Escolar Documentos
Profissional Documentos
Cultura Documentos
INTRODUCTION
00A17.01
DCM Sistemes is a company widely recognized for its machine vision illumina-
tion systems. Founded in 1999, DCM Sistemes products have enabled machi-
ne vision to perform quality controls reliably through optimal lighting to ensure
readability. DCM Sistemes is continuously developing new products which are
designed with practical, cost-effective technologies. You can find us at:
DCM SISTEMES
Pol. Ind. ‘El Oliveral’
c/x 46190 - Ribarroja del Turia,
Valencia (SPAIN).
T. (+34) 96 166 65 27
F. (+34) 96 166 65 24
Email: info@dcmsistemes.com
www.dcmsistemes.com
DCM Sistemes LED lighting systems comply standards described below for gua-
ranteeing you the good quality of our products, which are also classified accor-
ding the international protection rating.
02
CONTENT
INTRODUCTION
00B17.01
INTRODUCTION 2 ACCESSORIES 86
iBLUEDRIVE TECHNOLOGY 97
LIGHTING SYSTEMS 16
ALS SERIES - Diffuse ringlights 22 Z1.2 - CONTROL INPUT NPN/PNP for ’type C’ lighting systems 100
of DOL, PLC, PLX, PRH series, PRC0604C and PRC0606B.
ALU SERIES - Ultra diffuse ringlights 24
Z1.3 - iBLUEDRIVE CONTROL INPUT WIRING 101
ALW SERIES - Low angle ultra-diffuse ringlights 26
Z1.4 - iBLUEDRIVE INLINE 101
AUB SERIES - Borescopic lights 28
Z2.1 - MODIFIERS LEGEND 102
BKC SERIES - Cylindrical backlights 30
Z2.2 - ACCESSORIES LEGEND 102
BKK SERIES - IP69K area backlights 32
Z2.3 - iBLUEDRIVE ACCESSORIES LEGEND 102
BKL SERIES - Area backlights 34
Z2.4 - TECHNICAL DRAWINGS LEGEND 102
BKM SERIES - Customizable area backlights 40
Z2.5 - COLOURS & WAVELENGTHS LEGEND 102
BKN SERIES - Linear backlights 42
Z2.6 - TYPES OF LIGHTING LEGEND 102
DKL SERIES - Darkfields lights 44
Z2.7 - TYPES OF LIGHT LEGEND 102
DOL SERIES - Linear dome lights 46
Z3.1 - CHOOSING THE CORRECT ILLUMINATION 103
DOM SERIES - Dome lights 48
Z4.1 - ACCESSORIES & MODIFIERS OVERVIEW 105
DTL SERIES - Transmitted dome lights 52
00C17.01
Therefore, we encourage you to call our engineers to discuss your needs, so that
we may work with you in creating your best imaging solution.
u DCM Sistemes presence
DCM Sistemes attends anually to the most important trade fair for machine vi-
sion at Messe Stuttgart. Here we present all our novelties of the year and the fu-
ture projects in progress.
DCM Sistemes is convinced of the importance of keeping directly in touch with
its clients and other users of machine vision.
It is a good opportunity for you to know us and our products.
u Our services
DCM Sistemes aims to offer industry leading service. For that reason, our exten-
sive technical knowledge is available to our customers and extends to provide
advice before and after purchase, feasibility studies, competent and knowled-
geable support. Our commitment includes the following:
04
IMAGING & DCM SISTEMES
INTRODUCTION
00C17.01
u Applications ’Bright field’ refers to any illumination where the light rays from the source could
be reflected directly into the lens, which will depend on its angle of view. ’Dark
Imaging technology is a cost-effective way to implement automatic quality assu- field’ illumination refers to light that would not enter the lens when reflected.
rance and control and is used in many different areas of application. Vision
allows 100% monitoring and therefore strengthens the competitive edge of tho- FRONT Camera axis
se companies that use it, even at highs speeds and with stringent conditions. LIGHTING
Some of the applications and markets we serve are the following. Consult others: OBJECT
BRIGHT FIELD
Food processing & inspection Product inspection & measurement DARKFIELD
BACK
LIGHTING
WAVELENGTH OF LIGHT
Colour of the light that illuminates the object. Apart from the visible spectrum, ul-
traviolet and infra-red light can reveal specific features on or in the work piece to
be inspected.
LIGHT TYPE
The quality of light is determined by its structure. For illumination to be useful it
needs to light the scene as evenly as possible, that makes the image analysis be
easier and faster.
3cm
80.0 - 100%
60.0 - 80.0%
DCM Sistemes
40.0 - 60.0% provide distribution
graphs to show how
our lights perform
20.0 - 40.0% and to enable a
u Illumination for machine vision systems reasoned choice
between different
0.0 - 20.0%
types of light.
Illumination is the most important part of an imaging system and its importance
is often underestimated in many vision applications.
Direct light has an uninterrupted trajectory between the source and the tar-
Lighting conditions need to be optimised because cameras are much less ver- get. Indirect light uses a translucent diffuser which softens and disperses
satile than the human eye and, that way, they can detect objects that the human the illumination. The difference between diffuse and ultra-diffuse light is the
eye can see in uncontrolled conditions. lighting source. While diffuse light uses a not uniform lighting source, the ul-
tra-diffuse one is completely homogeneous, creating a more even illumina-
Cameras see the light reflected from the objects. By controlling the illumination, tion, ideal for brightnesses.
we also control how objects appear to the camera. For example, light is reflected
differently from a coin than from a flat white label and thus different lighting
DIRECT
techniques are required.
Diffusing material
Optimising the lighting can often eliminate the need for costly and time consu-
ming image manipulation. Choosing an unappropriate illumination could deter- DIFFUSE
mine if a system works reliably or does not.
Diffusing material
ULTRA
DIFFUSE
u Factors affecting lighting
The angle at which the light falls on the object (lighting zones), is probably the
most important factor of illumination. The angle of incidence is determined by OPERATING MODE
the plane of the camera. Illumination usually needs to be controlled in some way. Lights can work in a con-
’Front lighting’ and ’backlighting’ are the two principal lighting areas. In the first tinuous mode or can be strobed or powered or, the intensity can be raised or lo-
one, the light originates from the same side as the camera. In the second one, wered. Multiple illumination options are allowed in our lamps.
the light is situated behind the object. (extended information at operating modes section on page 8)
00C17.01
u Monochromatic light
Subtractive system Additive system The monochromatic light is the one that has a single wavelength corresponding to
(pigment colors, printed inks, etc.) (light colours, screen, etc.) each colour. It is normally used in monochrome cameras. Very useful to highlight
some specific features, since each color provides better visibility in certain as-
pects or by contrast, since all opposite colors are absorbed.
There are many universal classifications of color spaces but, when referring to
artificial vision, the main mode is the RGB, a mix of red, green and blue that
constitutes the primary colors that are used by cameras, PCs and screens and,
which in combination, can create almost any colour in the visible spectrum.
When light falls into an item, its surface absorbs some wavelengths and reflects DCM Sistemes logo illuminated DCM Sistemes logo illuminated
other. The reflected wavelengths are those which the human eye captures and in- with white light. with red light (R).
terprets as different colors, according to the correspondent wavelength. The whi-
te light is the overlapping of all colors of visible spectrum.
The colour cameras emulate the function of human eye by using a matrix compo-
sed of sensors which capture different ranges of the visible spectrum. Usually, DCM Sistemes logo illuminated DCM Sistemes logo illuminated
they use three ranges, red (R), green (G) and blue (B). Later, they group all infor- with green light (G). with blue light (B).
mation obtained by the sensor in one pixel with three values Red-Green-Blue.
Illumination for machine vision uses all this to its advantage in order to reveal The ultraviolet and infrared light, although
certain characteristics about a particular object. The vision is then, the ability to outside the visible spectrum, they are
detect light and interpret it. both very useful to inspect materials or
contrasts of colour differences not very
Of the entire electromagnetic spectrum, the visible part to the human eye is very apparent, since this light is based on dif-
small and comprises wavelengths between 380nm and 760nm or so, although ferences in composition planes.
it may vary depending on the person.
Besides the visible spectrum, is important to consider the ultraviolet light and in-
frared light, because they can be useful for some other characteristics of the ob- Ultraviolet light is generally used on surfaces that react to this light by returning
ject of inspection. Cameras have a different spectral response than it has the hu- a longer wavelength light than it is UV, which is called fluorescence and that is
man eye and therefore, they are sensitive to them. what the camera captures. (See picture)
u RGB light
VISIBLE SPECTRUM
The RGB color model is based on additive synthesis. With this synthesis it is possi-
ble to represent a color by admixture of the three primary light colors red, green
MICROWAVES
and blue. Usually used in monochrome cameras, to change the contrasts bet-
GAMMA X-RAYS UV IR RADIOWAVES ween colors, or RGB cameras to generate structured light colored, very useful in
RAYS
cases of weld inspection or to adjust colour temperatures.
u White light
LUMINISCENCE(%)
06
TYPES OF LIGHTING
INTRODUCTION
00D17.01
u Types of lighting
00E17.01
u DCM Sistemes operating modes Generally used in inspections that can have long integration times, those that
do no require continuous inspection, for example, depalletizing applications or
Most illumination needs to be controlled in some way, whether it be simply tur- not in-line assembly verification.
ning the light on and off, or controlling how intense the illumination is. Powered mode
DCM Sistemes lighting systems are classified in four types according to their wor- Advantages Higher power, lower consumption and longer lifespan with easy
king specifications, which helps to recognise which kind of control is needed: control and no pricing increase.
Disadvantages They need a control of switching on/off and have less power than
Continuous (Type C). No control needed. strobe lamps.
Powered (Type P)
Strobe (Type S)
Intelligent (Type i). iBlueDrive technology. u Strobe
Intelligent mode corresponds to iBlueDrive technology, a new generation of ligh- Strobing is the technique of activating a light for a short period of time in order to,
ting systems that integrate the strobe controller inside, so that operate in all among other, the followings:
three working modes swicthing automatically.
HIGHER INTENSITY
More current pass through the leds than it is allowed in continuous operation.
u Continuous
The output intensity increases considerably, but it can only be sustained over a
short period of time, because if this were done constantly, the light would run
It has no operation time limitation (Ton max.) nor duty cycle limitation (D max.).
hotter, reducing its life.
Used in linear cameras or applications that do not need intensive illumination
+ Light
and require continuous inspection with long exposure times. intensity
Corresponds to DCM Sistemes Type C lamps.
+ Operating
Time ON
Continuous
Light
intensity PROLONGING THE LIFE OF THE LIGHT
All light source has a finite life span which can be dramatically extended by acti-
vated them only when required. Leds can be switched on and off very rapidly
with little time delay or energy loss.
FREEZING MOTION
This technique is often used in vision to capture images of objects moving past
the camera at speeds that would normally cause motion blur. Strobing needs to
100% be synchronised with the objects to be inspected so that the camera is triggered
0 at the same moment as the pulse of light.
Operating time
INTENSITY CONTROL
Continuous mode
Sometimes, for better meeting the requirements of the application we need to
Advantages Easy installation
create the optimum lighting conditions by adjusting or balancing the intensity of
Disadvantages Higher consumption, lower illumination the illumination, and this will usually involve the use of a lighting controller. The-
re is a range of situations where this may be useful.
u Powered This mode consists of short trigger pulses at high rate with high intensity.
This mode operates the same manner as the continuous mode does, but the in- Used in continuous inspections with short integration times at high speeds,
tensity is higher and, consecuently, to ensure operation, the switching on/off by such as an inspection in-line production or a high speed inspection which re-
an external commutator is necessary. quires a large amount of illumination.
Corresponds to DCM Sistemes Type P lamps. Corresponds to DCM Sistemes Type S lamps.
