Escolar Documentos
Profissional Documentos
Cultura Documentos
Oils having water, dissolved gases, in addition to the other solid contaminants, are very
dangerous combination, which cause very adverse effects on the equipment performance
through component corrosion, pitting, wear, sluggish movements etc. thus impairing the reliability
of the equipment.
Proper Hydraulic and Lube Oil cleanliness level discipline therefore needs ample stress. In
operating conditions, it is essential to maintain cleanliness level standard of such Aviation oils
conforming to National Aerospace Standard 1638 to NAS class 3-5 condition.
1
effects on the equipment performance through component corrosion, pitting, wear, sluggish
movements etc. thus impairing the reliability of the equipment.
Inside the Centrifuge, a twin jet rotor, powered only by oil pressure of the purifier module, rotates
at high speeds. Forces 2000 times greater than gravity are created to literally force dirt and con-
taminants out of hydraulic, lube or gear oils.
Hard and sharp abrasive metallic particles are removed down to a half micron size. Plus the rest
of the dirt, which causes parts to wear and oil to deteriorate are also removed.
Thus the moving and rotating components and bearings last longer. This also result in far fewer
lube oils drains and extension in life of full-flow filter, reducing the cost of filter element changes
and maintenance costs go down.
Thus the finest oil cleaning system in the world; with a centrifuge, super fine filters helps to keep
the oil clean.
The Purifier module also incorporates two stages of high capacity Micron Plus filters
for long element life and better system protection. The first stage filter captures
larger particles, while the second stage (outlet) filter controls finer particles or
removes water.
SALIENT FEATURES
The experience of over three decades, interacting with designers and users of hydraulic and lube
oils has helped to evolve this cost effective purifier consistent with economy and technology,
which will help the user to reduce following:
• Two stage polish filtration with super fine filters offer ultra pure oil
• Pump protection with relief valve for high pressure
• Savings in Replacement Element cost due to increased life of line elements
• Wide variety of particulate removal
• Extends fluid life and system offers a desired cleanliness level of oil.
• The centrifuge removes Hard and sharp abrasive metallic particles are removed down to
A size of Half micron along with the rest of the dirt, that causes parts to wear and
Oil to deteriorate.
• Heavy duty rugged tubular frame
• Rugged and durable unit.
• Built to last for many hours of use
• Lightweight mobile and portable
• Easy to move from place to place with lockable castor wheels.
• Single person, simple operation with minimum need for supervision.
• Ready to use as received
2
SYSTEM CONTROLS
The purifier is incorporated with a built in automatic cum manual electrical control system for
controlling of oil temperature, starting/stopping of oil pumps, visual indications and audio alarm
for system malfunction, filter element choke up etc.
“OLEUM TEK” Purifier is a compact factory tested unit. It has a minimum number of moving parts
i.e. two oil pumps and a twin jet type centrifuge. The purifier can be easily hooked on the
equipment where oil is to be cleaned by just coupling the inlet/outlet hoses of it to main oil tank of
the equipment without need for any major piping or any modifications. The system due its built in
controls and design needs minimum supervision once it is started. The open frame design
permits easy monitoring and maintenance of the purifier.
All the critical component elements of the “OLEUM TEK” Purifier are of international repute make
thus enabling it easy to avail of global service parts/service centers of the component
manufacturers available worldwide. In addition qualified distributors/representatives and the main
factory offers further support direct from the purifier's manufacturing facility.
3
Making Facilities, Service Stations of Machine Tools, Hydraulic
components Test Rigs etc.
*****