Build on Uponor

with Base Flexiboard

230 V room controller with fast channel selector switch

NEW

Flexible allocation of one or more

actuators to the room thermostats
via selector switch during or after
installation

Pre-wiring without terminal diagram

Save time during installation and

commissioning
Significantly less effort thanks to
Uponor Base Flexiboard
No more need for re-wiring on site, no terminal diagram
required • For connection of 6 or 8 room thermostats and up to
12 actuators
Uponor Base Flexiboard is a 230 V control that enables • Individual allocation of the actuators to the room
­individual room control for 6 or 8 rooms. There are also thermostats via a selector switch
2 variants with integrated pump logic available. This switches
• Allocation of more than one actuator to a single room
the circulating pump on or off as required and enables an
thermostat
­energy-efficient operation.
• No need for a terminal diagram or for on-site ­
The Uponor Base Flexiboard control distributor, in re-wiring
­combination with prefabricated distribution stations, • Time saving in installation and commissioning
makes work much easier. • Suitable for conventional 230 V thermostats
• Version with pump connection and pump logic
Convenient allocation of the actuators to the room thermo- available
stats via a selector switch. This means there is no more need
for re-wiring on site. The allocated actuators can be changed
later on without difficulty. Multiple actuators can also be
­allocated to one room thermostat.

The use of Uponor Base Flexiboard in the prefabricat-

ed ­distribution station eliminates the need for a terminal
­diagram. This saves the installer time, because he can
­perform the allocation conveniently in a matter of seconds
using the selector switches and can also change it at will
without any effort.

Easy to change actuator

­allocation at any time

Flexiboard enables pre-­wiring

without a terminal d­ iagram in
prefabricated d
­ istribution stations

Uponor Corporation
Äyritie 20
01510 Vantaa
Finland
T +358 (0)20 129 211
F +358 (0)20 129 2841 www.uponor.com

1089190_TL_02/2017