Escolar Documentos
Profissional Documentos
Cultura Documentos
Herramientas:
1. Descargue el firmware del sitio web de Teclast de acuerdo con su ID de producto
2. teclado USB
3. 2PCS USB Flash de hasta 16GB
4. HUB USB con adaptador
5. Cable tipo C (solo para Android)
Nota: Si solo instala Android, no es necesaria la herramienta mencionada en 2,3 y 4.
Pasos de funcionamiento:
1. Cómo instalar el sistema operativo Android
1.1 Instalar iSocUSB-Driver-Setup-1.2.0.exe
1.2Instale IntelAndroidDrvSetup1.5.0.exe
1.3Instale PhoneFlashTool_5.3.4.0_internal_win32.exe
Consejos :
a. Por favor siga los pasos estrictamente.
si. Siga la ruta de instalación predeterminada.
C.En el escritorio encontrará una marca igual que:
1. Actualiza Android
2.1 Abra "Phone Flash Tool" y haga clic en "Navegador". Busque el "flash.json" de la carpeta del
firmware y ábralo.
2.4 Conecte la tableta con la PC con un cable tipo C. Verá "Comenzar a flashear" en la
herramienta de flash del teléfono si la conexión es exitosa.
2.5 Click “Start to Flash”
2.6 Please wait patiently and DO NOT remove the tablet from the PC.
2.7 The tablet will automatic rebooting after the upgrade finished 100% .
Disconnect the tablet from PC .
Restablezca la tableta mediante la
2.8
¡Hecho!
3. Recupere Android (de esta manera se usa cuando la tableta no puede encenderse y eliminará
el sistema operativo Windows)
3.1 Abra "Phone Flash Tool" y haga clic en "Navegador". Busque el "flash.json" de la carpeta del
firmware y ábralo.
3.2 Después de elegir “flash.json”, cambie la “Configuración” a “recuperar” igual que la imagen:
3.3Power off the tablet and press power&VOL+&VOL- (or power&VOL-)until the screen appears
“DNXFASTBOOT MODE...”
3.3 Apague la tableta y presione encendido y VOL + y VOL- (o encendido y VOL-) hasta que
aparezca la pantalla
"MODO DE ARRANQUE DNXFAST ..."
4.1 Insert the one of USB flash into PC .Format the removable disk to FAT32 and name it WINPE
4.2Unzip the “WinPE_(U).rar ”files and copy all of the them into the USB flash .
Charge the name of the other USB flash to “WINPE” and format it to “NTFS”. Un-zip the
Win10_RS1(images) and copy it in to this USB flash.
4.3Turn on your tablet and enter Windows OS .
4.5Connect the tablet ,2 USB flash , keyboard together with the USB HUB .
4.6Turn on the tablet ,quickly and continuously press the” Delete” button on the keyboard as
soon as you see the teclast logo .then you will get the following:
Done!
C:\Users\MahonriArana\Downloads\TbooK16Power(M5F8)\Android_V1.01_SZ\upgradetools\Int
eldroidDrvSetup1.5.0.exe