Escolar Documentos
Profissional Documentos
Cultura Documentos
Module Assessment
Reg.No. Name of the Student
Component - 1: (Assignment and Laboratory Test) (1.A+1.B)
1. A Assignment (100 Marks)
Marks
Sections
Max Marks
Examiner
Marking Scheme
Marks
Visit of station room of A:
What types of the telephone on the table of Station controller is
available. Show a sketch showing its connectivity up to CER along with the
type of transmission media, intermediate termination along with
1. protective devices. 20
Name Wireless equipment’s and its path for DMO and TMO, its wattage
antenna, power supply. Show its rough sketch.
What are different type of computer terminal at station and its function,
its connectivity to CER or other places, interfaces used?
PF visit:-
PART A
How does Passenger emergency phone connected and what is end to end
2. path 20
Show different interface on the way along with transmission media.
How can a passenger at PF stops the train draw a sketch.
Explain types of speaker along with its wattage found at PF
3. How the noise is picked up .Role of antenna on a metro train along with a 20
sketch of the antenna
Visit of OCC:-
4. Write a detail report along with many sketches about CER of OCC 20
showing equipment’s, Rack, Transmission media and inter connectivity
Visit of the Lab:-
5. 20
Along with sketches write a detailed report of the lab visit
Note:
1. Assignment Report shall have, mainly, the above headings. The contents shall be informative
with supporting technical data.
2. Other than the above, information which are found more appropriate shall also be captured in
the Assignment Report.
3. The Assignment Report document shall be neatly presented with supporting sketches
wherever necessary.
Total Assignment Marks 100
If the module has Laboratory element, 40% weight of Total Assignment Marks
(i.e. 1.A Marks = Total Assignment Marks × 0.4)
If the module does not have Laboratory element, 50% weight of Total Assignment Marks
(i.e. 1.A Marks = Total Assignment Marks × 0.5)
1
RUAS RST03/ January 2019
Component - 2: Examination
Examination Max Marks Examiner Marks
Written examination 100
Signature of Examiner:
Please note:
1. Documental evidence for all the components/parts of the assessment such as the reports, presentation slides, posters, laboratory
exam / tool tests are required to be attached to the assignment report in a proper order.
2. The marks for all the questions of the assignment have to be written only in the Component -1: Assignment table.
3. The individual question marks have to be entered on the table of the Answer book for written exam and only the total marks are
entered in Component-2: Examination table.
Instructions to students:
1. The assignment has to be neatly word processed as per the prescribed format.
2. The maximum number of pages should be restricted to 35.
3. Use only SI units.
4. Submission after the due date is not permitted.
5. Method of evaluation as per the submission and marking scheme
6. At the end, you are required to comment on -
a. Benefits you have derived by solving this assignment
b. Whether assignment was able to assess module learning outcomes or not?
7. IMPORTANT: It is essential that all the sources used in preparation of the assignment must be suitably referenced in
the text.