Você está na página 1de 63

Smart DCR User Manual

For

Online Building Plan Scrutiny System (OBMAPS)

For

Greater Noida Industrial Development Authority

Version 4.3
GNIDA Smart DCR - User Manual - Version 4.3

TABLE OF CONTENTS

Page
S. No. Description
No
1.0 INTRODUCTION 2

2.0 PROMINENT PROCESS OF THE SOFTWARE 2

2.1 ONLINE BUILDING PLAN APPROVAL SYSTEM PROCESS 2

2.2 SMART DCR SCRUTINY PROCESS 3

3.0 OBJECTIVES 3

4.0 SCOPE OF THE SYSTEM 3

5.0 DO’S AND DONT’S 4

5.1 DO’S 4

5.2 DONT’S 4

6.0 DRAWING FILE SPECIFICATION 5

6.1 LAYERING SYSTEM TO BE FOLLOWED 5

6.2 THE DRAWING FILE SHOULD HAVE THE FOLLOWING SPECIFICATIONS 5

7.0 PRECHECK SOFTWARE 6

8.0 PROCEDURE TO CREATE A DRAWING 7

8.1 PARAMETERS TO BE DRAWN USING LINE OBJECTS 7

8.2 PARAMETERS TO BE DRAWN USING POLYLINE OBJECTS 7

8.3 PARAMETERS TO BE DRAWN USING TEXT OBJECTS 9

9.0 DETAILS OF COLOR CODE FORMAT 10

10.0 LIST OF TEXT PERMITTED INSIDE RESIDENTIAL UNITS 16

11.0 LIST OF TEXT NOT PERMITTED INSIDE RESIDENTIAL UNITS 16

12.0 LIST OF NON FAR TEXT PERMITTED 16

13.0 LIST OF COMMERCIAL TEXT PERMITTED 17

14.0 LIST OF INSTITUTIONAL TEXT PERMITTED 17

15.0 ANNEXURE - PARAMETERS SNAPSHOTS 18

16.0 PRECHECK ERRORS AND CORRECTION PROCEDURE 57


GNIDA Smart DCR - User Manual - Version 4.3

1.0 INTRODUCTION

Every city in the world is continually evolving and developing to meet its citizen’s needs.
An authority powered by government will be controlling the development of cities to have
a harmonious as well as infrastructural and technologically superior living for all.

The authority will lay out a set of rules to be followed for every new development as well
as regulating existing development. The method is to receive set of engineering plans
related to each proposal, study them in detail and extract the basic information required
like built up area, spacing between adjacent building, height etc. after matching them
with the rules laid out, the authority can either approve the proposal or ask for certain
modifications to be done in the plan.

For larger cities this becomes a cumbersome process owing to the large amount of
applications received and manually calculating various areas, totaling and then coming
to a conclusion

So software has been developed by us, which will study the engineering plans provide in
the CAD format, Process the plans and generate complete and detailed set of report for
further decisions by the approval authorities.

A large amount of time saving has been achieved when implemented and the planners
consider this as a boon to them. This also helps developers as the waiting time for
sanctions have been greatly reduced.

2.0 PROMINENT PROCESS OF THE SOFTWARE

2.1 ONLINE BUILDING PLAN APPROVAL SYSTEM PROCESS

Automation of Online Building Plan Approval System is the main part of the SmartDCR
which is used by Architects as well as Officers of Greater Noida Development Authority,
GNIDA.

1. System is designed for Architects to register and submit the


drawing and get the Reference Number of the Application.

Page 2 of 62
GNIDA Smart DCR - User Manual - Version 4.3

2. This system is designed to allow an Architect to submit the drawing


and check the status of drawing online.

3. The software will facilitate communication between Architects via E-


Mail, Public can also view the status of their File Online.

4. The system also contains a relational database having list of


Architects’ details.

5. The Architects can also get their scrutiny report online using their
Reference Number.

2.2 SMART DCR SCRUTINY PROCESS

This Process will scrutinize the submitted drawing by comparing with GNIDA Bye-Laws
and generates Reports. The uploaded drawing should be in .dwg format. Architects can
check their drawing status, whether successfully submitted or Returned back through e-
mail.

3.0 OBJECTIVES

To bring transformation in the plan scrutiny processing system with speed, accuracy,
consistency and transparency in the entire scrutiny process. To achieve the goal, it is
proposed to automate the planning scrutiny process by customization with Smart DCR.

4.0 SCOPE OF THE SYSTEM

The Automation helps to increase the productivity and Accuracy of the Drawing Result.

1. Speed up the Scrutiny process.

2. Easier Public Interaction with Online System.

3. Reduce the Time consumption and Manual Errors of Scrutiny


Process.

4. Savings on the infrastructure required to store paper drawings.

5. Easy to retrieve data since the data is stored in digital format.

Page 3 of 62
GNIDA Smart DCR - User Manual - Version 4.3

5.0 DO'S AND DONT'S

5.1 DO'S

1. Bounding rectangle should be kept as a polyline containing the whole


submission drawing with floor plans, site detail, key plan, foundation detail,
culvert detail, rain water harvesting detail, compound wall detail etc The
lower left corner of the bounding rectangle to be kept in 0,0,0 Co-Ordinate.

2. Polylines shall be drawn in the form of Light Weight Polylines


(lwpolylines), as 3D polylines are not supported. They should be drawn as
closed polylines.

3. Polyline’s line thickness shall be zero.

4. Drawing objects shall be placed in model space only.

5.2 DONT'S

1. Outside the bounding rectangle, objects should not be kept. OLE objects
should not be used.

2. All drawing objects shall be in 2 Dimensional (Z-Coordinates – Zero) and


placed without any elevation.

3. Blocks, Regions, Wipeout and External references shall not be placed in


the drawing as they will not be processed.

4. The Colour coded items, i.e. polylines, lines and text which are intended to
be processed must be in the layers starting with FLOOR. Other layers will
be ignored by the software

5. Mtext will not be processed by the software and whatever text placed on
Floor layers shall be Text only.

6. Plans prepared using Educational version of AUTOCAD or other software


like REVIT cannot be accepted as its use is limited.

Page 4 of 62
GNIDA Smart DCR - User Manual - Version 4.3

6.0 DRAWING FILE SPECIFICATION

Preparation of computerized plans for SmartDCR has the following steps, which are to
be followed compulsory. Otherwise SmartDCR will not process the given drawing.

6.1 LAYERING SYSTEM TO BE FOLLOWED

1. Proposed Floor layer: FLOOR01, FLOOR02, etc…. corresponding to the


floor count.

2. Existing Floor layer: FLOOR01-EX, FLOOR02-EX, etc…corresponding to


the floor count.

3. FLOOR-STILT or FLOOR-GROUND for common Site related details.

4. For Proposed Basement floor, layer should be FLOOR-BF1, FLOOR–BF2


etc. corresponding to the Basement Floor Count.

5. For Existing Basement floor, layer should be FLOOR-BF1-EX, FLOOR–


BF2-EX etc. corresponding to the Basement Floor Count.

6. Don’t use unnecessary spaces in layer Names.

6.2 THE DRAWING FILE SHOULD HAVE THE FOLLOWING SPECIFICATIONS

Proposal Drawing should be in .DWG Format.

1. All objects to be processed by SmartDCR should be drawn using Lines,


Polylines and Text and placed in layers starting with Floor.

2. Layers and Colours should be followed as per the colour code table.

3. Remove the unused layers, dimension styles etc.

4. Drawing units should be in meters.


5. All details should be drawn in scale 1:1 (True Scale).

6. Avoid unnecessary objects in the drawing.

7. In the site plan, Front Setback should be in the Bottom Of the drawing.

8. Avoid unnecessary coordinates in polylines.

9. Don’t Overlap the Objects.

Page 5 of 62
GNIDA Smart DCR - User Manual - Version 4.3

7.0 PRECHECK SOFTWARE

Precheck is the software given for finding out all the polyline, line, and text related
problems in the drawing. When the Applicant submits the building map proposal, this
software enables the applicant to rectify the defects in the drawing and make it suitable
to run in the Scrutiny software. It reads the drawing elements and lists all the
discrepancies in the drawing. It will processes the file and gives the output with various
parameters as listed below. If errors are found in the drawing, the drawing will be
populated with hyperlinks to the errors and will be returned to the Applicant via
email.