Powered Strobe
Light Light
intensity intensity
800%
200%
0 0
Operating time Operating time
08
OPERATING MODES & DCM SISTEMES TYPES OF LAMPS
INTRODUCTION
00E17.01
u Intelligent (iBlueDrive) DCM Sistemes lighting systems are identified with the letter of their operating
mode at the end of the order reference.
Lighting systems with iBlueDrive technology detect the input signal and ope-
rate in the appropriate mode according to the control signal. These systems Excluding iBlueDrive lighting systems which are capable to operate in various
also switch from continuous to strobe automatically. modes, our lamps are firstly designed to work in a particular mode, but they can
work in others if adapting their working specifications to more restrictive ones.
Corresponds to DCM Sistemes Type i lamps. This means, for example, that a Type C lamp (continuous operating mode) could
be strobed or powered as the working specifications of these modes remain wit-
Light hin its operating range. The same way, a Type P lamp (powered operating mode)
intensity could be strobed by limiting the operating time and the duty cycle.
800% The inverse adaptation would also be possible by lowering the supply voltage
and therefore the lighting systems power for adapting the average power con-
sumption to the maximum duty cycle allowed. Continuing with the previous
example, a Type P lamp (powered operating mode) could also work as a conti-
nuous if the power is lowered to ½.
200% DCM Sistemes lighting systems have a strong versatility and are able to work in
100% many environments. Consult our technical engineers for extended information
0 or doubts about the operating modes.
Operating time
Do they operate in YES, maintaining the YES, maintaining the YES YES
strobe mode? power intensity power intensity
Order reference Add C at the end of Add P at the end of Add S at the end of Add i at the end of
the order reference the order reference the order reference the order reference
00F17.01
u What is iBlueDrive technology? iBlueDrive technology integrates in one device all advanced functions of a stro-
be controller. This allows us to have extended information about lamps opera-
DCM Sistemes has made a complete effort in R&D for offering you a wide ran- tion and, therefore, to self-protect the device against misuse.
ge of intelligent LED lighting systems for machine vision, amazingly easy to
use, as powerful and versatile as never before. STROBE INTEGRATED
The iBlueDrive lighting systems incorporate all functions of an advanced strobe
controller. As it is integrated next to LEDs, more information and higher respon-
se speed is obtained giving rise to a better control.
AUTOMATIC SWITCHING
Lighting systems with iBlueDrive technology detect automatically the input sig-
nal and set its maximum input power according to the operating mode, no mat-
ter if it is strobe, powered or continuous mode, being unnecessary to configure
or change anything in the device.
Operating modes:
CONTINUOUS
STROBE DIMMED
ALB0810A-630i CONTINUOUS
Our engineering and R&D department has designed an advanced strobe con-
troller of 48x15x5mm, which will be incorporated directly into our iBlueDrive
Automatic swichting of
lighting systems, eliminating the need for external strobe controllers and sim- POWERED operating modes. This
plifying its use. way, you will be able to
operate in strobe mode
iBlueDrive technology LED lighting systems mean an unprecedented techno-
with the same device,
logy innovation in industrial lighting. With this technology you will forget about just as easily as you do
synchronisation or even which type of lamp your application will need, having all in continuous.
types of lamp available in one single device easy to use.
INTELLIGENT PURCHASE
LEDS TEMPERATURE
information With iBlueDrive devices you will save implementation costs both programming
and installing. Moreover, an iBlueDrive system is more economical than a con-
ventional equivalent system plus its strobe controller.
ADVANCED
STROBE + INFORMATION
CONTROLLER Connecting the lamp to the computer will provide you with advanced information
such as: serial number, order reference, current operating mode and its status,
iBlueDrive power voltage or driver and device temperature. You will also be able to configu-
DRIVER re parameters as the pulse width, the dead time after shooting or the output po-
wer among others.
u iBlueDrive power
VOLTS
Devices specially designed with iBlueDrive technology have an active intelli-
DRIVER TEMPERATURE gent driver which allow us to control temperature and charges, obtaining, wit-
information hout risk of damage, more compact devices with the maximum power availa-
ble depending on the operating mode.
All this with an unique rapidity, shorter ignition delays and simplifying
synchronization with cameras in strobe mode.
+ LIGHTING POWER
The active intelligent control system allow us to control the charges and tempe-
ratures, avoiding dissipators without risk of damages caused by over tempera-
ture and offer the maximum power available depending on the operating mode.
u iBlueDrive intelligence
+ FLEXIBLE
iBlueDrive technology operates with a new intelligent working mode 'mode i',
which allows the automatic switching between continuous and strobe lighting. iBlueDrive is not a closed system. When purchasing an iBlueDrive device you
This way, you will be able to operate in strobe mode with the same device just as are actually purchasing an intelligent device with upgradable firmware that can
easily as you do in continuous. evolve with future new features.
10
iBLUEDRIVE TECHNOLOGY
INTRODUCTION
00F17.01
BU
LIGHT
0V Connecting lamp to the computer (ibluedrive box required), you will be
RD
24VDC able to configure:
00G17.01
DCM Sistemes has a wide range of standard products. Starting from the type of lighting (angle of illumination) and the type of light, here is a complete classification of
DCM Sistemes products and all parameters involved when selecting.
There are considerations that give us useful information to determine which type of illumination is best for a particular job, making this duty easier. This will determine
which light is best suited to an application.
u 1. Type of lighting
RADIAL LOW ANGLE BACK-LIGHT DOME
u 2. Type of light
Combination of two independent
DIRECT lighting types that can work
Reaches directly the together or separately.
object producing ma-
ximum contrast.
ALD SERIES ALB SERIES
DKL SERIES
DIFFUSE
SAR SERIES
Softens and disper-
ses the light, illumi-
nating evenly.
ALS SERIES ALB SERIES
BKL SERIES
ALW SERIES
ULTRA-DIFFUSE
AUB SERIES
Very diffuse illumina-
tion, for even more
reflecting surfaces. DTL SERIES
BKM SERIES
BKC SERIES
ALU SERIES
BKN SERIES
Main type of lighting (angle of illumination) and light type of each series. Other possibilities allowed by adding accessories or modifiers. Consult on each series’ datasheet
where you could find extended information.
u 3. Colour (wavelength)
NON-VISIBLE:ULTRAVIOLET VISIBLE LIGHT NON-VISIBLE: INFRARED OTHERS
W00 = WHITE
RGB
u 4. Operating modes
CONTINUOUS POWERED STROBE INTELLIGENT (iBLUE)
Type of lamp Type C Type P Type S Type i
Maximum time ON (Ton max) œ 60s 2ms Automatic
Maximum duty cycle (Dmax) 1 ½ ½0 Automatic
Light intensity 100% 200% 800% 100% to 800%
Prevent thermal limitations. Switching Used with a strobe controller. Detect the input signal
ON/OFF is necessary. and operate in the appro-
priate mode according to
POWER POWER STROBE the control signal.
SUPPLY SUPPLY
12
ILLUMINATION OVERVIEW
INTRODUCTION
00G17.01
u Lighting environment
DCM Sistemes lighting systems have been designed to operate over a long period of time with a minimum of maintenance. They are perfectly adapted to industrial envi-
ronments and all of them comply with standards, offering ecofriendly and safe products. Continuous satisfactory operation depends upon care and regular cleaning.
PRD SERIES
PLC SERIES PRC SERIES PRK SERIES PRY SERIES PRL SERIES
PLA SERIES
PLC SERIES
BKL SERIES
PRA SERIES
SAX SERIES
SAC SERIES
SAR SERIES
SAL SERIES
BKM SERIES PLU SERIES PRC SERIES BKK SERIES PRL SERIES
u 5. Modifiers u 6. Accessories
Prior to manufacturing optional modifications in standard lighting systems. Supplementary complements for DCM Sistemes led lighting systems.
They must be indicated at the end of the product’s order reference.
Description Series
Description Code
Power cable/s VCB, VCC, VCD
Narrow angle of emission /AN
Interconnection & programming cable/s VCU, VCL
Medium angle of emission (by default) /AM
Strobe and RGB controller/s VST, VSC
Wide angle of emission /AW
Polarizer filter VPF, VPC
Oval angle of emission = 23-24º (x) / 17-18º (y) /AO
Diffuser filter VDF
D Diffuse emission /AD
X Y XY Collimater filter on x/y/xy axis VCF
Polarizer filter /FPL
Darkfield converter VRF
Diffuser filter /FDR
Protector filter VPT
CC1 Dome hole of 46mm /CC1
Fixing bracket VBA, VBB, VBC
CC2 Dome hole of 40mm /CC2
Dissipator VHD
IP67 IP Rating = IP67 /67
iBlueDrive technology accessories VTA
PNP PNP input model /P
00H17.01
TYPE OF LIGHTING
iBlueDrive accessories3
iconography legend for extended
information.
u
Lighting model BKL0303A BKL0504B BKL0505A BKL0705B BKL0707B BKL1007B
1.4W 2.4W 3.1W 4.3W 6.4W 7.9W -470C
TYPE C
24VDC
1.3W
1.1W
1.6W
2.4W
3.1W
3.8W
2.9W
2.4W
4.2W
3.1W
4.8W
3.5W
-525C
-630C
MAX. INSTANTANEOUS
1.1W 2.6W 5.3W 2.4W 3.8W 4.8W -880C CONSUMPTION
TECHNOLOGY 1.1W
1.6W
2.6W
2W
5.3W
3.1W
2.4W
4.3W
3.8W
6.4W
4.8W
7.9W
-940C
-W00C
TYPE P No ’Type P’ standard LED lighting systems in this series
NOTES
BKL14.01
BKL SERIES
IDENTIFICATION ICON
(x2)M4 6
40
2.5 8 8.5
52
Identifies which type of information you
CONNECTOR
22
4 7 17
will find in that section
12
30
19
50 19 55
30
17
34 20 8.5
27.5
19
THEORETICAL
8 2
(x2)M4 6 9.5 2.5 8
INFORMATION
40 (x2)M4 6 4.75
22
POWER
CONNECTOR
y y
LED LIGHTING
x
DOL0250A-E01A
x
DOL0250A-E01A
SYSTEMS
(x2)M4 6
aA ACCESSORIES
(x4)M4`6
(x2)M4 6
(x2) Filter mount points
8 14.5 10.5 10 22
62 4.75 11.5
2.5 2.5 8.5
25
22.5
13
25
19 30 ADDITIONAL
19
50 55 75 70 75 30
INFORMATION
33.5
22.5
R3
50 11.5 8 R7 7
(x2)M4 6 5.5
50 11.5 10
22 (x4)M2 5 75
POWER
CONNECTOR POWER
CONNECTOR
y y
x x
DOL0250A-E01A DOL0250A-E01A
(x2)M4 6
(x4)M2 5
(x4)M2 5 (x2)M4 6
3.5 17 22 (x4)M4 6
3.5 17 70
10 4 4
70
26
26
40
25
100 107 55
70 77 25
15.5
15.5
ADDITIONAL INFORMATION 35
26
50
26
8 8 3.5 11 8 89
22 10
(x4)M4 6
3.5 POWER
POWER CONNECTOR
y
TECHNICAL DRAWINGS
of use samples, brightness distribution or x
DOL0250A-E01A
x
DOL0250A-E01A
Example of BBB captured image Brightness distribution of DCM0005A-630C@165mm DCM0005A-630C light intensity.
14
HOW TO USE THIS CATALOGUE
INTRODUCTION
00H17.01
Composed by two or three parts. The two main parts are marked in each product Prior to manufacturing optional modifications in standard lighting systems.
datasheet with gray frames to identify them easily. Only add the third when orde- Available only in some lighting models.
ring modifiers or when the lighting system has an aperture angle .
