Escolar Documentos
Profissional Documentos
Cultura Documentos
Por
Marzo, 2006
iii
Marzo, 2006
iii
2i
RESUMEN
ÍNDICE GENERAL
ÍNDICE DE
TABLAS.............................................................................
..............................xi
ÍNDICE DE
FIGURAS ...........................................................................
............................xiii
CAPÍTULO
I .................................................................................
....................................... 17
INTRODUCCIÓN.......................................................................
......................................... 17
1.1. Planteamiento de
Problema ..........................................................................
................. 18
1.2. Justificación e
Importancia........................................................................
.................... 19
1.3.
Objetivos..........................................................................
.............................................. 20
1.3.1. Objetivo
General ...........................................................................
............................. 20
1.3.2. Objetivo
Específicos........................................................................
........................... 20
1.4.
Limitaciones ......................................................................
............................................ 21
1.5.
Metodología........................................................................
........................................... 22
CAPÍTULO
II.................................................................................
...................................... 25
REDES, FUNDAMENTOS, CLASIFICACIÓN Y APLICACIONES ............................... 25
2.1. Redes de
Telefonía .........................................................................
............................... 25
2.1.1. Terminal
Telefónico ........................................................................
........................... 26
2.1.2. Centrales de
Conmutación........................................................................
.................. 26
2.1.2.1. Técnicas de
Conmutación........................................................................
................ 26
4iii
2.1.2.1.1. Conmutación de
Circuitos .........................................................................
........... 27
2.1.2.1.2. Conmutación de
Paquetes...........................................................................
.......... 27
2.1.2.2. Modulación de
Señales............................................................................
................ 27
2.1.2.3. Bucle
Local..............................................................................
................................ 30
2.1.2.4. Enlace
Troncal............................................................................
............................. 30
2.1.3.
Señalización.......................................................................
......................................... 30
2.2. Redes de
Datos .............................................................................
................................. 38
2.2.3. Topología de
Redes .............................................................................
....................... 41
2.2.3.1. Topología en
Bus................................................................................
..................... 41
2.2.3.2. Topología en
Anillo.............................................................................
.................... 42
2.2.3.3. Topología
Estrella...........................................................................
......................... 43
2.2.4. Conexión de
Red ...............................................................................
......................... 43
2.2.5.1. Redes
PAN ...............................................................................
............................... 44
2.2.5.2. Redes
LAN ...............................................................................
............................... 44
2.2.5.3. Redes
WAN................................................................................
............................. 45
2.2.5.4. Redes
MAN ...............................................................................
.............................. 48
5iv
2.2.6. Mensajes de
Red................................................................................
......................... 49
2.2.6.1.
Unicast ...........................................................................
.......................................... 49
2.2.6.2.
Multicast .........................................................................
......................................... 49
2.2.6.3.
Broadcast .........................................................................
........................................ 49
2.2.7. Interfaces de
Red ...............................................................................
......................... 49
2.2.7.1.
Ethernet...........................................................................
......................................... 50
2.2.7.2. Fast
Ethernet ..........................................................................
.................................. 50
2.2.7.3. 100VG-
AnyLAN ............................................................................
......................... 51
2.2.7.4. Gigabit
Ethernet...........................................................................
............................ 51
2.2.7.5.
WLAN ..............................................................................
....................................... 51
2.2.8. Normalización
IEEE...............................................................................
.................... 52
2.2.8.1. IEEE
802.11 ............................................................................
................................ 54
2.2.8.2. IEEE
802.11b ...........................................................................
............................... 54
2.2.8.3. IEEE
802.11a............................................................................
............................... 55
2.3.8.4. IEEE
802.11g ...........................................................................
............................... 56
2.2.8.5. IEEE
802.11n ...........................................................................
............................... 56
2.2.8.6. IEEE
802.11e............................................................................
............................... 56
2.3. Red de
Acceso ............................................................................
................................... 57
2.3.1. Tecnologías
ADSL ..............................................................................
....................... 58
6v
2.3.2.1.3.
Infrarrojo.........................................................................
...................................... 68
2.3.2.3.2 Infraestructura:
Cliente/Servidor ..................................................................
......... 72
2.3.2.4.1. Tarjetas de
Red ...............................................................................
...................... 74
2.3.2.4.2. Puntos de
Acceso.............................................................................
..................... 75
2.3.2.4.2.1.2. Modo
Repetidor..........................................................................
.................... 76
2.3.2.4.2.1.3. Modo
Reserva............................................................................
..................... 76
2.3.2.4.3.
Antenas ...........................................................................
...................................... 76
2.3.2.4.3.1. Antenas
Direccionales .....................................................................
.................. 76
2.3.2.4.3.2. Antenas
Omnidireccionales..................................................................
............. 77
2.3.2.4.3.3. Antenas
Sectoriales .......................................................................
.................... 78
2.3.2.5.
PoE ...............................................................................
........................................... 80
2.3.2.6.
Seguridad .........................................................................
........................................ 80
2.3.2.6.1.1.
Cifrado ...........................................................................
.................................... 82
2.3.2.6.1.2.
Autenticación......................................................................
............................... 83
2.3.2.6.1.3.
Características....................................................................
................................ 84
2.3.2.6.1.4
Algoritmos ........................................................................
.................................. 84
2.3.2.6.1.5.2.
Sniffing ..........................................................................
................................. 88
2.3.2.6.1.5.2.1. Métodos de
Sniffing ..........................................................................
.......... 89
2.3.2.6.1.5.2.2. Identificación de
Estaciones ........................................................................
89
2.3.2.6.1.5.2.3. Ataques
Pasivos............................................................................
............... 89
vii
2.3.2.6.1.5.2.4. Ataques
Activos............................................................................
............... 89
2.3.2.6.1.5.3. Vulnerabilidad
RC4................................................................................
........ 91
2.3.3. IEEE
802.11b ...........................................................................
.................................. 91
2.3.1.4.
802.1X ............................................................................
......................................... 96
2.3.1.5.1. EAP-
TLS ...............................................................................
............................... 99
2.3.1.5.2. EAP-
TTLS...............................................................................
............................. 99
2.3.1.5.3.
PEAP ..............................................................................
...................................... 99
2.3.1.6.1. EAP-
MD5................................................................................
........................... 100
2.3.1.6.2.
LEAP ..............................................................................
.................................... 101
2.3.1.6.3. EAP-
SPEKE .............................................................................
.......................... 101
viii
2.3.4. Tecnologías
V5.................................................................................
........................ 102
2.3.3.1. Protocolos de
V5 ................................................................................
................... 104
2.3.3.2. Funcionamiento de
V5 ................................................................................
.......... 106
CAPÍTULO
III ...............................................................................
.................................... 108
3.3.1. Infraestructura de
Telefonía..........................................................................
............ 114
CAPÍTULO
IV ................................................................................
................................... 118
LA RED DE
MOVISTAR...........................................................................
....................... 118
4.1.2. Servicios de
Internet ..........................................................................
....................... 119
CAPÍTULO
V .................................................................................
................................... 124
ix
10
5.1. Descripción de la
Propuesta .........................................................................
............... 125
5.1.1. Nodo
Multiservicio......................................................................
............................. 125
5.1.1.3. Equipos
Utilizados.........................................................................
........................ 136
5.1.1.5 Dimensionamiento de la
Red................................................................................
.. 140
5.1.1.6. Implementación de la
Solución ..........................................................................
... 142
5.1.1.8. Plan de
Pruebas............................................................................
......................... 145
CAPÍTULO
VI ................................................................................
................................... 147
6.1.7. Requisitos de
Seguridad .........................................................................
.................. 158
6.2.1. D-
Link ..............................................................................
........................................ 161
6.2.3.
Cisco .............................................................................
............................................ 166
6.2.4.
Aphelion ..........................................................................
......................................... 171
6.5. Diseño de la
Red................................................................................
.......................... 179
6.5. Implementación de la
Solución ..........................................................................
......... 182
6.5.1. Listado de
Equipos ...........................................................................
........................ 182
CONCLUSIONES Y
RECOMENDACIONES .................................................................
184
Conclusiones.......................................................................
................................................ 184
Recomendaciones ...................................................................
............................................ 186
REFERENCIAS .......................................................................
.......................................... 188
GLOSARIO ..........................................................................
.............................................. 191
ANEXOS.............................................................................
............................................... 208
12
ÍNDICE DE TABLAS
Tabla
Pág.
2.1: Tecnologías
Inalámbricas.......................................................................
...................... 48
PCI. ..............................................................................
................................................ 169
CardBus. ..........................................................................
............................................ 170
xii
13
600AG..............................................................................
............................................ 172
ÍNDICE DE FIGURAS
Figura
Pág.
2.1: Marcación
Multifrecuencia. ..................................................................
....................... 32
2.3: Métodos de
Señalización.......................................................................
....................... 34
2.4: Esquema de
Señalización. .....................................................................
....................... 36
2.6: Red de
Acceso.............................................................................
................................. 58
2.7: Alternativas de
Acceso.............................................................................
.................... 58
2.8: Enlace
ADSL. .............................................................................
................................. 60
2.19: Antena
Direccional........................................................................
............................. 77
2.20: Antena
Omnidireccional. ..................................................................
......................... 78
xiv
15
2.21: Antena
Sectorial. ........................................................................
................................ 79
2.23: Cifrado
RC4. ..............................................................................
................................ 86
2.24: Descifrado
RC4................................................................................
.......................... 87
2.26: Frecuencias
Solapadas..........................................................................
...................... 93
16
5.7: Perfil
Topográfico. ......................................................................
............................... 133
5.12: Armario de
Interconexión. ....................................................................
................... 141
CAPÍTULO I
INTRODUCCIÓN
1.3. Objetivos
• Diseño de una red telefónica local fija con servicios de Internet de banda
ancha de
uso residencial para Movistar.
• Determinar y analizar las bases teóricas que sustenten el diseño de una red
telefónica local fija de uso residencial, por medio de interfases de acceso
distribuido
V5.2 y acceso a datos ADSL o Wi-Fi.
1.4. Limitaciones
La principal limitación que enfrenta este trabajo gira entorno a que, debido
a
Políticas de Seguridad y Normas de Confidencialidad de Movistar Venezuela, como
autores
nos hemos visto forzados a omitir intencionalmente información general y/o
específica con
respecto a algunos tópicos del proyecto.
Por otra parte, con respecto a la adecuación de este diseño a los sistemas
de
conmutación instalados y en producción de Movistar, no serán tomadas en cuenta para
el
proyecto las Centrales Motorola “EMX-2500”, Lucent “5ESS”, debido a que por
topologías
de las redes definidas por el Personal de Ingeniería de Movistar, estas centrales
están
destinadas para uso exclusivo de las redes celulares.
1.5. Metodología
CAPÍTULO II
• El terminal telefónico.
• Las centrales de conmutación.
• La señalización.
26
Esta técnica es parecida a la anterior, sólo que emplea mensajes más cortos
y de
longitud fija (paquetes, también llamados datagramas, tramas o celdas), lo que
permite el
envío de los mismos sin necesidad de recibir el mensaje completo que, previamente,
se ha
troceado. Cada uno de estos paquetes contiene información suficiente sobre la
dirección, así
como para el control del mismo en caso de que suceda alguna anomalía en la red.
por equipos amplificadores que detectan y amplifican las señales telefónicas, para
vencer
así las pérdidas que se producen en los medios de transmisión.
2.1.3. Señalización
Este tipo de señalización se denomina Señalización por Canal Común CCS (La
nomenclatura SS7 corresponde al ITU-T y CCS7 a ANSI). Las principales
características
que identifican a la señalización CCS frente a CAS son:
• Encaminamiento alternativo.
Los protocolos del sistema de señalización por canal común nº 7 (SS7) fueron
desarrollados por AT&T a partir de 1975 y definidos como un estándar por el UIT-T
en
1981 en la serie de Recomendaciones Q.7XX del UIT-T. [2]
• MTP-3. Posee una dirección de punto de acceso que permite identificar a la capa
superior (TCAP o ISUP sobre el protocolo MTP3). En la red PSTN se dispone de
las direcciones de procesador CPU de origen y destino (14 bits de dirección).
Por
otro lado, identifica el enlace de señalización utilizado cuando existe más de
uno.
Realiza las funciones de Routing dentro de la red de señalización SS7.
• Nodo o Host: Ente o equipo de conectividad que forma parte de una red siendo
indiferente a la función que desempeñe (PC, Switch, Router, entre otros).
• Medio Físico: Desde los conectores y cables hasta la fibra óptica de alta
velocidad,
los enlaces físicos que conectan todo entre si son el fundamento de la
interconexión
de una red.
39
Existe una muy amplia variedad de protocolos. Muchos de ellos han caído en
desuso para dar paso a protocolos más poderosos, tal es el caso del TCP/IP, que ha
venido
acaparando mercado gracias a que es utilizado por Internet.
Los protocolos de alto nivel manejan procesos más complejos, tales como
solicitar
información de identificación del usuario, decidir la ruta óptima para alcanzar un
destino y
40
Otra propiedad interesante es que el Bus actúa como medio pasivo y por lo
tanto, en
caso de extender la longitud de la red, el mensaje no debe ser regenerado por
repetidores
(los cuales deben ser muy fiables para mantener el funcionamiento de la red). En
este tipo
de topología cualquier ruptura en el cable impide la operación normal y es muy
difícil de
detectar. Por el contrario, el fallo de cualquier nodo no impide que la red siga
funcionando
normalmente, lo que permite añadir o quitar nodos a la red sin interrumpir su
funcionamiento.
excesivamente difícil de instalar, aunque gaste más cable que un Bus, pero el costo
de
mantenimiento sin puntos centralizadores puede ser intolerable. La combinación
estrella/anillo puede proporcionar una topología muy fiable sin el costo exagerado
de cable
como estrella pura.
• PAN
• LAN
• WAN
• MAN
Se puede comparar el software que gestiona una red local con el sistema
operativo
de una computadora. Los programas y utilidades que componen el software de la LAN,
hacen de puente de unión entre el usuario y el núcleo central de la computadora.
Las Redes de Área Extensa (Wide Area Network) son redes punto a punto que
interconectan países y continentes. Al tener que recorrer una gran distancia sus
velocidades
son menores que en las LAN aunque son capaces de transportar una mayor cantidad de
datos. El alcance es una gran área geográfica, como por ejemplo: una ciudad o un
continente. Está formada por una vasta cantidad de computadoras interconectadas
(llamadas hosts), por medio de subredes de comunicación o subredes pequeñas, con el
fin
de ejecutar aplicaciones, programas, etc.
Las redes LAN comúnmente, se conectan a redes WAN, con el objetivo de tener
acceso a mejores servicios, como por ejemplo a Internet. Las redes WAN son mucho
más
complejas, porque deben enrutar correctamente toda la información proveniente de
las
redes conectadas a ésta.
46
• Conmutación de circuitos
• Conmutación de paquetes
Ancho de 9.6
a 384
< 1 Mbps 2 a 54 + Mbps 22+ Mbps
banda
Kbps
Corto Medio Medio-
Largo
Alcance
Muy corto Largo
Telefonía
móvil,
Domésticas, Interconexión
celular,
Redes
Aplicaciones PDA’s de redes
satélite, Redes
Corporativas
Entorno Oficina Corporativas Radio
Terrestre
GPS
• Unicast
• Multicast
• Broadcast
2.2.6.1. Unicast
2.2.6.2. Multicast
2.2.6.3. Broadcast
• Ethernet
• Fast Ethernet
50
• 100VG-AnyLAN
• Gigabit Ethernet
• WLAN
2.2.7.1. Ethernet
2.2.7.3. 100VG-AnyLAN
Es una extensión del estándar Ethernet IEEE 802.3, en el cual ofrecen 100
Mbps de
velocidad manteniendo total compatibilidad con redes Ethernet y Fast Ethernet. La
innovación aquí es que la transmisión predeterminada es full-duplex pero permite
half-
duplex, además mantiene el formato de la trama Ethernet y Fast Ethernet. Gigabit
Ethernet
ha sido diseñada para trabajar sobre fibra óptica pero permite la utilización de
cableado
UTP nivel 6 y cable coaxial.
2.2.7.5. WLAN
El uso más frecuente de las WLAN es como extensión de las redes cableadas de
modo que se da una conexión a un usuario final móvil.
52
En junio del año 1997 el IEEE ratificó el estándar para WLAN IEEE 802.11,
que
alcanzaba una velocidad de 2 Mbps, con una modulación de señal de espectro
expandido
por secuencia directa (DSSS), aunque también contempla la opción de espectro
expandido
por salto de frecuencia, FHSS en la banda de 2,4 GHz, y se definió el
funcionamiento y la
interoperabilidad entre redes inalámbricas.
El 802.11 es una red local inalámbrica que usa la transmisión por radio en
la banda
de 2.4 GHz, o infrarroja, con regímenes binarios de 1 a 2 Mbps. El método de acceso
al
medio MAC (Medium Access Mechanism) es mediante escucha pero sin detección de
colisión, CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance).
normalizadas a nivel físico son: 5,5 - 2 y 1 Mbps) y un alcance de 100 metros, que
al igual
que Bluetooth y Home RF, también emplea la banda de ISM de 2,4 GHz, pero en lugar
de
una simple modulación de radio digital y salto de frecuencia FH (Frequency
Hopping),
utiliza una la modulación lineal compleja (DSSS). Permite mayor velocidad y el
alcance
puede llegar a los 100 metros, suficientes para un entorno de oficina o
residencial. Debido
al espacio ocupado por la codificación del protocolo CSMA/CA, en la práctica, la
velocidad máxima de transmisión con este estándar es de aproximadamente 5.9 Mbps
sobre
TCP y 7.1 Mbps sobre UDP. [5]
Con el estándar 802.11e para multimedia, que está diseñada para mejorar la
entrega
de audio y vídeo en transferencia continua, la tecnología IEEE 802.11 soporta
tráfico en
tiempo real en todo tipo de entornos y situaciones. Las aplicaciones en tiempo real
son
ahora una realidad por las garantías de Calidad de Servicio (QoS) proporcionado por
el
802.11e. El objetivo del nuevo estándar 802.11e es introducir nuevos mecanismos a
nivel
57
de capa MAC para soportar los servicios que requieren garantías de Calidad de
Servicio.
Para cumplir con su objetivo IEEE 802.11e introduce un nuevo elemento llamado
“Hybrid
Coordination Function” (HCF) con dos tipos de acceso:
Hoy en día el estándar 802.11 Super G, con una banda de 2.4 GHz y 5 GHz,
logra
una velocidad de transferencia de 108 Mbps, sostiene WPA y WEP para su protección y
es
compatible con 802.11b y dispositivos 802.11g.
La red de acceso abarca los elementos tecnológicos que soportan los enlaces
de
telecomunicaciones entre los usuarios finales y el último nodo de la red. Sus
principales
componentes son: los medios de comunicación (par de cobre, cable coaxial, fibra
óptica,
canal radioeléctrico) y los elementos que realizan la adecuación de la señal a los
mismos.
-( )-
RED DE ACCESO
(Par de Cobre, Coaxial, Fibra, NODO
CENTRAL
DE
CONMUTACION
Radio, Satélite, Telefonía Móvil)
USUARIO
xDSL esta formado por un conjunto de tecnologías que proveen un gran ancho
de
banda sobre circuitos locales de cable de cobre, sin amplificadores ni repetidores
de señal a
lo largo de la ruta del cableado, entre la conexión del cliente y el primer nodo de
la red. Son
unas tecnologías de acceso punto a punto a través de la red pública, que permiten
un flujo
de información tanto simétrico como asimétrico y de alta velocidad sobre el bucle
de
abonado.
operan en un margen de frecuencias mucho más amplio que va desde los 24 KHz hasta
los
1104 KHz, aproximadamente. Esto hace que el ADSL pueda coexistir en un mismo lazo
de
abonado con el servicio telefónico, pues no se solapan sus intervalos de
frecuencia, cosa
que no es posible con un módem convencional pues opera en banda vocal, la misma que
la
telefonía, lo que constituye otra diferencia de gran importancia. [9]
Cuanto mayor es esta relación, tanto mayor es el caudal que puede transmitir
por
una subportadora. Esta estimación de la relación Señal/Ruido se hace al comienzo,
cuando
se establece el enlace entre el ATU-R y el ATU-C, por medio de una secuencia
predefinida.
la modulación ADSL DMT con FDM y en la Figura 2.11 la modulación ADSL DMT con
cancelación de eco.
En la modulación ADSL DMT con FDM los espectros de las señales ascendente y
descendente no se solapan, lo que simplifica el diseño de los módems, aunque reduce
la
capacidad de transmisión en sentido descendente, no tanto por el menor número de
subportadoras disponibles como por el hecho de que las de menor frecuencia,
aquellas para
las que la atenuación del par de cobre es menor, no están disponibles. En la
modulación
ADSL DMT con cancelación de eco se basa en un cancelador de eco para la separación
de
63
Como se puede ver, los espectros nunca se solapan con la banda reservada
para el
servicio telefónico básico POTS, (Plain Old Telephone Service), y en cambio sí se
solapan
con los correspondientes al acceso básico RDSI. Por ello el ADSL y el acceso básico
RDSI
son incompatibles, aunque existen implementaciones que logran la compatibilidad.
Ambas cosas explican que el caudal máximo que se puede conseguir mediante
los
módems ADSL varíe en función de la longitud de la línea de abonado. La presencia de
ruido externo provoca la reducción de la relación Señal/Ruido con la que trabaja
cada una
de las subportadoras, y esa disminución se traduce en una reducción del caudal de
datos que
modula a cada subportadora, lo que a su vez implica una reducción del caudal total
que se
puede transmitir a través del enlace entre el ATU-R y el ATU-C.
estándar 802.11 define una sub-capa MAC, los servicios y protocolos MAC y tres
capas
físicas (PHY). En la tabla 2.4 se muestra el formato de las tramas 802.11.
• Infrarojo Difuso
2.3.2.1.3. Infrarrojo
• Punto-a-Punto
• Cuasi-Difuso
• Difuso
Al contrario que Ethernet que envía señales hasta que encuentra una
colisión,
CSMA/CA tiene mucho cuidado de no transmitir nada hasta que la unidad receptora
esta
escuchando y no hay nadie más transmitiendo. Esto se denomina LBT (Listening Before
Talking). Antes de que un paquete sea enviado, el dispositivo se pone a la escucha
para
saber si hay alguien transmitiendo. Si hay alguien transmitiendo, el dispositivo
espera
durante un periodo de tiempo predeterminado, pasado el cual, se pone a la escucha
de
nuevo. Si nadie más esta usando el medio, comienza a transmitir. Si no, repite el
ciclo de
espera.
• Asociación: Este proceso es el que le dará acceso a la red y solo puede ser
llevado a cabo una vez autenticado.
• Seguridad: Mediante WEP, con este protocolo se cifran los datos pero no los
encabezados.
• Modo ahorro de energía: Cuando esta activado este modo, el cliente envió
previamente al AP una trama indicando “que se irá a dormir”, El AP, coloca
en su buffer estos datos. Se debe tener en cuenta que por defecto este modo
suele estar inactivo (lo que se denomina Constant Awake Mode: CAM).
72
Una red Ad-hoc es una red simple donde se establecen comunicaciones entre
las
múltiples estaciones en un área de cobertura dada sin el uso de un punto de acceso
o
servidor. La norma especifica la etiqueta que cada estación debe observar para que
todas
ellas tengan un acceso justo a los medios de comunicación inalámbricos. Proporciona
métodos de petición de arbitraje para utilizar el medio para asegurarse de que el
rendimiento se maximiza para todos los usuarios del conjunto de servicios base. En
la
Figura 2.16 se ilustra la topología de la red Ad-hoc.
se usa para manejar el tráfico desde la radio móvil hasta las redes cliente /
servidor
cableadas o inalámbricas. Esta configuración permite coordinación puntual de todas
las
estaciones en el área de servicios base y asegura un manejo apropiado del tráfico
de datos.
El punto de acceso dirige datos entre las estaciones y otras estaciones
inalámbricas y/o el
servidor de la red. Típicamente las WLAN controladas por un punto de acceso central
proporcionará un rendimiento mucho mayor. En la Figura 2.17 se ilustra la topología
de la
red cliente/servidor. [8]
• ESS (Extended Service Set): Tanto BSS como DS permiten crear redes
inalámbricas
de tamaño arbitrario, este tipo de redes se denominan redes ESS.
El AP actúa como puente para poder interconectar más de dos LAN separadas
(ubicadas en edificios diferentes).
2.3.2.4.3. Antenas
Orientan la señal en una dirección muy determinada con un haz estrecho pero
de
largo alcance. Una antena direccional actúa de forma parecida a un foco que emite
un haz
de luz concreto y estrecho pero de forma intensa (más alcance).
77
2.3.2.5. PoE
2.3.2.6. Seguridad
Y no sólo eso, sino que también se pueden inyectar nuevos paquetes o modificar los
ya
existentes (ataques activos). Las mismas precauciones que tenemos para enviar datos
a
través de Internet deben tenerse también para las redes inalámbricas.
Una estación de red que reciba una solicitud puede conceder la autorización
a
cualquier estación, o sólo a aquellas que estén incluidas en una lista predefinida.
En un
sistema de clave compartida, sólo aquellas estaciones que posean una llave cifrada
serán
autenticadas.
Aunque los sistemas WLAN pueden resistir las escuchas ilegales pasivas, la
única
forma efectiva de prevenir que alguien pueda comprometer los datos transmitidos
consiste
en utilizar mecanismos de cifrado. El propósito de WEP es garantizar que los
sistemas
WLAN dispongan de un nivel de confidencialidad equivalente al de las redes LAN
cableadas, mediante el cifrado de los datos que son transportados por las señales
de radio.
2.3.2.6.1.1. Cifrado
WEP utiliza una clave secreta compartida entre una estación inalámbrica y un
punto
de acceso. Todos los datos enviados y recibidos entre la estación y el punto de
acceso
pueden ser cifrados utilizando esta clave compartida. El estándar 802.11 no
especifica
cómo se establece la clave secreta, pero permite que haya una tabla que asocie una
clave
exclusiva con cada estación. En la práctica general, sin embargo, una misma clave
es
compartida entre todas las estaciones y puntos de acceso de un sistema dado.
2.3.2.6.1.2. Autenticación
un sistema WLAN pueden tener la misma clave compartida, dependiendo de cómo se haya
instalado el sistema. En tales redes, no es posible realizar una autenticación
individualizada; todos los usuarios, incluyendo los no autorizados, que dispongan
de la
clave compartida podrán acceder a la red. Esta debilidad puede tener como resultado
accesos no autorizados, especialmente si el sistema incluye un gran número de
usuarios.
Cuantos más usuarios haya, mayor será la probabilidad de que la clave compartida
pueda
caer en manos inadecuadas.
2.3.2.6.1.3. Características
2.3.2.6.1.4 Algoritmos
• Se calcula la O exclusiva (XOR) de los caracteres del punto 1 con los del
punto 3.
El resultado es el mensaje cifrado.
64 bits
IV RC4
Shared Key
Zona cifrada
RC4
Clave PRNG
RC4
Clave PRNG
Si se han capturado varias tramas con igual IV, es decir, con igual
keystream, solo
se necesita conocer el mensaje sin cifrar de una de ellas, haciendo el XOR entre un
mensaje
sin cifrar y el mismo cifrado, nos dará el keystream para ese IV. Conociendo el
keystream
asociado a un IV, se puede descifrar todas las tramas que usen el mismo IV. El
problema es
entonces conocer un mensaje sin cifrar, aunque esto no es tan complicado, porque
existen
tráficos predecibles o bien, se pueden provocar (mensajes ICMP de solicitud y
respuesta de
eco, confirmaciones de TCP, etc.).
2.3.2.6.1.5.2. Sniffing
• La antena es preferible que sea de Wireless LAN, pero pruebas con sistemas
metálicos sencillos también han permitido practicar sniffing a distancias
cortas.
• Hay tarjetas y drivers preparados para monitorear la red, son de alto costo.
• Con tarjetas de bajo costo sobre Linux se pueden hacer modificaciones para
captar
todo el tráfico.
M1 + S = C1
IV
S
RC4
K
M2 + S = C2
C1 + C2 = M1 + M2
Fluhrer, Mantin y Shamir descubrieron en agosto del 2001 una debilidad del
RC4.
Se utiliza únicamente el primer byte generado por la secuencia pseudoaleatoria con
el
objetivo de obtener la clave de encriptación. También en agosto del 2001,
Stubblefield,
Ioannidis y Rubin implementaron un sistema práctico y barato para conseguir la
clave con
la vulnerabilidad del RC4. Consiguieron la clave en 2 tipos de experimentos con:
Como resultado tenemos una expansión del ancho de banda original y una
ganancia
de proceso de 10.4 dB.
Para que una red Inalámbrica se considere segura, debe contar con la
existencia de
mecanismos de autentificación en doble vía, es decir el usuario debe verificar que
se está
conectando a la red correcta y a su vez la red debe constatar que el usuario está
autorizado y
en segundo lugar la data debe viajar cifrada por el aire para evitar escuchas
pasivas. Cada
método logra un nivel diferente de seguridad, es decir cada uno de ellos presenta
ventajas y
desventajas, entre ellos se encuentran:
Una red privada virtual (VPN) es la que emplea tecnologías de cifrado para
crear un
canal virtual privado sobre una red de uso público. Las VPN resultan especialmente
atractivas para proteger redes inalámbricas, debido a que funcionan sobre cualquier
tipo de
hardware inalámbrico y superan las limitaciones que tiene WEP. Para configurar una
red
inalámbrica utilizando las VPN, debe comenzarse por asumir que la red inalámbrica
es
insegura. Esto quiere decir que la parte de la red que maneja el acceso inalámbrico
debe
estar aislada del resto de la red, mediante el uso de una lista de acceso adecuada
en un
enrrutador, o agrupando todos los puertos de acceso inalámbrico en una VLAN si se
emplea switching. Dicha lista de acceso y/o VLAN solamente debe permitir el acceso
del
cliente inalámbrico a los servidores de autorización y autenticación de la VPN.
