes and contact with skin and eyes.
PROCEDURE Avoid all sources of ignition. Contain spill with sand or earth. Remove to disposal containers.
WASTE Approved incineration or sanitary landfill as per local, provincial, state and federal
DISPOSAL regulations.
STORAGE REQUIREMENTS Store in cool, well-ventilated areas. Keep away from ignition sources.
SHIPPIING INFORMATION TDG regulations not applicable for shipments by road vehicle of 454L or less.
Tars, liquid; UN1999; Class3, Packing Group III.
While Bakor Inc. believes that the data contained herein are factual & opinionsexpressed are those of qualified experts regarding the results of the
tests conducted, the data is not to be taken as warranty or representation for which Bakor Inc. assumes legal responsibility. These are offered solely for your
consideration, investigation and verification. Any use of this data and information must be determined by the user to be in accordance with federal,
provincial or municipal laws and regulations.
TECHNICAL DATA SHEET
910-01
Penetrating Asphalt Primer
Physical Properties
Description
Uses
For priming and sealing dusty, absorbent surfaces to improve bonding of asphalt coatings and finishes. Used for priming thermal
insulation, concrete, masonry, gypsum, asbestos, asphalt roofing felts and similar surfaces.
Limitations
Avoid use where solvent odors may taint food or other susceptible products. Do not apply over coal-tar coatings.
Do not apply to wet surfaces
Preparation
Surfaces must be dry and free from dust, dirt, grease and other foreign matter.
Application
Apply by brush, roller or spray. Protect new work from open flame or adjacent welding activity.
Clean Up
REVISION: 15/07/02
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255
Technical Services - Phone: (800) 486-1278 – E-mail: techservices@henry.com
Henry Company is the parent company of Bakor Inc. Monsey Bakor is now Henry Company
Please visit our web site www.henry.com for the most current Technical Data and Material Safety Data Sheets
910-01 Penetrating Asphalt Primer
Caution
CAUTION! COMBUSTIBLE! Contains petroleum distillate. Keep away from heat and flame. Do not heat container or store at
temperatures greater than 120ºF. CLOSE AIR INTAKES on roof until solvents dissipate. Contains volatile solvents that might
contaminate potable water. Close container after each use. DANGER! HARMFUL OR FATAL IF SWALLOWED! If swallowed, do not
induce vomiting. CALL PHYSICIAN IMMEDIATELY! Use protective measures to avoid contact with eyes and skin. In case of eye
contact, open eyelids wide and flush immediately with plenty of water for at least 15 minutes. GET MEDICAL ATTENTION! USE ONLY
WITH ADEQUATE VENTILATION! Avoid breathing of vapor. If you experience eye watering, headaches or dizziness, leave area or
increase fresh air or wear respirator (NIOSH/MSHA TC 23C or equal). Repeated and prolonged occupational exposure to solvents can
result in permanent brain and nervous system damage. KEEP OUT OF REACH OF CHILDREN.
Limited Warranty
We, the manufacturer, warranty only that this product is free of defects, since many factors which affect the results obtained from this
product – such as weather, workmanship, equipment utilized and prior condition of the substrate – are all beyond our control. We will
replace at no charge any product proved to be defective within 12 months of purchase, provided it has been applied in accordance with
our written directions for uses we recommended as suitable for this product. Proof of purchase must be provided. DISCLAIMER OF
WARRANTIES: The Limited Warranty is IN LIEU OF any other warranties express or implied including but not limited to any implied
warranty of MERCHANTABILITY or fitness for a particular purpose, and we, the manufacturer, shall have no further liability of any kind
including liability for consequential or incidental damages resulting from any defects or any delays caused by replacement or otherwise.
<>
REVISION: 15/07/02
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255
Technical Services - Phone: (800) 486-1278 – E-mail: techservices@henry.com
Henry Company is the parent company of Bakor Inc. Monsey Bakor is now Henry Company
Please visit our web site www.henry.com for the most current Technical Data and Material Safety Data Sheets
modifiedPLUS ® TECHNICAL DATA SHEET
G100 s/s
Base/Protection Sheet
Physical Properties
-Thickness 0.080 inches (2.0 mm) ± 10% -Thickness 2.0 mm (80 mils)
-Tensile Strength @ 0ºF -Roll Length 49.2'
Machine Direction 135 lbf/inch -Roll Width 39 3/8"
Cross Machine Direction 117 lbf/inch -Gross Coverage 161.4 ft²
-Elongation @ 0ºF -Net Coverage 147.8 ft²
Machine Direction 4%
Cross Machine Direction 4%
-Tensile Tear Manufactured and Tested in
Machine Direction 80 lbf/inch accordance with ASTM D5147:
Standard Test Method for
Cross Machine Direction 75 lbf/inch
Sampling and Testing of Modified
-Low Temperature Flexibility
Bitumen Roofing Membranes
Machine Direction 0ºF
and/or Manufactured to meet
Cross Machine Direction 0ºF ASTM D6163, Type I, Grade S.