1. Setback Boundary

2. Multiple Polyline Geometry Problems

3. Invalid object colour

4. Misplaced OTS

5. Existence of Blocks, Regions, Wipeouts & External references in Floor


layers

6. Mandatory requirements and

7. Other critical errors

In the returned drawing, error details will be displayed such as disqualified object name;
floor name and drawing coordinate position. It will also draw a crossed grey line on all
the disqualified objects throughout the returned drawing. Press Ctrl button and Click on
the hyperlink error text, then the drawing will be automatically zoomed to the error area
of the drawing and the applicant can correct and resubmit the drawing. Incase of critical
error, for example Height of the building line is missing, there will be no hyperlink.

Page 6 of 62
GNIDA Smart DCR - User Manual - Version 4.3

8.0 PROCEDURE TO CREATE A DRAWING

8.1 PARAMETERS TO BE DRAWN USING LINE OBJECTS

1. Entry Gate

2. Basement Floor Height

3. Ramp

4. Stilt Floor Height

5. Plinth Height

6. Building Height

7. Boundary Wall for all sides, individual lines for Solid wall and Grill.

8. Height of the Gate from Plinth of Boundary wall

9. Drainage and water supply

8.2 PARAMETERS TO BE DRAWN USING POLYLINE OBJECTS

1. Plot Boundary

2. Setback Boundary

3. Stilt Parking Area Boundary

4. Rain Water Harvesting Trench

5. Residential F.A.R.

6 Sunshade Front

7. Sunshade Rear

8. Sunshade Ramp – Side

9. Sunshade Other – Side

10. Setback Front

11 Setback Ramp – Side

12. Setback Other – Side

Page 7 of 62
GNIDA Smart DCR - User Manual - Version 4.3

13. Setback Rear

14. Open Parking area

15. Covered Parking area

16. Staircase Area

17. Lift

18. Balcony Projection – Front

19. Balcony Projection – Rear

20. Balcony Projection Ramp – Side

21. Balcony Projection Other Side

22. Mumty

23. Canopy

24. Total height of the building

25 Bounding Rectangle

26. Plumbing shaft or Garbage shaft or AC Shaft

27. Lift lobby

28. Cupboard

29. Softlandscape

30. Meter Room

31. Temporary Structure

32. Toilet block ( For Industrial)

33. WC, BATHROOM, URINAL

34. Watchman shelter

35. Watch tower

Page 8 of 62
GNIDA Smart DCR - User Manual - Version 4.3

8.3 PARAMETERS TO BE DRAWN USING TEXT OBJECTS

1. Usage of Residential building such as Toilet, Bed room, Kitchen etc.

2. Tree text should be kept as TREES-1 or TREES-2 or TREES-3 etc. and for
Evergreen trees text shall be kept as EVERGREENTREES-1 or
EVERGREENTREES-2 etc

3. Names of blocks

4. Typical floor text:

In the Text Objects for Typical Floors are followed as Format: “FLOOR01, FLOOR02,

FLOOR03……FLOORn th - Typical”

In the Text Objects for Typical Blocks are followed as

Page 9 of 62
GNIDA Smart DCR - User Manual - Version 4.3

9.0 DETAILS OF COLOR CODE FORMAT

Color
S.No Description Corresponding Layer
Code
Polyline Objects
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
1 Plot Boundary 7
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
2 Setback Boundary 10
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-STILT (For Proposed)
3 Stilt Parking Area Boundary 5
FLOOR-STILT-EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
Rain Water Harvesting
4 42
Trench
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
5 Residential FAR 181 Applicable floor layer*

6 Sunshade-Front 63 Applicable floor layer*

7 Sunshade-Rear 64 Applicable floor layer*

8 Sunshade-Side 65 Applicable floor layer*


FLOOR-GROUND / FLOOR-STILT(For
Proposed)
9 Setback (Front) 120
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
10 Setback (Ramp Side) 201
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
11 Setback (Other Side) 21
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
Page 10 of 62
GNIDA Smart DCR - User Manual - Version 4.3

FLOOR-GROUND / FLOOR-STILT(For
Proposed)
12 Setback (Rear) 60
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND (For Proposed)
13 Open Parking Area 111
FLOOR-GROUND-EX (For Existing)

FLOOR-STILT(For Proposed)
14 Covered Parking Area 132
FLOOR-STILT-EX (For Existing)

15 Staircase Area 115 Applicable floor layer*

16 Lift 22 Applicable floor layer*

17 Balcony Projection - Front 35 Applicable floor layer*

18 Balcony Projection - Rear 52 Applicable floor layer*

19 Balcony Projection - Side 152 Applicable floor layer*

20 Canopy 222 Applicable floor layer*

21 OTS, Cutout 3 Applicable floor layer*

22 Mumty 215 FLOOR-TERRACE

23 Industrial FAR 134 Applicable floor layer*


FLOOR-BF1 / FLOOR-BF2 (For
Proposed)
Basement Parking Area
24 5
Boundary
FLOOR-BF1-EX / FLOOR-BF2-EX (For
Existing)
FLOOR-BF1 / FLOOR-BF2 (For
Proposed)
25 Basement for storage 150
FLOOR-BF1-EX / FLOOR-BF2-EX (For
Existing)
26 Non FAR 4 Applicable floor layer*
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
27 Total Height of the Building 13
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
Page 11 of 62
GNIDA Smart DCR - User Manual - Version 4.3

FLOOR-GROUND / FLOOR-STILT(For
Proposed)
28 Bounding Rectangle 61
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
Garbage Shaft/Plumbing
29 Shaft/AC 2 Applicable floor layer*
Shaft
30 Lift Lobby 142 Applicable floor layer*

31 Cupboard 153 Applicable floor layer*


FLOOR-GROUND / FLOOR-STILT(For
Proposed)
32 Softlandscape 12
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
33 Meter Room 14
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
34 Temporary Structure 155
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
WC, Bathroom, Urinal ( for
35 81
industrial )
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
36 Watchman Shelter 54
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
37 Watch Tower 53
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
38 Commercial FAR 6 Applicable floor layer*

39 Institutional FAR 33 Applicable floor layer*

40 Block Distinguisher 50 FLOOR-GROUND / FLOOR-STILT

Page 12 of 62
GNIDA Smart DCR - User Manual - Version 4.3

Text Objects
Bed room, Kitchen, Toilet
1 181 Applicable floor layer*
etc.
Block Naming and Typical
2 50 FLOOR-GROUND / FLOOR-STILT
Block text
Typical text for identifying
3 7 Applicable floor layer*
Typical floors
FLOOR-GROUND / FLOOR-STILT(For
No. of Trees to be Planted Proposed)
4 inside the 93
Plot FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
5 Industrial Building Use 134 Applicable floor layer*
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
WC, Bathroom, Urinal ( for
6 81
industrial )
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
7 Non FAR 4 Applicable floor layer*
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
8 Evergreen Trees 92
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
9 Watchman Shelter 54
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
10 Watch Tower 53
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
11 Commercial FAR 6 Applicable floor layer*

12 Institutional FAR 33 Applicable floor layer*

13 Block Name 50 FLOOR-GROUND / FLOOR-STILT

Page 13 of 62
GNIDA Smart DCR - User Manual - Version 4.3

Line Objects
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
1 Ramp 216
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
2 Building Height 151
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
3 Basement Floor Height 123
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
4 Plinth Height 212
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
Boundary Wall (SOLID) -
5 214
Front
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
Boundary Wall (GRILL) -
6 215
Front
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
Boundary Wall (SOLID) -
7 217
Side Setbacks
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Proposed)
Boundary Wall (SOLID) -
8 218
Rear
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Height of the Gate from Proposed)
9 Plinth of 213
Boundary Wall FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)

Page 14 of 62
GNIDA Smart DCR - User Manual - Version 4.3

FLOOR-GROUND / FLOOR-STILT(For
Proposed)
10 Gate 161
FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
11 Water supply 100 FLOOR-SERVICELINE

12 Drainage 1 FLOOR-SERVICELINE

FLOOR-STILT(For Proposed)
13 Stilt Floor Height 21
FLOOR-STILT-EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Front Setback (For Proposed)
14 Commercial, Group 4
Housing, Institutional) FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Rear Setback (For Proposed)
15 Commercial, Group 3
Housing, Institutional) FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Ramp Side Setback (For Proposed)
16 Commercial, Group 6
Housing, Institutional) FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)
FLOOR-GROUND / FLOOR-STILT(For
Other Side Setback (For Proposed)
17 Commercial, Group 2
Housing, Institutional) FLOOR-GROUND-EX / FLOOR-STILT-
EX (For Existing)

