Escolar Documentos
Profissional Documentos
Cultura Documentos
for Windows
The ZakosUKC has been designed and is ideally suited to assist ship’s officers for calculating
Squat and U.C.K.. onboard Tanker and Cargo Ship.
Using various Inputs from the user calculates Squat and UCK
The package is a menu driven and does not require any previous experience on the use of
computers.
Note :
Set the PC’s Regional Settings the Short Date Format as shown bellow.
Otherwise an error message will be displayed when you type a date.
b: if the regional settings are set to English type the date : dd/mm/yyyy e.g. 29/Oct/2013
type 29112013 (8) eight numbers
Zoom View
Use Up/Down button to increase / decrease form view scale
Drag Left/Right / Up/Down the Form in order to increase / decrease Form
2
Page
Ta b l e of C o n t e n t s
1 STARTING UKC Tide Prediction Program 3
2 GENERAL RULES AND INSTRUCTIONS 4
The Cursor key movements and Function keys 4
Entries 4
Screens 4
MAIN MENU Screen 5
Window Menu Selection 6
Screen Message Window 6
Warning Messages 6
Warning Message with Selection 6
Exit from the Program 7
12 EXPORT FILE 23
13 DELETE FILE 24
14 SAVE CALCULATE FILE 25
15 LOAD A STORED CALCULATE FILE 26
16 CALCULATOR 27
17 ABOUT 28
in the case NO icon displayed then follow the procedure described below
2.
Click at the Start button where the Start Window Menu will be displayed.
3.
Click the Programs where the following Window will appear
4.
At the title Zakos UKC Calc move the mouse pointer until you see the title ( Zacos UKC Calc )
then press the ENTER key or click with mouse in order to start the program.
4
GENERAL RULES AND INSTRUCTIONS:
Before proceeding to the instructions necessary to each screen the following basic functions are considered important
and should be memorised. The Cursor key movements and Function keys:
Key Result
Up Arrow Moves One Line Up
Dn Arrow Moves One Line Down
Right Arrow Moves cursor to Right
Left Arrow Moves cursor to Left
PgUp Moves Screen Up
PgDn Moves Screen Down
Home Moves cursor to the Beginning of Line
End Moves cursor to the End of Line
Backspace Errases a character to the left of the cursor
CLICK :
Press and release the left mouse button. A click is used to select an item on the screen.
ENTRIES:
Input screens are designed so that the user is free to move the cursor to any position using the arrows and make an
entry.
Mistakes: Illegal entries are not accepted by your system rejection is followed by a characteristic beeper alarm.
SCREENS:
The user communicates with the system through a number of screens. According to the functions they perform screen
are divided in the following 3 categories:
Using the mouse the user may select the desired system function. Click the mouse to execute the selected function.
To select a calculation move the mouse so the tip of the mouse pointer usually an arrow is on the name of a
Menu Calculation Button icon you want to select. Quickly press and release the left mouse button.
6
WINDOW MENU SELECTION:
A Window Menu will display a list of selections as shown in the following illustration:
To select a menu title move the mouse so the tip of the mouse pointer usually an arrow is on the name of a Menu title you
want to select. Quickly press and release the left mouse button.
WARNING MESSAGES:
Those messages will appear in a window form displaying the message and will cover part of the screen and will be removed
by clicking the OK button. A such message is shown in the following illustration:
Click OK to continue
On the top of the screen appears the ( Main Menu ) with the five (3) horizontal selections and 10 icons as shown in the
following illustration:
Toolbar :
1 2
Remarks : You must type all the informations required ( for the UKC calculation )
UKC REPORT :
View UKC Calculation Report :
Click this icon with the mouse and the following Window will appear.
The above Table will contains all the Informations required for the SQUAT & UKC Calculation.
For the first time the table will be empty.
When the above Table displayed follow the below program execution.
10
TABLES INFO TO BE FILLED :
Type the required information in the columns ONLY with Very Light Yellow color
DATE / TIME : Will be automatically inserted as soon Date has been typed
TYPE TIDE HEIGHT and CURRENT per Hour as shown above
Note : ( for CURRENT AGAINST SHIP use negative sign e.g. -0.5 )
With the cursor click one of the two selections ( 1.0 knots OR 0.5 knots )
13
SELECT UNITS MODE :
With the cursor click one of the two selections ( Meters OR Feet )
Using Metric Units all UKC Report / Open Squat / Confined Squat / Heel will be shown in Meters
Using Feet Units all UKC Report / Open Squat / Confined Squat / Heel will be shown in Feet
Note :
Once all info has been completed all program forms calculation are automatically completed
You may return anytime to this UKCInfo form and change any info value and the program
automatically recalculate all program forms calculations.
When all above Info has been completed the UKC Calculation File will be saved
e.g. UKC Voyage- ( Voyage No. ) . Ship’s ID No. as shown above
Remarks :
Pay attention that the program assigns automatically the Extension of the File ( .u09 ) u09 is Ship’s ID No.
Therefore DO NOT try to change this File Extension otherwise you will NOT be able to Load this File.
Click this icon with the mouse and the following Window will appear.