-Dimensional Stability
Machine Stability <0.1%
Cross Machine Stability <0.1%
-Top Surface Sanded
-Bottom Surface Sanded
Uses
modifi edPLUS ® G100s/s Base Sheet is designed for use as the base or first ply in a high performance two-ply modified bitumen
flashings, or as the protection/separator sheet in Henry protected membrane systems with polystyrene insulation.
Features
Limitations
Non-resistant to oils and solvents. Refer to manufacturer for specific chemical resistance. Not designed for permanent exposure.
Install modifiedPLUS ® granule surfaced cap sheet over base sheet for permanent exposure.
Storage
Store rolls on end, on original pallets or elevated platform. Protect from weather or store in an enclosed area not subject to heat over
120°F.
REVISION: 07/15/2002
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255
Technical Services - Phone: (800) 486-1278 – E-mail: techservices@henry.com
Henry Company is the parent company of Bakor Inc. Monsey Bakor is now Henry Company
Please visit our web site www.henry.com for the most current Technical Data and Material Safety Data Sheets
modifiedPLUS ® G100s/s Base/Protection Sheet
Surface Preparation
Protection/Separation Sheet: Place modifiedPLUS ® G100s/s sheet while 790-11 hot applied rubberized asphalt is still warm. Begin
at lowest point or drain. Overlap sheet a minimum 2" on side and 3" on end laps, and broom into place.
Limited Warranty
We, the manufacturer, warranty only that this product is free of defects, since many factors which affect the results obtained from
this product - such as weather, workmanship, equipment utilized and prior condition of the substrate - are all beyond our control.
We will replace at no charge any product proved to be defective within 12 months of purchase, provided it has been applied in
accordance with our written directions for uses we recommended as suitable for this product. Proof of purchase must be
provided. DISCLAIMER OF WARRANTIES: The Limited Warranty is IN LIEU OF any other warranties express or implied including
but not limited to any implied warranty of MERCHANTABILITY or fitness for a particular purpose, and we, the manufacturer, shall
have no further liability of any kind including liability for consequential or incidental damages resulting from any defects or any
delays caused by replacement or otherwise. <>
REVISION: 07/15/2002
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255
Technical Services - Phone: (800) 486-1278 – E-mail: techservices@henry.com
Henry Company is the parent company of Bakor Inc. Monsey Bakor is now Henry Company
Please visit our web site www.henry.com for the most current Technical Data and Material Safety Data Sheets
TECHNICAL DATA SHEET
Roll Sizes
12.5’ x 432’
15’ x 432’
Description
Filter Fabric is a non-woven geotextile made up of polypropylene fibers. These fibers are needled to form a stable and durable network
such that the fibers retain their relative position. It is nonbiodegradable and resistant to most soil chemicals, acids and alkali with a pH
range of 3 to 12.
Uses
Limited Warranty
We, the manufacturer, warranty only that this product is free of defects, since many factors which affect the results obtained from
this product - such as weather, workmanship, equipment utilized and prior condition of the substrate - are all beyond our control.
We will replace at no charge any product proved to be defective within 12 months of purchase, provided it has been applied in
accordance with our written directions for uses we recommended as suitable for this product. Proof of purchase must be provided.
DISCLAIMER OF WARRANTIES: The Limited Warranty is IN LIEU OF any other warranties express or implied including but not
limited to any implied warranty of MERCHANTABILITY or fitness for a particular purpose, and we, the manufacturer, shall have no
further liability of any kind including liability for consequential or incidental damages resulting from any defects or any delays caused
by replacement or otherwise. <>
REVISION: 15/07/03
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255
Technical Services - Phone: (800) 486-1278 – E-mail: techservices@henry.com
Henry Company is the parent company of Bakor Inc. Monsey Bakor is now Henry Company
Please visit our web site www.henry.com for the most current Technical Data and Material Safety Data Sheets
Material Safety Data Sheet - OSHA 174 H.M.I.S. RATING
Materials Safety Data Sheet US Department of Labor Health 2
May be used to comply with OSHA's Hazard Occupational Safety and Health Administration
Communication Standard, 29 CFR 1910.1200. (Non-Mandatory Form) Form Approved OMB No. Flammability 3
Standard must be consulted for specific requirements. 1218-0072
Reactivity 0
6/27/2003 Protective Equip. H
Formula BU930AA: 5/19/2003
Section I
Manufacturer's Name Emergency Telephone Telephone
HENRY COMPANY 800-486-1278 800-486-1278
Address Primary Contact Email
HENRY COMPANY Technical Services techservices@henry.com
2911 Slauson Ave NFPA Preparer's Signiture
HUNTINGTON PARK, CA 90255 704
If Ingested
Symptoms Emergency and First Aid Procedures
-- Gastrointestinal irritation. -- Do not induce vomiting. Call doctor immediately.
-- Nausea, vomiting, diarrhea.
If Inhaled
Symptoms Emergency and First Aid Procedures
-- Dizziness, headaches, even unconsciousness or death. -- Remove from vapor immediately.
-- If overcome, call physician.