(example): ALD0707A-630C/FPL
Dissipator VHD
17
RADIAL
LIGHTING LED LIGHTING SYSTEMS
ALB17.01
Inner O
Dimensions 94.5x77x16.5 94.5x77x16.5
40 40
RWD (mm) >50 >50
Weight 120g 124g
IP rating IP40 IP40
Mounting holes (x2)M4`5 (x2)M4`5
Connection 3P aerial male connector. No
L=150mm
PIN 1= +24V
PIN 2= 0V
PIN 3= Control
Power cable (Not-included) VCC Series No
Modifiers2 D D
Accessories3
iBlueDrive accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (3) Accessories are not-included. More information in accessories section.
respectively. (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
(2) Angles of emission of ALB series ringlights. If not indicated, default angle will be /AM. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
Please, consult the code to select a different angle of emission before ordering (additional please, consult product label when purchasing.
annex Z2.1).
(6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
Powered mode [Strobe mode / Continuous mode]
ALB17.01
ALB SERIES
(x4) FILTER 33 33
MOUNT POINTS (x4) FILTER MOUNT
POINTS
60.5 Ø60.5
54 68
54 68
77 Ø77
40 Ø40
(2x) M3x0.5 5
2 x M4x0.7 ` 5
R35 28 (2x) M4x0.7 5 28
R35
POWER
CONNECTOR
60 60
POWER CONNECTOR
630/AN
3cm 80.0 - 100% LUX vs LWD 630/AM
30000
630/AW
25000 W00/AN
60.0 - 80.0% W00/AM
20000 W00/AW
LUX
15000
40.0 - 60.0%
10000
5000
20.0 - 40.0%
0
50 100 150 200 250 300 350 400 450
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of ALB captured image Brightness distribution of ALB0804A-630i/AM@100mm ALB0804A-630i light intensity.
ALD17.01
Connection 2P male chassis 2P male chassis 2P male chassis 2P male chassis 2P male chassis
connector connector connector connector connector
PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V
Power cable (Not-included) VCB Series VCB Series VCB Series VCB Series VCB Series
Modifiers3 N/A N/A
Accessories4
iBlueDrive connection 3P aerial male inline 3P aerial male inline 3P aerial male inline 3P male chassis 3P male chassis
connector. L= 750mm. connector. L= 750mm. connector. L= 750mm. connector connector
PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5
iBlueDrive power cable VCC Series VCC Series VCC Series VCC Series VCC Series
(Not-included)
iBlueDrive accessories4
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) iBlueDrive control input wiring specifications in additional annex Z1.3.
(2) IP43 if the system is positioned so that the light falls vertically. (6) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(3) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (7) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
Powered mode [Strobe mode / Continuous mode]
ALD17.01
ALD SERIES
POWER
POWER CONNECTOR
CONNECTOR
(x3) M5 DIN 913 21.1 Ø 56.5
Ø33.8 Ø 21 Ø36 Ø 58
30°
Ø 40
47.6 Ø 73 120°
30°
120°
Ø 53 60°
(x2) M4 `6
23
Ø 73 120°
(x3)M4 ` 6
(x3) M5 DIN913 27 27 16.5
ALD0303A-E01B ALD0606A-E01B
POWER
CONNECTOR
Ø 71.5 (x3) M5 DIN 913
40.8
(x4)M3 `5
Ø 112
Ø 80
Ø 84 21 Ø 75 Ø 48 R10
60°
120°
Ø 60
44° 60°
120°
(x3)M4`6
15°
(x3) M4` 6
60°
Ø 34 Ø 46
Ø 90 16.5
(x3) DIN913 M5x25
POWER
CONNECTOR
ALD0707A-E01B ALD0907A-E03A
POWER
CONNECTOR
40.8
Ø 131
R10 Ø100
Ø 69
60°
Ø145 Ø 73 60°
12° (x3)M4`6
60°
Ø 49 Ø 61
ALD1108A-E02A
90.0 - 100%
3cm LUX vs LWD
80.0 - 90.0% 4000
Example of ALD captured image Brightness distribution of ALD1108A-630C@165mm ALD1108A-630C light intensity.
ALS17.01
Technical specifications1
Lighting model ALS0402A ALS1105A ALS1307A ALS1612A ALS2315A
O126x41 O145x41
Inner O
Dimensions 48x48x27 176x176x13 245x245x13
21 34 49 120 145
RWD (mm) >40 >50 >80 70< x < 320 80< x <400
Weight 75g 410g 525g 410g 880g
(x7)O4.25`THRU
IP rating IP402 IP30 IP30 IP402 IP402
Mounting holes (x2)M4`6 (x2)M4`6 (x3)M4`6 (x3)M4`6
(x3)DIN913 M5@120º (x3)DIN913 M5@120º (x3)DIN913 M5@120º (x3)DIN913 M5@120º
Connection 2P male chassis 2P male chassis 2P male chassis 2P male chassis 2P male chassis
connector connector connector connector connector
PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V
Power cable (Not-included) VCB Series VCB Series VCB Series VCB Series VCB Series
Modifiers3
Accessories4
iBlueDrive connection 3P aerial male inline 3P male chassis 3P male chassis 3P aerial male inline 3P aerial male inline
connector. L= 750mm. connector connector connector. L= 750mm. connector. L= 750mm.
PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5
iBlueDrive power cable VCC Series VCC Series VCC Series VCC Series VCC Series
(Not-included)
iBlueDrive accessories4
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) iBlueDrive control input wiring specifications in additional annex Z1.3.
(2) IP43 if the system is positioned so that the light falls vertically. (6) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(3) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (7) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
Powered mode [Strobe mode / Continuous mode]
ALS17.01
ALS SERIES
POWER
CONNECTOR
POWER 40.8
CONNECTOR Ø 112 32.8
Ø 80
Ø 21 Ø 36 Ø 48
Ø 33.8 R10 Ø 46
60°
97º
47.6
Ø126 Ø 58 60°
120°
71º
(x3)M4 ` 6
Ø 53 23
(x3)M4 ` 6
27 27 15°
(x3) M5 DIN913 Ø 34
39.8
(x3) DIN913 M5x25
ALS0402A-E00C ALS1105A-E00C
POWER POWER
CONNECTOR CONNECTOR
Ø 131 Ø167
32.8 Ø 100 Ø 181
Ø123
Ø 69 R10 Ø 61
Ø 190
60°
Ø145 Ø 73 60°
Ø120
12° (x3)M4 ` 6
45°
ALS1307A-E00D ALS1612A-E00C
Ø 236.5
Ø 264.5 Ø147 Ø 145
Ø 242
Ø 253
45°
13
245 45°
ALS2315A-E00C
Example of ALS captured image Brightness distribution of ALS1105A-630C@350mm ALS1105A-630C light intensity.
ALU17.01
Inner O
Dimensions 55x55x20 75x75x22 100x100x28
20 37 61
RWD (mm) <115 <120 <190
Weight 85g 130g 260g
IP rating IP402 IP402 IP402
Mounting holes (x3)M4`6 (x4)M4`6 (x4)M4`6
(x3)DIN913 M5@120º
Accessories4
iBlueDrive connection 3P aerial male inline 3P aerial male inline 3P aerial male inline
connector. L= 750mm. connector. L= 750mm. connector. L= 750mm.
PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5
iBlueDrive accessories4
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) iBlueDrive control input wiring specifications in additional annex Z1.3.
(2) IP43 if the system is positioned so that the light falls vertically. (6) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(3) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (7) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
Powered mode [Strobe mode / Continuous mode]
ALU17.01
ALU SERIES
POWER
CONNECTOR
Ø 70 Ø 40
18
R 6.5 Ø 23 Ø 52 (x3)M4 6 R 6.5 39
20 4.5
46
Ø 20
45°
75 67
55 46
84
4
8.5 8 4.5 55 Ø 37
22
(x4)M4 6
POWER
CONNECTOR
ALU0502A-E01B ALU0704A-E01B
120° 120°
100 67
120°
50
4.5 16.5
(x4) M4 6
ALU1006A-E01B
90.0 - 100%
3cm LUX vs LWD
80.0 - 90.0% 2500
70.0 - 80.0%
2000
60.0 - 70.0%
1500
LUX
50.0 - 60.0%
1000
40.0 - 50.0%
30.0 - 40.0% 500
20.0 - 30.0% 0
Example of ALU captured image Brightness distribution of ALU1006A-630C@50mm ALU1006A-630C light intensity.
ALW17.01
Inner O
Dimensions 307x292x15
223
RWD (mm) <350
Weight 550g
IP rating IP40
Mounting holes (x8)M5`6
Connection 2P aerial male connector.
L= 150mm.
PIN 1 = +24V
PIN 2 = 0V
Power cable (Not-included) VCB Series
Modifiers2 N/A
Accessories3
iBlueDrive accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
ALW17.01
ALW SERIES
15 (16 with VRFALW2922A)
Ø 298
15
292 45°
Ø 289.5 Ø 223
45°
Ø240
292
150
R20
(x8)M5`6
Example of ALW captured image Brightness distribution of ALW2922A-630C@50mm ALW2922A-630C light intensity.
AUB17.01
Technical specifications1
Lighting model AUB0402A
Inner O
Dimensions Ø44x45mm
Ø22mm
Accessories3 N/A
iBlueDrive accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
AUB17.01
AUB SERIES
STATUS LED
POWER CONNECTOR
DRIVER
33
Ø44
39 60 33
16.5 30 Ø26
4 16.5 22Ø
3x M4x0.7 x 6
AUB0402A-E01
BKC17.01
u Technical specifications1
Lighting model BKC0806A
O60x100
O60x60
Dimensions
Active surface
Weight 260g
IP rating IP40
Mounting holes (x2)M4`6
Connection 2P male chassis
connector
PIN 1 = +24V
PIN 2 = 0V
Accessories3
iBlueDrive accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
BKC17.01
BKC SERIES
POWER
CONNECTOR
Ø 60 100
Ø 15 THRU
135°
Ø 39
(x2) M4 6
Ø 60
90° 2
80
BKC0806A-E00B
2cm
80.0 - 100%
60.0 - 80.0%
0.0 - 60.0%
BKK17.01
Dimensions 178x188
Active surface 150x140
Weight 260g
IP rating IP69K
Mounting holes (x2)M4`6
Connection Pre-cabled with free
terminals 2X0.5mm²
Length=5m
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
BKK17.01
BKK SERIES
39.6
34
POWER CABLE
46
12
5m
94 R3.5
89 25
5
140 9.6
178 BKK1514A-E01
1cm
80.0 - 100%
60.0 - 80.0%
0.0 - 60.0%
BKL17.01
Power cable (Not-included) VCB Series VCB Series VCB Series VCB Series VCB Series VCB Series
Modifiers2 N/A N/A N/A N/A N/A N/A
Accessories3 X Y XY X Y XY X Y XY X Y XY X Y XY
iBlueDrive connection 3P aerial male inline 3P aerial male inline 3P aerial male inline 3P aerial male inline 3P aerial male inline 3P aerial male inline
connector. L= 750mm. connector. L= 750mm. connector. L= 750mm. connector. L= 750mm. connector. L= 750mm. connector. L= 750mm.
PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control4 PIN 3 = Control4 PIN 3 = Control4 PIN 3 = Control4 PIN 3 = Control4 PIN 3 = Control4
iBlueDrive power cable VCC Series VCC Series VCC Series VCC Series VCC Series VCC Series
(Not-included)
iBlueDrive accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
BKL17.01
BKL SERIES
(x2)M2 5 (x2)M4 6
2.5 8 8.5
POWER 40 52
CONNECTOR
22
4 7 17
12
30
19
50 19 55
30 34 20 8.5
27.5
17 19
8 2 9.5 2.5 8
(x2)M4 6 4.75
40 (x2)M4 6
22
POWER
CONNECTOR
y y
x x
BKL0303A-E00C BKL0504B-E00C
(x2)M4 6
(x4)M4`6
(x2)M4 6
(x2) Filter mount points
8 14.5 10.5 10 22
62 4.75 11.5
2.5 2.5 8.5
25
22.5
13
25 30
19
19 75 70
55 75 30
50
33.5
22.5
R3
50 11.5 8 R7 7
(x2)M4 6 5.5
50 11.5 10
22 (x4)M2 5 75
POWER
CONNECTOR POWER
CONNECTOR
y y
x BKL0505A-E01B x BKL0705B-E00C
(x2)M4 6
(x4)M2 5
(x4)M2 5 (x2)M4 6
3.5 17 22 (x4)M4 6
3.5 17 70
10 4 4
70
26
26
40
25
100 107 55
70 77 25
15.5
15.5
35 50
26
26
8 8 3.5 11 8 89
22 10
(x4)M4 6
3.5 POWER
POWER CONNECTOR
CONNECTOR
y y
x BKL0707B-E00C x BKL1007B-E00C
1cm
80.0 - 100%
60.0 - 80.0%
0.0 - 60.0%
BKL17.01
Power cable (Not-included) VCB Series VCB Series VCB Series VCB Series VCB Series VCB Series
Modifiers2 N/A N/A N/A N/A N/A N/A
Accessories3 X Y XY X Y XY X Y XY X Y XY X Y XY X Y XY
iBlueDrive connection 3P aerial male inline N/A N/A N/A 3P aerial male inline N/A
connector. L= 750mm. connector. L= 750mm.
PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control4 PIN 3 = Control4
iBlueDrive power cable VCC Series N/A N/A N/A VCC Series N/A
(Not-included)
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
BKL17.01
BKL SERIES
(x8)M2 5
(x2)M4 6
(x4)M2 5 R5
(x2)M4 6 100 116
R6 22
22
3 16
4 4
100 39.5
52
25.5
40 150 50 75 154
100 106 55
17
20
50 52
25.5 39.5
8 8 3
10 (x4)M4 6 9.5 6.5 10 3.25 6.25
(x4)M4 6
POWER
CONNECTOR
POWER
CONNECTOR
y y
x x
BKL1010A-E00C BKL1510A-E00C
(x4) FILTER
MOUNT POINTS
(x3)M4 6 R6
R6.5
R 2.5 180 186 5
22 4.75 156.5 7.8 22
150
24 34
3.5 41 54.5
(x3)M4 6
40 50
8 10 (x4)M4 6 R5
11 (x8)M2 5 2 6
10 194
90
POWER 203
CONNECTOR
POWER
CONNECTOR
y y
x BKL1515B-E00C x BKL1818A-E01B
(x3)M4 6 (x4)M4 6
50 22 66 (x4)M2 5
3 22
100
(x3)M4 6
44 52 32
60
50 50
200 100
(x4)M4 6 201 87
50 50
POWER
CONNECTOR
60 75
52 60
3
y y POWER
CONNECTOR
x BKL2005A-E00C x BKL2010A-E00C
1cm
80.0 - 100%
60.0 - 80.0%
0.0 - 60.0%
BKL17.01
Power cable (Nont-included) VCB Series VCB Series VCB Series VCB Series VCB Series
Modifiers2 N/A N/A N/A N/A N/A
Accessories3 X Y XY X Y XY X Y XY Y Y
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
BKL17.01
BKL SERIES
(x4)M4 6
3.5 150 22 169
(x4)M4 6
(x8)M2 5
R5
R 6.5 239 41.5
220 22 17 57
4 7
3.5 27
50 87
50
90
50 250 50
220
50 87 87
50
3.5 50
3.5 50 41.5
11 8 10 33
(x6)M4 6
POWER (x6)M4 6 4
11 8 12 4
CONNECTOR
y y POWER
CONNECTOR
x x
BKL2222A-E00C BKL2515B-E00C
2.5 41 68.5
4
50 87
(x4)M4 6 (x6)M4 6
(x8)M2 5 10
53
250
80.5 50 50 50 73.5 22
47 87
7.5
300
20
2.5 64
47
50
11
10.5 7.5 10 4 7
POWER
CONNECTOR
2 POWER 2
y
x
CONNECTOR
y
x BKL2518A-E00C BKL3005A-E00C
66 60
22
130.5 50 50 50 50 53.5
6.5
400
R5
50
25
2 200 (X8) FILTER MOUNT POINTS
x
y
BKL4005A-E01A
1cm
80.0 - 100%
60.0 - 80.0%
0.0 - 60.0%
BKM17.01
u Technical specifications1
Lighting model BKMaabb*A
Accessories3
iBlueDrive tech. NO
(*) Customizable lighting system composed by increments of 50mm in any of its sides. The required dimension for each application is assembled preserving light homogeneity. The lighting model name will
depend on its length and width as it is shown below:
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
BKM17.01
BKM SERIES
`
` `
BKMaabbA-E01A
4cm
80.0 - 100%
60.0 - 80.0%
0.0 - 60.0%
Example of BKM captured image Brightness distribution of BKM array section at 630C
BKN17.01
u Technical specifications1
Lighting model BKN0nn*0A
(*) Customizable lighting system composed by segments of 200mm of light emission window. The required length for each application is assembled from manufacturation preserving light homogeneity. The
lighting model name will depend on the number of segments and will be composed as it is shown in the table below:
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (3) Accessories are not-included. More information in accessories section.
respectively. (4) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1).
BKN17.01
BKN SERIES
L+30 1
25 0.5 25 0.5
25
12.5 20 0.5
180
29.5 max
2N x (2 x M4x0.7 6) SEGMENT
OF 200mm
20.5
15 10 5
150 L 25
POWER
CONNECTOR
BKN0nn0A-E01C
2cm
80.0 - 100%
60.0 - 80.0%
0.0 - 60.0%
Example of BKN captured image Brightness distribution of BKN array section at 630C
DKL17.01
Inner O
Dimensions 188x188x13 240x240x13 337x337x13 394x394x13
130 180 230 300
RWD (mm) <10 <15 <20 <20
Weight 340g 430g 930g 1180g
IP rating IP40 IP40 IP40 IP40
Mounting holes (x8)O4`THRU (x8)O4`THRU (x8)O4`THRU (x8)O5`THRU
Power cable Pre-cabled with free Pre-cabled with free Pre-cabled with free Pre-cabled with free
terminals 2x0.5mm² terminals 2x0.5mm² terminals 2x0.5mm² terminals 2x0.5mm²
Length=1.8m Length=1.8m Length=1.8m Length=1.8m
Modifiers2 N/A N/A N/A N/A
Accessories3
iBlueDrive connection 3P aerial male inline 3P aerial male inline N/A N/A
connector. L= 750mm. connector. L= 750mm.
PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control4 PIN 3 = Control4
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
DKL17.01
DKL SERIES
(x8)`4 THRU
Ø 180
Ø215.5 Ø 248 (x8) 4 THRU
13 Ø 258.4
13 Ø200 R6
3
R10
3 94.9
30°
POWER POWER
CABLE CABLE
POWER
188
CABLE
240
DKL1813A-E01A DKL2418A-E00B
Ø 230 R 171
16 (x8) 5 THRU
Ø 361.1
16 (x8) 4 THRU Ø 300
R 22 3
3
155.4
130.9
45°
POWER POWER
CABLE CABLE
337 394
DKL3223A-E00B DKL4130A-E00B
DOL17.01
u Technical specifications1
Lighting model DOL0250A*
Dimensions 254x103x38
Active surface (x2) 250x35
RWD (mm) <20
Weight 788g
IP rating IP40
Mounting holes (x4)M4`5
Accessories4 N/A
iBlueDrive tech. N/A
(*) It has a LED indicator that informs you about the device state. This LED is normally OFF. In red, it indicates the overheating of the system. The system will switch off until it is cool again.
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Control input specifications of DOL series in additional annex Z1.4. please, consult product label when purchasing.
(3) Prior to manufacturing optional modifications in standard lighting systems. Please,
consult the code before ordering (additional annex Z2.1).
DOL17.01
DOL SERIES
+0
5 -1.0 A
38
75.9 u 0.5
A 4 x M4x0.7 ` 5
11
Section A-A
5.2
POWER 51.5
CONNECTOR
+0 103
5-1.0 A
125 PIN 1
(24VDC)
250 PIN 2 (0V)
254
PIN 3
(Control)
4 x M4x0.7 ` 5
Detail A
12.5 42 45 80 45
DOL0250A-E01A
3cm
80.0 - 100%
60.0 - 80.0%
40.0 - 60.0%
20.0 - 40.0%
0.0 - 20.0%
DOM17.01
u Technical specifications1 This lighting type is ideal for shinning and curved surfaces.
Bottom O
Dimensions 96x96x50 145x145x72 170x170x86 259x259x100 337x337x116 425x425x181
55 100 125 144 180 265
RWD (mm) <20 <20 <20 <20 <20 <20
Weight 139g 274g 391g 690g 1240g 2180g
IP rating IP00 IP00 IP00 IP00 IP00 IP00
Mounting holes (x8)O3`THRU (x8)O3`THRU (x8)O3`THRU (x8)O4`THRU (x8)O4`THRU (x8)O4`THRU
Power cable Pre-cabled with free Pre-cabled with free Pre-cabled with free Pre-cabled with free Pre-cabled with free Pre-cabled with free
terminals 2x0.5mm² terminals 2x0.5mm² terminals 2x0.5mm² terminals 2x0.5mm² terminals 2x0.5mm² terminals 2x0.5mm²
Length=1.8m Length=1.8m Length=1.8m Length=1.8m Length=1.8m Length=1.8m
Modifiers2 N/A N/A N/A N/A CC1 CC2
Accessories3
iBlueDrive power cable VCC Series VCC Series VCC Series VCC Series N/A N/A
(Not-included)
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
DOM17.01
DOM SERIES
Ø 110 (x8) Ø 3 THRU
(x8) Ø 3 THRU
Ø103 145 72 Ø159
96 50.4 6 6
Ø152 40°
30°
30° 25°
96 145
64.2
Ø55
Ø 25 Ø 48 52
R 45 R69.5
Ø 100
POWER POWER
CABLE CABLE
DOM0906A-E01B DOM1410A-E01B
Ø 279
Ø184
259 100 6.5 Ø 263
Ø177 45°
170 85.6 6
40°
60.5
23°
25°
259
170 96.6
74.8
R 93.5 96.6
Ø125 Ø 144
R 82.1 Ø 40 Ø 47
(x8) Ø3 THRU
POWER
POWER CABLE
CABLE
(x8) Ø4 THRU
DOM1613A-E01B DOM2414A-E01B
22°
23°
337 425
DOM3218A-E01B DOM4127A-E01B
60.0 - 80.0%
40.0 - 60.0%
20.0 - 40.0%
0.0 - 20.0%
DOM17.01
u Technical specifications1 This lighting type is ideal for shinning and curved surfaces.
Bottom O
Dimensions 570x570x264
516
RWD (mm) <50
Weight 2400g
IP rating IP00
Mounting holes (x8)O4.5`THRU
Connection BN = +24V
BU = 0V
Accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
respectively. please, consult product label when purchasing.
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, (5) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
consult the code before ordering (additional annex Z2.1). Powered mode [Strobe mode / Continuous mode]
(3) Accessories are not-included. More information in accessories section.
DOM17.01
DOM SERIES
O 30
6 161 227.7 161
570 263.5
161
227.7
570
161
O 595
O 516
8x O 4.5 ` THRU
45°
22.5°
POWER CABLE 1.8m
45°
DOM5652B-E01B
6cm
80.0 - 100%
60.0 - 80.0%
40.0 - 60.0%
20.0 - 40.0%
0.0 - 20.0%
DTL17.01
O225x85
Bottom O
Dimensions
55
RWD (mm) <50
Weight 1440g
IP rating IP40
Mounting holes (x2)M8`8
(x6)M4`6
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (3) Accessories are not-included. More information in accessories section.
respectively. (4) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1).