Deberá
permitirse acceso completo al cliente, sólo cuando éste ha sido debidamente
autorizado y
autenticado. En la Figura 2.28 se muestra una estructura de VPN para tener el
acceso
inalámbrico de manera segura donde se encuentra un servidor de autorización,
96
2.3.1.4. 802.1X
esta clave dinámica periódicamente (por ejemplo cada cinco minutos), para evitar el
ataque
de rompimiento de la clave descrito anteriormente en la sección referente a WEP.
2.3.1.5.1. EAP-TLS
2.3.1.5.2. EAP-TTLS
2.3.1.5.3. PEAP
2.3.1.6.1. EAP-MD5
2.3.1.6.2. LEAP
2.3.1.6.3. EAP-SPEKE
Modalidad de red casera, o PSK (Pre-Shared Key): WPA opera en esta modalidad
cuando no se dispone de un servidor de RADIUS en la red. Se requiere entonces
introducir
una contraseña compartida en el punto de acceso y en los dispositivos móviles cuya
contraseña coincida con la del punto de acceso. Una vez logrado el acceso, TKIP
entra en
funcionamiento para garantizar la seguridad del acceso. Se recomienda que las
contraseñas
empleadas sean largas (20 o mas caracteres), porque ya se ha comprobado que WPA es
vulnerable a ataques de diccionario, si se utiliza una contraseña corta.
2.3.4. Tecnologías V5
Un interfaz V5.1 está formado por sólo un enlace E1, cuyos slots de tiempo
están
estáticamente asignados a los puertos de usuario PSTN y RDSI, por lo que este tipo
de
interfaz no soporta concentración. En cambio, un interfaz V5.2 puede llegar a estar
formado
por un máximo de 16 enlaces E1. El número de enlaces del V5.2 es configurado por el
operador de red. En un interfaz V5.2 los slots de tiempo se asignan dinámicamente
llamada
a llamada.
2.3.3.1. Protocolos de V5
Estos protocolos son los cinco que forman la suite de protocolos V5.2. El
V5.1 sólo
tiene los dos últimos, el PSTN y el Control Protocol. Los números entre paréntesis
indican
el identificador de datalink (EF) en cada paquete visto en un analizador de
protocolos V5.
Este analizador de protocolos se puede utilizar para monitorizar los mensajes V5 en
los dos
timeslots 16 de un V5.
106
En el caso del V5.2, los mensajes del Control Protocol, el Link Control
Protocol, el
BCC Protocol y, si se configura (normalmente sí, PG1), el Protection Protocol, se
transmiten siempre juntos por el timeslot 16 del E1 configurado como activo
(normalmente
el primario). Los otros protocolos pueden asignarse a los timeslots 15, 16 o 31 de
cualquiera de los otros E1 que componen el interfaz V5.2. El timeslot 16 del E1
secundario
también transporta mensajes del Protection Protocol y se reserva como C-Channel de
respaldo para el timeslot 16 del E1 con el C-Channel activo.
2.3.3.2. Funcionamiento de V5
Las normas ITU-T: G.964 (V5.1), G.965 (V5.2) y los estándares ETSI: ETS 300
324-1 y ETS 300 324-2 para V5.1 y ETS 300 347-1 (V5.2), agrupan toda información
detallada de los protocolos V5. [9]
108
CAPÍTULO III
Parcela 20
Parcela
22
Parcela 23
Los edificios que componen estas parcelas tienen cada uno 5 pisos
(incluyendo la
planta baja) y cuenta cada piso con 6 apartamentos de 54 m2, lo cual representa un
total 450
apartamentos en cuestión para el desarrollo del proyecto piloto.
110
• CANTV Listo o Habla Ya, similar al CANTV Fijo con la diferencia de que se
ofrece en aquellas localidades o zonas geográficas donde no existe
factibilidad de
líneas fijas CANTV, los números telefónicos utilizan código de área local y
poseen
servicios de valor agregado tales como servicio de identificador de llamadas
y
suscripción al servicio de mensajería de texto, todo esto mediante el uso de
terminales inalámbricos ajustados a la norma ITU IS-2000 a través de la Red
CDMA 1xRTT de Movilnet, donde el servicio esta restringido geográficamente a
la
dirección de instalación suministrada por el cliente .
• CANTV ABA, es un servicio de acceso a banda ancha que funciona sobre una
tecnología de Línea de Abonado Digital Asimétrica (ADSL) en modalidad de
postpago con cargo directo a la factura telefónica, que permite a CANTV
aprovechar la infraestructura sobre la que actualmente funciona el
servicio
telefónico (Pares de cobre), para ofrecer acceso a Internet a
velocidades bastante
superiores a las de acceso discado. En la Figura 3.3, se muestra el
esquema de la
red ABA de CANTV.
CANTV
Cliente
Internet
Router DSLAM
PC
Firewall
Par de Cobre
Spliter Filtro
PSTN Switch
Teléfono
INTERNET
INTERNACIONAL
NAT
NACIONAL
PDSNs
EVDO RNC
Cluster 1
ATM Backbone
Cluster 4
Cluster 2
Cluster 3
Intercable
Cliente
Red HFC
Receptores
Spliter
Set Top Box
Tv Broadcast
Codificadores Moduladores y
Transmisores
Televisor
Para las Parcelas 20, 22 y 23, se tiene una tanquilla común, como se muestra
en la
Figura 3.6, que permite el acceso la interconexión al anillo del equipo
concentrador de
abonados.
La sección secundaria, que esta conformada por el cableado sale desde las
regletas
de conexión secundaria del concentrador, el tendido aéreo sobre los postes
telefónicos (se
utilizan dos cables troncales y mangas de empalme), lo cual permite interconectar
el equipo
concentrador de abonados hasta los 15 edificios donde respectivamente esta
instalado el
cajetín terminal de CANTV, como se detalla en las Figuras 3.7 y 3.8.
CAPÍTULO IV
LA RED DE MOVISTAR
• Costo Efectivo.
• Flexibilidad de las Aplicaciones.
• Características de Desarrollo e Integración.
• Presencia en el Mercado Local.
• Tiempo de entrega.
• Relación Comercial con Movistar.
• Posicionamiento en los mercados internacionales.
• Posibilidad de compra y garantía.
• Servicios de soporte.
En la Tabla 4.1 se encuentran los productos evaluados para DLC y ADSL con su
proveedor respectivo.
CAPÍTULO V
Las tarifas que se aplicarán para el servicio de voz serán las mismas que se
utilizan hoy en día para la telefonía fija residencial o comercial CDMA, e
igualmente
para el caso del servicio ADSL, las tarifas y planes de Internet banda ancha serán
iguales
a las aplicadas actualmente en la red WLL.
Para entender mejor esta idea, se muestra la gráfica de la Figura 5.1, donde
para la
transmisión de voz desde el DLC hasta la central se utiliza el protocolo V5.2 y
para el
transporte de los datos se emplean E1s G.703. Cabe señalar, que no es posible
utilizar un
mismo E1 para transportar voz y datos simultáneamente.
V5.2 E1 V5.2
DLC
E1 G.703
E1 G.703
ADSL
Convertidor Cable
FE-E1 multipar
FE nivel 3
Cableado
FXB del
Router
edificio
BRAS
Par de
cobre
Gestor
ADSL
MODEM
CORE IP /
ADSL
Internet
• Línea de vista con alguna estación o radio base Movistar, para el enlace
microondas de última milla.
• Presencia de toma eléctrica AC y barra de tierra o ductería para pasar el
cableado
de tierra hacia la barra.
Ubicación de la
Sala de Equipos
AWG
Canalización
Circuitos VAC Interruptores
Calibre
Alumbrado Interno 110 1 20 A 2 x 12
½”
Alumbrado Externo 110 1 20 A 2 x 12
½”
Tomacorrientes TUG 110 4 20 A 2 x 12
½”
Tomacorrientes TUG 220 4 30 A 3 x 10
¾”
Balizaje de la Torre 110 1 20 A 3 x 12
½”
Aire Acondicionado 220 1 30 A 3 x 10
¾”
“Ciudad Casarapa"
“Estación Aguacates”
Latitud 10º 27’ 50.36” N y Longitud 66º 35’. 32.73” W. Una vez introducidos los
datos
de coordenadas en el Módulo “Terrain Data” del Programa “PathLoss”, fue generado un
perfil topográfico mostrado en la Figura 5.7, tomando como fuente de entrada
directa los
datos de elevación y distancia de las tablas de digitalización de mapas
topográficos
cargados en las base de datos del sistema.
1200
1100
1000
900
Elevation (m)
800
700
600
500
400
300
0 0.5 1.0 1.5 2.0 2.5
3.0 3.5 4.0 4.5 5.0 5.5
Path length
(5.72 km)
Aguacates Frequency (MHz) =
13000.0 Ciudad Casarapa
Latitude 10 24 47.00 N K = 0.78,
1.33 Latitude 10 27 50.36 N
Longitude 066 36 05.00 W %F1 = 60.00,
100.00 Longitude 066 35 32.73 W
Azimuth 9.88°
Azimuth 189.88°
Elevation 1080 m ASL
Elevation 371 m ASL
Antenna CL 20.0 m AGL
Antenna CL 20.0 m AGL
Mar 14 06
o Regleta telefónica KRONE (10 pares): Estas regletas forman parte del
sistema EDA, ya que en las mismas se conectan los pares de cobre
provenientes de las regletas 110 y a la vez se “insertan” los módulos o
137
• Regleta Espejo – Voz: A esta regleta intermedia llegan los pares de cobre
(cable multipar) provenientes del filtro del DSLAM. En esta regleta se
tienen pares de cobre que transportan solamente el servicio de voz.
Regleta voz
y datos
I F S F
Hacia clientes
P I W E
-
con voz y datos
L I /
D
T T E
S
R C 1 Regleta espejo
- voz
L
A O H
M
LAN LAN
Conexión de
Regleta DLC
Hacia Balum / Radio
importante señalar que para la conexión del sistema de ADSL, se necesita instalar
del
lado MTSO un convertidor FastEthernet - E1, el cual toma la señal del E1 G.703
proveniente del sitio remoto y la convierte nuevamente a FastEthernet, para
conectarla al
Router BRAS del CORE-IP.
suscriptor, una regleta de voz y datos, una regleta espejo–voz y una regleta DLC.
Para
450 suscriptores se requiere una cantidad total de 1350 pares disponibles, para
esto es
necesario realizar la instalación de siete (7) shelves de o bandejas preensambladas
de
18,44” equipadas con 200 regletas Krone, lo cual representa 1400 pares disponibles.
Shelves de
Regletas Krone
Rack de
19”
El sistema de DLC “Alcatel Litespan 1540”, esta compuesto por 4 shelves que
pueden alojar hasta diez (10) tarjetas de 32 puertos para POTS que permiten
instalar
hasta 2556 POTS interconectados con un máximo de quince (15) E1´s (G.703) hasta la
central de conmutación. Para este diseño es necesario realizar la instalación de
dos (2)
shelves equipados con 15 tarjetas POTS, lo cual representa 480 POTS disponibles
median el uso de siete (7) E1’s desde la urbanización Ciudad Casarapa hasta el
MTSO-
Colgate.
Sistema Consumo
DLC Alcatel Litespan 188 w
ADSL EDA 455 w*
Radio Nera FlexLink 46 w
Total 689 w
* Potencia total del proyecto basado en un consumo de 65 w por siete (7) IP-
DSLAM
CAPÍTULO VI
o Transformadores.
o Hornos de microondas.
Zona de Cobertura CH 11
Debemos tener en cuenta que a medida que se esta más lejos del AP, la
velocidad
disminuye, sin embargo, se tiene al principio una velocidad de 11 Mbps y esta va
disminuyendo a 1 Mbps, dicha velocidad todavía es mejor que un enlace DSL o Dial-
Up,
así que, si el usuario solo esta revisando E-mail o navegando en Internet el
desempeño
sería satisfactorio.
Cada Cliente debe tener una tarjeta PCI o PCMCIA conectado en su computadora
de escritorio o portátil, según sea el caso. Si hay problemas con la señal, también
podemos instalar un adaptador de red inalámbrica que tenga conector para antena
externa.
AP BASE
WEP2
EAP
EAP-TTLS
LEAP
RADIUS
EAP-TLS
TKIP
802.1X
VPN 802.11i
AES
• Costo.
• Asistencia.
• Tiempo de entrega.
6.2.1. D-Link
Prestaciones
Instalación y Uso:
Administración:
Seguridad:
6.2.3. Cisco
Los equipos Cisco son distribuidos en Venezuela por Cisco Systems Venezuela.
De éste proveedor fueron evaluados los puntos de acceso / puentes “outdoor” de la
serie
Cisco Aironet 1300, las tarjetas PCI para computadores de mesa Cisco Aironet
802.11a/b/g Wireless PCI Adapter y los adaptadores para portátiles Cisco Aironet
802.11a/b/g Wireless Cardbus Adapter. A continuación se detallan las
características
generales que ofrece dicha solución:
Prestaciones:
Instalación y Uso:
Administración:
El WLSE, como componente del Cisco SWAN, está disponible como herramienta
de gestión para la serie 1300. Posee una interfaz de gestión basada en HTML. Usa
SNMP
y Secure Shell (SSH)/Secure Sockets Layer (SSL) para gestionar los puntos de
accesos y
puentes de la serie 1300 a través de una interfaz web.
La serie Cisco Aironet 1300 Series soporta los estándares 802.11b y 802.11g,
proporcionando tasas de transferencia de hasta 54 Mbps con una tecnología fiable y
segura. Certificado Wi-Fi.
Seguridad:
PEAP, TKIP
Cumplimiento de normas ETSI, VCCI, EN 60950, ICES-003, IEC
60950,
UL 60950, CSA 22.2 No. 60950, EN
301.489.1,
EN 301.489.17, AS/NZ 3548 Class B,
TELEC
33a, TELEC Std 66, RSS-210, RSS-102
Software incluido Controladores y utilidades
Sistema operativo requerido Microsoft Windows 2000 / XP
Servicio y mantenimiento 1 año de garantía
Detalles de Servicio y Mantenimiento Garantía limitada - 1 año
Temperatura mínima de funcionamiento 0 °C
Temperatura máxima de funcionamiento 70 °C
Ámbito de humedad de funcionamiento 10 - 90%
6.2.4. Aphelion
Prestaciones:
Instalación y Uso:
Administración:
Seguridad:
Soporta cliente y servidor Radius, seguridad WPA con TKIP/AES, WEP hasta
152 bits, tipo de autentificación: sistema abierto / clave compartida, filtrado de
MAC.