-- If breathing has stopped or is irregular, start resuscitation or
administer oxygen, as needed.
If on Skin
Symptoms Emergency and First Aid Procedures
-- Moderate irritation. -- Remove contaminated clothes and wash with a waterless
-- Defatting. handcleaner or soap and water.
-- Dermatitis.
Local Exhaust
Face velocity 60 fpm
Mechanical (General)
N/A
Special Ventilation
Use only with adequate ventilation
Other
N/A
Respirator
Use with adequate ventiliation.
Gloves
Chemical resistant gloves
Goggles
Splash goggles or face shield
Clothing
Chemical resistant apron
Non-Bulk
Hot-Bulk
Cold-Bulk
By Water
Non-Bulk
Hot-Bulk
Cold-Bulk
Non-Bulk
Hot-Bulk
Cold-Bulk
State Addendum
Ingredient CAS Number Notes
A substance listed by CA under the "Safe Drinking Water and Toxic Enforcement Act of 1989"
Toluene 108.88.3 (Proposition 65).
A Florida Toxic Substances List material
Toluene 108.88.3
A Massachusetts Hazardous Substance List material
Toluene 108.88.3
A Michigan Critical Materials Register substance
Toluene 108.88.3
A Minnesota Hazardous Substance List material
Toluene 108.88.3
A New Jersey RTK Hazardous Substance List material
Toluene 108.88.3
A New York List of Hazardous Substances material
Toluene 108.88.3
A Pennsylvania Hazardous Substance List material
Toluene 108.88.3
A Washington Permissible Exposure for Air Contaminants material
Toluene 108.88.3
930-18
Polymer Modified Primer
Physical Properties
Description
930-18 is a synthetic rubber based sealant primer designed for use with thermofused SBS modified bitumen membranes and hot applied
rubberized asphalt membranes.
Features
Uses
Used as a sealant primer for thermofusible sheet membranes and hot applied rubberized asphalt membranes when applied to concrete,
masonry, wood, drywall and metal surfaces.
Limitation
Solvent in product attacks polystyrene insulation. Avoid use where solvent odors may taint food or other susceptible products.
Packaging
Preparation
Surfaces must be sound, well secured, dry and free from frost, dust, dirt, grease, oil or other contaminants.
Application
Apply by brush, roller or spray. Allow primer to dry before applying membrane.
Clean Up
REVISION: 04/04/05
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255
Technical Services - Phone: (800) 486-1278 – E-mail: techservices@henry.com
Henry Company is the parent company of Bakor Inc. Monsey Bakor is now Henry Company
Please visit our web site www.henry.com for the most current Technical Data and Material Safety Data Sheets
930-18 Polymer Modified Primer
Caution
CAUTION! FLAMMABLE LIQUID AND VAPOR. Vapor harmful. Harmful or fatal if swallowed. Contains toluene. Keep away from
heat, sparks, and flame. Do not smoke. Extinguish all flames and pilot lights; turn off all stoves, heaters, electric motors, and other
sources of ignition during use and until all vapors are gone. Do not heat container or store at temperatures greater than 120°F. For
exterior use only; CLOSE AIR INTAKES until solvents dissipate. Contains volatile solvents that might contaminate potable water. Close
container after each use. DANGER! HARMFUL OR FATAL IF SWALLOWED! If swallowed, do not induce vomiting. CALL
PHYSICIAN IMMEDIATELY! May be harmful if absorbed through skin. Use protective measures to avoid contact with eyes and skin. In
case of eye contact, open eyelids wide and flush immediately with plenty of water for at least 15 minutes. GET MEDICAL ATTENTION!
USE ONLY WITH ADEQUATE VENTILATION! Avoid breathing of vapor. If you experience eye watering, headaches or dizziness,
leave area or increase fresh air or wear respirator (NIOSH/MSHA TC 23C or equal). Repeated and prolonged occupational exposure to
solvents can result in permanent brain and nervous system damage. KEEP OUT OF REACH OF CHILDREN. WARNING: This product
contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Limited Warranty
We, the manufacturer, warranty only that this product is free of defects, since many factors which affect the results obtained from this
product - such as weather, workmanship, equipment utilized and prior condition of the substrate - are all beyond our control. We will
replace at no charge any product proved to be defective within 12 months of purchase, provided it has been applied in accordance with
our written directions for uses we recommended as suitable for this product. Proof of purchase must be provided. DISCLAIMER OF
WARRANTIES: The Limited Warranty is IN LIEU OF any other warranties express or implied including but not limited to any implied
warranty of MERCHANTABILITY or fitness for a particular purpose, and we, the manufacturer, shall have no further liability of any kind
including liability for consequential or incidental damages resulting from any defects or any delays caused by replacement or otherwise.
<>
REVISION: 04/04/05
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255
Technical Services - Phone: (800) 486-1278 – E-mail: techservices@henry.com
Henry Company is the parent company of Bakor Inc. Monsey Bakor is now Henry Company
Please visit our web site www.henry.com for the most current Technical Data and Material Safety Data Sheets