DTL17.01
DTL SERIES
DTL3521B-E01A
60.0 - 80.0%
40.0 - 60.0%
20.0 - 40.0%
0.0 - 20.0%
PLA17.01
Accessories3
iBlueDrive accessories3 NO NO
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (3) Accessories are not-included. More information in accessories section.
respectively. (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
(2) Angles of emission of PLA series projectors. If not indicated, default angle will be /AM. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
Please, consult the code to select a different angle of emission before ordering (additional please, consult product label when purchasing.
annex Z2.1).
(6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
Powered mode [Strobe mode / Continuous mode]
PLA17.01
PLA SERIES
7
POWER POWER
CONNECTOR
CONNECTOR
PLA0513A-E01B PLA1013A-E02B
10.9
16
(x2) Ø4 ` THRU
4.5 MOUNT POINTS
4.5 130 25.7 (x2)Ø 4` THRU 4.5 4.5 13 25.7
130
POWER CONNECTOR
POWER
CONNECTOR
PLA1026A-E01B PLA2026A-E01B
630/AO
3cm 80.0 - 100% LUX vs LWD 630/AN
45000 630/AM
40000 630/AW
60.0 - 80.0% 35000
30000
25000
LUX
Example of PLA captured image Brightness distribution of PLA1013A-630i/AN@100mm PLA1013A-630i light intensity.
PLC17.01
iBlueDrive tech. NO NO NO
iBlueDrive connection NO NO NO
iBlueDrive accessories3 NO NO NO
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Control input specifications of PLC series in additional annex Z1.2. please, consult product label when purchasing.
(3) Prior to manufacturing optional modifications in standard lighting systems. Please,
consult the code before ordering (additional annex Z2.1).
PLC17.01
PLC SERIES
(x2)M4 `6
48
48
22
24.5 22
(2x)M4 ` 6
10
76.5 12 10
20
23
(x4)M2 ` 5
72
(x4)M2 `5
150
12
40 8
25 40 8
20
25
87
23.5 165
PLC0307A-E01B PLC0615A-E00C
(4x)M4`6
48
24.5 22
10
88.5 144 12
23
321
306
40 8
25
(x8)M2` 5
PLC1231A-E01B
25000
60.0 - 80.0%
20000
LUX
15000
40.0 - 60.0%
10000
5000
20.0 - 40.0%
0
50 150 250 350
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of PLC captured image Brightness distribution of PLC1231A-630C@350mm PLC1231A-630C light intensity.
PLC17.01
Power cable (Not-included) VCC Series VCC Series VCC Series VCC Series VCC Series
Modifiers3 N/A N/A N/A N/A N/A
Accessories4
iBlueDrive connection 3P aerial male connector. 3P aerial male connector. 3P aerial male connector. 3P aerial male connector. 3P aerial male connector.
L= 150mm L= 150mm L= 150mm L= 150mm L= 150mm
PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control4 PIN 3 = Control4 PIN 3 = Control4 PIN 3 = Control4 PIN 3 = Control4
iBlueDrive power cable VCC Series VCC Series VCC Series VCC Series VCC Series
(Not-included)
iBlueDrive accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Control input specifications of PLC series in additional annex Z1.2. please, consult product label when purchasing.
(3) Prior to manufacturing optional modifications in standard lighting systems. Please,
consult the code before ordering (additional annex Z2.1).
PLC17.01
PLC SERIES
STATUS LED 12 42
12 114 34,5
34,5
2 x M3x0.5 ` 6 2 x M3x0.5 ` 6
STATUS LED
11,5
11,5 150 ±10
120
113 240
233
25 39 39
25
(x4) Filter mount points (x6) Filter mount points
POWER CONNECTOR
POWER CONNECTOR
PLC0412C-E01 PLC0824C-E01
4 x M3x0.5 ` 6
11,5 STATUS LED
150 ±10 11,5
4 x M3x0.5 x 6 150 ±10
39
480
473
25
39 (x6) Filter mount points
25
POWER CONNECTOR
(x10) Filter mount points
POWER CABLE
PLC1648C-E01A PLC1236C-E01
34,5
12 228 12
4 x M3x0.5 ` 6
11,5 150 ±10
STATUS LED
600
593
39
25
(x12) Filter mount points
POWER CABLE
PLC2060C-E01A
3cm
80.0 - 100%
60.0 - 80.0%
40.0 - 60.0%
20.0 - 40.0%
0.0 - 20.0%
PLD17.01
u Technical specifications1
Lighting model PLD0602B PLD1002A PLD1302B PLD1802A PLD2602A
Power cable (Not-included) VCB Series VCB Series VCB Series VCB Series VCB Series
Modifiers3 N/A N/A N/A N/A N/A
Accessories4
iBlueDrive connection 3P aerial male inline 3P aerial male inline 3P aerial male inline 3P aerial male inline 3P aerial male inline
connector. L= 750mm. connector. L= 750mm. connector. L= 750mm. connector. L= 750mm. connector. L= 750mm.
PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5
iBlueDrive power cable VCC Series VCC Series VCC Series VCC Series VCC Series
(Not-included)
iBlueDrive accessories4
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) iBlueDrive control input wiring specifications in additional annex Z1.3.
(2) IP43 if the system is positioned so that the light falls vertically. (6) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(3) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (7) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
Powered mode [Strobe mode / Continuous mode]
PLD17.01
PLD SERIES
(x2)M4 6 7 20 10 (x2)M4 6 8
20
8 8
10 37 12 55 55
(x2)M4 6 (x2)M4 6 12
(x2)M4 6 (x2)M4 6
86
8 122
8 8
4
24 24
33
3 8 (x2) POWER 4 8 4
POWER 3 106
CONNECTOR CONNECTOR 3 3
2 11
64 (x4)M2 5 2
50
16
8 32 R1 16 R1
100
(x4)M2 5
PLD0602B-E01C PLD1002A-E00C
(x2)M4 6 8
20 20 (x2)M4 6 8
8 8
10 69 12 10 94.5 12
(x2)M4 6 (x2)M4 6
(x2)M4 6 (x2)M4 6 8 201
150 8
8 8
24 33
24
33
4 4
4 (x2) POWER 8 185
(x2) POWER 4 3 3
CONNECTOR
CONNECTOR 3 8 134 3
2 (x4)M2 5 8
2 (x4)M2 5 8
16
16
90 R1
64 R1 180
128
PLD1302B-E00C PLD1802A-E00C
(x2)M4 6 8
20
8
10 134 12
(x2)M4 6 (x2)M4 6
8 280 8
24
33
4 4
(x2) POWER 8 264
CONNECTOR 3 3
2 (x4)M2 5 8
16
129.5 R1
259
PLD2602A-E00C
6000
60.0 - 80.0%
5000
4000
LUX
2000
0
50 150 250 350
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of PLD captured image Brightness distribution of PLD2602A-630C@50mm PLD2602A-630C light intensity.
PLU17.01
u Technical specifications1
Lighting model PLU0602B PLU1002A PLU1302B PLU1802A PLU2602A
Power cable (Not-included) VCB Series VCB Series VCB Series VCB Series VCB Series
Modifiers3 N/A N/A N/A N/A N/A
Accessories4
iBlueDrive connection 3P aerial male inline 3P aerial male inline 3P aerial male inline 3P aerial male inline 3P aerial male inline
connector. L= 750mm. connector. L= 750mm. connector. L= 750mm. connector. L= 750mm. connector. L= 750mm.
PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5 PIN 3 = Control5
iBlueDrive power cable VCC Series VCC Series VCC Series VCC Series VCC Series
(Not-included)
iBlueDrive accessories4
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) iBlueDrive control input wiring specifications in additional annex Z1.3.
(2) IP43 if the system is positioned so that the light falls vertically. (6) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(3) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (7) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
Powered mode [Strobe mode / Continuous mode]
PLU17.01
PLU SERIES
(x2)M4 6 7 20 10 (x2)M4 6 8
20
8 8
10 37 12 55 55
(x2)M4 6 (x2)M4 6 12
(x2)M4 6 (x2)M4 6
86
8 122
8 8
4
24 24
33
3 8 (x2) POWER 4 8 4
POWER 3 106
CONNECTOR CONNECTOR 3 3
2 11
64 (x4)M2 5 2
50
16
8 32 R1 16 R1
100
(x4)M2 5
PLU0602B-E01C PLU1002A-E00C
(x2)M4 6 8
20 20 (x2)M4 6 8
8 8
10 69 12 10 94.5 12
(x2)M4 6 (x2)M4 6
(x2)M4 6 (x2)M4 6 8 201
150 8
8 8
24 33
24
33
4 4
4 (x2) POWER 8 185
(x2) POWER 4 3 3
CONNECTOR
CONNECTOR 3 8 134 3
2 (x4)M2 5 8
2 (x4)M2 5 8
16
16
90 R1
64 R1 180
128
PLU1302B-E00C PLU1802A-E00C
(x2)M4 6 8
20
8
10 134 12
(x2)M4 6 (x2)M4 6
8 280 8
24
33
4 4
(x2) POWER 8 264
CONNECTOR 3 3
2 (x4)M2 5 8
16
129.5 R1
259
PLU2602A-E00C
1500
LUX
500
20.0 - 40.0%
0
50 100 150 200 250
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of PLU captured image Brightness distribution of PLU1302B-630C@50mm PLU2602A-630C light intensity.
PRA17.01
u Technical specifications1
Lighting model PRA0818A
Dimensions O8x12
LEDs number 1
RWD (mm) <50mm
Weight 20g
IP rating IP40
Mounting holes BODY Ø8 x 12mm
Connection 2P male chassis
connector
PIN 1 = +24V
PIN 2 = 0V
PNP
Accessories5
iBlueDrive Accessories5
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Control input specifications of PRA series in additional annex Z1.2. please, consult product label when purchasing.
(3) Prior to manufacturing optional modifications in standard lighting systems. Please,
consult the code before ordering (additional annex Z2.1).
PRA17.01
PRA SERIES
150 ± 5
12
18
POWER
CONNECTOR
Ø 18
Ø8
PRA0818A-E01
PRC17.01
u Technical specifications1
Lighting model PRC0604C PRC0606B PRC0608C
Accessories5
PRC17.01
PRC SERIES
3 x M4x0.7 ` 6
66
STATUS FILTER
LED 55 FIXING POINTS
54.7 54.7
45 (x4) M2 4
8
12 12
7
49 45
75
8 11
43.5
29 29
60 24 24.5 11
32
19.5 19.5
12.5 33
(x2) M4x0.7 6 (x2) M4x0.7 6
50 32 25
FLEXIBLE 35.5 40
CABLE
4 x M4x0.7 ` 6
R8
150
4 X FILTER
MOUNT 150
POINTS
POWER
CONNECTOR
PRC0604C-E01A PRC0606B-E01C
3 x M4x0.7 ` 6
STATUS
LED
8 11
60 24 24.5 11
32
12.5
50 32 25
4 x M4x0.7 ` 6
R8
150
4 X FILTER
MOUNT
POINTS
POWER
CONNECTOR
PRC0608C-E01A
630i/AN
3cm 80.0 - 100% LUX vs LWD 630i/AM
35000
630i/AW
30000
60.0 - 80.0% 25000
20000
LUX
10000
0
100 150 200 250 300 350 400 450 500
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of PRC captured image Brightness distribution of PRC0608C-630i/AW@350mm PRC0608C-630i light intensity.
PRD17.01
u Technical specifications1
Lighting model PRD0200A PRD0500B
Accessories4 IP67
iBlueDrive accessories4
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) iBlueDrive control input wiring specifications in additional annex Z1.3.
