Escolar Documentos
Profissional Documentos
Cultura Documentos
This document assumes that name resolution to the clients is functioning, and the NIM
server has been set-up and created
[Entry Fields]
* Host Name of Machine [app-ora]
(Primary Network Install Interface)
1
F3 to go back on menu.
Manage Machines
Select Manage Network Install Resource Allocation Allocate resources select the
new client Select the following four resources
Manage Network Install Resource Allocation
2
After completion, F3 twice to the Manage Machine menu. Select perform operations on
machines Select the new client Select bos_inst
Perform a Network Install
[Entry Fields]
Target Name app-ora
Source for BOS Runtime Files mksysb +
installp Flags [-agX]
Fileset Names []
Remain NIM client after install? yes +
Initiate Boot Operation on Client? no +
Set Boot List if Boot not Initiated on Client? no +
Force Unattended Installation Enablement? no +
ACCEPT new license agreements? [yes] +
3
Select 2) Remote IPL Settings
4
Select IP Parameters
Enter the IP Information. If the network is flat, use the NIM server as a default gateway
5
Verify Adapter Settings
6
Under adapter in the virtual world, there is not much we can do. With a real adapter, set
the speed and duplex to match the network switch
7
Turn Spanning tree off in the other menu
8
Run the Ping test to ensure communications with the server
9
Go back to the Main Menu
Go to Option 5, boot options
10
Select option 1 Install Device
11
Select the virtual Ethernet adapter
Normal Boot
12
Yes, we are sure
13
1 and enter for English
IF you get the following error, run through the screens again. Sometimes virtual devices
need some help being recognized
14
Always check the setting, select #2
15
If all looks good, use “0” to continue
The system will then load AIX, it will be ready for addition customization
16