Equipos
Punto de Acceso
DWL-2700AP 600AG Aironet 1300
Outdoor
Adaptador PC
Aironet Wireless PC
Card (para DWL-AG660 10G
Card
portátil)
Adaptador PCI Aironet Wireless PCI
DWL-G120 No dispone
(para desktop) Card
Radio Frecuencia
Banda ISM 2.4-2.4835 GHz ISM 2.4-2.4835 GHz ISM 2.4-2.497 GHz
Codificación DSS DSS DSS
Técnica de DBPSK@1Mbps DBPSK@1Mbps DBPSK@1Mbps
Modulación DQPSK@2Mbps DQPSK@2Mbps DQPSK@2Mbps
CCK@5.5 y 11Mbps CCK@5.5 y 11Mbps CCK@5.5 y 11Mbps
Tasa de
Transferencia
Ajuste Dinámico 11Mbps, 5.5Mbps, 11Mbps, 5.5Mbps, 11Mbps, 5.5Mbps,
2Mbps, 1Mbps 2Mbps, 1Mbps 2Mbps, 1Mbps
Modo de
Half Duplex Half Duplex Half Duplex
Transmisión
Acceso al Medio CSMA/CA CSMA/CA CSMA/CA
Modos de
Operación (AP)
Punto a Punto Si Si Si
Infraestructura Si Si Si
64-, 128-, 152-bit 64-, 128-, 152-bit 128-bit WEP en modo
Encriptación
WEP WEP Bridge
Open System / Shared
Autenticación IEEE 802.1x IEEE 802.1x
Key
Software
FCC Clase B Si Si Si
Marca CE Si Si Si
UL Si No Si
CSA Si No Si
Garantía Si Si Si
Sistemas
Operativos
Windows 95/98/98SE/200/
No Especifica No Especifica
ME/NT/XP/CE
176
La solución escogida fue la presentada por Cisco por las siguientes razones:
(1)
180
Ahora, para una antena receptora se tiene que la recepción isotrópica es:
(2)
(3)
(4)
(5)
Es común encontrar la expresión (5) en forma tal que pueda ser trabajada con
otras unidades, como kilómetros, pies, millas, o Megahertz. Simplemente se trabajan
los
factores de conversión adecuadamente, y sumando las constantes que aparecen al
realizar
esa operación. Para ilustrar esto último, se tienen por ejemplo las siguientes
fórmulas:
181
(6)
(7)
(8)
(9)
182
20
5
5.2
69.64
0
0
-90
-49,44dBm, por lo que el Margen de Operación del Sistema será de 40.56 dB.
• Power Injector
• Conectores RJ-45
• Postes de 20 metros
CONCLUSIONES Y RECOMENDACIONES
Conclusiones
Recomendaciones
• Es importante que todos los cables estén conectados debidamente y seguros antes
del
encendido del sistema, para esto se recomienda que durante el proceso de
implementación del proyecto, específicamente en las actividades de instalación,
cumplir con las normas ISO/IEC 11801 para Cableado Genérico en Instalaciones de
Usuario, ANSI/TIA/EIA 569-A para Canaletas y Espacios, ANSI/TIA/EIA 758 para
Cableado de Planta Externa y ANSI/TIA/EIA 607 para Apantallamiento y Puesta a
Tierra.
REFERENCIAS
[2] Van Bosse, J. (1998) Signaling in Telecommunications Networks. 549 p.p. Wisley-
Interscience. Canada.
[15] Dayem, Rifaat A. (1997). Mobile Data & Wireless LAN Technologies. Prentice
Hall. USA.
[18] Henner, I. y Per T. (1999) Planning of line of sight radio relay systems.193
p.p. Nera
Telecommunications. Bergen.
[20] International Telecommunication Union. (Sin Fecha) Rain zone contour maps
Recommendation G.837-1. 6 p.p.
190
[26] Universidad Católica Andrés Bello. (Sin Fecha) Ejemplos de las Normas APA.
[Homepage]. Consultado el día 2 de abril del 2005 de la World Wide Web:
http://academia.ucab.edu.ve/paginas/mostrar.php?id_link=2844&id_materia=458
iii
GLOSARIO
• Actualizar
Sustituir el software o firmware existente con una versión más moderna.
• Ad Hoc: Una WLAN bajo topología "Ad Hoc" consiste en un grupo de equipos que
se comunican cada uno directamente con los otros a través de las señales de
radio sin
usar un punto de acceso. Comunicaciones de tipo punto-a-punto. Los equipos
inalámbricos necesitan configurar el mismo canal y SSID en modo "Ad Hoc".
• BER: (Bit Error Rate). Tasa de error de bit. Constituye una medida de la
calidad de
la transmisión digital.
compensar los efectos negativos del canal y adaptar el formato de la misma para
que
su transmisión por dicho canal sea lo más eficiente posible.
• Congestión: Situación que acontece en una red cuando ésta resulta incapaz de
aceptar más información. Suele ocurrir cuando las colas de los routers de la
red se
saturan.
• CTS (Limpiar para enviar): Señal enviada por un dispositivo para indicar que
está
preparado para recibir datos.
• Dirección IP: un número único de 32 bits para una máquina TCP/IP concreta en
Internet, escrita normalmente en decimal (por ejemplo, 192.168.1.1).
• E1: Conexión por medio de la línea telefónica que puede transportar datos con
una
velocidad de hasta 1,920 Mbps. Según el estándar europeo (ITU), un E1 está
formado
por 30 canales de 64 kbps. E1 es la versión europea de T1 (DS-1). Velocidades
disponibles:
E1: 30 canales, 2.048
Mbps
E2: 120 canales, 8.448
Mbps
E3: 480 canales, 34.368
Mbps
E4: 1920 canales, 139.264
Mbps
E5: 7680 canales, 565.148 Mbps
• Eco: (Echo). Porción de la señal transmitida que vuelve al emisor junto con la
señal
del otro extremo o en ausencia de ella.
• Eco eléctrico: Fenómeno producido por las reflexiones que sufre la señal en el
extremo receptor debido a una desadaptación de impedancias.
• Enrutador: Dispositivo de red que conecta redes múltiples, tales como una red
local
e Internet.
• Enrutamiento estático: Reenvío de datos de una red a través de una ruta fija.
• ERL: (Eco Return Loss). Pérdidas de retorno que sufre la señal de eco y que
aseguran que su nivel no sobrepasa un cierto límite.
• Finger: Programa que le facilita el nombre asociado con una dirección de correo
electrónico.
• Frase secreta: Se utiliza con mucha frecuencia como una contraseña, ya que una
frase secreta simplifica el proceso de cifrado WEP generando de forma
automática
las claves del cifrado WEP para los productos Linksys.
• G.728: Codec de audio LD-CELP a 16 kbps. Se caracteriza por una calidad media
de
la voz, consumo de ancho de banda media y alta carga del procesador mínima
debida
a la compresión.
• G.729: Codec de audio CELP a 8 kbps. Se caracteriza por una calidad media de la
voz, consumo bajo ancho de banda y alta carga del procesador.
• Hot Spot: Punto de Acceso generalmente localizado en lugares con gran tráfico
de
público (estaciones, aeropuertos, hoteles) que proporciona servicios de red
inalámbrica de banda ancha a visitantes móviles.
• LAN - (Local Area Network): Red de comunicaciones que cubre un área limitada de
aproximadamente seis millas (9,6 Km) de radio, con velocidades de transferencia
de
datos que van de moderadas a altas. Los computadores que se encuentran dentro
de
una red LAN, deben estas in el mismo edificio, o en un edificio próximo al
mismo.
• MIMO: Multiple Input Multiple Output. Tecnología que simula el uso de varias
antenas en nuestro dispositivo. Es compatible con cualquier dispositivo
802.11b/g y
permite trabajar con cada uno a la máxima velocidad que soporte.
• MCU: (Multipoint Control Unit). Punto final que soporta tres o más terminales y
pasarelas en una única conferencia multipunto.
• Puente (Bridge): Dispositivo que conecta dos tipos diferentes de redes locales,
como
por ejemplo una red inalámbrica a una red Ethernet con cable.
• Red Troncal: Parte de una red que conecta la mayoría de los sistemas y los une
en
red, así como controla la mayoría de datos.
• Servidor: Cualquier equipo cuya función en una red sea proporcionar acceso al
usuario a archivos, impresión, comunicaciones y otros servicios.
204
• SS7: (Common Channel Signaling System Nº 7). SS7 es un estándar global para
telecomunicaciones definido por la Unión Internacional de Telecomunicaciones
(Sector de Estandarización de Telecomunicaciones). Define los procedimientos y
protocolos mediante los cuales los elementos de la Red Telefónica Conmutada
(RTC
o PSTN, Public Switched Telephone Network) intercambian información sobre una
red de señalización digital para establecer, enrrutar, facturar y controlar
llamadas,
tanto a terminales fijos como móviles.
• T1: Un circuito digital punto a punto dedicado a 1.544 Mbps proporcionado por
las
compañías telefónicas en Norteamérica. Ver E1 y J1 para los equivalentes
europeos y
japonés, respectivamente. Permite la transmisión de voz y datos y en muchos
casos se
utilizan para proporcionar conexiones a Internet.
205
• VLAN - Virtual Local Area Network: Red de Área Local Virtual. Tipo de red que
aparentemente parece ser una pequeña red de área local (LAN) cuando en realidad
es
una construcción lógica que permite la conectividad con diferentes paquetes de
software. Sus usuarios pueden ser locales o estar distribuidos en diversos
lugares.
• VoIP: (Voice Over IP). Tecnología que permite la transmisión de la voz a través
de
redes IP, Internet normalmente. La Telefonía IP es una aplicación inmediata de
esta
tecnología.
• VPN (Red privada virtual): Medida de seguridad para proteger los datos a medida
que abandona una red y pasa otra a través de Internet.
• WAN: (Wide Area Network). Una red de comunicaciones utilizada para conectar
ordenadores y otros dispositivos a gran escala. Las conexiones pueden ser
privadas o
públicas.
• WPA-Enterprise: Versión de WPA que utiliza las mismas claves dinámicas que
WPA-Personal y también requiere que todo dispositivo inalámbrico esté
autorizado
según lista maestra, albergada en un servidor de autenticación especial.
ANEXOS
Alcatel 1540 Litespan
A Multitude of Possibilities in
One Multiservice Access Platform
The Alcatel 1540 Litespan family is a multiservice access-network platform that
offers cost-effective narrowband,
broadband and voice over IP (VoIP) services for residential and business
applications. This multivendor-compatible
With the Alcatel 1540 Litespan family, service providers can offer any mixture of
revenue-generating services and can
objectives. The Alcatel 1540 Litespan family integrates with other products in the
Alcatel Open Path to Enhanced
A L C AT E L 1 >
ALCATEL’S MULTISERVICE ACCESS
NETWORK SOLUTION
The Alcatel 1540 Litespan family is a central
Outstanding Multiservice Gateway
element in Alcatel's next generation networking The
Alcatel 1540 Litespan family is based on an
(NGN) product portfolio, serving as a multiser-
outstanding multiservice access gateway platform
vice access-based media gateway and offering: that
offers a unified, flexible, integrated architec-
> Support for any mix of services to rural or ture
for a wide variety of network implementations.
urban residential users, small offices/home
offices (SOHOs), small/medium enterprises
Integrated Management
(SMEs) and large corporations In
addition to the multiservice gateway platform,
> Support for multiple topologies the
family includes the integrated Alcatel 1353
(star, tree, point-to-point, ring, and mixed) LMS.
Both the Alcatel 1540 Litespan Multiservice
> Readiness for backbone evolution to IP Access
Gateway (Alcatel 1540 Litespan) and the
> Support for a variety of technologies,
Alcatel 1353 LMS are integrated and tested with
including TDM, synchronous digital hierarchy other
Alcatel products to ensure end-to-end NGN
(SDH), ATM, IP and Ethernet
solutions.
Video
Internet Ethernet Ethernet
ATM or IP
Edge
Networks
Data 1540
Litespan
Local
ADM
Exchange
n x E1
(Optical Fiber/
HDSL/SHDSL)
SDH
Ring
LEX (STM-
1/STM-4)
Business
ADM
1540 Litespan 1540 Litespan
n x E1
n x E1
1540 Litespan SDH
DLC PDH DLC
(Optical Fiber/
Exchange Unit
Residential and
Business
HDSL/SHDSL)
Business
Leased
Line
Transport
1540 Litespan
Network PDH DLC
PDH DLC Residential
Remote Unit
> 2 A L C AT E L
THE ALCATEL 1540 LITESPAN FAMILY has taken a leading position
as an access network solution. A September 2004 study by RHK Inc.
reported that the Alcatel 1540 Litespan is the leader in the ETSI digital
loop carriers (DLC) market (29 percent). The Alcatel 1540 family is
in operation in more than 30 countries worldwide. More than 14.5
million equivalent lines have already been delivered — plain old
telephone system (POTS), integrated services digital network (ISDN),
leased lines and digital subscriber line (DSL).
Huawei
Alcatel
27%
29%
Lucent
11%
Others
9%
UTStarcom
Marconi
4% AFC
9%
Siemens
4% 7%
A L C AT E L 3 >
WHAT THE ALCATEL 1540
LITESPAN FAMILY OFFERS
The Alcatel 1540 Multiservice Capabilities for
Support of Multiple Transport
Litespan implements Increased Revenue Generation
Options for Easy Integration
key state-of-the-art The flexible, multiservice capabilities of the with
Existing Networks
technologies in Alcatel 1540 Litespan solution expand the service The
Alcatel 1540 Litespan integrates plesiochro-
addition to TDM, provider’s revenue-generating capability. In nous
digital hierarchy (PDH) or SDH transport
including any DSL addition to providing basic narrowband voice
mechanisms for switching and data networks. An
(xDSL), packetized VoIP and data services (using POTS, ISDN, basic SDH
add-drop multiplexer (ADM) is integrated in
and Ethernet access/primary rate access, digital leased lines), just
one board. Ethernet, PDH and ATM transport
connectivity, all key the system delivers broadband Internet access,
capabilities are also available. Traffic is transpor-
technological trends data and multimedia capabilities over ted
between Alcatel 1540 Litespan exchange units
today. asymmetrical digital subscriber line (ADSL,
(EUs) and remote units (RUs) through copper
ADSL2 or ADSL2+) or global standard high-
lines (using HDSL or g.SHDSL transport protocols),
speed DSL (g.SHDSL) to enable quicker Internet
fiber connections or external leased-line networks.
surfing, data transmission and video applications
for end users. Alcatel’s 1540 Litespan represents
Broadband (xDSL) traffic is routed through syn-
the perfect triple-play solution for many types of
chronous transport module 1 (STM-1) optical or
access network scenarios.