Page 15 of 62
GNIDA Smart DCR - User Manual - Version 4.3

10.0 LIST OF TEXT PERMITTED INSIDE RESIDENTIAL UNITS

BED ROOM LOBBY POOJA BATH STUDY ROOM

STORE CANOPY COURT YARD PORCH CUPBOARD

DRAWING ROOM DRG.ROOM DRAWING DRG.+DINING DRG./DINING ROOM

DRG/DINING DINING DUCT TOILET FOYER

FRONT OPEN GATE PUJA GUEST ROOM KITCHEN

LAWN LIFT LIVING LIVING ROOM LOBBY

W.C MAIN GATE MUMTY PORCH POWDER ROOM

PANTRY PARAPET PLINTH

11.0 LIST OF TEXT NOT PERMITTED INSIDE RESIDENTIAL UNITS

GUEST HOUSE CANTEEN SHOP HOSTEL LODGES

12.0 LIST OF NON FAR TEXT PERMITTED

1. TOILET 11. FOUNTAIN


2. TANK 12. SWIMMING POOL
3. OPEN TRANSFORMER 13. WATER POOL
4. ELECTRICAL ROOM 14. UNDERGROUND WATER TANK
5. SEWAGE TREATMENT PLANT 15. PORCH
6. OPEN GENERATOR SET 16. HEAD ROOM
7. WATER TANK 17. GENERATOR ROOM
8. FILTRATION PLANT 18. UNCOVERED PLATFORM
9. TELEPHONE DISTRIBUTION EQUIPMENT
10. ELECTRICAL DISTRIBUTION EQUIPMENT

Page 16 of 62
GNIDA Smart DCR - User Manual - Version 4.3

13.0 LIST OF COMMERCIAL TEXT PERMITTED

SHOPPING CENTRE SECTOR SHOPPING SUB DISTRICT CENTRE HOTEL

BANK CINEPLEX MULTIPLEX CINEMA THEATRE

WAREHOUSE GODOWN CITY CENTRE RETAIL SHOP

COMMERCIAL CENTRE

14.0 LIST OF INSTITUTIONAL TEXT PERMITTED

GOVERNMENT OFFICE SEMI GOVERNMENT OFFICE BIOTECH PARK

COLLEGE NURSERY SCHOOL SOCIAL WELFARE CENTRE

ART CENTRE DISPENSARY EXHIBITION CENTRE

RELIGIOUS OLD AGE HOME UNIVERSITY

COMMUNITY CENTRE HEALTH CARE OFFICE

FILM STUDIO HEALTH CLUB HOSPITAL

CLINIC VOCATIONAL INSTITUTE FIRE STATION

TRAUMA CENTRE LODGE HIGHER SECONDARY SCHOOL

POLICE STATION MUSEUM HOSTEL

PRIMARY SCHOOL LIBRARY DHARAMSHALA

SOCIAL CULTURAL CENTRE SOCIAL ASSISTANCE SERVICE POST OFFICE

ORPHANGE OTHER UTILITIES GUEST HOUSE

NURSING HOME SPECIALIZED HEALTH CENTRE

INFORMATION TECHNOLOGY SERVICE

RESEARCH AND TRAINING CENTRE

Page 17 of 62
GNIDA Smart DCR - User Manual - Version 4.3

15.0 ANNEXURE - PARAMETERS SNAPSHOTS

Page 18 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

1 Plot Boundary shall be drawn as Polyline in Color No. 7 FLOOR-GROUND


or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
FLOOR-STILT-EX

PLOT BOUNDARY

REAR OPEN
4.59 x 1.97
HALL
D 4.71 x 5.0

STORE D
D
2.8 x 3.29

DRG ROOM BED ROOM


Plot Boundary
3.15 x 4.77 3.26 x 4.77 Polyline
W
Color
Number 7
SIDE OPEN
3.03 x 2.77
D D

W W

FRONT OPEN
10 x 2.14
MAIN GATE

1M WIDE RAMP

SITE PLAN WITH GROUND FLOOR

Page 19 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

2 Setback boundary shall be drawn as Polyline in Color No. 10 FLOOR-GROUND


or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
FLOOR-STILT-EX

SETBACK BOUNDARY

REAR OPEN
4.59 x 1.97

HALL
4.71 x 5.0
Setback Boundary
D
Polyline

D D Color

STORE Number 10
2.8 x 3.29 DRG ROOM BED ROOM

3.15 x 4.77 3.26 x 4.77


W

SIDE OPEN
3.03 x 2.77
D D

W W

FRONT OPEN
10 x 2.14
MAIN GATE

1M WIDE RAMP

SITE PLAN WITH GROUND FLOOR

Page 20 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

3 Front setback shall be drawn as Polyline in Color No. 120. FLOOR-GROUND


or
FLOOR-STILT
4 Ramp - side setback shall be drawn as Polyline in Color No. or
201. FLOOR-GROUND-EX
or
5 Other - Side setback shall be drawn as Polyline in Color No. FLOOR-STILT-EX
21.
6 Rear setback shall be drawn as Polyline in Color No. 60.

SETBACK FOR RESIDENTIAL, INDUSTRY- SINGLE BLOCK


Rear Setback
Polyline
Color
Number 60
Ramp-Side
Setback
Polyline

Other-Side Color
W3
REAR OPEN
Number 201
Setback 4.4 X 2.4 KITCHEN
2.19X2.115
BED ROOM
Polyline D
3.05X4.57
V

Color D

TOILET
Number 21 3.00X1.62
D2

W3
UP

HALL
SIDE OPEN

SIDE OPEN

5.44X2.97
1.2 X 3.2

D1
W4

RWH TREES-2 10.1 X 2.0


FRONT OPEN
MAIN GATE

1M WIDE RAMP

Front Setback SITE PLAN WITH GROUND FLOOR


Polyline
Color
Number 120

Page 21 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

3(a) Front setback shall be drawn as line in Color No. 4. FLOOR-GROUND


or
4(a) Ramp - side setback shall be drawn as line in Color No. 6. FLOOR-STILT
or
FLOOR-GROUND-
5(a) Other - Side setback shall be drawn as line in Color No. 2. EX
or
FLOOR-STILT-EX
6(a) Rear setback shall be drawn as line in Color No. 3.

SETBACK FOR COMMERCIAL, GROUP HOUSING AND INSTITUTIONAL

Ramp-Side
Setback Other-Side
Line
Rear Setback Setback
Line Line
Color
Color Color
Number 6
Number 3 Number 2

12.78

ELECTRICAL SUBSTATION

HOSTEL-2

4.30 HOSTEL-1 4.30

OPEN CAR PARKING


SOFTLANDSCAPE 328.14SQM

5M GATE

Front Setback
Line
Color
Number 4
SITE PLAN

Page 22 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

7 Car Parking stall shall be drawn as Polyline in Color No. 140. FLOOR-STILT
Covered Stilt parking area shall be drawn as Polyline in Color or
No.132. Additionally Stilt Parking area shall be drawn as FLOOR-STILT-EX
Polyline in Color No. 5.
Note: Colour No. 5 is applicable only for Stilt Parking and not
for Open Parking.

Car Parking COVERED PARKING


Stall
Polyline
STILT FLOOR PLAN Parking Area
Color Polyline
REAR OPEN
Number 140 Color
7 X 2.4
Number 5

Covered Parking
Area
Polyline
Color
Number 132

FRONT OPEN
10 X 2.0
GATE

Page 23 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

8 Car Parking stall shall be drawn as Polyline in Color No. 140. FLOOR-GROUND
Open Parking Polyline area shall be drawn in Color No. 111 or
FLOOR-GROUND-EX

OPEN PARKING

REAR OPEN
8.74 X 3.0

SUNSHADE
W2 V W2
D1

BED ROOM
3.20 x 3.50
TOILET
1.91 x 2.48
BED ROOM
3.20 x 3.50
Open Parking
Area
D2
Polyline
D1 D1
Color
Number 111

KITCHEN DRG./DING. ROOM


3.20 x 2.60 5.22 x 3.20

W3 W2
D Car stall
SUNSHADE
Polyline
Color
Number 140

CAR PARKING AREA

FRONT OPEN
8.32 x 8.54
TREES-2
MAIN GATE RWH

1M WIDE RAMP

GROUND FLOOR PLAN

Page 24 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

9 Ramp shall be drawn as line in Color No. 216. FLOOR-GROUND


or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
FLOOR-STILT-EX

RAMP

REAR OPEN

KITCHEN
7.36 x 3.80

HALL D
2.82 x 3.92

BED ROOM
7.36 x 5.03

W4 D1 W3
Ramp
Line
FRONT OPEN
Color
Number 216
MAIN GATE

1M WIDE RAMP

GROUND FLOOR PLAN

Page 25 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

10 Rain Water Harvesting Trench shall be drawn as Polyline in FLOOR-GROUND


Color No. 42. or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
FLOOR-STILT-EX

