Escolar Documentos
Profissional Documentos
Cultura Documentos
Touch Panel
PPI
HumiTherm Ultra
Features
Ÿ 4.3" or 7" TFT, 65536 Color Touch Screen Display Ÿ Standby Sensors & Control Gadgets Interface
Ÿ Accurate Temperature & Humidity Monitoring (Optional Analog Inputs & Digital Outputs)
(Universal Input : RTD Pt100, mA, V) Ÿ Date / Time Stamped Process & Event Data Recording
Ÿ 8 (4T + 4RH) or 16 (8T + 8RH) Channel Temperature & Humidity Ÿ Boiler (Steam Generator) Water Level Monitoring
Mapping (Optional, Add-on Module) (Digital Input for Float Switch & Thermostat)
Ÿ Precise Temperature & Humidity Control (Independent Self-Tune Ÿ Password Protected Door Opening & Status Monitoring
PID Control) (Digital Input for Door Switch & Digital Output for Door Lock
Water Level Low, Mains Fail) Ÿ Mains-Fail Detection & Automatic Change Over to Battery /
Inverter
Specifications
Display
Type 4.3” or 7” TFT Color Display with Touch Panel
Viewing Area 90.04 X 52.86 mm for 4.3” & 152.4 X 91.5 mm for 7”
Resolution 480 X 272 pixels for 4.3” & 800 X 480 pixels for 7”
Touch Type Analog Resistive Film
Touch Life Greater than 1 Million Operations
Analog Inputs
1 or 2 Analog Inputs for Main & Standby Sensor.
Temperature RTD Pt100, 3 wire
(User Programmable) DC Linear : 0-20 mA, 4-20 mA
0-5 V, 0-10 V, 1-5 V
1 or 2 Analog Inputs for Main & Standby Sensor.
Humidity (%RH)
DC Linear : 0-20 mA, 4-20 mA
(User Programmable)
0-5 V, 0-10 V, 1-5 V
RTD Pt100 : ± 0.25% of reading ± 1°C
Accuracy
DC Volts/Current : ± 0.25% of reading ± 1 LSD
Digital Outputs
Type SSR Voltage Drive rated 12 VDC @ 40 mA, Short-circuit Protected
Ÿ Rear Panel Digital Input (DI-3) for Connecting Remote Alarm Acknowledge
Alarm Acknowledge (Mute) Button
Ÿ Touch Button on HMI Main (Home) Screen
Heat Control
Type Self Tune PID
Control Parameters Proportional Band, Integral Time, Derivative Time, Cycle Time
Output SSR Drive Voltage (DO-2 & DO-5)
Humidity Control
Type Self Tune PID
Control Parameters Proportional Band, Integral Time, Derivative Time, Cycle Time
Output SSR Drive Voltage (DO-3 & DO-6)
Compressor Control
Type On-Off with Programmable Time Delay & Hysteresis
1. Can be Switched ON-OFF Manually
Control Strategy 2. Based on Programmable Temperature SP Threshold. Compressor
(Programmable) is ON for Temperature SP Below Threshold & OFF Above
3. Cool Control. Switches ON-OFF Based on Temperature PV & SP
Output SSR Drive Voltage (DO-4 & DO-7)
Data Recording
Storage Device In-built Flash Memory
Record Capacity 5,000 Records
Recording Interval User Programmable (1 to 250 Minutes)
Process Values
Ÿ Measured Temperature Ÿ Measured Humidity
Events
Ÿ Power-up, Ÿ Process Value Alarm Toggle
Ÿ Change in Temperature SP, Ÿ Change in Humidity SP
Recording Data Ÿ Change is Date/Time Settings,
(Date/Time Stamped) Ÿ Change in Recording Interval
Ÿ Chamber Door Open/Close, Ÿ Boiler Water Level Low
Ÿ Mains Power Fail/Resumption Ÿ Change - over from Main to Standby
Sensor Set
Ÿ Change - over from Main to Standby
Control Gadget Set
Power Supply
Type Switch Mode (SMPS)
Supply Voltage 24 VDC @ 1.1A (25 Watts) HMI + Micro PLC
Physical
Mounting : Plug-in with Panel Mounting Clamps
4.3” HMI Overall Dimensions : 128 (W) X 102 (H) X 55 (D), mm
Panel Cutout : 121 (W) X 95 (H), mm
Compressor
Humidifier
Heater
Compressor
Humidifier
Heater
Thermostat
Water Level
Thermostat
Water Level
Alarm ACK
Power Fail
Door Open
Standby Main
Digital Inputs
Main Standby
Mapping Module
PPI
55
UniMap
B
mV / V
mV / V
4 / 8 Points
mA
mA
RTD
A1 A2 A3
B1 B2 B3
%RH
°C
Sr. No.:
ProcessPrecisionInstruments(AnISO9001:2008Company)
101,DiamondIndustrialEstate,Navghar,VasaiRoad(E),Dist.Palghar-401210,Maharashtra,India
0250-2391722/33/37/420250-2391734sales@ppiindia.net www.ppiindia.net