Click to Print Report Click to Save Current UKC Report Click to Return to UKC Main Menu
Note : if you wish to view or print calc values in Feet then SELECT UNITS MODE as shown in page 13
Same apply to all UKC reports
In the above Table uses a Range of Speed and Chart Depth to calculate the Ship’s Squat and UKC.
15
DISPLAY DETAILED UKC CALCULATION
In order to display a window for ( Detailed UKC Calculation ) for a particular cell do as follows :
e.g. for Ship’s Speed = 12.0 and for a Tide Height = 3.20m and a Current = -0.5 knots.
Select that cell in our example = 3.16 then right click and the following Window will be displayed.
Where a full detailed calculation is displayed as you may see the above table.
16
OVERHEAD CLEARANCE REPORT TABLE :
From the ( Main Menu ) point the mouse on the icon bellow
Click this icon with the mouse and the following Window will appear.
In the above Table uses only Speed and Chart Depth to calculate the Ship’s Squat and UKC and
Clearance Height of passing a Bridge or an Obstruction.
17
SPEED / UKC CALC CURVE REPORT TABLE :
From the ( Main Menu ) point the mouse on the icon bellow
Click this icon with the mouse and the following Window will appear.
Max. Speed
Obtained for
the Req. UKC
Click to Print Report Click to Calc Max. UKC Table Click to Calc Max. Speed for UKC Table
In the above Table uses only Speed and Chart Depth to calculate the Ship’s Squat and UKC
18
AIR DRAFT CALC REPORT :
From the ( Main Menu ) point the mouse on the icon bellow
Click this icon with the mouse and the following Window will appear.
Type Drafts FWD & AFT and Height of Obstruction from Water Line
e.g. 15.00 / 16.25 / 55.00 and the results are shown at above Table
19
CONFINED SQUAT CALC REPORT :
From the ( Main Menu ) point the mouse on the icon bellow
Click this icon with the mouse and the following Window will appear.
20
OPEN SQUAT CALC REPORT :
From the ( Main Menu ) point the mouse on the icon bellow
Click this icon with the mouse and the following Window will appear.
21
HEEL CALC REPORT :
From the ( Main Menu ) point the mouse on the icon bellow
Click this icon with the mouse and the following Window will appear.
22
ALL UKC CALCULATION AS EXCEL REPORTS :
From the ( Main Menu ) point the mouse on the icon bellow
Click this icon with the mouse and the following Window will appear.
Click to Calc all UKC Reports then click the Save button
Note : First click the Calc button then the Save button otherwise the Save button will be locked
23
EXPORT CALC FILE :
From the ( Main Menu ) point the mouse and click [ File ] and the following Window will appear
Click the Export Calc File and the following Window will appear :
Select Export File ( Calc File ) or ( Excel File ) clicking appropriate icon then
Select file by hit ( ENTER ) or ( Double click with the mouse where the following Window will appear :
From the ( Main Menu ) point the mouse and click [ File ] and the following Window will appear
Select Delete File ( Calc File ) or ( Excel File ) clicking appropriate icon then
Select file :
type the file name you wish to save then ( Click the button Save )
Remarks :
DO NOT Type the following characters when typying the File Name ( . / \ ) or space
If for any reason a File with the same name exists e.g. ( 63L ) type ( 63L-1A )
The best is to use Tide Port Name e.g. UKC Voyage-63L-1.
Pay attention that the program assigns automatically the Extension of the File ( .u09 ). U09 is the Ship’s ID No.
Therefore DO NOT Change this File Extension otherwise you will NOT be able to Load this File.
If for any reason you wish to abort the operation then, just click the Cancel button.
26
SAVING A FILE WITH DIFFERENT NAME :
Click at the File then when the icon shown below appears.
Move the mouse pointer at File Name row you wish to Load the stored file then click the Open button.
If for any reason you wish to abort the operation then, just click the Cancel button.
27
CALCULATOR :
From the ( Tool Bar ) point the mouse on the icon bellow
Click this icon with the mouse and the following Window Screen will appear:
Calculator Procedure :
Click each button number you wish e.g. 12029.182 m3
Click button numbers 1, 2, 0, 2, 9, ., 1, 8, 2 then click the button m3/Bbls and
the result will be displayed.
The procedure described above will be carried out so many times as you wish.
28
ABOUT :
From the ( Tool Bar ) point the mouse on the icon bellow
Click this icon ( About ) with the mouse the following Window Screen will appear:
29
SELECT YOUR SHIP from the COMPANY’S FLEET LIST :
When you start the program for the first time you will observe on the ( Toolbar ) a different ship name
than your ship name. Therefore in order to select the correct ship name from the Company’s Fleet List.
Do the following :
From the ( File Menu ) see the ( Ship Files ) selection then point the mouse on the icon bellow
Click this icon with the mouse and the following Window will appear.
The above Table will contains all the Fleet Vessel’s. For the first time the table will display the
first vessel on the list. e.g. the M/T OLYMPIC LOYALTY II.
To select your vessel Double click or [ Hit ENTER Key ] Ship Name from the list then,
click at the ( Close ) button to return to UKC MAIN MENU