E3/DS3 electrical interfaces to the ATM backbone.
In
addition, xDSL traffic is redirected to the
Support of Multiple Topologies
backbone (typically IP) through an Ethernet port
for More Flexible Applications
(10/100Base-T or optical 100 FX). This increases
Star, ring, tree, point-to-point and mixed
flexibility when connecting to the IP data
topologies are all supported.
backbone through Metro Ethernet networks.
> 4 A L C AT E L
Open Interfaces for Multivendor
Compatibility, Competitive Pricing
and Investment Protection
The Alcatel 1540 Litespan family is designed with
standard interfaces (V5 for TDM voice services,
Megaco/H.248 for VoIP and ATM or Ethernet for
xDSL traffic) to ensure that it functions effectively
in open environments. This open design enables
service providers to build competitive, customized
solutions that are compatible with their existing
investments and their customers’ needs.
A L C AT E L 5 >
Lower CAPEX and OPEX
Future-Ready and Safe
and Increased Revenues
Investment Evolution to NGN
Because the Alcatel 1540 Litespan family provides The
Alcatel 1540 Litespan is designed to be NGN
so many services on a single platform, it can ready,
able to convert smoothly from a multi-
significantly affect overall revenues. Its flexible
service access platform supporting today’s TDM
design ensures that new services can be added
services to a full access media gateway in NGN.
easily as user demand requires them.
Through the simple insertion of a VoIP gateway
card,
the node is transformed into an NGN access
The Alcatel 1540 Litespan significantly lowers
gateway that supports VoIP services with minimal
capital expenditure (CAPEX) and OPEX by: future
investment. The operator chooses which
> Starting fiber at the most economical point
customers remain connected to the legacy TDM
> Using standard interfaces
backbone and which migrate to the new NGN
> Interconnecting Ethernet, ATM, public
backbone.
switched telephone network (PSTN)/ISDN,
leased lines, TDM, etc., in a single node
> Supporting flexible topologies in a single
system
> Including open interfaces for multivendor
interworking
> Providing integrated network management
> 6 A L C AT E L
SUMMARY OF FEATURES
Tables 1 and 2 provide a summary of the most important features available in the
Alcatel 1540 Litespan and Alcatel 1353 LMS.
TABLE 1 - ALCATEL 1540 LITESPAN
Feature Description
Multiples Virtual Circuit (VC) allocation by end-user • Using Alcatel 1540 ADSL
boards, several VCs established between ADSL port and end-user router
• Each VC devoted to
particular broadband service: HSIA, video and VoIP
• Ensures each service
remains discrete and does not degrade the quality of another service
Out-band and in-band interfaces for the DCN • DCN between Alcatel 1540
Litespan and Alcatel 1353 DN applications connected either through
in-band channel or by
out-band Ethernet interface at 1540 Litespan side
A L C AT E L 7 >
ALCATEL 1353 LITESPAN
MANAGEMENT SYSTEM
The use of a consistent The Alcatel 1353 LMS includes several management
applications for
management approach services delivered on the Alcatel 1540 Litespan platform:
shortens the learning > Alcatel 1353 Distributed Network (DN): Element manager
for voice and
curve by giving oper- leased line data services. The Alcatel 1353 DN is based
on the Alcatel
ators a common look Management Platform (ALMAP). The use of common system
and feel. management functions provides an integrated
Telecommunications
Management Network (TMN) architecture that gives
operators a
common look and feel across ALMAP-based applications.
> Alcatel 1353 SDH transport network (SH): Element
manager for the
optional integrated ADM (for SDH services)
• Alcatel 1353 Gateway (GW): Application layered on
the Alcatel 1353
DN and Alcatel 1353 SH to interface with third-
party operational
support systems (OSSs)
> Alcatel 1355 DN: Subscriber manager for voice services
• Alcatel 1355 GW: Gateway application layered on the
Alcatel 1355 DN
to interface with third-party OSSs
> Alcatel 5523 AWS: Element manager for xDSL (broadband)
services
> 8 A L C AT E L
THE ALCATEL ADVANTAGE
Alcatel provides The Alcatel 1540 Litespan is enhanced by
Alcatel has a massive installed base of more than
end-to-end communi- Alcatel’s long-term leadership in:
314 million lines that can be leveraged with the
cations solutions, > DSL and DLC segments
Alcatel 1540 Litespan. The Alcatel 1540 Litespan
enabling carriers, > Voice switching
incorporates technology from the Alcatel 7300
service providers and > Intelligent networks
Advanced Services Access Manager (ASAM)
enterprises to deliver > Terrestrial and submarine transmission
family, which represents the largest installed base
content to any type
of DSL worldwide. The Alcatel 1540 Litespan also
of user, anywhere Furthermore, Alcatel’s expertise in applications
incorporates technology from the Alcatel SDH
in the world. and network services enables our customers to
transmission family of products, representing the
focus on optimizing their service offerings and
largest installed base of SDH equipment in the
revenue streams.
world. Alcatel has the largest geographical
Alcatel 5020 family of Softswitches with Media Gateway Controller > Provides
call control, local telephony services and multimedia
and Call Session Controller applications
> Interfaces
with the SS7 network
> Platforms
centrally located in the service provider’s network
A L C AT E L 9 >
Alcatel and the Alcatel logo are registered trademarks of Alcatel. All other
trademarks
are the property of their respective owners. Alcatel assumes no responsibility for
the
accuracy of the information presented, which is subject to change without notice.
© 04 2005 Alcatel. All rights reserved. 3CL 00469 0532 TQZZA Ed.03 18986
A smarter approach
to cellular access
solutions...
Nera FlexLink
A smarter approach to wireless access solutions.
Flexibility and reliability are important features in our search for
wireless solutions excellence. Flexibility comes along with
innovation. Reliability is enabling rapidly built networks which meet
the need for coverage, capacity and functionality from day one.
That’s Nera’s definition of a smarter approach to wireless access
solutions. The FlexLink is a low and medium capacity microwave
access solution covering from 2x2 to 16x2 Mbit/s capacity, in the
7, 8, 13, 15, 18, 23, 26, 28, 32 and 38 GHz frequency bands.
network elements
Nera Element vieW – Network
Management System (NEW NMS) Client/Server Solutions for NT
4.0/WIN2000 As above for multiple users –
NEW NMS client/server solution delivers
up to 10 Clients
full NMS functionality for all Nera radios
Connection to OSS
Connection to higher level
to desktops throughout the enterprise.
EMEA Americas
Asia
Nera Networks AS Nera Networks Inc.
Nera Telecommunications Ltd.
Kokstadveien 23, PO Box 7090 200 Research Drive
109 Defu Lane 10
N-5020 Bergen, Norway Wilmington MA 01887, USA
Singapore 539225
Tel: + 47 55 22 51 00 Tel: + 1 617 476 8888
Tel: + 65 628 3388
Fax: + 47 55 22 52 99 Fax: + 1 978 988 1094
Fax: + 65 6383 9566
E-mail: webmaster@nera.no E-mail: webmaster@nera.no
E-mail: webmaster@neratel.com.sg
Copyright © 2002 Nera Networks AS. All rights reserved. Information in this
document is subject to change without notice. Nera Networks assumes no
responsibility for any errors which may occur in this document.
NN/0802/BH
Banda de 13 GHz. Sub-banda de 12,75 a 13,25 GHz. Rec.497-4
CONATEL
Portadora de Frecuencia Portadora de Frecuencia
Tx (MHz) Rx (MHz)
11 12754,5 1’1 13020,5
12 12761,5 1’2 13027,5
1 12765 1’ 13031
OBSERVACIONES:
13 12768,5 1’3 13034,5
14 12775,5 1’4 13041,5
Capacidad de los Sistemas:
1i 12779 1’i 13045
Varias Capacidades
PRODUCT OVERVIEW
The Cisco Aironet® IEEE 802.11a/b/g Wireless
PCI Adapter provides high-performance
54 Mbps connectivity in the 2.4 and 5 GHz
bands. Whether configured to support single
802.11b coverage, single 802.11g coverage,
single 802.11a coverage, dual-mode 802.11a/g
coverage or tri-mode 802.11a/b/g coverage, the
Cisco Aironet 802.11a/b/g Wireless PCI
Adapter is Wi-Fi compliant and combines the
freedom of wireless connectivity with the
performance, security, and manageability that
businesses require (Figure 1).
The low-profile form factor and two-meter
cable length provide significant flexibility for
installation in low-profile devices, such as
slim desktops and point-of-sale (POS) devices.
For versatility, both a low profile and a
standard profile bracket frame are included with
the adapter. The attached dual-band 2.4/5 GHz
1 dBi effective gain antenna has a 2-meter
cable allowing for optimal placement to
maximum performance.
LAN/WAN
Client Adapter
ROAMING
Laptop with
802.11a Client
Adapter
Laptop with
802.11a/b/g
Router
Client Adapter Aironet 1200 Series
Power Injector Switch
802.11a/b/g
Access Point
Cisco Wireless
IP Phone 7920
Desktop with
802.11a/b/g
Cisco Wireless
Client Adapter
Wireless Connections IP Phone 7920
802.11b/g Cell (802.11b)
802.11a Cell
Roaming
Switched Connections
The Cisco Aironet 802.11a/b/g Wireless PCI Adapter supports the most
common 802.1X authentication types,
including Cisco LEAP, Extensible Authentication Protocol Transport
Layer Security (EAP-TLS), Protected Extensible
Authentication Protocol (PEAP-GTC), and Protected Extensible
Authentication Protocol Microsoft Challenge
Handshake Authentication Protocol Version 2 (PEAP-MSCHAP V2). A wide
selection of RADIUS servers, such as
the Cisco Secure Access Control Server (ACS) and Cisco Access Registrar
(AR) server, can be used for enterprise-class
centralized security and management that includes:
RADIUS Server
User Database
all User requests
to access LAN
1 Client associates
with Access Point
Campus Network
Campus Network
Figure 3
Fast Secure Roaming
1.
Access Point (AP1) must now 802.1X authenticate with the
WDS
Router to establish a secure session
2.
Initial client 802.1X authentication goes to a central
AAA
server (~500ms)
3.
During a client roam, the client signals to the WDS
WAN Router it
has roamed and WDS will send the clients key to the
Based WDS new
Access Point (AP2)
Cisco Secure 4.
The overall roam time is reduced to <150ms, and
Access Control in
most cases, <100ms
(AAA Server)
AP2
AP1
Figure 4
Cisco Aironet Desktop Utility (Profile Management) Screen
Feature Benefit
Feature Benefit
Part Number
• AIR-PI21AG-A-K9
• AIR-PI21AG-E-K9
• AIR-PI21AG-J-K9
• AIR-PI21AG-W-K9
• AIR-PI21AG-A-K9-10 (10-unit bulk pack)
Regulatory Domains:
• A=Americas
• E=ETSI
• J=TELEC (Japan)
• W=Rest-of-world
Customers are responsible for verifying approval for use in their
countries. Please see http://www.cisco.com/go/
aironet/compliance to verify approval and to identify the regulatory
domain that corresponds to a particular country.
Form Factor
Interface
Network Standard
IEEE 802.11a/b/g
Operating Voltage
3.3 V ( 0.3 V)
LED
Wireless Medium
802.11g:
• Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency
Divisional Multiplexing (OFDM)
802.11a:
• Orthogonal Frequency Division Multiplexing (OFDM)
Modulation
DSSS
• Differential Binary Phase Shift Keying (DBPSK) @ 1 Mbps
• Differential Quadrature Phase Shift Keying (DQPSK) @ 2 Mbps
• Complementary Code Keying (CCK) @ 5.5 and 11 Mbps
OFDM
• BPSK @ 6 and 9 Mbps
• QPSK @ 12 and 18 Mbps
• 16-Quadrature Amplitude Modulation (QAM) @ 24 and 36 Mbps
• 64-QAM @ 48 and 54 Mbps
Frequency Bands
Delay Spread
• 350 ns @ 1 Mbps
• 300 ns @ 2 Mbps
• 200 ns @ 5.5 Mbps
• 400 ns @ 6 Mbps
• 250 ns @ 9 Mbps
• 130 ns @ 11 Mbps
• 250 ns @ 12 Mbps
• 220 ns @ 18 Mbps
• 160 ns @ 24 Mbps
• 100 ns @ 36 Mbps
• 90 ns @ 48 Mbps
• 70 ns @ 54 Mbps
802.11g:
• -94 dBm @ 1 Mbps
• -93 dBm @ 2 Mbps
• -92 dBm @ 5.5 Mbps
• -86 dBm @ 6 Mbps
• -86 dBm @ 9 Mbps
• -90 dBm @ 11 Mbps
• -86 dBm @ 12 Mbps
• -86 dBm @ 18 Mbps
• -84 dBm @ 24 Mbps
• -80 dBm @ 36 Mbps
• -75 dBm @ 48 Mbps
• -71 dBm @ 54 Mbps
802.11a:
5150 to 5250 MHz 5250 to 5350 MHz 5725 to 5805 MHz
5.470 -5.725 GHz
• -87 dBm @ 6 Mbps • -89 dBm @ 6 Mbps • -84 dBm @ 6 Mbps
• -87 dBm @ 6 Mbps
• -87 dBm @ 9 Mbps • -89 dBm @ 9 Mbps • -84 dBm @ 9 Mbps
• -87 dBm @ 9 Mbps
• -87 dBm @ 12 Mbps • -89 dBm @ 12 Mbps • -84 dBm @ 12
Mbps • -87 dBm @ 12 Mbps
• -87 dBm @ 18 Mbps • -85 dBm @ 18 Mbps • -83 dBm @ 18
Mbps • -87 dBm @ 18 Mbps
• -82 dBm @ 24 Mbps • -82 dBm @ 24 Mbps • -82 dBm @ 24
Mbps • -82 dBm @ 24 Mbps
• -79 dBm @ 36 Mbps • -79 dBm @ 36 Mbps • -79 dBm @ 36
Mbps • -79 dBm @ 36 Mbps
• -74 dBm @ 48 Mbps • -74 dBm @ 48 Mbps • -72 dBm @ 48
Mbps • -74 dBm @ 48 Mbps
• -72 dBm @ 54 Mbps • -72 dBm @ 54 Mbps • -65 dBm @ 54
Mbps • -72 dBm @ 54 Mbps
802.11b/g:
• 20 dBm (100 mW) @ 1, 2, 5.5 and 11 Mbps
• 18 dBm (63 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18 and 24 Mbps
• 17 dBm (50 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24 and 36 Mbps
• 15 dBm (32 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36 and 48 Mbps
• 13 dBm (20 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
• 10 dBm (10 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
802.11a:
• 16 dBm (40 mW) @ 6, 9, 12, 18 and 24 Mbps
• 14 dBm (25 mW) @ 6, 9, 12, 18, 24 and 36 Mbps
• 13 dBm (20 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
• 11 dBm (13 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
• 10 dBm (10 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
Maximum power setting will vary according to individual country
regulations.