(2) IP43 if the system is positioned so that the light falls vertically. (6) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(3) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (7) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
Powered mode [Strobe mode / Continuous mode]
PRD17.01
PRD SERIES
Ø
Ø
57.5
55
39 Ø
Ø
Ø 20
Ø 12
POWER CABLE
± ±
PRD0200A-E01B PRD0500B-E01B
8000
40.0 - 60.0%
6000
4000
20.0 - 40.0% 2000
0
50 150 250 350
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of PRD captured image Brightness distribution of PRD0500B-630C@350mm PRD0500B-630C light intensity.
PRH17.01
O40x80
O22
Dimensions 125x125x34.5
Active surface 115x115
RWD (mm) >40 >100
Weight 150g 794g
IP rating IP65 IP65
Mounting holes (x2)M4`5 (x10)M4`6
Connection 3P aerial male connector. 3P aerial male connector.
L= 150mm. L= 150mm.
PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control2 PIN 3 = Control2
Accessories4
iBlueDrive accessories4
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 modification before ordering (additional annex Z2.1).
respectively. (4) Accessories are not-included. More information in accessories section.
(2) Control input specifications of PRH series in additional annex Z1.2. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(3) Prior to manufacturing optional modifications in standard lighting systems including please, consult product label when purchasing.
angles of emission of PRH series projectors. If not indicated, default angle will be /AM. (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
Please, consult the code to select a different angle of emission or another optional Powered mode [Strobe mode / Continuous mode]
PRH17.01
PRH SERIES
(x2) FILTER
10
O 40
MOUNT POINTS 8
150 80
O 22
61
28
0
49
25
37
11 26.5 STATUS
LED
A 125 34.5
115 22 81
12 30
2 x M4x0.7 ` 5
9
OVERHEAT
33 INDICATOR 76
125 115
POWER
CONNECTOR DETAIL A
PIN 1: PIN 2: 0V
12
24VDC
R12
R12
20 150 ±10
4 x FILTER MOUNT
PIN 3: POINTES
CONTROL
PRH0104A-E01A PRH1612A-E01A
630/AN
3cm LUX vs LWD
80.0 - 100% 630/AM
1000000 630/AW
630/AD
60.0 - 80.0% 100000
10000
LUX
100
20.0 - 40.0%
10
50 100 150 200 250 300 350 400
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of PRH captured image Brightness distribution of PRH0104A-630C/AW@200mm PRH0104A-630C light intensity.
PRK17.01
Dimensions 73x73x24.8
Active surface 32x32
RWD (mm) >50
Weight 673g
IP rating IP69K
Mounting holes (x2)M4`6
Modifiers3 D
Accessories4 NO
iBlueDrive accessories4
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Accessories are not-included. More information in accessories section.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Control input specifications of PRK series in additional annex Z1.2. please, consult product label when purchasing.
(3) Prior to manufacturing optional modifications in standard lighting systems. Please,
consult the code before ordering (additional annex Z2.1).
PRK17.01
PRK SERIES
42
24.8 ± 0.2
73 22 31
11 32
32 49
73
DCM Sistemes
PRK0608A
21.5
2 x M4x0.7 ` 6
STATUS LED
5m
POWER CABLE
PRK0608A-E01A
630i/AN
3cm 80.0 - 100% LUX vs LWD 630i/AM
35000
630i/AW
30000
60.0 - 80.0% 25000
20000
LUX
10000
0
100 150 200 250 300 350 400 450 500
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of PRK captured image Brightness distribution of PRK0608A-630i/AW@350mm PRK0608A-630i light intensity.
PRL17.01
u Technical specifications1
Lighting model PRLnn00B*
Connection BN = +24V
BU = 0V
Accessories3
(*) Customizable lighting system composed by segments of 201mm of light emission window. The required length for each application is assembled from manufacturation preserving light homogeneity. The
lighting model name will depend on the number of segments and will be composed as it is shown in the table below:
Lighting model N = No. of segments *nn = N x 2 Length = Nx201mm
PRL0200B 1 02 201
PRL0400B 2 04 402
PRLnn00B N nn (Nx201)
PRL3000B 15 30 3015
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (3) Accessories are not-included. More information in accessories section.
respectively. (4) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Focal Lengths or diffuse emission of PRL series projectors, identified as modifiers. If not please, consult product label when purchasing.
indicated, default modifier will be /F1. Please, consult the code to select a different one
before ordering (additional annex Z2.1).
PRL17.01
PRL SERIES
(nn x 201) + 6
35
(nn x 201)
1.8m
12
151
53.8
21.7
INPUT POWER REQUIRED
EACH 5 SEGMENTS
PRLnn00B-E01A
W00/F1
2cm LUX vs LWD
80.0 - 100% W00/F2
800000 W00/F3
700000
60.0 - 80.0% 600000
500000
LUX
400000
40.0 - 60.0%
300000
200000
20.0 - 40.0% 100000
0
0 50 100 150 200 250 300 350 400
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of PRL captured image Brightness distribution of PRL0200B-W00C/F1@50mm PRL0200B-W00C light intensity.
PRY17.01
u Technical specifications1
Lighting model PRY0504A PRY0906A PRY1609A
Accessories3
iBlueDrive accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
PRY17.01
PRY SERIES
(x4)M4 6 POWER
CONNECTOR
11 10.4
POWER
CONNECTOR
8 18 10
42.5 35 25 25
5.5 (x4)M3 5 3.5
21.25 101 4
16.6
68.1
22.5
65
45 56 49 86.1
114
66.9 M4 6
2
7
46.5 32.5 11
25.3 13 22
PRY0504A-E01B PRY0906A-E01B
22 11 (x4)M4 6 11
POWER
CONNECTOR
128 5
19.25 21 7.5
86 113
197.5
158
192.5
99.25
(x4)M4 6
12.5
13 11 M4 6 48.9 45 5
64
118.9
PRY1609A-E01B
Example of PRY captured image Brightness distribution of PRY1609A-630C@350mm PRY1609A-630C light intensity.
SAC17.01
u Technical specifications1
Lighting model SAC0505A SAC0808A SAC1010A SAC3010A
Power cable (Not-included) VCB Series VCB Series VCB Series VCB Series
Modifiers2
Accessories3
iBlueDrive connection 3P aerial male inline 3P male chassis 3P male chassis 3P male chassis
connector. L= 750mm. connector connector connector
PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V PIN 1 = +24V
PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V PIN 2 = 0V
PIN 3 = Control4 PIN 3 = Control4 PIN 3 = Control4 PIN 3 = Control4
iBlueDrive power cable VCC Series VCC Series VCC Series VCC Series
(Not-included)
iBlueDrive accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
SAC17.01
SAC SERIES
51.9 61 53.9
75 82 77
25.9 14 11 6 25.9 37.5 2 17 20 22 37.5
20 20
25
50 50 62 75 75 87
25 31 37.5 37.5 43.5
6 21 6
20 48
(x4)M4 ` 6
6 48
46 46 125 33.5
(x4)M4 6
100
SAC0505A-E01B SAC0808A-E02B
100
100
52
56
100 300
112 23 312 23
31 50 20
56 50 100 50 24
24
24 150 150
24
100 300
52
100 100
56
SAC1010A-E01A SAC0310A-E01A
Example of SAC captured image Brightness distribution of SAC0505A-630C@5mm SAC0505A-630C light intensity.
SAL17.01
u Technical specifications1
Lighting model SAL0202A SAL0504A
Accessories3
iBlueDrive accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
SAL17.01
SAL SERIES
15
2m 16.5 40
17 29.5 49
15.6
38.5
12.25
14
35
24.5 18.5
40
POWER 12.25 30 9
16.5 7.4 7.8
CABLE (2x) M4 6
21
(x2)Ø3 5 (2x) Ø3H8 6
30
(x2)M3 5
37.5
9.25 82.5 81 21
17 47
12.25 8.5 4
29.5 7 61 33.5
62.5 5
67
SAL0202A-E01C SAL0504A-E01C
1000
40.0 - 60.0% 800
600
400
20.0 - 40.0% 200
0
5 10 15 20 25 30 35 40 45 50
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of SAL captured image Brightness distribution of SAL0504A-630C@50mm SAL0504A-630C light intensity.
SAR17.01
Dimensions 80x70x96
Active surface 74x62
RWD (mm) <100
Weight 356g
IP rating IP40
Mounting holes (x2)M4`6
Connection 3P male chassis
connector
PIN 1 = +24V
PIN 2 = 0V RING
PIN 3 = 0V AXIAL
Accessories3
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
respectively. please, consult product label when purchasing.
(2) Prior to manufacturing optional modifications in standard lighting systems. Please,
consult the code before ordering (additional annex Z2.1).
(3) Accessories are not-included. More information in accessories section.
SAR17.01
SAR SERIES
70 RING LIGHT
AXIAL LIGHT
EMISSION 40 EMISSION
4
15
49 80
40
77
15.5 1.5
35 18.5
40
9 (2x)M4 6
30
21
(2x)Ø3H8 6
9
87 96
7 47
33.5 7
60
5 67 23.5
SAR0504A-E01C
2500
40.0 - 60.0%
2000
1500
1000
20.0 - 40.0% 500
0
0 10 20 30 40 50 60 70 80 90 100
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of SAR captured image Brightness distribution of SAR0504A-630C@15mm SAR0504A-630C light intensity.
SAX17.01
u Technical specifications1
Lighting model SAX0505A SAX1010B SAX1515A SAX2020A SAX2515A
Power cable (Not-included) VCB Series VCB Series VCB Series VCB Series VCB Series
Modifiers2
Accessories3
iBlueDrive power cable VCC Series VCC Series N/A N/A N/A
(Not-included)
(1) Environmental specifications and iconography legend in additional annex Z1.1 and Z2 (4) iBlueDrive control input wiring specifications in additional annex Z1.3.
respectively. (5) Bear in mind that consumption table is only to be used as a guide. To refer to real values,
(2) Prior to manufacturing optional modifications in standard lighting systems. Please, please, consult product label when purchasing.
consult the code before ordering (additional annex Z2.1). (6) Values of maximum instantaneous consumption of ’Type i’ lighting systems in
(3) Accessories are not-included. More information in accessories section. Powered mode [Strobe mode / Continuous mode]
SAX17.01
SAX SERIES
POWER
POWER CONNECTOR
CONNECTOR (x4) M4 6 (x4) M4 6
150
51 51 6 50.5 6 2
14 20 17 65 50 50.5
25.5 25 25.5
20
50 50
25
62 100 50 100 112
50 50
21 24 6
46 6 75 46 31 24 31
2
100 47 101 140 101 47
SAX0505A-E01B SAX1010B-E01B
200 200 47
152 46 201 270 201
152 2 50 50 2 100.5 50 50 6 100.5
80 76 2
76 120
75 100 100
50
50
150 150 162 200 200 212
24 50 50
24
75
56
46 6
6 24 6 2 47
31 22
209 (x9) M4 6
(x9) M4 6 POWER
CONNECTOR POWER
CONNECTOR
SAX1515A-E01B SAX2020A-E01B
200 200
152 152
46 2 50 50 6
76 80 76
125 125
50
250 250 262
50
24
81
6 24 46
2
(x9) M4 6 207
POWER
CONNECTOR
SAX2515A-E01B
2500
40.0 - 60.0%
2000
1500
1000
20.0 - 40.0% 500
0
5 15 25 35 45
0.0 - 20.0% LWD (Light Working Distance in mm)
Example of SAX captured image Brightness distribution of SAX1010B-630C@5mm SAX1010B-630C light intensity.
u LIGHTING FILTERS
u DARKFIELD CONVERTER
u HEAT DISSIPATOR
u CABLES
u FIXING BRACKETS
u LENS AND ACCESORIES FOR THE FILTERS
u STROBE AND RGB CONTROLLERS
u COLOR TEST LAMP
u IBLUEDRIVE TECHNOLOGY
87
ACCESSORIES & LIGHTING FILTERS aA
ACCESSORIES
VF017.01
In a vision application, there will often be times when using standard illumi- Color test lamp Multispectral laboratory device that allows you to check which
wavelength is the most suitable one for your vision application.
nation products cannot quite achieve the desired results. In these situations,
there are a number of filters and other accessories that allow the user to Strobe and RGB Essential lighting driver for working with lights that not work in
controllers continuous mode.
meet certain requirements.
iBlueDrive Special accessories for iBlueDrive technology devices.
Collimater Obtain a parallel shaft that forces the matching up of the len optical axis VCFx
with the central beam of the system. Available on X, Y and XY axis. VCFy
Collimater filters on X axis (horizontal axis) make the light parallel on x axis, VCFxy
which improves the inspection of vertical edges. Instead, collimater filters on
Y axis (vertical axis) make the light parallel on y axis, which improves the Y
inspection of horizontal edges.
X
X and Y axis are identify on backlight diagrams with the symbol:
Diffuser Convert the emitted light from direct to diffuse light, increasing by means VDF
of this filter the aperture angle and softening the light.
Polarizer Facilite the light polarization, through which undesirable brightness are VPF
avoided by only making way for those vibrations that occur in a determinate
plane.
Protector Preserve from dust and external conditions those lighting systems that VPT
have some fragile components.
Antiglare filter This filter is specially designed for the ALB0804A. It allows the system to VPC
eliminate specular surfaces and obtain very good quality images.
Darkfield Mechanic systems that allow us to turn ringlights into darkfields through VRF
converter reflection. They are fitted together in the lower part of the ringlight, making
the light coming into contact directly with the reflector and bouncing with a
little angle. VRF reflectors permit us the creation of smaller darkfields with
a big inspection area in relation with its size.
Filter, darkfield
converter or heat
u Order reference: dissipator series Lighting model Composed by two parts. The first one is the filter, darkfield converter
(example) or heat dissipator series (previous tables) and the second is the ligh-
ting model.
VPF ALD0707A Consult which lighting models can add supplementary filters, darkfield
converter or heat dissipator at additional annex, Z4.1. or in each pro-
duct datasheet.
88
CABLES aA
ACCESSORIES
VC017.01
Power cables
DCM Sistemes provides supplementary cables for guaranteeing the correct
supply of its led lighting systems. These cables are necessary for connecting
DCM Sistemes lamps, so we strongly recommend you to assure you have the
specific cable required for each lighting product’ connection.
u VC Series
Cable series Series Poles Description Ø section Length Connector type PIN colour Connection specs.
VCB 2 Monochromatic lighting 0.5mm² Various Lengths Normal PIN 1 BN/RD According to the
systems without control available Right angle PIN 2 BU/BK operating mode
signal.
(A1.1) (A1.2) (Consult on each product
datasheet or A1.3)
VCC 3 Monochromatic lamps 0.25mm² Various Lengths Normal PIN 1 RD According to the
with control signal or available Right angle PIN 2 BU operating mode
bichromatic systems. PIN 3 GN
(A1.1) (A1.2) (Consult on each product
datasheet or A1.3)
VCD 4 Trichromatic lighting 0.22mm² Various Lengths Normal PIN 1 YE According to the
systems (RGB). available PIN 2 RD operating mode
PIN 3 GN
(A1.1) (A1.2) (Consult on each product
PIN 4 BU datasheet or A1.3)
Composed by two or three parts according to connector type. Only add the
third when ordering a right angle connector. Normal connector no needs the VCx nnn -ACy
additional part.
(A1.1) (A1.2)
28.6u1
Ø 11.5 Ø 11
VC017.01
Other cables
Apart from power cables for guaranteeing the correct supply of our lamps,
DCM Sistemes provides other cables for programming or interconnecting
DCM Sistemes lighting systems.
VCL10n* Interconnection of VSC series strobe controllers, thus According to the number
allowing control of several lighting systems simulta- of strobe controllers to
(*n = Number of strobe neously. interconnect.
controllers you want to
interconnect)
90
CABLES aA
ACCESSORIES
VC017.01
Power cables
VCU series are thought to facilitate the connexions between applications by directly
connecting between DCM Sistemes products and connecting with other brands. These
cables simplify connection schemes and avoid the excess of cables in the applications.
VCU01A Interconnection between PLD or PLU series, in case we need more than Various Lengths
one PLD or PLU lighting system for an application, avoiding this way uncon- available
fortable wiring from them to the power supply
source. (A1.4)
VCU02A It is a special cable that allows us to connect systems with 3 pin connector Various Lengths
to 2 pin connector. This connection allows forcing the continuous mode for available
iBluedrive systems or for systems with
control terminal without the need of an extra wiring. (A1.4)
VCU03A It is a converter cable from VCC 3 pin to VCB 2 pin connector. It is designed Various Lengths
for linking led lighting systems with 2 pins in applications with DCM sys- available
tems with 3 pin connector. Thus, in case you need to change the lighting
system in an application, it is not (A1.4)
necessary to change all the wiring.
VCU04A Cable M12 male to VCB 2 pin connector. With this cable we can connect Various Lengths
DCM systems with 2 pins in applications where M12 connections are used. available
For example, we can connect DCM systems directly to COGNEX cameras
that have external light control connection, such as the In-Sight 7000 and (A1.4)
the DataMan 300 allowing us to power the light in continuous mode directly
from the camera.
VCU05A Cable M12 male to VCC 3 pin connector. With this cable we can directly con- Various Lengths
nect 3 pin DCM lighting systems in applications where M12 connection is available
used. For example, we can link DCM systems directly to COGNEX cameras
with external light control connection, such as the In-Sight 7000 and the (A1.4)
DataMan 300 allowing us to power the light and control it directly from the
camera software.
VCU06A Y Splitter cordset that allows to power two lights from just one cable. On Various Lengths
VCB connector one side it has an aerial male connector and on the other side two aerial available
female connectors connected in parallel. This is very useful in installations
VCU07A where there is only one cable installed and we have two DCM Sistemes (A1.4)
systems.
VCC connector
VCU08A Y Splitter cordset that allows to power three lights from just one cable. On Various Lengths
VCB connector one side it has an aerial male connector and on the other side three aerial available
female connectors connected in parallel. This is very useful in installations
VCU09A where there is only one cable installed and we have three DCM Sistemes (A1.4)
systems.
VCC connector
Composed by two parts according to connector type. First one is the cable
and the second one is for the length. VCUxxx nnn
(A1.4)
VB017.01
Fixing brackets
Brackets that maintain fixed the lighting system to specific surface.
VBA Series: Lighting systems brackets
VBB Series: Multifunctional brackets
VBC Series: Camera brackets
VBD Series: Lens Filter Holder for cameras.
u VBA Series
Description Order ref. 3D Fixing diagram Diagram
O 4 ` THRU
70
R12
Fixing bracket for VBA000A
O 4.25
PRC0606B
54.6 90º
(2x) O 4 `THRU
R15 54
20 15
14
28 70º
69
73
Bracket for fixing VBA015A 167.6
SAC0808A to
DTL3521B.
(order separately)
5 20
8
36
10.5
Ø 4.2
15
R7
7
22
120
50 4.1
Fixing bracket for VBA030A
PLD/PLU to PLD/PLU 50 6
Series at 90º 85
2
35 50
R4
R10
116
35
143.5
O 4.25 8.5 8
4.25
Fixing bracket for VBA045A
PLD/PLU to PLD/PLU 4.25
Series at 90º
30.5
25.5
16 90º
10.5
30.5
23
21
92
FIXING BRACKETS aA
ACCESSORIES
VB017.01
u VBA Series
26
8
20 16
R2.1
5
R2.1 13
50 20
16
7 8
25
32
29.5 29.5
10
4.2 1.5
7.5
Fixing bracket for VBA060A
ALB, ALD, ALS 22.5 37.5
and ALU. 7.5
12.5
79
32.3
4.2
7.5
Fixing bracket for VBA062A
ALU0704A.
16 28
15
10
8.5 9 R2.1
5 5
34.5 9
62
7
16
4
6 19 R2.1
25 5
40 10
VB017.01
u VBA Series
9.5
2.75
6
8
26.5
17.5
20 5
13
12
20
48.2
u VBB Series
R6
O4
O4
10
R6
7.5
22 37
20
22 R5 R5
135º
Multifunctional VBB015A 20
bracket 10
(2x) O4 ` THRU
R4 7
R10
22
(2x) O 5 ` THRU
50
22
10
R10 12
u VBC Series
40 20
7 14
5.5 4
19
94
LENS FILTER HOLDERS AND COLOR TEST LAMP aA
ACCESSORIES
VB017.01
VK017.01
VS017.01
Triggers per second Up to 2500 Current 6A per channel. Maximum current 18A joining all
outputs into one channel
Input impedance 60k?
Power adjust 255 levels of control at each independent exit from
Pulse width Configurable between 0µS...10mS in steps of 4µS 0mA to the maximum level set.
Pulse delay Adjustment of initial delay Pulse width Configurable between 24µS...2mS in steps of 1µS
Dissipation Low Pulse delay Between 30µS and 13.1mS in steps of 1µS
Serial communication PC / PLC connection Port control USB programming cable VCP100 (non-
Programming via RS-232 stored in non-volatile memory included) indispensable for setting up the
strobe controller.
Anchorage 35mm DIN type rail mount regulator
RS232, RS485 or Ethernet adapter (Consult).
96
iBLUEDRIVE aA
ACCESSORIES
VT017.01
iBlueDrive accessories
TECHNOLOGY
Accessories for iBlueDrive technology products
u VTA Series
Description Order ref. Simplified circuit
POWER +
POWER -
Adjusts and controls through the USB cable all VTA0005A
operating parameters of iBlueDrive lighting PC
systems, when a major control of light previous USB 1 2
setup is needed.
OPTOISOLATED
Parameters adjustment can be done 'online' or 2K4
7A Fuse
'offline', through our free software iBlueDrive IN + 6 resettable
}
TRIGGER PC DATA
Control Manager. IN LINK 24V 3 24VDC (RD)
IN - 7
CONTROL 0V 4 0V (BU)
iBlueDrive LIGHTS
OUT + 8 TRIGGER DATA& 5 CONTROL
OUT
BOX OUT - 9
TRIGGER (GN)
POWER +
POWER -
Adjusts and controls through the RS232 cable all VTA0006A
operating parameters of iBlueDrive lighting PC
systems, when a major control of light previous RS232 1 2
setup is needed.
OPTOISOLATED
Parameters adjustment can be done 'online' or 2K4
7A Fuse
'offline', through our free software iBlueDrive IN + 6 resettable
}
TRIGGER PC DATA
Control Manager. IN LINK 24V 3 24VDC (RD)
IN - 7
CONTROL 0V 4 0V (BU)
iBlueDrive LIGHTS
OUT + 8 TRIGGER DATA& 5 CONTROL
OUT
BOX OUT - 9
TRIGGER (GN)
USB
}
reliably in industrial environments. 7 POWER
4K7
OPTO POWER -
0V 42
10K 24V
0V
CONTROL 3
POTENTIOMETER
B
A
ADDITIONALANNEX
99
ADDITIONAL INFORMATION
ANNEX
ZXA17.01
u Z1.1 - Environmental Specifications PNP model (lighting systems with PNP modifier =/P)
Icontrol (mA)
Standards
5
4
3
2
1
u Z1.2 - Control input NPN/PNP for ’Type C’ lighting systems of DOL, 0
PLC, PLX, PRH series, PRC0604C and PRC0606B. 0 5 10 15 20 25 30
Vcontrol (Volts)
NPN model (by default)
NPN chart of Vcontrol (Volts) vs Icontrol (mA) PNP wiring for ON/OFF mode
Input NPN
OUT Device
4 1 = ON PNP OUTPUT
CONTROL (GN) COM 0 = OFF (sourcing)
3.5 ON OFF
LED
3 BU
LIGHTING
Icontrol (mA)
0V
2.5 SYSTEM RD
24VDC
2
1.5
1
0.5
Electrical specifications
0
0 5 10 15 20 25 30 0V to +6.8V Light OFF
Electrical specifications
0V to +6.8V Light ON
+7.2V to +24V Light OFF
Working conditions 25ºC, VIN = 24V
Connection Direct to a NPN output
Delay from OFF to ON state <5 µs
Delay from ON to OFF state <5 µs
Bias voltage in control input 7.9V
Input impedance 7K9 ?
