Escolar Documentos
Profissional Documentos
Cultura Documentos
1.0
Clearvision overview
000
001
Order codes Code Key features of the Arizona range
• Metal tile (SAS 330), T-grid and plasterboard ceilings
90° 90°
160
60°
45° 45°
240
Dimming
DSI -DSI 30° 15° 0° 15° 30°
DALI -DALI
Switchdim -SD
Options
3 hour emergency facility -EMI
296 296
596
1196
Arizona
The below figures are approximate, suitable as a rough guide for budget costing.
For specific project designs and calculations please contact our design department
enquiries@clearvisionlighting.com
2 x 28W
400 9 11 14 17 31 45
500 11 14 18 22 39 56
2 x 54W
400 5 7 9 10 19 27
500 6 9 11 13 23 33
002
003
Design
The Arizona, as with the majority of Clearvision Replacement costs are reduced due to the LED
products, is available with a 3 hour maintained emergency system using a smaller emergency battery
emergency facility, where one of the fluorescent lamps pack. To facilitate this, the design of the Arizona LED
also functions as the light source under emergency emergency reflector wing allows for it to be quickly
conditions. and easily removed saving labour costs.
The Arizona also offers an emergency LED option. As with our conventional emergency range, LED
A small 1.2W LED emitter installed neatly within the emergency is available in self test (to BS EN 62034 :
corner of the luminaire directs the light exactly where it 2006) and central test reporting versions.
is needed under emergency conditions.
Min Illuminance on centre line: 1.00 lx Min Illuminance on half of escape route width: 0.50 lx
The above figures are approximate, suitable as a rough guide for budget costing. For specific project designs
and calculations please contact our design department enquiries@clearvisionlighting.com
2 x 28W 1W
The Arizona is easy to maintain, because the lens hinges or clips out
on shootbolts providing easy access to the lamp or ballast, which is
accessible behind a removable cover plate.
006
007
Controls systems
K-Sense builds on the simple control offered by K-Space offers almost limitless possibilities for
Clearvision’s basic dimming system - the K-Dim control of the Arizona luminaire range and other
with the addition of a multi-sensor housed neatly lighting products within a single space or entire
within the Arizona luminaire itself. As well as building. Using the DALI (Digital Addressable
simplifying wiring and avoiding additional ceiling Lighting Interface) protocol, each Arizona is
cutouts, the in-built sensor introduces presence/ simply connected to a pair of dimming wires
absence detection and daylight regulation features leading back to a control/power supply unit.
to the Arizona range. Likewise input devices such as control panels,
sensors and actuators may also be hung off the
The movement and daylight sensor head is housed control lines at any point.
neatly within a specially designed reflector wing,
minimising any impact on the visual appearance or More advanced features are achieved by the addition
photometric performance of the product. of interface units. This allows the system to interact
with a range of external devices including AV (audio
Arizona master luminaires incorporating sensors can visual) systems, motorised blinds, mains dimmable
be configured to simply control the slave luminaires lighting and other switchable loads.
around them, or be interconnected to act as one
system. This modular approach provides a high level A single K-Space network has a cap to the number
of flexibility, making the K-Sense system ideal for of devices connected to it, which is usually around
many types of space. 64-128, dependant on the controller used and each
devices power requirements. Multiple K-Space
For movement detection, K-Sense can be configured networks can easily co-exist in isolation to each other,
to respond in either presence or absence mode but where a building wide solution is required i.e for
or be disabled totally. In presence mode wherever central monitoring purposes, the use of a router is
movement is detected the lighting is energised and required.
remains so until no movement has been detected for
15 minutes, at which point the lighting will gradually Located at the end of each DALI bus, individual
dim down to off. Likewise anyone entering an area routers are linked together using ethernet cables and
previously vacated for longer than 15 minutes will communicate with one another using TCP/IP which
trigger the lighting on. Absence mode has identical is the same protocol used for computer networks. As
behaviour to presence, with the difference that the well as being able to link a virtually limitless number
lighting, once off, must be reactivated by a switch. of networks, this TCP/IP ‘Backbone’ is ready for
This avoids the lights activating accidentally and is computer control and from there can be integrated into
of particular use in cellular offices where people can an existing BMS (Building Management System). All
enter momentarily. the system information is stored within the K-space
network meaning that once programmed by computer,
Daylight regulation maintains the light level within a it can be disconnected as it’s no longer required for
space around the current dimming level set via wall day-to-day operation.
switch or remote. Daylight regulation may also be
independently disabled if necessary.
2 Core
RF Wall Plate
6 Core 6 Core 6 Core (Optional)
Slave
Slave Master
Master Slave
Slave Sensor Slave
RF Remote
(RJ10) (Optional)
Master link cable Slave sensorline
(RJ10 Supplied) (RJ10)
Wall Switch
Ceiling Mounted
6 Core 6 Core 6 Core
Slave
Slave Slave
Slave Master
Master Slave
Slave Extension Sensor
Sensor
Sensor Range
Fig 2 Floor C
Router
DALI bus
Floor B
Ethernet Laptop
Router Switch
DALI bus TCP/IP Ethernet link
Floor A
Router
DALI bus
Link to BMS
008
009
Related Products
Chiara
Clearvision is an ergonomic
lighting company that designs and
manufactures energy efficient lighting.
Our products are developed with the
environment in mind whilst also leading
in performance and appearance.
A Clearvision Dialux Plug-in is available for Our design and technical teams are
on hand to support our customers
download from www.clearvisionlighting.com
throughout the lifetime of our products.