Escolar Documentos
Profissional Documentos
Cultura Documentos
Magnum
Industry
NOVEMBER 8
MAGNUM INDUSTRY
Authored by: Afridi Ansari
1
ACKNOWLEDGEMENT ;
Firstly , we had a visit to Magnum Beverages Foods PVT LTD
located near Bokul , Dibrugarh on dated – 8 november, 2019 at 11
a.m. by our Dibrugarh Polytechnical Faculty. I had a view how
drinking water bottles are manufactured and packed.
kinds of machines were used such as –
Auto Stretch Blow Forming Machine .
Rinser Filler Capper
Others
Raw material used there was named as PREFORM.
Firstly , I saw their an Auto Stretch Blow Forming Machine.The
Preform which is typically pre-heated gets installed on the Auto
Stretch Blow Forming Machine by workers which is then transferred
within the machine to the station where it gets stretched in the axial
direction and blown into bottle shape which then gets ejected from the
machine.Then I saw workers installing those bottles on a machine
named as Rinser Filler Capper machine which runs at 60-90
B.P.M.(Beats Per Minute).Rinsing empty bottles before moving onto
the filling station is an incredibly important step because it helps
prevent contaminated product from being distributed. From there, the
Filling of product is put into each bottle to maintain brand
consistency. And the last step, the Capper, needs to create a reliable
seal on the bottle to make sure that liquids do not leak and a
highquality end product is delivered to each consumer. Failure to
clean, fill, or seal bottles properly could lead to potential recall and
wasted product, which can cost the company a great deal.When I
asked one of the staff member of the company that how much water
bottle they produces per day they answered that they produces approx.
15000 bottle per day.
2
Fig : Stretch Blow Forming Machine
3
Fig : Rinser Filler Machine
4
ION EXCHANGE PROCESS FOR WATER
TREATMENT -