100
ADDITIONAL INFORMATION
ANNEX
ZXA17.01
BU
0V
RD
LIGHT 24VDC
A 11.5
PNP wiring for strobe or ON/OFF mode
4
OUT Device
PNP OUTPUT 16.5 LED STATUS INDICATOR
1 = ON PIN 3
(sourcing)
x2 O4
CONTROL (GN) COM 0 = OFF (CONTROL) 33 60
Detail A TO THE
BU LIGHTING
0V
RD © DCM Sistemes
OUT Device
0 = ON TPL OUTPUT WARNING!: In continuous and powered mode, clamp driver to a metal surface
CONTROL (GN) 1 = OFF for heat dissipation. In Strobe mode is not required, but recommended.
BU
0V
RD
LIGHT 24VDC
CONTROL (GN)
BU
0V
RD
LIGHT 24VDC
10 Kohms
CONTROL (GN)
BU
0V
RD
LIGHT 24VDC
ZXA17.01
ƒ3 Infinite focal Length /F3 365 400 470 525 630 850/880
X
Collimater filter on x axis VCFx
’Cloudy day’ lighting effect
Y Collimater filter on y axis VCFy
Ultra-diffuse light
102
ADDITIONAL INFORMATION
ANNEX
ZXB17.01
u Z3.1 - Choosing the correct illumination for your application Summarizing, the key to perfect inspection:
Purpose of illumination
Image processing applications can be for visual inspection, character recognition, measuring dimensions and/or positioning. We
1 must decide between homogenous illumination of the entire (interesting) field of view, generation of high contrast between object
features and surroundings or an individual intensive light source that provides independence from disruptive ambient light, among
other specific characteristics.
PURPOSE &
APPLICATION Defect characteristics
For example, we will generally use:
n Avoid reflections with shiny à Homogeneous illumination
These defects will influence on illumination objects. technology (dome, axial, etc.)
techniques and working distances. n Emphasize structures and à Side illumination
embossings.
2 Coloured objects
n Detection of scratches, angular
phases, impressions or outer
contours.
à Dark-field effect
WORKPIECE Coloured object features appear brighter if the n Measurement applications or à Backlight illumination
UNDER light is the same colour and object appears error detection with slides,
INSPECTION darker if the light colour is complementary.
glass, etc.
the less diffuse the light is because n Colour temperature (”white” light)
illumination is getting more and n Special waveLengths (IR/UV)
more a point light source. Light Collimater filter y axis added
n Beam angle of the illumination (direct/diffuse)
NT017.01
104
ADDITIONAL INFORMATION
ANNEX
ZXC17.01
x y /C IPXX PNP D ƒ1 ƒ2 ƒ3
VPF
ALB0804A Built in VCC - - VPC - - VDF - - VBA060A - - - - - - /AN /AM /AW - /AD - - -
VPF
ALB0810A Built in VCC - - VPC - - VDF - - VBA060A - - - - - - /AN /AM /AW - /AD - - -
ALD0303A inline VCB - VST - - - - - - VBA060A - /FPL - - - - - - - - - - - -
ALD0606A inline VCB - VST - - - - - - VBA060A - - - - - - - - - - - - - -
ALD0707A inline VCB - VST VPF - - VDF - VRF VBA060A - - - - - - - - - - - - - -
ALD0907A Built in VCB - VST - - - - - - VBA060A - /FPL - - - - - - - - - - - -
ALD1108A Built in VCB - VST - - - - - - VBA060A - /FPL - - - - - - - - - - - -
ALS0402A inline VCB - VST - - - - - - VBA060A - /FPL - - - - - - - - - - - -
ALS1105A Built in VCB - VST - - - - - - VBA060A - /FPL - - - - - - - - - - - -
ALS1307A Built in VCB - VST - - - - - - VBA060A - /FPL - - - - - - - - - - - -
ALS1612A inline VCB - VST - - - - - - - - /FPL - - - - - - - - - - - -
ALS2315A inline VCB - VST - - - - - - - - /FPL - - - - - - - - - - - -
ALU0502A inline VCB - VST - - - - - - VBA060A - - - - - - - - - - - - - -
ALU0704A inline VCB - VST - - - - - - VBA060A - - - - - - - - - - - - - -
ALU1006A inline VCB - VST - - - - - - VBA060A - - - - - - - - - - - - - -
ALW2922A inline VCB - VST - - - - - VRF - - - - - - - - - - - - - - -
AUB0402A inline VCC - - - - - - - - - - - - - - - - - - - - - - -
BKC0806A inline VCB - VST - - - - - - - - - - - - - - - - - - - - -
BKK1514A - VCB - VST - - - - - - - - - - - - - - - - - - - - -
BKL0303A inline VCB - VST - - - - - - - - - - - - - - - - - - - - -
BKL0504B inline VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL0505A inline VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL0705B inline VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL0707B inline VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL1007B inline VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL1010A inline VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL1510A - VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL1515B - VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL1818A - VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL2005A inline VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL2010A - VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL2222A - VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL2515B - VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL2518A - VCB - VST VPF VCF- VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL3005A - VCB - VST VPF - VCFy - - - VBA075A - - - - - - - - - - - - - -
BKL4005A - VCB - VST VPF - VCFy - - - VBA075A - - - - - - - - - - - - - -
BKMaabbA - VCB - - - - - - - - VBA075A - - - - - - - - - - - - - -
BKN0nn0A - VCB - - - - - - - - - - - - - - - - - - - - - - -
DKL1813A inline - - VST - - - - - - - - - - - - - - - - - - - - -
DKL2414A inline - - VST - - - - - - - - - - - - - - - - - - - - -
DKL3223A - - - VST - - - - - - - - - - - - - - - - - - - - -
DKL4130A - - - VST - - - - - - - - - - - - - - - - - - - - -
DOL0250A Built in VCC - - - - - - - - - - - - - - /P - - - - - - - -
DOM0906A inline - - VST - - - - - - - - - - - - - - - - - - - - -
DOM1410A inline - - VST - - - - - - - - - - - - - - - - - - - - -
DOM1613A inline - - VST - - - - - - - - - - - - - - - - - - - - -
DOM2414A inline - - VST - - - - - - - - - - - - - - - - - - - - -
DOM3218A - - - VST - - - - - - - - - - CC1 - - - - - - - - - -
DOM4127A - - - VST - - - - - - - - - - CC2 - - - - - - - - - -
DOM5652B - - - VST - - - - - - - - - - - - - - - - - - - - -
DTL3521B - VCD - VST - - - - - - - - - - - - - - - - - - - - -
PLA0513A - VCC - - VPF - - VDF - - VBA090A VHD - - - - - /AN /AM /AW /AO /AD - - -
PLA1013A Built in VCC - - VPF - - VDF - - VBA090A VHD - - - - - /AN /AM /AW /AO /AD - - -
PLA1026A - VCC - - VPF - - VDF - - VBA090A 2-VHD - - - - - /AN /AM /AW /AO /AD - - -
PLA2026A Built in VCC - - VPF - - VDF - - VBA090A 2-VHD - - - - - /AN /AM /AW /AO /AD - - -
ZXC17.01
x y /C IPXX PNP D ƒ1 ƒ2 ƒ3
VBA050A
PLC1648C Built in VCC - - VPF - - VDF - - VBA055A - - - - - - - - - - - - - -
VBA050A
PLC2060C Built in VCC - - VPF - - VDF - - VBA055A - - - - - - - - - - - - - -
VBA045A
PLD0602B inline VCB - VST VPF - - VDF - - VBA050A - - - - - - - - - - - - - -
VBA055A
VBA045A
PLD1002A inline VCB VCU VST VPF - - VDF - - VBA050A - - - - - - - - - - - - - -
VBA055A
VBA045A
PLD1302B inline VCB VCU VST VPF - - VDF - - VBA050A - - - - - - - - - - - - - -
VBA055A
VBA045A
PLD1802A inline VCB VCU VST VPF - - VDF - - VBA050A - - - - - - - - - - - - - -
VBA055A
VBA045A
PLD2602A inline VCB VCU VST VPF - - VDF - - VBA050A - - - - - - - - - - - - - -
VBA055A
VBA045A
PLU0602B inline VCB - VST VPF - - - - - VBA050A - - - - - - - - - - - - - -
VBA055A
VBA045A
PLU1002A inline VCB VCU VST VPF - - - - - VBA050A - - - - - - - - - - - - - -
VBA055A
VBA045A
PLU1302B inline VCB VCU VST VPF - - - - - VBA050A - - - - - - - - - - - - - -
VBA055A
VBA045A
PLU1802A inline VCB VCU VST VPF - - - - - VBA050A - - - - - - - - - - - - - -
VBA055A
VBA045A
PLU2602A inline VCB VCU VST VPF - - - - - VBA050A - - - - - - - - - - - - - -
VBA055A
PRC0604C Built in VCC - - VPF - - - - - VBA050A - - - - /67 /P /AN /AM /AW - /AD - - -
VBA055A
PRC0606B - VCC - - VPF - - VDF - - VBA000A - - - - - - /AN /AM AW - /AD - - -
PRH0104A Built in VCC - - VPF - - - - - VBA050A - - - - /67 /P /AN /AM /AW - /AD - - -
VBA055A
PRH1612A Built in VCC - - VPF - - - - - VBA050A - - - - /67 /P /AN /AM /AW - /AD - - -
VBA055A
106
ADDITIONAL INFORMATION
ANNEX
ZXC17.01
x y /C IPXX PNP D ƒ1 ƒ2 ƒ3
iBLUEDRIVE TECHNOLOGY COLLIMATER FILTER /C MECHANICAL NARROW ANGLE ƒ1 FOCAL Length = 50mm
MODIFICATIONS
POWER CABLE/S POLARIZER FILTER PROTECTOR FILTER MEDIUM ANGLE ƒ2 FOCAL Length = 150mm
OTHER CABLE/S DIFFUSER FILTER FIXING BRACKET WIDE ANGLE ƒ3 FOCAL Length = ∞
STROBE AND RGB DARKFIELD CONVERTER DISSIPATOR OVAL ANGLE = 23-24º on X axis
CONTROLLERS 17-18º on Y axis
PNP PNP INPUT MODEL IP67 IP RATING = IP67 D DIFFUSE EMISSION
(1) iBlueDrive availability and modality. According to technical specifications, iBlueDrive can be integrated on chassis (Built in) or added through iBlueDrive inline.(Additional annex Z1.4)
(2) Power supply cable needed for the standard version. iBlueDrive technology always requires VCC Series cable for supplying.
(3) Angles of emission and focal Lengths are considered as modifiers because they are mechanical requirements from manufacturation. Various options. If not chosen, default angle will be /AM and default
focal Length will be /F1.
Consult extended icons’ legend and the difference between accessories and modifiers in ’How to use this catalog’ section (page 14) or in additional annex Z2. Specific characteristics of each product in its
series’ datasheet.