1. The document provides instructions for installing a Wi-Fi light switch, including connecting the live wire to the "L" terminal, connecting lamp wires to terminals "L1, L2, L3" depending on the number of lights, and mounting the switch and cover plate in the wall box.
2. It notes the switch must be connected to the null line and live wire of the controlled lights. A test pen can identify wire types by whether the light turns on.
3. Safety tips are given such as turning off power before installing and handling the glass cover with care.
1. The document provides instructions for installing a Wi-Fi light switch, including connecting the live wire to the "L" terminal, connecting lamp wires to terminals "L1, L2, L3" depending on the number of lights, and mounting the switch and cover plate in the wall box.
2. It notes the switch must be connected to the null line and live wire of the controlled lights. A test pen can identify wire types by whether the light turns on.
3. Safety tips are given such as turning off power before installing and handling the glass cover with care.
1. The document provides instructions for installing a Wi-Fi light switch, including connecting the live wire to the "L" terminal, connecting lamp wires to terminals "L1, L2, L3" depending on the number of lights, and mounting the switch and cover plate in the wall box.
2. It notes the switch must be connected to the null line and live wire of the controlled lights. A test pen can identify wire types by whether the light turns on.
3. Safety tips are given such as turning off power before installing and handling the glass cover with care.
Installation Wiring Diagram 2. Prepare to install wiring 3.
Fix the switch into the wall Installation Notes
A: Live wire connects " L" terminal 1.Remove the panel with screwdriver B: Lamp wire connects “L1,L2,L3" terminal A: Put the switch into the switch box from the wall B: Mount the two screws C: Install the glass panel (install from top to bottom) 1 gang connects “L1" terminal D: Turn on electricity. LED light will flash quickly and 1. It will be best if the installation would be EU 2 gang connects “L1,L2" terminal switch will enter standby mode performed by a professional electrician. Before installation, turn off the electricity! 3 gang connects “L1,L2,L3 terminal 2. The switch must be connected with null line, and Wi Fi Switch live wire of controlles light. (Ground line is optional, L ( L i v e W i re ) if without, do not need it.) N ( N u ll L i n e ) 3. How to distinguish between null line, live wire of Instalation Guide controlled light and ground line (Note: If there is no null line in your house, you should add a null line. Use the test pen to identify the type of wire: if the light of the test pen lights up, it is a live wire. Otherwise, it is See the a null line.) Picture below In your original wall switch, use the test pen to Cover identify the type of wire: if the light is off, it is a live glass panel wire of controlled light (L1,L2,L3). Otherwise, it is a EU Live wire (L GND line is double coloured: yellow and green). 4. The panel is glass. Please operate with caution.
(Noted: Installation without electricity p ower on)