MPA
EC-CERTIFICATE OF CONFORMITY
0761 - cPD- 0151
In compliance withthe Directive 86/106/EEC of the Council of European Communities of
21 December 1988 on the approximation of laws, reguiaions and administrate provisions
ofthe Member States relating fo the construction preducts (Construction Products Directv
(CPD), amended by the Directive S2/68/EEC of the Council ofthe European Communities of
*2.July 1983, has been stated that the construction product
Powored smoke and heat exhaust ventlators
Novax Axial Smoke Exhaust Vertilator
‘Type AUTIART
siameter 400 mm
‘lass F300,
produced by the manufacturer
Novenco
Industrve} 22
K-4700 Nasived
In the factory
Nastved (OK)
has been submitted to inal type-teting ofthe product and to factory production contol. The
Materiajprofanstatt for das Bauwesen Braunschapia as a notified body has performed the
inal Inspection ofthe factory and ofthe factory production contro and performs the
continuous eurvelance, assessment and approval ofthe factory preduction canal on @
‘regular bass
ce
‘This certifcate attests that al provisions concering the attestation of conformity described in
‘Annex ZA ofthe standard
EN 12101-2:2001-02
wore applied and that the product meets al requirements adéressed i this standard.
‘Additonal data to the applications cass are specified in the annex of this crtfeate,
This coticato has fest been issued on 2010-02-08. It remains valid as Jong 2s the
Conditions lad down in the harmonised technical specication In reference or tha
ot 0
‘manufacturing conditions in the factory or the factory production control tslf are
‘maaified significant.
(ER .
Braunschweig, 2010-0208 7, Xa\ i
ef WPA \e\ ‘Dring. W. Hinrichs
(pe 8) Head cerieaton
J
cearsa0s E(B.
\
Neecwsse‘Annex to the EC-Cerficate of Conformity 0761-CPD-0181
‘Axlal Smoke Exhaust Ventilators
4. Use and application classes
“The ventiator may be mounted as olows:
i outside ofthe bung without thermal insulation
outside of the bulcing including thermal insulstion
[inside the building but outside oF the fre zone, without thermal insulation
inside te buléing but outside ofthe fre zone inclusing thermal insulation
Blinside the fre zone
‘The motor ae shall be orientated as follows:
[norzontl, oor standing
orizontt, wall mounted
ajorizontl, cling mounted
Cvertical, ap upward
vertical, ap downward
vertical, wall mounted
Everical, cating mounted
BB The ventlator may be used fo both functions
Coating s necessary.
2. Minimum functioning time
In the test the ventilator maintained its function frat least 120 min
3. Technical product data
Brameter ao mam. J
Motor maker WEG (380 V, SOFB)
4. Additional information
Standards refered to:
(CENTaTOTS [EN T3507 | EN 1963-7 [EN 682 [ENVIS
~~ Eno the E¢-Certeate of contort ~