Transmit Receive
Standby
802.11a 554 mA maximum 318 mA maximum
203 mA average
802.11b 539 mA maximum 327 mA maximum
203 mA average
802.11g 530 mA maximum 282 mA maximum
203 mA average
802.11a 802.11b/g
Indoor (typical)
Outdoor (typical)
Compliance
• ICES-003 • WHQL
• EN 300.328 (Europe)
(Canada)
• AS 4268.2 (Australia)
• VCCI (Japan)
• ARIB STD-T71 (Japan)
• EN 301.489-1 and
• Telec 33 and 66 (Japan)
-17 (Europe)
• AS/NZS 3548 (Australia and New Zealand)
Power Management
Attached dual-band 2.4/5 GHz 1 dBi effective gain antenna with 2-meter
cable
Drivers
Dimensions
Weight
Environmental
Warranty
One Year
Wi-Fi Certification
Cisco Systems has more than 200 offices in the following countries
and regions. Addresses, phone numbers, and fax numbers are listed on the
C i s c o We b
s i t e a t w w w. c i s c o . c o m / g o / o f fi c e s
Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile •
China PRC • Colombia • Costa Rica • Croatia • Cyprus
Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong
Kong SAR • Hungary • India • Indonesia • Ireland
Israel • Italy • Japan • Korea • Luxembourg • Malaysia • Mexico • The Netherlands •
New Zealand • Norway • Peru • Philippines • Poland
Portugal • Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore •
Slovakia • Slovenia • South Africa • Spain • Sweden
S w i t z e r l a n d • Ta i w a n • T h a i l a n d • Tu r k e y • U k r a i n e •
U n i t e d K i n g d o m • U n i t e d S t a t e s • Ve n e z u e l a • Vi e t n a
m • Z i m b a b w e
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved.
Cisco, Cisco Systems, and the Cisco Systems logo are registered trademarks of Cisco
Systems, Inc. and/or its affiliates in the United States and
certain other countries.
All other trademarks mentioned in this document or Website are the property of
their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company.
(0403R)
203181_ETMG_JS_05.04
DATA SHEET
PRODUCT OVERVIEW
The Cisco® Aironet® IEEE 802.11a/b/g Wireless
CardBus Adapter provides high-
performance 54 Mbps connectivity in the 2.4
and 5 GHz bands. Whether configured
to support single 802.11b coverage, single
802.11g coverage, single 802.11a coverage, dual-
mode 802.11a/g coverage or tri-mode
802.11a/b/g coverage, the Cisco Aironet 802.11a/b/g
Wireless Cardbus Adapter is Wi-Fi compliant
and combines the freedom of wireless
connectivity with the performance, security,
and manageability that businesses require
(Figure 1).
LAN/WAN
Client Adapter
ROAMING
Laptop with
802.11a Client
Adapter
Laptop with
802.11a/b/g
Router
Client Adapter Aironet 1200 Series
Power Injector Switch
802.11a/b/g
Access Point
Cisco Wireless
IP Phone 7920
Desktop with
802.11a/b/g
Cisco Wireless
Client Adapter
Wireless Connections IP Phone 7920
802.11b/g Cell (802.11b)
802.11a Cell
Roaming
Switched Connections
RADIUS Server
User Database
all User requests
to access LAN
1 Client associates
with Access Point
Campus Network
Campus Network
Figure 3
Fast Secure Roaming
1.
Access Point (AP1) must now 802.1X authenticate with the
WDS
Router to establish a secure session
2.
Initial client 802.1X authentication goes to a central
AAA
server (~500ms)
3.
During a client roam, the client signals to the WDS
WAN Router it
has roamed and WDS will send the clients key to the
Based WDS new
Access Point (AP2)
Cisco Secure 4.
The overall roam time is reduced to <150ms, and
Access Control in
most cases, <100ms
(AAA Server)
AP2
AP1
Figure 4
Cisco Aironet Desktop Utility (Profile Management) Screen
Feature Benefit
Part Number
• AIR-CB21AG-A-K9
• AIR-CB21AG-E-K9
• AIR-CB21AG-J-K9
• AIR-CB21AG-W-K9
• AIR-CB21AG-A-K9-40 (40-unit bulk pack)
Regulatory Domains:
• A=Americas
• E=ETSI
• J=TELEC (Japan)
• W=Rest-of-world
Customers are responsible for verifying approval for use in their
country. Please see http://www.cisco.com/go/
aironet/compliance to verify approval and to identify the regulatory
domain that corresponds to a particular country.
Form Factor
CardBus Type II
Interface
Network Standard
IEEE 802.11a/b/g
Operating Voltage
3.3 V ( 0.3 V)
LED
Wireless Medium
802.11g:
• Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency
Divisional Multiplexing (OFDM)
802.11a:
• OFDM
Cisco Systems, Inc.
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
Page 8 of 13
Table 2 Product Specifications (Continued)
Modulation
DSSS
• Differential Binary Phase Shift Keying (DBPSK) @ 1 Mbps
• Differential Quadrature Phase Shift Keying (DQPSK) @ 2 Mbps
• Complementary Code Keying (CCK) @ 5.5 and 11 Mbps
OFDM
• BPSK @ 6 and 9 Mbps
• QPSK @ 12 and 18 Mbps
• 16-Quadrature Amplitude Modulation (QAM) @ 24 and 36 Mbps
• 64-QAM @ 48 and 54 Mbps
Frequency Bands
Delay Spread
• 350 ns @ 1 Mbps
• 300 ns @ 2 Mbps
• 200 ns @ 5.5 Mbps
• 400 ns @ 6 Mbps
• 250 ns @ 9 Mbps
• 130 ns @ 11 Mbps
• 250 ns @ 12 Mbps
• 220 ns @ 18 Mbps
• 160 ns @ 24 Mbps
• 100 ns @ 36 Mbps
• 90 ns @ 48 Mbps
• 70 ns @ 54 Mbps
802.11g:
• -94 dBm @ 1 Mbps
• -93 dBm @ 2 Mbps
• -92 dBm @ 5.5 Mbps
• -86 dBm @ 6 Mbps
• -86 dBm @ 9 Mbps
• -90 dBm @ 11 Mbps
• -86 dBm @ 12 Mbps
• -86 dBm @ 18 Mbps
• -84 dBm @ 24 Mbps
• -80 dBm @ 36 Mbps
• -75 dBm @ 48 Mbps
• -71 dBm @ 54 Mbps
802.11a:
5150 to 5250 MHz 5250 to 5350 MHz 5725 to 5805 MHz
5.470 -5.725 GHz
• -87 dBm @ 6 Mbps • -89 dBm @ 6 Mbps • -84 dBm @ 6 Mbps
• -87 dBm @ 6 Mbps
• -87 dBm @ 9 Mbps • -89 dBm @ 9 Mbps • -84 dBm @ 9 Mbps
• -87 dBm @ 9 Mbps
• -87 dBm @ 12 Mbps • -89 dBm @ 12 Mbps • -84 dBm @ 12
Mbps • -87 dBm @ 12 Mbps
• -87 dBm @ 18 Mbps • -85 dBm @ 18 Mbps • -83 dBm @ 18
Mbps • -87 dBm @ 18 Mbps
• -82 dBm @ 24 Mbps • -82 dBm @ 24 Mbps • -82 dBm @ 24
Mbps • -82 dBm @ 24 Mbps
• -79 dBm @ 36 Mbps • -79 dBm @ 36 Mbps • -79 dBm @ 36
Mbps • -79 dBm @ 36 Mbps
• -74 dBm @ 48 Mbps • -74 dBm @ 48 Mbps • -72 dBm @ 48
Mbps • -74 dBm @ 48 Mbps
• -72 dBm @ 54 Mbps • -72 dBm @ 54 Mbps • -65 dBm @ 54
Mbps • -72 dBm @ 54 Mbps
802.11b/g:
• 20 dBm (100 mW) @ 1, 2, 5.5 and 11 Mbps
• 18 dBm (63 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18 and 24 Mbps
• 17 dBm (50 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24 and 36 Mbps
• 15 dBm (30 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36 and 48 Mbps
• 13 dBm (20 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
• 10 dBm (10 mW) @ 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 and 54 Mbps
802.11a:
• 16 dBm (40 mW) @ 6, 9, 12, 18 and 24 Mbps
• 14 dBm (25 mW) @ 6, 9, 12, 18, 24 and 36 Mbps
• 13 dBm (20 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
• 11 dBm (13 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
• 10 dBm (10 mW) @ 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
Maximum power setting will vary according to individual country
regulations.
Transmit Receive
Standby
802.11a 554 mA maximum 318 mA maximum
203 mA average
802.11b 539 mA maximum 327 mA maximum
203 mA average
802.11g 530 mA maximum 282 mA maximum
203 mA average
802.11a 802.11b/g
Indoor (typical)
Outdoor (typical)
Compliance
15.109 • Cisco
• EN 60950 • ARIB STD-T71 (Japan)
EN 301.489-1 and -
• RSS-210 (Canada)
CCX v1.0 and
17 (Europe)
• EN 300.328 (Europe)
CCX v2.0)
• Telec 33 and 66 (Japan)
• Wi-Fi
• AS/NZS 3548 (Australia and New Zealand)
• WHQL
• FCC Bulletin
OET-65C
• RSS-102
Power Management
Antenna
Drivers
Dimensions
2.05 in. (52.08mm) wide x 4.46 in. (113.35mm) deep x 0.19 in.
(4.80mm) high
Weight
1.6 oz (44.0g)
Environmental
Warranty
One Year
Wi-Fi Certification
Cisco Systems has more than 200 offices in the following countries
and regions. Addresses, phone numbers, and fax numbers are listed on the
C i s c o We b s
i t e a t w w w. c i s c o . c o m / g o / o f fi c e s
Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile •
China PRC • Colombia • Costa Rica • Croatia • Cyprus
Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong
Kong SAR • Hungary • India • Indonesia • Ireland
Israel • Italy • Japan • Korea • Luxembourg • Malaysia • Mexico • The Netherlands •
New Zealand • Norway • Peru • Philippines • Poland
Portugal • Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore •
Slovakia • Slovenia • South Africa • Spain • Sweden
S w i t z e r l a n d • Ta i w a n • T h a i l a n d • Tu r k e y • U k r a i n e •
U n i t e d K i n g d o m • U n i t e d S t a t e s • Ve n e z u e l a • Vi e t n a
m • Z i m b a b w e
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved.
Aironet, Cisco, Cisco Systems, and the Cisco Systems logo are registered trademarks
of Cisco Systems, Inc. and/or its affiliates in the United
States and certain other countries.
All other trademarks mentioned in this document or Website are the property of
their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company.
(0403R)
203181_ETMG_JS_05.04
REFERENCE GUIDE
OVERVIEW
Executive Overview
This antenna reference guide is intended to
provide information to assist in understanding
the issues and concerns of antennas used with
a Cisco® Aironet® wireless LAN system, or
wireless bridge system. It details deployment
and design, limitations and capabilities, and
basic theories of antennas. This document also
contains information about the Cisco
Systems® antennas and accessories, as well as
installation scenarios, regulatory information,
and technical specifications and diagrams of
the available antennas.
Overview of Antennas
Each Cisco Aironet radio product is designed
to perform in a variety of environments.
Implementing the antenna system can greatly
improve coverage and performance. To
optimize the overall performance of a Cisco
wireless LAN, it is important to understand
how to maximize radio coverage with the
appropriate antenna selection and placement.
An antenna system (Figure 1) comprises
numerous components, including the antenna,
mounting hardware, connectors, antenna
cabling, and in some cases, a lightning arrestor.
For a consultation, please contact a Cisco
Aironet partner at: tools.cisco.com/WWChannels/
LOCATR/jsp/partner_locator.jsp
Figure 1
Cisco Aironet 5.8 GHz and 2.4 GHz Antennas
The Cisco Aironet product lines utilize both the 2.4- and 5-GHz bands.
In the United States, three bands are defined
as unlicensed and known as the ISM bands. The ISM bands are as follows:
In every case, for the same transmitter power and antennas, a DS system
will have greater range, scalability,
and throughput than an FH system. For this reason Cisco has chosen to
support only DS systems in the Spread
Spectrum products.
TYPE OF ANTENNAS
Cisco offers several different styles of antennas for use with both
access points and bridges in the 2.4 GHz product
line, as well as the 5 GHz BR1400 bridge. Every antenna offered for
sale has been FCC-approved. Each type of
antenna will offer different coverage capabilities. As the gain of an
antenna increases, there is some tradeoff to its
coverage area. Usually gain antennas offer longer coverage distances,
but only in a certain direction. The radiation
patterns below will help to show the coverage areas of the styles of
antennas that Cisco offers: omnidirectional, yagis,
and patch antennas.
Figure 2
Omnidirectional Antenna
Directional Antennas
Directional antennas come in many different styles and shapes. An
antenna does not offer any added power to the
signal; it simply redirects the energy it receives from the
transmitter. By redirecting this energy, it has the effect of
providing more energy in one direction, and less energy in all other
directions. As the gain of a directional antenna
increases, the angle of radiation usually decreases, providing a
greater coverage distance, but with a reduced coverage
angle. Directional antennas include yagi antennas (Figure 4), patch
antennas (Figure 3), and parabolic dishes.
Parabolic dishes have a very narrow RF energy path and the installer
must be accurate in aiming these at each other.
Figure 3
Directional Patch Antenna
Directional
Yagi
Multipath Distortion
Multipath interference occurs when an RF signal has more than one path
between a receiver and a transmitter.
This occurs in sites that have a large amount of metallic or other RF
reflective surfaces.
Just as light and sound bounce off of objects, so does RF. This means
there can be more than one path that RF takes
when going from a TX to and RX antenna. These multiple signals combine
in the RX antenna and receiver to cause
distortion of the signal.
Figure 5
Multipath Distortion
Ceiling
Received Signals
TX RX
Time
Combined Results
Obstruction
Floor Time
Cisco Systems, Inc.
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
Page 5 of 39
You can relate this to a common occurrence in your car. As you pull up
to a stop, you may notice static on the radio.
But as you move forward a few inches or feet, the station starts to
come in more clearly. By rolling forward, you move
the antenna slightly, out of the point where the multiple signals
converge.
On transmit, the radio will select the same antenna it used the last
time it communicated to that given radio. If a
packet fails, it will switch to the other antenna and retry the packet.
One caution with diversity, it is not designed for using two antennas
covering two different coverage cells. The
problem in using it this way is that, if antenna no. 1 is communicating
to device no. 1 while device no. 2 (which is in
the antenna no. 2 cell) tries to communicate, antenna no. 2 is not
connected (due to the position of the switch), and
the communication fails. Diversity antennas should cover the same area
from only a slightly different location.
With the introduction of the latest DS physical layer chips, and the
use of diversity antenna systems, DS systems have
equaled or surpassed FH in handling multipath interference. While the
introduction of WBFH does increase the
bandwidth of FH systems, it drastically affects the ability to handle
multipath issues, further reducing its range
compared to present DS systems in high RF reflective sites.
Building Construction
The density of the materials used in a building’s construction
determines the number of walls the RF signal can pass
through and still maintain adequate coverage. Following are a few
examples. Actual effect on the RF must be tested
at the site, and therefore a site survey is suggested.
Paper and vinyl walls have very little effect on signal penetration.
Solid walls and floors and precast concrete walls
can limit signal penetration to one or two walls without degrading
coverage. This may vary widely based on any steel
reinforcing within the concrete. Concrete and concrete block walls may
limit signal penetration to three or four walls.
Wood or drywall typically allow for adequate penetration through five
or six walls. A thick metal wall reflects signals,
resulting in poor penetration. Steel-reinforced concrete flooring will
restrict coverage between floors to perhaps one
or two floors.
CABLING
As stated above, cabling introduces losses into the system, negating
some of the gain an antenna introduces and
reducing range of the RF coverage.
Interconnect Cable
Attached to all antennas (except the standard dipoles), this cable
provides a 50 Ohm impedance to the radio and
antenna, with a flexible connection between the two items. It has a
high loss factor and should not be used except
for very short connections (usually less than 10 feet). Typical length
on all antennas is 36 in. (or 12 in. on some
outdoor antennas).
Low-Loss/Ultra-Low-Loss Cable
Cisco offers two styles of cables for use with the 2.4 GHz product
line. These cables provide a much lower loss factor
than standard interconnect cable, and they can be used when the antenna
must be placed at any distance from the
radio device. While these are low-loss cables, they should still be
kept to a minimum length. There are two types
of cable supplied by Cisco for mounting the antenna away from the radio
unit. The 100 and 150 foot cables are
LMR600 type cable, while the 20 and 50 foot cables are LMR400 type
cables. All four lengths are supplied with
one RP-TNC plug and one RP-TNC jack connector attached. This allows for
connection to the radio unit and to
the interconnect cable supplied on the antennas.
Connectors
According to the US Federal Code of Regulations, products used in the
2.4 and 5 GHz ISM bands manufactured
after June 1994 must either use connectors that are unique, and
nonstandard (meaning not readily available on
the market by the average user) or be designed to be professionally
installed (professional here indicates a person
trained in RF installation and regulations). Since many of the 2.4 GHz
products are installed by non-RF trained
personnel, these products must comply with the unique connector ruling.
The BR1400 is designed for installation
by a RF professional, and therefore may use a standard ‘N’ style
connector. Cisco Aironet 2.4 GHz products use
Reverse Polarity -TNC (RP-TNC) connectors. While they are similar to
the normal TNC connectors, they cannot be
mated to the standard connectors. To ensure compatibility with Cisco
Aironet products, use antennas and cabling
from Cisco.
The FCC regulations forbid the use of external antennas in the lower
channels of the 5 GHz WLAN band (UNII-1);
therefore, the Cisco Aironet 5 GHz access points and client devices use
permenantly attached antennas. This is
covered in more depth later in the regulation section.
LIGHTNING ARRESTORS
When using outdoor antenna installations, it is always possible that an
antenna will suffer damage from potential
charges developing on the antenna and cable, or surges induced from
nearby lightning strikes. The BR1400 includes
lightning protection at the power injector, while the Aironet Lightning
Arrestor is designed to protect 2.4 GHz radio
equipment from static electricity and lightning-induced surges that
travel on coaxial transmission lines. Both systems
need to be properly grounded as identified in the hardware installation
manuals of the products. These protection
mechanisms will not prevent damage in the event of a direct lightning
hit.
Figure 6
Cisco Aironet Lightning Arrestor
To Antenna
Ground Wire
Lug
Lockwasher
Nut
To RF
Device
Installation
This arrestor is designed to be installed between your outdoor antenna
cable and the Aironet wireless device.
Installation should be indoors, or inside a protected area. A good
ground must be attached to the arrestor. This can
be accomplished by use of a ground lug attached to the arrestor and a
heavy wire (no. 6 solid copper) connecting the
lug to a good earth ground. See Figure 6.
Decibels
The decibel (dB) scale is a logarithmic scale used to denote the ratio
of one power value to another—for example:
0 dB 1 x (same) 0 dB
1 x (same)
1 dB 1.25 x -1 dB
0.8 x
3 dB 2x -3 dB
0.5 x
6 dB 4x -6 dB
0.25 x
10 dB 10 x -10 dB
0.10 x
12 dB 16 x -12 dB
0.06 x
20 dB 100 x -20 dB
0.01 x
30 dB 1000 x -30 dB
0.001 x
40 dB 10,000 x -40 dB
0.0001 x
dBm mW dBm
mW
0 dBm 1 mW 0 dBm
1 mW
3 dBm 2 mW -3 dBm
0.5 mW
6 dBm 4 mW -6 dBm
0.25 mW
7 dBm 5 mW -7 dBm
0.20 mW
Outdoor Range
The range of a wireless link is dependent upon the maximum allowable
path loss. For outdoor links this is a
straightforward calculation as long as there is clear line of sight
between the two antennas with sufficient clearance
for the Fresnel zone. For line of sight, you should be able to visibly
see the remote locations antenna from the main
site. (Longer distances may require the use of binoculars). There
should be no obstructions between the antennas
themselves. This includes trees, buildings, hills, and so on.
As the distance extends beyond six miles, the curve of the earth
(commonly called earth bulge) affects installation,
requiring antennas to be placed at higher elevations.
Figure 7
Fresnel Zone
Fresnel Zone
Raise Antennas
1 10 3
13
5 30 5
35
10 44 13
57
15 55 28
83
20 65 50
115
25 72 78
150
North America
• Connectors—In 1985, the FCC enacted standards for the commercial use
of spread spectrum technology in the
ISM frequency bands. Spread spectrum is currently allowed in the
900, 2400, and 5200 MHz bands. In 1989,
the FCC drafted an amendment governing spread spectrum systems in
the unlicensed ISM band. This amendment
is commonly referred to as the “new” or “’94” rules because it
impacts all spread spectrum products
manufactured after June 23, 1994. Products manufactured before June
23 are not affected by the amendment.
Congress enacted this amendment into law in 1990. The FCC 1994
rules are intended to discourage use of
amplifiers, high-gain antennas, or other means of significantly
increasing RF radiation. The rules are further
intended to discourage “home brew” systems which are installed by
inexperienced users and which—either
accidentally or intentionally—do not comply with FCC regulations
for use in the ISM band. Both the original
rules and the amendments sought to enable multiple RF networks to
“coexist” with minimum impact on one
another by exploiting properties of spread spectrum technology.
Fundamentally, the FCC 1994 rules intend to
limit RF communications in the ISM band to a well-defined region,
while ensuring multiple systems can operate
with minimum impact on one another. These two needs are addressed
by limiting the type and gain of antennas
used with a given system, and by requiring a greater degree of RF
energy “spreading.”
The FCC limits the use of the lower four channels (the UNII-1 band)
of the 5-GHz band, requiring antennas that
are permnenatly attached to the transmitting device. Due to this,
Cisco offers an articulating antenna paddle
with omnidirectional and patch antennas on the 802.11a access point
radio module to extend the flexibility
of deployments. For ceiling, desktop, or other horizontal
installations, the omnidirectional antenna provides
optimal coverage pattern and maximum range. For wall mount
installations, the patch antenna provides a
hemispherical coverage pattern that uniformly directs the radio
energy from the wall and across the room. In
omni mode, the antenna gain is 5dBi with a 360-degree radiation
pattern; in patch mode, the gain is 6dBi with a
180-degree pattern. Both the omnidirectional and patch antennas
provide diversity for maximum reliability, even
in high multi-path environments like offices.
• Antenna Gain and Power Output— FCC regulations specify maximum power
output and antenna gain. For the
UNII3 band, where the BR1400 operates, the FCC limits the
transmitter power to 1 watt or 30dBm, and the
antenna gain of an omni directional antenna to 6dBi. For
directional antennas operating in a point to point
system, gains of up to 23dBi are permitted. For antennas with gain
higher than 23dbi, the transmitter output
power must be reduced 1 dB for every 1 dB above 23dBi the antenna
gain increases.
The Cisco Aironet 2.4 GHz Bridge transmitter power is 20 dBm, which
is 10 dBm lower than maximum. This
then allows the use of antennas up to 10 dB over the initial 6dBi
limit, or 16dBi.
The main issue that comes to question here is, what differentiates
a point-to-point from a multipoint system.
Figure 8
Point-to-Point Wireless Bridge Solution
A
B
Figure 9
Point-to-Multipoint Wireless Bridge Solution
A
C
• Amplifiers—Since the ETSI regulation has such a low EIRP, the use of
amplifiers is typically not permitted in any
ETSI system.
Figure 10
IEEE 802.11b DSSS Channel Allocations
Channels
1 2 3 4 5 6 7 8 9
10 11 12 13 14
Regulatory Domain
1 2412 X
X – X
2 2417 X
X – X
3 2422 X
X X X
4 2427 X
X X X
5 2432 X
X X X
6 2437 X
X X X
7 2442 X
X X X
8 2447 X
X X X
9 2452 X
X X X
10 2457 X
X – X
11 2462 X
X – X
12 2467 –
X – X
13 2472 –
X – X
14 2484 –
– – X
30 MHz
30 MHz
20 MHz
20 MHz
44
5.230 GHz
48
5.240 GHz
60
5.300 GHz
64
5.320 GHz
USA UNII upper band 149
5.745 GHz
5.725–5.825 GHz
153
5.795 GHz
157
5.785 GHz
161
5.805 GHz
Part of BR1410 Integrated Patch 5.8 GHz UNII-3 Patch antenna. When the
captured antenna version is ordered, this 22.5dBi
(BR1410-A-K9) antenna is attached to the BR1410
bridge and provides for an integrated solution with
exceptional gain. The antenna is not
compatible with other Cisco Aironet radio
products operating in the 5 GHz
frequency band.
Table 9 Accessories
AIR-ANT5959
5.3" 2.8"
0.9"
Ceiling Bracket
shown for reference
VSWR 1.7:1
Power 5 watts
Gain 2.0dBi
Polarization Vertical
linear
Azimuth 3dB BW
Omnidirectional
Elevations 3dB BW 80
degrees
Dimensions (H x W x D) 5.3 x
2.8 x 0.9 in.
Mounting Drop
ceiling cross member mount
AIR-ANT3351
6.5"
7.0"
2.12"
Cable length—36"
VSWR Less
than 2:1
Gain 2.2dBi
Polarization Linear
Azimuth 3dB BW
Omnidirectional
Elevations 3dB BW 80
degrees
Dimensions (H x W x D) 6.5 x
7.0 x 2.12 in.
AIR-ANT4941
4.5"
1"
RP-TNC
Power 5 watts
Gain 2dBi
Polarization Linear
Azimuth 3dB BW
Omnidirectional
Mounting To RP-TNC
Connector
AIR-ANT1728
Attaches to Ceiling
Cross Member
9.0"
Gain 5.2dBi
Polarization Vertical
Azimuth 3dB BW
Omnidirectional 360 degrees
Dimensions (H x W) 9 x 1.25
in.
Mounting Drop
ceiling cross member—indoor only
AIR-ANT2506
11.5"
1" Polycarbonate
1.125" Aluminium
Mounting
Clamps
Mast Cable
Gain 5.2dBi
Polarization Vertical
Azimuth 3dB BW
Omnidirectional 360 degrees
Dimensions (H x W) 11.5 x
1.125 in.
AIR-ANT3213
5" 1"
12"
VSWR 2:1
Nominal
Gain 5.2dBi
Polarization Vertical
Azimuth 3dB BW
Omnidirectional 360 degrees
Dimensions (H x W x D) 12 x 5 x 1
in.
AIR-ANT24120
39.5"
VSWR 1.5:1
Gain 12dBi
Polarization Linear,
Vertical
Azimuth 3dB BW
Omnidirectional 360 degrees
Dimensions (H x W) 42 x 1.25
in.
Mounting Mast
Mount
AIR-ANT2414S-R
4"
6.375"
Variable
2"–5"
36"
2"
VSWR 1.5:1
Gain 14dBi
Polarization Linear,
Vertical
Azimuth 3dB BW 90
degrees
Dimensions (H x W x D) 36 x 6
x 4 in.
Mounting Mast
Mount
AIR-ANT1729
3.75"
0.5"
5.5"
Gain 6dBi
Polarization Linear
Azimuth 3dB BW 65
degrees
Dimensions (H x W x D) 5.5 x
3.75 x 0.5 in.
Mounting Wall
Mount
AIR-ANT2012
0.173ø THRU
4–PLACES
VSWR 1.7:1
Nominal
Gain 6dBi
Polarization Vertical
Dimensions (H x W x D) 6.65 x
4.78 x .82 in.
AIR-ANT3549
Vertical Radiation
Horizontal Radiation
4.88"
Gain 8.5dBi
Polarization Vertical
Azimuth 3dB BW 60
degrees
Elevations 3dB BW 55
degrees
Dimensions (H x W x D) 4.88 x
4.88 x .6 in.
Mounting Wall
Mount
AIR-ANT2410Y-R
7.25"
3"
Connector RP TNC
Gain 10dBi
Polarization Vertical
Azimuth 3dB BW 55
degrees
Dimensions (H x W) 3 x 7.25
in.
Mounting Wall/Mast
Mount
AIR-ANT1949
18"
13.5dB Yagi—2.4GHz
Connector RP TNC
Gain 13.5dBi
Polarization Vertical
Azimuth 3dB BW 30
degrees
Elevations 3dB BW 25
degrees
Dimensions (H x W) 18 x 3
in.
Mounting Mast/Wall
Mount
AIR-ANT3338
8 1/2"
COAX
10 1/2" 5" 24"
REF
8 1/2"
Power 5 watts
Gain 21dBi
Polarization Vertical
Dimensions (H x W) 24 x 15.5
in.
VSWR 1.5:1
Nominal
Gain 5dBi
Omnidirectional
6dBi Patch
Polarization Vertical
Azimuth 3dB BW
Omnidirectional 360 degrees
Patch 55
degrees
AIR-ANT58G9VOA-N
0.75" Dia
17"
1.25" Dia
Gain 9dBi
Temperature (operating) -22 F Min, 140 F Max
Beamtilt 0 degrees
Dimensions 17 x 1.25 in.
