Escolar Documentos
Profissional Documentos
Cultura Documentos
A B
010111_W4_E-5PS03_e
03.2019
1/ 6
Proportional directional valve 010111_W4_E-5PS03_e | ValveTech
Technical data
Hydraulic Operating pressure max.: 315 bar
port T: 75 bar
summated pressure A, B: 350 bar
Flow rate: 1, 3, 5 l/min at Δp = 7 bar
Flow direction: see symbols in type code
Hydraulic fluid: mineral oil according to DIN 51524,
other hydraulic fluids upon request
Viscosity range: 10 - 350 cSt
Filtration: oil cleanliness according to ISO 4406 (1999)
18/16/13, filter with β 5(c) > 200
Repeatability: < 3 % with optimized PMW-signal*
Hysteresis: < 5 % with optimized PMW-signal*
* at 20 % to 100 % of the nominal valve current
2 / 6
ValveTech | 010111_W4_E-5PS03_e Proportional directional valve
Performance
Flow rate diagram (Q/I) W4_E-5PS03 at Pressure drop diagram (Δp/Q) W4_E-5PS03 at IN
Δp = 7 bar
7 8 1 3
Q [l/min]
Δp [bar]
6 5
5
6
5
4
3 4
3
2 1
2
1
0 0
0 20 40 60 80 100 0 1 2 3 4 5 6
IN [%] Q [l/min]
NOTE Maximum tolerance of flow rate ±10% at symmetric flow. Maximum pressure drop
at control edge Δp: 20 bar.
3 / 6
Proportional directional valve 010111_W4_E-5PS03_e | ValveTech
1 2 3 4
1 2 3 4
Dimensions Maßstab 1:1,35
Maßstab 1:1,35
A
A
Electric plug acc. to
DIN EN 175301-803
(formerly DIN 43650)
shape B
39
39
12
12
B
B 51,5 30,2
51,5 30,2
141,9
DIESE VORLAGE IST GEHEIMZUHALTEN. FUER DEN FALL DER ERTEILUNG EINES SCHUTZRECHTES BEHALTEN WIR UNS ALLE RECHTE VOR.
141,9
PATENT. WIR UNS ALLE RECHTE VOR.
Maßstab 1:1,35
Maßstab 1:1,35
24 13,75
C 24 13,75
C 12
12
THE GRANT OF ABEHALTEN
T T
T T
THIS DOCUMENT IKS CONFIDENTIAL. ALL RIGHTS RESERVED IN THE EVENT OF THE GRANT OF A PATENT.
o25
26
15
19
B A
o25
26
15
19
B A
SCHUTZRECHTES
P
P
D
OF
D
EINES
NOTE The valve must be mounted with fitting screws according to DIN EN ISO 4762
RESERVED
M4 x 30 - 12.9. Installation torque: 2,2 ± 0,2 Nm, screw-in depth min. 7 mm.
NOTE For the appropriate mounting plates, see our „accessories“ in the appendix or
DEN FALL
contact us.
RIGHTS
E
E NOTE For a detailled drawing of the port pattern please DATE see30.11.2017
DATUM
chapter 11 „general
AEND.-NR.
informa-
FUER
MOD. NO.
DATUM
tion“ under the category „port patterns“ or our online 30.11.2017
catalogue at
AEND.-NR.
CONFIDENTIAL. ALL
P. J. www.weber-
NO. 16.03.2018
GEZ. AEND.-DATUM
DATE
DRAW. MOD.
MOD. DATE
V20
MATERIAL
ISO 13715 DRAWING NO.
HM3 / 17 48 05
KANTEN / EDGE
F ISOca. 13715
ZEICHN.-NR.
THISVORLAGE
GEWICHT
0.616 kg ENTSTANDEN AUS
DRAWING NO. ERSATZ FUER
/ TITLE0.616 kg
GEWICHT ca. ENTSTANDEN AUS ERSATZ FUER
BENENNUNG
WEIGHT approx. DERIVATE FROM ART.-NR. / PART
REPL. FOR NO.
W43E-5PS03-**N-01-***-*** siehe
BENENNUNG / TITLE
Tabelle ART.-NR. / PART NO.
Type code
- 5 PS03 - - 01 - - -
Series Revision
Mounting interface
Mounting plate
FT (steel), PS03
size 03
A B
DA a
P T
A B
DB b
P T
A B
N a b
P T
A B
NA a
P T
A B
NB b
P T
5 / 6
Proportional directional valve 010111_W4_E-5PS03_e | ValveTech
NOTE For the appropriate electronic controllers, see chapter 6 „electronics and sensors“
as well as our online catalogue at www.weber-hydraulik.com.
Manual Information regarding installation, set-up and maintenance can be found in our
catalogue in chapter 11 under the category „general operating manual“ or will be
provided upon request.
6 / 6