RAIN WATER HARVESTING TRENCH

REAR OPEN
W4 W4

KITCHEN
7.36 x 3.80

HALL D
2.82 x 3.92

BED ROOM
7.36 x 5.03 Rain Water
Harvesting
Polyline
Color
W4 D1 W3 Number 42

FRONT OPEN
RWH

MAIN GATE

1M WIDE RAMP

GROUND FLOOR PLAN

Page 26 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

11 Residential F.A.R. shall be drawn as Polyline in Color No. Applicable Floor


181. Layer

RESIDENTIAL F.A.R

D2

TOILET
1.50 x 2.47 V
BALCONY

W3 W4
D1 D1

BED ROOM BED ROOM


3.40 x 3.8 3.34 x 2.91

D1

D1 UP

D2

DRG. ROOM KITCHEN


2.82 x 3.92 1.88 x 2.78

25

D1
W4 W3 W3

Residential F.A.R
Polyline 1m WIDE BALCONY

Color
Number 181
FIRST FLOOR PLAN

Page 27 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

12 Commercial F.A.R. shall be drawn as Polyline in Color No. 6 Applicable Floor


and corresponding Building use text should be kept inside the Layer
boundary in Color No. 6

COMMERCIAL F.A.R

Commercial F.A.R
Polyline and Text
Color
Number 6

LIFT LIFT LOBBY


ELECTRICAL INSTALLATION

FF-18A FF-18B FF-18C FF-18D FF-18E FF-18F FF-18G FF-18H

SHOP SHOP SHOP SHOP SHOP SHOP SHOP SHOP


AHU WATER WORKS

DN
UP
D1
D2 D1 D0
R/S R/S R/S R/S R/S R/S R/S R/S

SHOPPING CENTRE

R/S R/S R/S R/S R/S R/S R/S R/S R/S R/S
D1
1200 WIDE PASSAGE
TOILET SHE

UP
DN

SHOP SHOP SHOP SHOP SHOP SHOP SHOP SHOP SHOP SHOP
TOILET HE

FF-10A FF-9 FF-8H FF-8G FF-8F FF-8E FF-8D FF-8C FF-8B FF-8A

FIRST FLOOR PLAN

Page 28 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

13 Institutional F.A.R. shall be drawn as Polyline in Color No. 33 Applicable Floor


and corresponding Building use text should be kept inside the Layer
boundary in Color No. 33

INSTITUTIONAL F.A.R
11,33

4,74

900 mm HIGH RAILING

GL

LIFT
900 mm HIGH RAILING

12 13 14 22
3,06

900 mm HIGH RAILING


10

09 08 01 25
UP
LIFT LOBBY
DN

M. D. CABIN
3.715 x 2.67 7,9

D1

D2

TOILET PANTRY
1.500 x 1.735 1.500 x 1.735 GL
V1

D2 L. TOILET D2
3.115 x 1.500
V1

GOVERNMENT OFFICE
D2 G. TOILET D2
3.115 x 1.500
V1

LIFT LIFT LOBBY

Institutional F.A.R W1
DN D

Polyline and Text UP


GL

Color
Number 33
7,9

W1 W1 GL GL

FIRST FLOOR PLAN

Page 29 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

14 Entry/Exit Gate shall be drawn as line in Color No. 161 FLOOR-GROUND


or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
FLOOR-STILT-EX

ENTRY/EXIT GATE

REAR OPEN
10.26 X 2.5

W4 W4

BED ROOM BED ROOM


3.40 x 3.80 3.34 x 2.91

D1

D1 UP

D1
Entry / Exit Gate
Line
HALL KITCHEN Color
2.82 x 3.92 1.88 x 2.78
Number 161

W4 D1 W3 W2

1m WIDE COVD. VERANDAH

FRONT OPEN
10.26 X 4.27

MAIN GATE

GROUND FLOOR PLAN

Page 30 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

15 Front sunshade shall be drawn as Polyline in Color No. 63. Applicable Floor
Layer

16 Rear sunshade shall be drawn as Polyline in Color No. 64.

17 Side sunshade shall be drawn as Polyline in Color No. 65.

SUNSHADE
Rear Sunshade Side Sunshade
Polyline Polyline
Color Color
Number 64 Number 65

W3 W4

BED ROOM BED ROOM


3.40 x 3.80 3.34 x 2.91
W6 W7

Front D1
Sunshade
Polyline D1 UP

Color
Number 63
HALL D2
2.82 x 3.92

W6 KITCHEN
1.88 x 2.78

W5

FIRST FLOOR

Page 31 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

18 Height of the building shall be drawn as Line in Color No. 151 FLOOR-GROUND
or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
FLOOR-STILT-EX

HEIGHT OF THE BUILDING

1,12
3,2
0,46
1,3
0,46 1,14

6"
4,65

1,68

4.5"
0,66
0,46

P.L.
4.5"

G.L.

Height of
the building
Line
Color
Number 151

SECTION AA

Page 32 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

19 Total Height of the building shall be drawn as Polyline in FLOOR-GROUND


Color No. 13 in the section view of the building or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
FLOOR-STILT-EX

TOTAL HEIGHT OF THE BUILDING

G.L. G.L.

Total Height of
the building
Polyline SECTION - A A

Color
Number 13 SECTION AA

Page 33 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

20 Stilt Floor height is the minimum clear height taken from the FLOOR-STILT
bottom of the stilt floor to the bottom of the roof beam. It shall or
be drawn as line in Color No. 21. FLOOR-STILT-EX

STILT FLOOR HEIGHT

TERRACE TERRACE
2.12 MT.

2.12 MT.
RCC SLAB RCC SLAB

STAIR / LIFT CABIN

TERRACE LIFT TERRACE


OTS PASSAGE OTS

RCC SLAB RCC SLAB


LANDING
2.40 MT.

2.40 MT.
LANDING
LIFT

BED ROOM PASS. OTS PASSAGE OTS PASS. BED ROOM

RCC SLAB RCC SLAB


LANDING
2.40 MT.

2.64 MT.
LANDING
LIFT

BED ROOM PASS. OTS PASSAGE OTS PASS. BED ROOM

RCC SLAB RCC SLAB


11.76 MT.

11.76 MT.
LANDING
2.40 MT.

2.40 MT.

LANDING
LIFT

BED ROOM PASS. OTS PASSAGE OTS PASS. BED ROOM

RCC SLAB RCC SLAB


LANDING
2.40 MT.

2.40 MT.

LANDING
LIFT

BED ROOM PASS. OTS PASSAGE OTS PASS. BED ROOM

RCC SLAB LANDING RCC SLAB


2.16 MT.

1.92 MT.

LANDING
LIFT

PASSAGE
GL PARKING SPACE PARKING SPACE GL

SECTION - A A
Stilt Height
Line
Color
Number 21

Page 34 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

21 Basement Floor height is the distance measured between the FLOOR-BFx


bottom of the basement floor and roof of the same basement where 'x' is the
floor level. It shall be given as line in Color No. 123. If there is basement floor
more than one basement floor, its height shall be given in the number.
corresponding basement floor layer.

BASEMENT FLOOR HEIGHT

Basement Floor
Height
Line
Color
Number 123

G.L. G.L.

SECTION - A A

Page 35 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer


22 Plinth height shall be drawn as line in Color No. 212. FLOOR-GROUND
23
or
Boundary wall (for SOLID) Front shall be drawn as line in Color No. 214
FLOOR-STILT
24 Boundary wall (for GRILL) Front shall be drawn as line in Color No. 215. or
25
FLOOR-GROUND-
Boundary wall (for SOLID) Side shall be drawn as line in Color No. 217
EX
26 Boundary wall (for SOLID) Rear shall be drawn as line in Color No. 218. or
FLOOR-STILT-EX
27 Height of the gate from Plinth of boundary wall shall be drawn as line
Color No. 213.

