Escolar Documentos
Profissional Documentos
Cultura Documentos
REFERENCES
10. Bhola Jha, Ram, K& Mohan Rao 2011, ‘An overview of technology
and research in electrode design and manufacturing in sinking
electrical discharge machining’, Journal of Engineering Science and
Technology vol.4, no.2, pp.118-130.
11. Che Chung Wang & Biing Hwa Yan 2000, ‘Blind-hole drilling of
Al2O3/6061 Al composite using rotary electro discharge machining’,
Journal of Materials Processing Technology, vol. 102, no.1-3,
pp. 90-102.
21. Harpreet Singh& Amandeep Singh 2012, ‘Effect of Pulse On/Pulse Off
Time On Machining Of AISI D3 Die Steel Using Copper And Brass
Electrode In EDM’, International Journal of Engineering and Science,
ISSN: 2278-4721, vol.1, no.9, pp.19-22.
24. Ho, KH& Newman, ST 2003, ‘State of the art electrical discharge
machining (EDM)’, International Journal of Machine Tools &
Manufacture, vol.43, pp.1287-1300.
27. Hung NP, Yang IJ& Leong KW 1994, ‘Electrical discharge machining
of cast metal matrix composites’, Journal of Materials Processing
Technology, vol.41, pp.229– 236.
30. Jong Hyuk Jung& Won Tae Kwon 2010, ‘Optimization of EDM
process for multiple performance characteristics using Taguchi
method and Grey relation and analysis’, Journal of Mechanical
Science and Technology, vol.24, no.5, pp.1083-1090.
150
31. Kao, JY, Tsao, CC, Wang SS &Hsu, CY 2009, ‘Optimization of the
EDM parameters on machining Ti–6Al–4V with multiple quality
characteristics’, International Journal of Advanced Manufacturing
Technology, DOI 10.1007/s00170-009-2208-3.
32. KoTa Chiang 2008, ‘Modeling and analysis of the effects of machining
parameters on the performance characteristics in the EDM process of
Al2O3+TiC mixed ceramic,’ International Journal of Advanced
Manufacturing Technology, vol.37, pp.523–533. DOI 10.1007/s00170-
007-1002-3.
38. Lin JL & Lin CL 2002, ‘The use of the orthogonal array with grey
relational analysis to optimize the electrical discharge machining
process with multiple performance characteristics’, International
Journal of Machine Tools & Manufacture, vol. 42, no.2, pp. 237–244.
40. Luis, CJ, Puertas, I& Villa G 2005, ‘Material removal rate and
electrode wear study on the EDM of silicon carbide’, Journal of
Material Processing Technology, vol.164, no.165, pp.889–896.
55. Oguzhan Yilmaz, M& Ali Okka 2010, ‘Effect of single and multi-
channel electrodes application on EDM fast hole drilling performance’,
International Journal of Advanced Manufacturing Technology, vol.5,
pp.185-194.
60. Philip Ross, J 2005, ‘Taguchi Techniques for Quality Engineering’, 2nd
Edition, Tata McGraw Hill.
153
76. Tzeng YF& Chen FC 2003, ‘A simple approach for robust design of
high-speed electrical discharge machining technology, ‘International
Journal of Machine Tools Manufacturing, vol.43, no.3, pp.217–227.
81. Vikas, Shashikant, Roy, AK & Kaushik Kumar 2014, ‘Effect and
Optimization of Machine Process Parameters on MRR for EN19 &
EN41 materials using Taguchi’, 2nd International Conference on
Innovations in Automation and Mechatronics Engineering, vol.15,
pp.204 – 210.
155
83. Wong, YS, Lim, LC& Lee, LC 1995, ‘Effect of flushing on electro-
discharge machined surfaces’, Journal of Material Processing
Technology, vol.48, pp.299–305.