Escolar Documentos
Profissional Documentos
Cultura Documentos
Remove USB cable from a computer because there is a necessary to use leased
cable for installation of firmware.
When remove it from the modular, hold the stopper of the modular jack by a
micro screw driver while remove it.
1. Installation of firmware
25-33671-20
50-14000-010
5) When attach the modular to LS2208, insert the modular slowly, and be
careful about modular jack is not broken off.
6) Insert the plug of AC adapter to AC100V socket after the completion of the
connection.
1/6
2.Install to the scanner
Select “NBRTEAAL.bhf” after click the file mark of “Product Code File”
* Please move to the directory that “NBRTEAAL.bhf” is saved, and select the file.
3/3
5) Select the name of “NBRTEAAL.bhf”.
Caution1:If error is shown when the installation, please do the power cycle of
LS2208.
2. After upgrading the firmware, you need to perform the “Factory Setting Barco
des”.
1) Connect the barcode reader to the console.
2) Read barcodes described on next pages step by step.
3/3
Factory Setting Barcodes
<FN3>91 <FN3>1000040
<FN3>80 <FN3>1000030
<FN3>1000000
<FN3>1000020
7. CODE39 banned
3. UPC-E banned
<FN3>1000010
4. UPC-A banned
2051102
8. Security Zone 2
3/3
<FN3>1000060
<FN3>6A14450A
9. ITF banned
14. SendF10
<FN3>7B1211
<FN3>4
<FN3>6C1243
<FN3>1040020
<FN3>6A144504
12. Send F4
<FN3>6A110
3/3
Only if the barcode reader is “BH2104”, the
following setting is necessary.
3 0 5 0 1 2 0 0 6 3
<FN3>A2
<FN3>A0
3/3