HEIGHT OF THE PLINTH,


GATE AND COMPOUND WALL
Height of the Gate Boundary wall
from Plinth of (for Solid) Front
boundary wall Line
Color
Line Boundary wall
Number 214
Color (for Grill) Front
Number 213
Line
Color
Number 215

900

OUTSIDE 1000

LVL+350 PL. LVL

LVL+000

COMPOUND WALL
Scale 1:100

Boundary wall Boundary wall


Plinth Height (for Solid) Side (for Solid) Rear
Line Line Line
Color Color Color
Number 212 Number 217 Number 218

Page 36 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

28 For Typical Floors, Text shall be kept in Color 7 and it should Corresponding
kept be in corresponding layer Floor Layer

TYPICAL FLOOR TEXT

W3 W4

BED ROOM BED ROOM


3.40 x 3.80 3.34 x 2.91
W6 W7

D1

D1 UP

Typical Floor
HALL D2
2.82 x 3.92 Text
Color
Number 7
W6 KITCHEN
1.88 x 2.78

W5

FLOOR01,FLOOR02-TYPICAL
TYPICAL FLOOR PLAN( FIRST AND SECOND )

Page 37 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

29 Lift shall be drawn as Polyline in Color No. 22. Staircase shall FLOOR-GROUND
be drawn as Polyline in Color No.115. or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
FLOOR-STILT-EX

LIFT AND STAIRCASE

W W

WATER CLOSET
V
1.81 X 2.19
KITCHEN
2.00 x 3.00
D1

BED ROOM

Ventilation shaft 3.0 x 4.5


O
1.81 x 1.19
1

W HALL
4.93 X 3.92
LIFT

2.0 X 2.0

Staircase FIRST FLOOR PLAN Lift


Polyline Polyline

Color Color

Number 115 Number 22

Page 38 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

30 Front Balcony shall be drawn as Polyline in Color No. 35. Applicable Floor
Rear Balcony shall be drawn as Polyline in Color No. 52. Layer
Side Balcony shall be drawn as Polyline in Color No. 152.
They should be drawn on the same layer in which F.A.R
Polyline is drawn.

BALCONY
Rear Balcony
Polyline
Color
Number 52

W3
REAR OPEN

1m WD. BALCONY Above


KITCHEN
2.91 x 2.11 Side
BED ROOM
V D
3.05 x 4.57 Balcony
D
Polyline
TOILET
3.0 x 1.62
D2
Color
DRG./DIN. Number 152
3.41 x 5.37 D1
D W3
UP

BED ROOM
SIDE OPEN

3.11 x 3.40

D1 D1
W4 W3 W3

1mWD. BALCONY Above

RWH
FRONT OPEN
MAIN GATE
Front
1M WIDE RAMP
Balcony
Polyline
Color
Number 35

SITE PLAN WITH GROUND FLOOR

Page 39 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

31 Canopy shall be drawn as Polyline in Color No. 222. FLOOR-GROUND


or
FLOOR-STILT
or
FLOOR-GROUND-EX
or
32 Open to sky and Duct shall be drawn as Polyline in Color No. FLOOR-STILT-EX
or
3. FLOOR01
or
FLOOR01-EX

CANOPY, OPEN TO SKY AND DUCT


Open to Sky
and Duct
Polyline
Color
Number 3

W W

HALL
7.7 X 4.16
OTS

D D
KITCHEN BED ROOM BED ROOM
2.27 X 2.67 2.55 X 3.86 2.63 X 3.86

W
W

CANOPY W

Canopy
Polyline
Color
Number 222

GROUND FLOOR PLAN

Page 40 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

33 Mumty shall be drawn as Polyline in Color No. 215. FLOOR-TERRACE

MUMTY
0.75M WIDE PROJECTION

Mumty
Polyline
Color
Number 215

TERRACE

SLOPE

0.75M WIDE PROJECTION

MUMTY TERRACE PLAN

Page 41 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

34 Tree text to be kept in Color No. 93. Applicable Floor


If there is one Tree, text should be kept as TREES-1 Layer
If there are two Trees, text should be kept as TREES-2.
Evergreentrees text shall be kept in Color No. 92

TREE

REAR OPEN
TOILET
V 1.50 x 2.47 8.27 X 3.52

D2 W3 W4
D1 D1

BED ROOM BED ROOM


Evergreentrees
3.40 x 3.80 3.34 x 2.91
Text
Color
Number 92
D1

D1 UP

D2 Tree
Text
Color
DRG. ROOM KITCHEN
2.82 x 3.92 Number 93
1.88 x 2.78

D1
W4 W3 W3
FRONT OPEN
EVERGREENTREES-2 TREES-3

GROUND FLOOR PLAN

Page 42 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

35 Industrial F.A.R. shall be drawn as Polyline in Color No. 134 FLOOR-GROUND


or
FLOOR-GROUND-EX
or
FLOOR01
or
FLOOR01-EX

INDUSTRIAL F.A.R
W W
R/S

W W

INDUSTRIAL

W
PRODUCTION HALL W

13.04X 39.84
loading/unloading

R/S

R/S

TOILET
1.80X2.10

UP
W

Industrial F.A.R R/S

Polyline and Text


R/S
W W

Color
Number 134
GROUND FLOOR PLAN

Page 43 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

36 WATCHMAN SHELTER shall be drawn as Polyline in the FLOOR-GROUND


Color No.54 and text to be kept inside. WATCH TOWER shall or
be drawn as Polyline in the Color No.53 and text to be kept FLOOR-GROUND-EX
inside. or
FLOOR-STILT
or
FLOOR-STILT-EX

WATCHMAN SHELTER AND WATCH TOWER ( FOR INDUSTRY)

WATCH TOWER
REAR SETBACK 4.5 WIDE
D

WATCH TOWER
Polyline and Text
Color
Number 53

PROPOSED INDUSTRY
SIDE SETBACK 3.0 WIDE

SIDE SETBACK 4.23 WIDE

WATCHMAN SHELTER
Polyline and Text
Color
Number 54
WATCHMAN SHELTER

GATE

SITE PLAN

Page 44 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

37 Basement for storage shall be drawn as Polyline in Color FLOOR-BF1


No.150 or
FLOOR-BF1-EX
or
FLOOR-BF2
or
FLOOR-BF2-EX

BASEMENT FOR STORAGE

Basement for
Storage
Polyline
Color
Number 150

Storage

BASEMENT PLAN

Page 45 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

38 NON F.A.R area like Generator room, Electrical room area Applicable Floor
shall be drawn as Polyline in Color No.4 and Text shall be Layer
placed in the same layer

NON F.A.R

Generator Room
Polyline and Text
Color
Number 4

LIFT
2.24 x 2.40

UP

Generator room
1.74 X 3.23

BASEMENT PLAN

Page 46 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

39 COMPOUND WALL detail, CULVERT detail, FOUNDATION FLOOR-GROUND


detail, RAINWATER HARVESTING detail and Key plan text or
should be kept in Color No.141 FLOOR-GROUND-EX
or
FLOOR-STILT
or
FLOOR-STILT-EX

COMPOUND WALL , CULVERT, FOUNDATION,


RAINWATER HARVESTING AND KEY PLAN DETAIL

COMPOUND WALL CULVERT gate


0.90
1.00
OUTSIDE

Text RAILING Text


INSIDE

+0.35 PL. ram


MS p

Color Color pipe

1.00LVL+0.35 pipe
Number 141 PL. LVL Number 141 drain

LVL+000
SCALE 1:1
SCALE 1:1 CULVERT DETAIL
COMPOUND WALL DETAIL

BOUL DERS

L
0.5
COARSE SAND
1.5-2.0 MM
FOUNDATION RAINWATER HARVESTING
0.5
GRAVELS
0.45 5-10 MM
L BOUL DERS
0.5

Text 0.15 Text 5-20 MM pipe

0.15
Color 0.15 0.75 Color
0.15
Number 141 0.15 Number 141
0.75
SCALE 1:50

FOUNDATION DETAIL RAINWATER HARVESTING DETAIL


I-164

KEY PLAN
Text
I-229

I-230

I-231

Color
Number 141 9.00 M WIDE ROAD

KEY PLAN
NOT TO SCALE

Page 47 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

40 Door and Window Schedule text shall be kept in Color No. 141 FLOOR-GROUND
in the Title Block. or
FLOOR-GROUND-EX
or
FLOOR-STILT
or
FLOOR-STILT-EX

DOOR AND WINDOW SCHEDULE


DOOR AND
WINDOW
SCHEDULE
TEXT
Color
Number 141
BRICK TILES
MUD PUSKA DOOR AND WINDOW SCHEDULE
HOT BITUMEN TWO COATS
R.C.C SLAB
230
TYPE SIZE CILL LVL. LINTEL LVL. NOS.
450

690 D 0.750X2.10 - 2.10 1


750

D1 1.0X2.70 - 2.10 3
1.25
KITCHEN FOUNDATION DETAIL D2 1.2X2.70 - 2.10 2
N.T.S
BED ROOM BED ROOM
W1 0.90X1.05 0.90 2.10 1
W2 1.20X1.65 1.05 2.10 1
FRONT ELEVATION 230
W3 1.20X1.20 0.90 2.10 1
450

