Escolar Documentos
Profissional Documentos
Cultura Documentos
□ Tentative Specification
□ Preliminary Specification
■ Approval Specification
Customer:
APPROVED BY SIGNATURE
Name / Title
Note
Version 3. 0 1 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
CONTENTS
6. INTERFACE TIMING.............................................................................................................................................19
6.1 INPUT SIGNAL TIMING SPECIFICATIONS..................................................................................................19
6.2 POWER ON/OFF SEQUENCE.....................................................................................................................22
7. OPTICAL CHARACTERISTICS.............................................................................................................................23
7.1 TEST CONDITIONS .....................................................................................................................................23
7.2 OPTICAL SPECIFICATIONS ........................................................................................................................24
Version 3. 0 2 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
8. PRECAUTIONS ....................................................................................................................................................28
8.1 ASSEMBLY AND HANDLING PRECAUTIONS .............................................................................................28
8.2 SAFETY PRECAUTIONS .............................................................................................................................28
9. DEFINITION OF LABELS......................................................................................................................................29
9.1 CMI MODULE LABEL...................................................................................................................................29
Version 3. 0 3 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
REVISION HISTORY
Version Date Page(New) Section Description
Ver. 3.0 Nov.16, 2012 All All The Approval Specification for Ver.C3 was first issued.
Version 3. 0 4 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
1. GENERAL DESCRIPTION
1.1 OVERVIEW
V236BJ1-LE1 is a 23.6” TFT Liquid Crystal Display module with WLED Backlight unit and 30 pins 1ch-LVDS
interface. This module supports 1366 x 768 HDTV format and can display up to 16.7M (8 bit) colors. The
converter module for Backlight is not built in.
1.2 FEATURES
High brightness (250 nits)
High contrast ratio (3000:1)
Fast response time (Gray to gray average (8.5) ms)
High color saturation (NTSC 72%)
HDTV (1366 x 768 pixels) resolution, true HDTV format
DE (Data Enable) only mode
LVDS (Low Voltage Differential Signaling) interface
Optimized response time for 60 Hz frame rate
Viewing Angle: 176(H)/176(V) (CR>20) MVA Technology
RoHS compliance.
1.3 APPLICATION
Personal TV /Public Display Application
Home Theater Application
MFM Application
1.4 GENERAL SPECIFICATIONS
Power consumption 22.679W (Max.) [Cell PW 6.349W (Max.) + BLU PW 16.33W (Max.)] Watt (2)
Display Colors 16.7M color -
Display Operation Mode Transmissive Mode / Normally Black - -
Version 3. 0 5 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Weight - 2270 - g -
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Version 3. 0 6 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of
display area is less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature
of display area from being over 65 ºC. The range of operating temperature may degrade in case of
improper thermal management in final product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
Version 3. 0 7 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Value
Item Symbol Unit Note
Min. Max.
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for input pin of LED light bar at Ta=25±2 (Refer to 3.2 for further
information).
Version 3. 0 8 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
(Ta = 25 ± 2 ºC)
Value
Parameter Symbol Unit Note
Min. Typ. Max.
Note (1) The module should be always operated within the above ranges.
Note (2) Measurement condition:
Version 3. 0 9 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
c. Horizontal Pattern
Version 3. 0 10 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
VPIN(8) , IPIN(8)
Function
generator
Version 3. 0 11 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Version 3. 0 12 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
SCAN DRIVER IC
RX0(+/-)
TFT LCD PANEL
(1366x3x768)
Foxconn GS23301-0321R-7H
RX1(+/-)
P-TWO=187098-30091
RX2(+/-)
INPUT CONNECTOR
TIMING
RX3(+/-)
RXCLK(+/-)
CONTROLLER
DATA DRIVER IC
SELLVDS
DC/DC CONVERTER &
REFERENCE VOLTAGE
Vcc
GND
Version 3. 0 13 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Version 3. 0 14 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Note (5) Suggested connector connected in seriesJAE FI-X30HL (Japan Aviation Electronics Ind., LTD.)
Version 3. 0 15 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
TxIN RxOUT
Rx0+ 51
100pF
Rx0- R0-R7
R0-R7 51
Rx1+ 51 G0-G7
G0-G7 100pF
Rx1-
51 B0-B7
B0-B7
Rx2+ 51
DE Rx2-
100pF
DE
51
Rx3+ 51
100pF
Rx3-
51
Host
CLK+ 51
Graphics PLL 100pF DCLK
CLK- PLL
Controller 51 Timing
Controller
LVDS Transmitter LVDS Receiver
THC63LVDM83A THC63LVDF84A
(LVDF83A)
Note (1) The system must have the transmitter to drive the module.
Note (2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line when it is
used differentially.
Version 3. 0 16 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Version 3. 0 17 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Version 3. 0 18 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram. (Ta = 25 ± 2 ºC)
Fr5 47 50 53 Hz
Frame Rate
Fr6 57 60 63 Hz
Vertical
Active Total Tv 700 806 1050 Th Tv=Tvd+Tvb
Display
Term Display Tvd 768 768 768 Th
Note (1) Please make sure the range of frame rate has follow the below equation
Fclkin(max) Fr6 Tv Th
Fr5 Tv Th Fclkin(min)
Version 3. 0 19 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Note (2) This module is operated in DE only mode and please follow the input signal timing diagram below
Tv
Tvd
Tvb
DE
Th
DCLK
Tc
Thd
Thb
DE
Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI
Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.