AIR-ANT58G100SSA-N
Mounting Bracket
For Mast Mount
For Wall Mount Drain Plug
Hose Clamp
2" dia
Mounting Bracket
Antenna
1.5m Long
Isometric View
Side View
Gain 9.5dBi
Temperature (operating) -20 F Min, +60 C Max
Polarization H or V Mounting
1.5–2.5 in. Mast mount
AIR-ANT58G28SDA-N
“U” bolt
adjustment
“U” bolt
Bulk
head type “N” female
connector
Side View
Polarization V or H
Temperature (operating) –30C Min, +60C Max
Cisco Systems has more than 200 offices in the following countries
and regions. Addresses, phone numbers, and fax numbers are listed on the
Cisco Web site at
www.cisco.com/go/offices
Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile •
China PRC • Colombia • Costa Rica • Croatia
Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong
Kong SAR • Hungary • India • Indonesia • Ireland
Israel • Italy • Japan • Korea • Luxembourg • Malaysia • Mexico • The Netherlands •
New Zealand • Norway • Peru • Philippines • Poland
Portugal • Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore •
Slovakia • Slovenia • South Africa • Spain • Sweden
S w i t z e r l a n d • Ta i w a n • T h a i l a n d • Tu r k e y • U k r a i n e •
U n i t e d K i n g d o m • U n i t e d S t a t e s • Ve n e z u e l a • Vi e t n a
m • Z i m b a b w e
Copyright © 2004 Cisco Systems, Inc. All rights reserved. Aironet, Cisco IOS,
Cisco, Cisco Systems, and the Cisco Systems logo are registered trademarks or
trademarks of Cisco Systems, Inc. and/or its affiliates in the
United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of
their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company.
(0402R)
203179_ETMG_JS_04.04
DATA SHEET
PRODUCT OVERVIEW
The Cisco Aironet 1300 Series Outdoor Access
Point/Bridge Power Injector, as seen in
Figure 1, converts the standard 10/100 BaseT
Ethernet interface that is suitable for weather
protected areas to a dual F-Type connector
interface for coax cables that are more suitable
for harsh outdoor environments. The Power
Injector also provides power to the outdoor unit
over the same cables with a power discover
feature and surge protection. To support longer
cable runs from your wireless network switch
or router, the Power Injector enables total
cable runs up to 200 meters (Category 5 Cable
+ Coax). The Cisco Aironet 1300 Series
Outdoor Access Point/Bridge ships with the
Power Injector LR2 and an AC power supply.
Figure 1
Power Injector AIR-PWRINJ-BLR2/AIRPWRINJ-BLR2T
Power Strip
Universal
Power
Supply
Wiring Closet
Up to 300 ft
Up to 300 ft
LAN
Figure 3
Network Diagram for Optional Power Injector AIR-PWRINJ-BLR2T
Power Source
12-
40VDC
Wiring Closet
Up to 300 ft
Up to 300 ft
LAN
PRODUCT SPECIFICATIONS
Table 1
Network Management
Table 2
AIR-PWRINJ-BLR2
AIR-PWRINJ-BLR2T
Physical
Table 3
AIR-PWRINJ-BLR2
AIR-PWRINJ-BLR2T
Weight 2 lbs.
2 lbs.
(1 kg)
(1 kg)
Table 4
AIR-PWRINJ-BLR2
AIR-PWRINJ-BLR2T
ORDERING INFORMATION
To place an order, visit the Cisco Ordering Home Page. For assistance
in determining the correct wireless access
point/bridge to order, contact your local account representative.
Table 5
Product Name
Product Part Number
Cisco Systems has more than 200 offices in the following countries
and regions. Addresses, phone numbers, and fax numbers are listed on the
C i s c o We b
s i t e a t w w w. c i s c o . c o m / g o / o f fi c e s
Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile •
China PRC • Colombia • Costa Rica • Croatia • Cyprus
Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong
Kong SAR • Hungary • India • Indonesia • Ireland
Israel • Italy • Japan • Korea • Luxembourg • Malaysia • Mexico • The Netherlands •
New Zealand • Norway • Peru • Philippines • Poland
Portugal • Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore •
Slovakia • Slovenia • South Africa • Spain • Sweden
S w i t z e r l a n d • Ta i w a n • T h a i l a n d • Tu r k e y • U k r a i n e •
U n i t e d K i n g d o m • U n i t e d S t a t e s • Ve n e z u e l a • Vi e t n a
m • Z i m b a b w e
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved.
Cisco, Cisco Systems and the Cisco Systems logo are registered trademarks of Cisco
Systems, Inc. and/or its affiliates in the United States and
certain other countries.
All other trademarks mentioned in this document or Website are the property of
their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company.
(0403R)
203179_ETMG_JS_05.04
DATA SHEET
PRODUCT OVERVIEW
The Cisco Aironet® 1300 Series Outdoor Access Point/Bridge (Figure 1) is an 802.11g
access point and bridge that provides high-speed and cost-
effective wireless connectivity between multiple fixed or mobile networks and
clients. Building a metropolitan-area wireless infrastructure with the
Cisco® Aironet 1300 Series provides deployment personnel with a flexible, easy-to-
use solution that meets the security requirements of wide-area
networking professionals.
The Cisco Aironet 1300 Series supports the 802.11g standard—providing 54-Mbps data
rates with a proven, secure technology while maintaining
full backward compatibility with legacy 802.11b devices. Cisco Systems® makes the
maintenance and installation of the Cisco Aironet 1300 Series
easy by integrating it with your wired network via the Cisco Structured Wireless-
Aware Network (SWAN) framework. Based on Cisco IOS®
Software, the Cisco Aironet 1300 Series provides advanced features such as Fast
Secure Roaming, quality of service (QoS), and VLANs.
The flexibility of the Cisco Aironet 1300 Series allows it to operate as a wireless
bridge, access point, or a workgroup bridge.
Access Point
Engineered specifically for harsh outdoor environments, yet also capable in indoor
deployments, the Cisco Aironet 1300 Series is ideal for wireless
LANs (WLANs) requiring external access points. The Cisco Aironet 1300 Series is
WiFi-certified as an access point and also supports the innovative
features available with Cisco Aironet and Cisco Compatible client devices.
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights
reserved. Important Notices and Privacy Statement.
Page 1 of 19
Bridge
The Cisco Aironet 1300 Series supports either point-to-point or point-to-multipoint
configuration to cost-effectively interconnect remote, temporary,
or mobile networks. It can serve as an upgrade or replacement to the Cisco Aironet
350 Wireless Bridge by providing over-the-air compatibility with
existing Cisco Aironet 350 Series wireless bridges. While in bridge mode, client
associations are also accepted—effectively providing simultaneous
bridge and access- point capability.
Workgroup Bridge
As a workgroup bridge, the Cisco Aironet 1300 Series quickly connects any Ethernet-
enabled device, such as a laptop or other portable computer,
to a WLAN. By adding a standard Ethernet hub or switch, you can connect up to 255
of these devices to any Cisco Aironet access point or wireless
bridge.
Campus Networks
Whether a typical college campus or corporate offices with multiple buildings, IT
professionals are faced with interconnecting local area networks in
each of the buildings. These LANs require cost-effective, high-bandwidth
connections with the flexibility and control often not available via leased
lines or cable installations requiring trenching.
Temporary Networks
The variety of temporary solutions is limitless, with applications such as remote
military campaigns, short-term office leases, temporary buildings
such as trailers, or even parking lot tent sales. These deployments require a
temporary network infrastructure that is rugged, portable, easy to install,
and flexible.
BENEFITS
Industry-Leading Performance
• Data rates of 54 Mbps in the 2.4 GHz band
• Range of 20 miles (32 kilometers [km]) at 11 Mbps
• Aggregate throughputs approaching 28 Mbps
• Maximum transmit power of 100 milliwatts (mW) for 802.11b and 30 mW for 802.11g
• For vehicle installed deployments, over 100 km per hour speeds at 12 and 24 Mbps
with 128 byte packets at 1 percent Packet Error Rate (PER)
• Support for antenna diversity
The optional Cisco Aironet Power Injector LR2T takes power from any +12 to +40 VDC
source not supplied by Cisco. Typically the DC source
is a vehicle or solar-power source (Figure 5). This power injector provides the
flexibility needed when an AC power source is not available.
FEATURES
• The Cisco Wireless Security Suite supports Wi-Fi Protected Access (WPA) and Wi-Fi
Protected Access 2 (WPA2) providing access control via
per-user, per-session mutual authentication and data privacy via strong dynamic
encryption.
• Only legitimate clients are allowed to associate with legitimate and authorized
network RADIUS servers via authorized access points.
• Stronger encryption is provided by WPA with TKIP enhancements such as message
integrity check (MIC), per-packet keys via initialization vector
hashing, and broadcast key rotation and by WPA2 with AES.
© 2006 Cisco Systems, Inc. All
rights reserved.
Important notices, privacy statements, and trademarks of
Cisco Systems, Inc. can be found on cisco.com.
Page 7 of 19
• A variety of IEEE 802.1X extensible authentication protocol (EAP) types are
supported including Cisco LEAP, Protected EAP-Generic Token
Card (PEAP-GTC), PEAP-Microsoft Challenge Authentication Protocol Version 2
(PEAP-MSCHAPv2), EAP-Transport Layer Security (EAP-
TLS), EAP-Tunneled TLS (EAP-TTLS), EAP-Subscriber Identity Module (EAP-SIM), and
EAP-Flexible Authentication via Secure Tunneling
(EAP-FAST)
• The Cisco Aironet 1300 Series in bridge role supports LEAP for mutual
authentication and both Cisco TKIP and WPA TKIP algorithms.
However, Cisco TKIP is recommended when the Cisco Aironet 1300 Series is
configured as a bridge to support concatenation.
• A wide selection of RADIUS servers, such as the Cisco Secure Access Control
Server (ACS), can be used for enterprise-class centralized user
management. RADIUS accounting records for all authentication attempts are
supported.
Support for Port Aggregation Protocol and Cisco Fast EtherChannel Technology
Bandwidth can be increased between bridged networks through the aggregation of
multiple bridges at each site via Cisco Fast EtherChannel®
technology, Port Aggregation Protocol (PAgP), or routing protocols.
Hot Standby
The Cisco Aironet 1300 Series in access-point mode supports failover to a standby
device, thus increasing network uptime.
Load Balancing
The Cisco Aironet 1300 Series distributes user connections across available access
points to optimize aggregate throughput.
QoS Support
The Cisco Aironet 1300 Series supports WMM. WMM improves the user experience for
audio, video, and voice applications over a Wi-Fi wireless
connection. WMM is a subset of the IEEE 802.11e QoS draft standard, supporting QoS-
prioritized media access via the Enhanced Distributed
Channel Access (EDCA) method. The Cisco Aironet 1300 Series also supports
prioritization of traffic based on 802.1P tags and 802.1Q priority
values and applies QoS policy accordingly for different application requirements,
thus improving the voice and video user’s experience.
VLAN Support
The Cisco Aironet 1300 Series can manage up to 16 VLANs, which allows customers to
differentiate LAN policies and services—such as security
and QoS—for different users. The Cisco Aironet 1300 Series also supports 802.1Q
trunking.
SUMMARY
The Cisco Aironet 1300 Series is a flexible outdoor 802.11b and 802.11g access
point and bridge that provides high-speed and cost-effective
wireless connectivity between multiple fixed or mobile networks and clients.
© 2006 Cisco Systems, Inc. All
rights reserved.
Important notices, privacy statements, and trademarks of
Cisco Systems, Inc. can be found on cisco.com.
Page 9 of 19
PRODUCT SPECIFICATIONS
Product Compatibility
Table 1 outlines the products that are compatible with the Cisco Aironet 1300
Series.
Protocols
Table 2 lists the protocols supported by the Cisco Aironet 1300 Series.
Table 2. Protocols
Non-Overlapping Channels 3
Table 3. Components
Power Injector LR2T The Power Injector LR2T supports all the capability
of LR2. It is designed for use in transportation applications
and operates with an input voltage range of +12 to
+40V DC. The DC source is provided by the user. The
LR2T can therefore be vehicle or solar powered.
Interfaces
Table 4 lists the Cisco Aironet 1300 Series interfaces.
Table 4. Interfaces
AIR-BR1310G-x-K9 and
AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9-R
AIR-PWRINJ-BLR2T
DC Power —
One two-pin Switchcraft connector (with threaded locking
RJ-45 Interface —
One RJ-45 connector for console-port access (9600 bps
interface
Memory
Table 5 lists the memory requirements for the Cisco Aironet 1300 Series.
Eight Megabytes of Flash Memory Memory space for future firmware upgrades
to support new 802.11 standards and advanced features.
Performance
Table 6 lists the Cisco Aironet 1300 Series performance capabilities.
AIR-BR1310G-x-K9
AIR-BR1310G-x-K9-R
Maximum Bridge Over 100 km per hour at 12 and 24 Mbps with 128
byte packets at 1 percent PER
Relative Velocity
TELEC
4.5 miles (7 km) at 54 Mbps
0.7 miles (1.1 km) at 54 Mbps
12 miles (20 km) at 11 Mbps
3.2 miles (5 km) at 11 Mbps
21 dBi dish antenna at root and
13 dBi integrated antenna at root
and non-root bridge
non-root bridge
* The distances referenced here are approximations and should be used for
estimation purposes only.
AIR-BR1310G-x-K9
and AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9-R
AIR-PWRINJ-BLR2T
AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9 and AIR-BR1310G-x-K9-R
AIR-PWRINJ-BLR2T
Physical
Table 9 lists the physical specifications of the Cisco Aironet 1300 Series.
AIR-BR1310G-x-K9 and
AIR-BR1310G-x-K9-R AIR-PWRINJ-BLR2
AIR-PWRINJ-BLR2T
Power
Table 10 lists Cisco Aironet 1300 Series power requirements.
Country Compliance Customers are responsible for verifying approval for use
in their country. Please see
http://www.cisco.com/go/aironet/compliance to verify
approval and to identify the regulatory domain that
corresponds to a particular country. Not all regulatory
domains have been approved. As they are approved,
the part numbers will be available on the Global Price
List.
AIR-PWRINJ-BLR2T
Wi-Fi Certification
—
Additional Specifications
Warranty One year
ORDERING INFORMATION
To place an order, visit the Cisco Ordering Home Page. For assistance in
determining the correct wireless bridge to order, as well as appropriate
accessories, please read the Cisco Aironet 1300 Series Ordering Guide.
Cisco Systems has more than 200 offices in the following countries and
regions. Addresses, phone numbers, and fax numbers are listed on
the Cisco Website at
www.cisco.com/go/offices.
Copyright 2006 Cisco Systems, Inc. All rights reserved. CCSP, CCVP, the Cisco
Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco
Systems, Inc.;
Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks
of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP,
CCIE,
CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS,
Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco
Unity,
Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare,
GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ
logo, iQ Net
Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo,
Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing,
ProConnect,
RateMUX, ScriptShare, SlideCast, SMARTnet, The Fastest Way to Increase Your
Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc.
and/or its affiliates in
the United States and certain other countries.
© the
All other trademarks mentioned in this document or Website are 2006 Cisco
property of
Systems, Inc.owners.
their
respective All rights reserved.
The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (0601R) notices, privacy statements, and trademarks of
Cisco Systems, Inc. can be found on cisco.com.
Important
Page 19 of 19
Printed in the USA
C78-340315-00 03/06