690 V 0.60X1.20 1.50 2.10 1


750

4.31 2.16 TOTAL PLOT AREA=11.0X20.0=220.0 SQM


F.A.R.=180
FOUNDATION DETAIL TOTAL PERM. COVD. AREA ON ALL FLOORS=1.8X220.0=396 SQM
2.1 HT.BOUNDARY WALL FROM DRAIN TOP N.T.S
SECTION AT BB PERM. COVD. AREA ON GR. FL.@75%=165 SQM
REAR OPEN 0.59 BY PASS SYSTEM PROPOSED COVD. AREA ON G. FLOOR= (11.00X7.500)=82.5 SQM
11.0 X 3.0 1.18 DRAINAGE SYSTEM
COVD. AREA OF BALCONY=00.00 SQM
AREA OF STAIR CASE=00.00 SQM
OVERFLOW MAIN DRAINAGE

SUNSHADE COVD. AREA OF MUMTY=00.00 SQM


W2 W1
1500 TOTAL COVD. AREA FREE FROM F.A.R.=82.5 SQM
D1
TOTAL COVD. AREA=82.5 SQM
1.47 TOTAL COVD. AREA COUNTED IN F.A.R=82.5 SQM
0.6 MM.DIA MAINHOL COVER
KITCHEN
PLAN SCALE 1:25 PARKING CALCULATION
2.00 x 3.18 BEDROOM
BED ROOM
4.14 x 4.27 4.17 x 4.27 TOTAL COVD. AREA=396 SQM
A A PLAN WATER HARVESTING PARKING REQ.=396/100=3.96 ECS= SAY 4
COVD. PARKING AREA REQ.=4X20.0=80.0 SQM
D1
OPEN PARKING PROVIDED=
2.94
FLOOR LEVEL

PVC PIPE 10 MAIN DRAIN =(11.00X9.500)=104.5 SQM


D1 D1
150 Ø PVC PIPE INFLOW

W1
D2
1.86
TOILET
VERANDA 2.38 x 2.54
8.05 x 2.77 18000 mm
DP TO
REQUIRED

V ENV SITE PLAN


FRONT SET BACK
G.F PLAN
SECTION WATER HARVESTING
11.0 x 9.5 0.75M WIDE
SUNSHADE
CAR PARKING 1500
SLOPE
1.05M HIGH PARAPET
KHURA
SLOPE

TOP OF DRAIN

DRAIN

3.72 CULVERT DETAIL


TOP OF DRAIN

BOUNDARY WALL

TERRACE
A-285
TREES-2
RWH
A-300
GATE A-299SEC.-02 A-301
1.35 HT. BOUNDARY WALL +0.8 HT.
RAILING FROM TOP OF DRAIN
1M WIDE RAMP 9.0 M. WIDE ROAD
GROUND FLOOR PLAN TERRACE PLAN KEY PLAN

Page 48 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

41 BED ROOM, TOILET AND KITCHEN text should be kept in Applicable floor
Color No. 181 layer

BED ROOM, TOILET AND KITCHEN

6.00

1.92 0.97
0.12 3.00

D2
2.00 TOILET REAR OPEN 2.00
TOILET 1.8 x 1.88
V 3.97 X 2.00

Text D1 D1
0.23
Color
Number 181 BED ROOM BED ROOM 3.37
3.71 2.85 x 3.70 2.80 x 3.125

BED ROOM 10.00 10.00


Text D1

Color D1
0.12

Number 181 KITCHEN 3.13


2.22 2.85 x 2.22

KITCHEN D1
W UP
Text 0.23 FRONT OPEN
1.50 TREES-2 6.00 X 1.50 1.50
Color MAIN GATE

Number 181 1M WIDE RAMP 1.00

GROUND FLOOR PLAN

Page 49 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

42 Drainage shall be drawn as line in Color No. 1 and Water FLOOR-SERVICELINE


supply shall be drawn as line in Color No. 100

WATER SUPPLY AND DRAINAGE

7.2000

1800 HT. 9. WALL TOP OF PL.

REAR OPEN
8.74 x 3.0

W2 V W2
D1
TOILET
WATER SUPPLY 1.91 x 2.48
BED ROOM
3.20 x 3.50
Line BED ROOM
3.20 x 3.5
Color D2

Number 100
D1 D1
DRAINAGE
Line

KITCHEN DINING Color


3.20 x 2.6 5.22 x 3.20
Number 1
14.4000
D
W2
W3

GT IC

MH

FRONT OPEN

RWH TREE-2

MAIN GATE
1000 HT.BOUNDARY WALL

WATER SUPPLY LINE 900 HT .RAILING TOP OF PLINTH 1M WD. RAMP

0.8000

GROUND FLOOR PLAN

Page 50 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

43 Softlandscape shall be drawn as Polyline in Color No. 12 Applicable Floor


Layer

SOFTLANDSCAPE

REAR OPEN

SOFTLANDSCAPED AREA=248.20 Sqm.

7
SIDE OPEN
6000 WIDE

SIDE OPEN
6000 WIDE

6
PROPOSED AREA
=23.00X45.00=1035.00 Sqm.
CAR PARKING AREA=4.70X39.272=184.57 SQM.

Softlandscape
3

Polyline
Color 2

Number 12
1

FRONT OPEN

CAR PARKING AREA=20.50X5.77=118.28 SQM.


GATE GATE

SITE PLAN

Page 51 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

44 Temporary structure shall be drawn as polyline in Color No. FLOOR-GROUND


155 or
FLOOR-GROUND-EX
or
FLOOR-STILT
or
FLOOR-STILT-EX

TEMPORARY STRUCTURE ( FOR INDUSTRIAL )

TEMPORARY STRUCTURE
REAR OPEN 4X1

Temporary
SIDE OPEN

structure
SIDE OPEN

Polyline PROPOSED AREA


6

=23.00X45.00=1035.00 Sqm.

Color
CAR PARKING AREA=4.70X39.272=184.57 SQM.

Number 155
4

FRONT OPEN

GATE GATE

10M WIDE ROAD

SITE PLAN

Page 52 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

45 Toilet area shall be drawn as polyline in Color No. 4 and text FLOOR-GROUND
shall be kept inside color 4 polyline. or
FLOOR-GROUND-EX
or
FLOOR-STILT
or
FLOOR-STILT-EX

TOILET ( FOR INDUSTRY)

TEMPORARY STRUCTURE
REAR OPEN 4X1
SIDE OPEN

Toilet
SIDE OPEN

Polyline and text PROPOSED AREA


=23.00X45.00=1035.00 Sqm.

Color
Number 4

FRONT OPEN

WC BATHROOM
1.50X1.50 1.50X1.50

URINAL

TOILET
3.12X6.81 URINAL

D
GATE

10M WIDE ROAD

SITE PLAN

Page 53 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

46 WC, BATHROOM and URINAL shall be drawn as polyline in FLOOR-GROUND


Color No. 81 and text shall be kept inside color 81 polyline. or
FLOOR-GROUND-EX
or
FLOOR-STILT
or
FLOOR-STILT-EX

WC, BATHROOM, URINAL

TEMPORARY STRUCTURE
REAR OPEN 4X1

WC, BATHROOM,
SIDE OPEN

URINAL
SIDE OPEN

Polyline and text PROPOSED AREA


=23.00X45.00=1035.00 Sqm.

Color
Number 81

FRONT OPEN

WC
BATHROOM
1.50X1.50 1.50X1.50

URINAL

URINAL

TOILET
3.12X6.81 D
GATE

10M WIDE ROAD

SITE PLAN

Page 54 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

47 Bounding rectangle shall be drawn as polyline in Color No 61. FLOOR-GROUND


Entire drawing should be kept inside the Bounding or
rectangle.If there are any objects found outside Bounding FLOOR-GROUND-EX
rectangle, drawing will be marked as error by the Precheck or
FLOOR-STILT
software.
or
FLOOR-STILT-EX

BOUNDING RECTANGLE

BOUNDING RECTANGLE
Polyline
Color
Number 61

BRICK TILES
MUD PUSKA DOOR AND WINDOW SCHEDULE
HOT BITUMEN TWO COATS
R.C.C SLAB
230
TYPE SIZE CILL LVL. LINTEL LVL. NOS.
450

690 D 0.750X2.10 - 2.10 1


750

D1 1.0X2.70 - 2.10 3
1.25
KITCHEN FOUNDATION DETAIL D2 1.2X2.70 - 2.10 2
N.T.S
BED ROOM BED ROOM
W1 0.90X1.05 0.90 2.10 1
W2 1.20X1.65 1.05 2.10 1
FRONT ELEVATION 230
W3 1.20X1.20 0.90 2.10 1
450

690 V 0.60X1.20 1.50 2.10 1


750

4.31 2.16 TOTAL PLOT AREA=11.0X20.0=220.0 SQM


F.A.R.=180
FOUNDATION DETAIL TOTAL PERM. COVD. AREA ON ALL FLOORS=1.8X220.0=396 SQM
2100 HT.BOUNDARY WALL FROM DRAIN TOP N.T.S
SECTION AT BB PERM. COVD. AREA ON GR. FL.@75%=165 SQM
REAR OPEN 0.59 BY PASS SYSTEM PROPOSED COVD. AREA ON G. FLOOR= (11.00X7.500)=82.5 SQM
1.10 x 3.0 1.18 DRAINAGE SYSTEM
COVD. AREA OF BALCONY=00.00 SQM
AREA OF STAIR CASE=00.00 SQM
OVERFLOW MAIN DRAINAGE

COVD. AREA OF MUMTY=00.00 SQM


SUNSHADE
W2 W1
1500 TOTAL COVD. AREA FREE FROM F.A.R.=82.5 SQM
D1
TOTAL COVD. AREA=82.5 SQM
1.47 TOTAL COVD. AREA COUNTED IN F.A.R=82.5 SQM
600 MM.DIA MAINHOL COVER
KITCHEN
PLAN SCALE 1:25 PARKING CALCULATION
2.00 x 3.18 BEDROOM
BED ROOM
4.14 x 4.27 4.17 x 4.27 TOTAL COVD. AREA=396 SQM
A A PLAN WATER HARVESTING PARKING REQ.=396/100=3.96 ECS= SAY 4
COVD. PARKING AREA REQ.=4X20.0=80.0 SQM
D1
OPEN PARKING PROVIDED=
2.94
FLOOR LEVEL

PVC PIPE 10 MAIN DRAIN =(11.00X9.500)=104.5 SQM


D1 D1
150 Ø PVC PIPE INFLOW

W1
D2
1.86
TOILET
VERANDA 2.38 x 2.54
8.05 x 2.77 18000 mm
DP TO
REQUIRED

V ENV SITE PLAN


FRONT SET BACK
G.F PLAN
SECTION WATER HARVESTING
11.0 x 9.5
SUNSHADE
CAR PARKING 1500
SLOPE
1.05 M HIGH PARAPET
KHURA
SLOPE

TOP OF DRAIN

DRAIN

3.72 CULVERT DETAIL


TOP OF DRAIN

BOUNDARY WALL

TERRACE
A-285
TREES-2
RWH
A-300
GATE A-299SEC.-02 A-301
1.35 HT. BOUNDARY WALL +0.8 HT.
1M WIDE RAMP
RAILING FROM TOP OF DRAIN
9.0 M. WIDE ROAD
GROUND FLOOR PLAN TERRACE PLAN KEY PLAN

The lower left corner of the Bounding rectangle to be kept in 0,0, co-ordinate

Page 55 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

48 Building blocks shall be distinguished from each other in case FLOOR-GROUND


of Group Developments. Distinguishing of blocks shall be or
FLOOR-GROUND-EX
drawn by Polylines in Color No. 50 along with Block names as
or
text in the same Color for identifying individual blocks present FLOOR-STILT
such as Block-A, Block-B. The individual floor plans shall be or
drawn completely within Color No. 50 Polyline. In Site plan, FLOOR-STILT-EX
building footprint polyline shall be drawn in Color No. 10 and
Block name text shall be kept in Color No. 50 for each block

Building footprint
JOINERY DETAILS
SEWAGE TREATMENT PLANT
MD Main Door 1.0M X 2.18M Polyline
W Window 1.0M X 1.05M

4M WIDE DRIVEWAY
V1 Ventilator 0.9M X 0.6M

D Door 0.9M X 2.18M Color


D2 Door 0.76M X 2.18M

Number 10
AREA STATEMENT SQM.
Block Name
SITE AREA = 1958.29 SQ.M

BLOCK 1

FLOOR NAME FSI NON FSI


Text
STILT FLOOR 200.71

LIFT LIFT
FIRST FLOOR 200.71
Color
TOTAL 200.71 Number 50
4M WIDE DRIVEWAY 4M WIDE DRIVEWAY

BLOCK 1 BLOCK 2
SCALE - 1 : 100
N
W

ALL DIMENSION ARE IN METER


S

APPLICANT

ARCHITECT SIGNATURE

GATE 4.50 M. GATE 4.50 M.

Block Distinguishers
Polyline & Text
ROAD WIDTH 20.5M

Color
20.5M WIDE ROAD
Number 50
20.5M WIDE ROAD

proposed site

KEY PLAN
N.T.S

BLOCK 1 BLOCK 2

JOINERY DETAILS JOINERY DETAILS

W W V
MD Main Door 1.0M X 2.18M W W V
MD Main Door 1.0M X 2.18M

TOILET
W Window 1.0M X 1.05M TOILET
W Window 1.0M X 1.05M
KITCHEN DINING 1.22 X 1.99 KITCHEN DINING 1.22 X 1.99

3.48 X 2.10 4.36 X 2.10 3.48 X 2.10 4.36 X 2.10


D D
D2
V1 Ventilator 0.9M X 0.6M D2
V1 Ventilator 0.9M X 0.6M
1
D Door 0.9M X 2.18M D Door 0.9M X 2.18M
W BED ROOM W W BED ROOM W
4.48 X 2.81 4.48 X 2.81
HALL HALL
D D2 Door 0.76M X 2.18M D D2 Door 0.76M X 2.18M
4.69 X 5.85 4.69 X 5.85

D D

W BED ROOM W W BED ROOM W


4.48 X 2.81 4.48 X 2.81

MD MD

AREA STATEMENT SQM. AREA STATEMENT SQM.


LIFT LIFT LIFT MACHINE ROOM LIFT LIFT LIFT MACHINE ROOM
SITE AREA = 1958.29 SQ.M SITE AREA = 1958.29 SQ.M

DUCT BLOCK 1 DUCT BLOCK 1

FLOOR NAME FSI NON FSI FLOOR NAME FSI NON FSI
W W

STILT FLOOR 200.71 STILT FLOOR 200.71

MD
FIRST FLOOR 200.71 MD
FIRST FLOOR 200.71
W BED ROOM W W BED ROOM W

4.48 X 2.81 4.48 X 2.81


D D

C C C C C C C C C C C C
D 2 D
HALL HALL

W BED ROOM
4.69 X 5.85 W
TOTAL 200.71 W BED ROOM
4.69 X 5.85 W
TOTAL 200.71
4.48 X 2.81 4.48 X 2.81

D2 D2
D D
KITCHEN DINING TOILET KITCHEN DINING TOILET

3.48 X 2.10 4.36 X 2.10


1.22 X 1.99
3.48 X 2.10 4.36 X 2.10
1.22 X 1.99

W W V W W V

SCALE - 1 : 100 SCALE - 1 : 100


N

N
W

ALL DIMENSION ARE IN METER ALL DIMENSION ARE IN METER


S

S
E

STILT FLOOR FIRST FLOOR TERRACE FLOOR APPLICANT STILT FLOOR FIRST FLOOR TERRACE FLOOR APPLICANT

ARCHITECT SIGNATURE ARCHITECT SIGNATURE

G.L G.L G.L G.L G.L G.L G.L G.L

ELEVATION SECTION C-C ELEVATION SECTION C-C

Page 56 of 62
GNIDA Smart DCR - User Manual - Version 4.3

16.0 PRECHECK ERRORS AND CORRECTION PROCEDURE

Page 57 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

1 After Precheck software completes processing, if the drawing NA


contains errors then those errors will be marked as text in the
returned drawing. Press Ctrl button and Click on the hyperlink
text, the error area will be automatically zoomed for error
correction.
Note: Hyperlink is not applicable for critical errors and missing
items. We have to add missing objects and after solving
critical errors, the drawing can be resubmitted.

