Escolar Documentos
Profissional Documentos
Cultura Documentos
INTRODUCTION
This bulletin provides the following information:
contents of this package
minimum system and hardware requirements
supported devices
instructions for installing LCS
technical support contact information
SYSTEM REQUIREMENTS
LCS is designed to operate under the following hardware and software
requirements.
SUPPORTED DEVICES
LCS currently supports the following devices:
Powerlink® NF500G3 Controller
Powerlink® NF1000G3 Controller
Powerlink® NF2000G3 Controller
Powerlink® NF3000G3 Controller
Powerlink® NF3000G3C Controller
INSTALLING LCS
Follow these installation steps:
1. Insert the LCS CD into your computer's CD-ROM drive. The autorun
program launches and displays two buttons: "Install" and "Browse CD."
NOTE: Use the "Browse CD" button anytime to access other files/utilities on
the CD.
2. Click the install button and follow the prompts of the install program.
3. When installation is complete, restart your computer.
4. Start LCS.
5. Click Tools > Check for Updates to ensure you are running the current version of
LCS.
www.squaredlightingcontrol.com
Web Site
http://www.squaredlightingcontrol.com
www.squaredlightingcontrol.com/contactus.cfm
Contact Us
www.squaredlightingcontrol.com/productregistration
Registration
http://www.squaredlightingcontrol.com/productregistration
Schneider Electric, USA Square D, , Clipsal, C-Bus, Saturn and Neo are trademarks or registered trademarks
320 Tech Park Drive of Schneider Electric and/or its affiliates in the United States and/or other countries.
La Vergne, TN, 37086
1-888-SquareD (1-888-778-2733) Electrical equipment should be installed, operated, serviced, and maintained only by
www.squaredlightingcontrol.com qualified personnel. No responsibility is assumed by Schneider Electric for any
consequences arising out of the use of this material.