Version 3. 0 20 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Note (5) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.
LVDS RECEIVER INTERFACE TIMING DIAGRAM
Tc
RXCLK+/-
RXn+/-
Tlvsu
Tlvhd
1T 5T 7T 9T 11T 13T
14 14 14 14 14 14
Version 3. 0 21 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
0.1VCC 0.1Vcc
0V
0.5T1 10ms T1 T3
0T250ms
0T350ms
500ms T4 T2
T4
VALID
LVDS Signals
0V
Power On P
0T7T2
0T8T3
T7 T8
Option Signals
(SELLVDS)
T5 T6
Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.
Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD
operation or the LCD turns off before the backlight turns off, the display may momentarily become
abnormal screen.
Note (3) In case of VCC is in off level, please keep the level of input signals on the low or high impedance.
Note (4) T4 should be measured after the module has been fully discharged between power off and on period.
Note (5) Interface signal shall not be kept at high impedance when the power is on.
Version 3. 0 22 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change during
measuring. In order to stabilize the luminance, the measurement should be executed after lighting backlight for 1
hour in a windless room.
Version 3. 0 23 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Rx 0.638 -
Red
Ry θx=0°, θy =0° 0.337 -
Viewing angle
Gx at normal direction 0.309 -
Green
Gy 0.620 -
Typ. Typ.
(1)(4)
Color -0.03 +0.03
Bx 0.149 -
Chromaticity
Blue
By 0.059 -
Wx 0.280 -
White
Wy 0.290 -
θx+ 80 88 -
Horizontal
θx- 80 88 -
Viewing Angle CR≥20 Deg. (1)(4)
θY+ 80 88 -
Vertical
θY- 80 88 -
Version 3. 0 24 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Normal
θx = θy = 0
θy- θy+
6 o’clock
y- x+ θX+ = 90
θy- = 90
CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note(7).
100%
90%
Optical
Response
10%
0%
Time
Gray to gray Gray to gray
switching time switching time
The driving signal means the signal of gray level 0, 31, 63, 95, 127, 159, 191, 223 and 255..
Gray to gray average time means the average switching time of gray level 0, 31, 63, 95, 127, 159, 191,
223 and 255 to each other.
Version 3. 0 25 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
LCD M odule
LCD P anel
CS-2000T
- or equivalent
(D, W) (D, W)
YA, D (D/2,7W/8) YB, D (D/2,7W/8)
Version 3. 0 26 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
W/4 1 2
Vertical Line
3 4
Active Area
Version 3. 0 27 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
8. PRECAUTIONS
8.1 ASSEMBLY AND HANDLING PRECAUTIONS
[1] Do not apply rough force such as bending or twisting to the module during assembly.
[2] It is recommended to assemble or to install a module into the user’s system in clean working areas. The
dust and oil may cause electrical short or worsen the polarizer.
[3] Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.
[4] Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the
damage and latch-up of the CMIS LSI chips.
[5] Bezel of Set can not press or touch the panel surface. It will make light leakage or scrape.
[6] Do not plug in or pull out the I/F connector while the module is in operation.
[7] Do not disassemble the module.
[8] Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily
scratched.
[9] Moisture can easily penetrate into LCD module and may cause the damage during operation.
[ 10 ] When storing modules as spares for a long time, the following precaution is necessary.
[ 10.1 ] Do not leave the module in high temperature, and high humidity for a long time. It is highly
recommended to store the module with temperature from 0 to 35at normal humidity without
condensation.
[ 10.2 ] The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or
fluorescent light.
Version 3. 0 28 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
9. DEFINITION OF LABELS
9.1 CMI MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
E 2 0 79 4 3
M A D E IN T A IW A N
V236BJ1-LE1 Rev. XX
GEMN
RoHS
XXXXXXXYMDLNNNN
Serial No.
Product Line
Revision
Version 3. 0 29 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
10. PACKAGING
10.1 PACKING SPECIFICATIONS
(1) 11 LCD modules / 1 Box
(2) Box dimensions: 620(L) X 348(W) X 430(H) mm
(3) Weight: approximately: 29.1kg (11 modules per box)
Version 3. 0 30 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Corner Protector
(50*50*1000mm)
PP Belt
Corner Protector
Film
(50*50*800mm)
PE Sheet
Pallet
Pallet (1250*1050*143mm)
(1250*1050*143mm)
Carton label
Carton label
PP Belt
Corner Protector
(50*50*1000mm)
PE Sheet
Corner Protector
(50*50*1250mm)
Film
Pallet
(1250*1050*143mm)
Carton label
Version 3. 0 31 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Version 3. 0 32 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited
PRODUCT SPECIFICATION
Version 3. 0 33 D a t e16 N ov 20 12
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited