Escolar Documentos
Profissional Documentos
Cultura Documentos
1: Compressor
start on suction
Condenser:
Temp. primary
pump should be
running mode for
Discharge
Liquid level
compressor
running. Liquid Receiver:
Compressor stop
after achieved set
point of ammonia Compressor: Surge
temp. If glycol Drum Work on surge drum Throttle
tank temp Level level goes down
achieved, then
primary pumps
will be stop and
compressor will
stop until primary Suction Surge Drum:
pump start again
due to high glycol
temp. Heat
Transfer cooling
Suction Temp Exchanger:
from ammonia to
Glycol
Glycol System
Primary Pumps: Primary discharge
Secondary Suction
Tank Temp achieved primary pumps
will be off either running.
Glycol tank store cold glycol. Its take
a cold glycol from heat exchanger
with primary pumps circulation and
this cold glycol provide a CA Rooms Glycol
with help of secondary pumps. tank
Supply to CA Rooms
Secondary pump continuously running and
own speed increased & Decreased
according to demand of CA rooms cooling.
Return Line: