Escolar Documentos
Profissional Documentos
Cultura Documentos
(P.C.B.)
INTRODUCTION--
* Plastic Tray
The first and foremost in the process is to clean all dirt from copper
sheet with say spirit or trichloro ethylene to remove traces grease or
oil etc. and then wash the board under running tap water. Dry the
surface with forced warm air or just leave the board to dry naturally
for some time.
3. Try not to breathe the vapours. Stir the solution by giving see-
saw motion to the dish and solution in it.
The process of making a Printed Circuit for any application has the
following steps (opted professionally):