RETURNED CAD DRAWING WITH HYPERLINK ERROR

Missing mandatory item - SetBack-Rear line is not found -


Objects overlap - Others FLOOR-GROUND 140 - 63.72,260.43_66.02,265.23
Critical error - One or more Color 10 polylines, i.e. Setback boundaries are missing in the site -
Critical error - Height of the Building as line is not present in the Block, FACTORY SHED. -
Block name is not found in colour 10 polyline - FLOOR-GROUND 10 - 55.16,197.34_120.16,225.34

BOUL DERS
0.5

COARSE SAND
1.5-2.0 MM
0.5

GRAVELS by pass system


5-10 MM
BOUL DERS 600 mm dia
1050 HT.PARPAT WALL
0.5

5-20 MM pipe

P 0.23 L drainage
P L system
REAR BAL.COVD AREA
(5.28X1.00)+(1.00X1.40)=6.68X2=13.36 SQM.
0.45 1050 HT.PARPAT WALL
G L 0.45 M.Dia
G L 150 MM DIA BORE FILLED
0.15 WITH GRAVELS 3-6 MM
13M

0.15
1050 HT.PARPAT WALL

1050 HT.PARPAT WALL

600 mm dia 600 mm dia


0.15 mainhole cover mainhole cover

0.15 0.15
0.15 0.9 0.15 0.75 pipe

0.15 0.15
0.15 WATER HARVESTING PLAN & SECTION
0.15
0.9 0.75
FOUNDATION DETAIL RAINWATER HARVESTING DETAIL DOOR AND WINDOW SCHEDULE

SCALE 1:50
450 HT.P.WALL 450 HT.P.WALL D 1000X2100 W2 5000X1500
D1 900X2100 W2 900X1500
STAIR CASH TERRACE
D1 D2 750X2100 V 450X600
T= .250 DN
R=.200 DRAWN BY:- AR. SHAKEEL
W=1.00

1050 HT.PARPAT WALL 1050 HT.PARPAT WALL 1050 HT.PARPAT WALL

SCALE 1:100
N

KITCHEN BED ROOM


1050 HT.PARPAT WALL

1050 HT.PARPAT WALL

1050 HT.PARPAT WALL BAL. BAL.


ARAE:- STATEMENT
PLOT AREA = 118.50 SQM.
PERM. COVD . ON G.F. =118.50X75%= 88.875 SQM.
OPEN AREA ON G.F.=(7.90X2.00)+(1.64X.88)+(5.28X2.40)
FRONT BAL.COVD. AREA
STILT STILT 7.90X1.00=7.90X2=15.80 SQM. TOTAL OPEN =(15.80+1.45+12.67)= 29.92 SQM.
PROP.COVD AREA STILT F.=118.50-29.92=88.58 SQM
1050 HT.PARPAT WALL
G.L PROP.COVD AREA UPPER G.F.= 88.58 SQM
P.L
FLOOR FINISHING

TERRACE FLOOR PLAN COVD.AREA OF STAIR CASE


FRONT ELEVATION SECTION AT- AA 100 MM P.C.C.
150 MM BRICK BATS
EARTH FILLING SCALE 1:100
SITE ENVELOPE PLAN (FREE FROM FAR)=2.17X3.42= 7.42 SQM.
(MUMTY PLAN.) OF STILT PARKING COVD.AREA OF MUMTY
(FREE FROM FAR)=2.28X3.53 = 8.04 SQM.
1800 HT. 9. WALL TOP OF PL.
COVD.AREA OF BALCONY.
450 HT.P.WALL

450 HT.P.WALL

1800 HT. 9. WALL TOP OF PL.


(FREE FROM FAR)= 29.16 SQM.
E

REAR OPEN REAR OPEN


AC

LVL+350
TOTAL COVD AREA ALL FL.
RR

A TOILET OPEN
TE

2.39X2.29 V
750 WD. S/S 1000 WD PROJECTION (C) (INCLUDING STILT+STAIR CASH +MUMTY +BAL.)
1050 HT.PARPAT WALL
1000 WD BALCONY (88.58+88.58+29.16+8.04)= 241.36 SQM.
W W
D1 TOTAL COVD AREA ALL FL.
TOILET MUMTY TERRACE (EXCLUDING STILT+STAIR CASH+MUMTY+BAL.)
1.885X2.525 SCALE 1:100 (G.F.=88.58)-7.42 = 81.16 SQM.
KITCHEN BED ROOM
2.50X4.64 2.825X4.64
F.A.R. = 68.48
BED ROOM BED ROOM
3.91X3.35 3.65X3.35 RE-CONSTRUCTION .RESI
BLDG.PLAN ON PLOT
C-168

D1 D1 NO:-C-168 SECTOR-37
UP

GREATER NOIDA (U.P.)


UP

D2 D1

TOILET 12.00 M WIDE ROAD


1.52X2.31 STAIR CASE
OWNER:- PANKAJ GOYAL
LIVING ROOM KEY PLAN
3.87X3.30 AREA FREE NOT TO SCALE

FROM F.A.R.
SHAFT RAILING
1.52X.88 SHAFT OPEN
1.52X.88
(B)
INSIDE

D1
COMP. WALL

LVL+350
OUTSIDE

PL. LVL
KITCHEN LVL+000
4.21X3.49 3.35X3.49 OWNER SIGN.
FRONT OPEN
COMPOUND WALL DETAIL
SCALE 1:200
D D1
1000 WD PROJECTION W W2
gate
FRONT OPEN 1000 WD BALCONY
1050 HT.PARPAT WALL
MAIN GATE LVL+350 A OPEN +350 PL. ram
p
TREE-2 (A) MS

1000 HT.BOUNDARY WALL MAIN GATE pipe

RAMP 900 HT .RAILING TOP OF PLINTH


1000 HT.BOUNDARY WALL
pipe
RAMP 900 HT .RAILING TOP OF PLINTH
drain

EXIST.GROUND FLOOR PLAN


UPPER G. FLOOR PLAN SCALE 1:100
SITE ENVELOPE PLAN
SCALE 1:100 STILT PARKING FLOOR PLAN (PROP.) OF UPP.G.F. CULVERT DETAIL
SCALE 1:100
(TO BE DEMOLISHED COVD. AREA 40.29 SQM.) SCALE 1:100

(PROP.)

ARCH. SIGN.........

Hyperlink error

Page 58 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

2 If there is no building use text inside Industrial FAR 134 NA


polyline, then precheck software will mark the error in the cad
drawing as shown below. To correct this error, place Building
use text inside Industrial FAR 134 polyline.

Building use text is not found

W W
R/S

W Building use text is not found W

W
PRODUCTION HALL W

13.04X 39.84
loading/unloading

R/S

R/S

TOILET
1.80X2.10

UP
W

R/S

R/S
W W Building use text is not found error

Page 59 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

3 If building use text are overlapped, then precheck software NA


will mark the error in the cad drawing as shown below. To
correct this error, remove the overlapped text.

TEXT OVERLAP

W W
R/S

W
Text overlap W

INDUSTRIAL
INDUSTRIAL

W
PRODUCTION HALL W

13.04X 39.84
loading/unloading

R/S

R/S

TOILET
1.80X2.10

UP
W

W
text overlap error
W

R/S

R/S
W W

GROUND FLOOR PLAN

Page 60 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

4 If Non FAR text is not kept inside Color No.4 polyline, then NA
precheck software will mark the error in the cad drawing as
shown below. To correct this error, place Non FAR text inside
Color No.4 polyline.

Non FAR text is either not found or not completely enclosed in polyline

1,63 0,82 1,98 1,71 0,31


A' 2,03 2,35 1,63
0,27

1,02 0,9
0,91

PATIO

0,68 1,15 0,73


W1 0,61 0,73
W1 0,76 1,03 0,59
0,43 1 0,15
1,46
2

0,59 0,55 2,27 3,82


1,83 1,55
0,41
0,46

BALCONY
1,55 D2
0,59

V1 V1
0,92
1,01

0,46 1,3

10 9 8 0,84 1,28
D2 11 7
1,55

0,27

PANTRY 12 6 TOILET
0,91

0,74 13 5
OFFICE
2,29

14 4
0,63

1,3

CAR PARKING 15 3 D3 TOILET


TOILET
V1 16 2
D2 17 1
1,21

D3 0,45
0,73

0,84

0,85

0,85
0,46

D3 D3
2,67

D2 0,01
0,59

0,74 1,83 D2
1,84
7,33

ENTRANCE FOYER
7.33
V1 1,55 D2
1,01

TOILET
1,17

2,19 2,19
2,19

SERVANT ROOM
0,64

0,64

D1
1,76

D3 RECEPTION + WAITING W2 W2
1,55

GUEST ROOM
0,73
0,37
0,92
0,75

0,75

0,75

1 2 D2 1,56
0,73 0,62 0,73 2
0,82 1,14 1 1,88 0,6 0,73
2,19
0,38

W1 W1 W1
1,09

1,1

GARDEN
1,83

1,65 0,38

10,99 12,54

9M WIDE ROAD

Non FAR text is either not found or not completely enclosed in polyline

Page 61 of 62
GNIDA Smart DCR - User Manual - Version 4.3

S.No Description Layer

5 If Height of the builiding color 151 line is not kept in drawing, NA


then precheck software will mark the error in the cad drawing
as shown below. To correct this error, draw Height of the
building Color No.151 line.

Critical error - Height of the Building as line is not present in the drawing

G.L. G.L.

SECTION - A A

Page 62 of 62

Você também pode gostar