Escolar Documentos
Profissional Documentos
Cultura Documentos
Version: 6.4.1
ImageNow and CaptureNow are registered trademarks of Perceptive Software, Inc. All other products produced by Perceptive
Software, Inc., including WebNow, are Perceptive Software trademarks. All other brands and product names mentioned in this
document are trademarks or registered trademarks of their respective owners.
©
Copyright 2010 Perceptive Software, Inc. All rights reserved.
Perceptive Software ImageNow Installation and Setup Guide
Table of Contents
Installing ImageNow ................................................................................................................................... 1
Installation Process ................................................................................................................................... 1
Prepare for the installation ..................................................................................................................... 1
Verify the installation checklist ............................................................................................................... 2
Verify TCP/IP Connectivity for ImageNow Server ................................................................................. 2
Open firewall and network ports for communication .............................................................................. 3
About INEMUSER.................................................................................................................................. 3
Installing ImageNow Server on Windows using Microsoft SQL Server .................................................... 4
ImageNow Server installation process .................................................................................................. 4
Download the ImageNow Server files.................................................................................................... 5
Create the INOW6 database ................................................................................................................. 5
Verify the INOW6 database user authentication ................................................................................... 6
Install ImageNow Server ........................................................................................................................ 6
Remove the DEP setting........................................................................................................................ 7
Tune the Microsoft SQL Server for the ImageNow Server on Windows ............................................... 8
Increase performance for ImageNow .................................................................................................... 8
Installing ImageNow Client ........................................................................................................................ 9
Install ImageNow Client attended .......................................................................................................... 9
Install ImageNow Client unattended .................................................................................................... 11
ADDLOCAL value definitions ............................................................................................................... 15
Installing an ImageNow Server license ................................................................................................... 15
Generate a license hardware fingerprint.............................................................................................. 16
Install ImageNow product licenses ...................................................................................................... 16
Start all ImageNow services .................................................................................................................... 18
Appendix A: Server configuration tables ............................................................................................... 19
inow.ini ..................................................................................................................................................... 19
inserver.ini ............................................................................................................................................... 30
inserverAlarm.ini ...................................................................................................................................... 37
inserverBatch.ini ...................................................................................................................................... 39
inserverEM.ini .......................................................................................................................................... 42
inserverImp.ini ......................................................................................................................................... 43
inserverJob.ini ......................................................................................................................................... 54
inserverMonitor.ini ................................................................................................................................... 56
inserverMQ.ini ......................................................................................................................................... 67
inserverTask.ini ....................................................................................................................................... 69
ii
Perceptive Software ImageNow Installation and Setup Guide
inserverWorkflow.ini ................................................................................................................................ 73
Appendix B: Client configuration tables ................................................................................................ 75
ImageNow.ini ........................................................................................................................................... 75
Additional settings ................................................................................................................................ 75
Index ........................................................................................................................................................... 93
iii
Perceptive Software ImageNow Installation and Setup Guide
Installing ImageNow
Running ImageNow on your network requires that you install the ImageNow Server on a server computer
and install at least one ImageNow Client on a computer that can access the server computer. You install
the client on all computers on which a user performs ImageNow tasks, such as scanning and linking.
ImageNow can be set to use encrypted communication through TCP/IP to pass data between the server
and clients. Each user accesses ImageNow from the client using a login ID and password.
An initial installation of ImageNow Client and Server requires that you complete several tasks in order.
The following installation information assumes that you are performing an initial installation of ImageNow
instead of upgrading from an earlier version of ImageNow. If you are updating ImageNow components,
make sure you first refer to the Update ReadMe document available on the Customer Portal of the
Perceptive Software web site at www.imagenow.com. Sections of the update readme may reference
procedures in this installation guide.
ImageNow components are not backwards-compatible. For example, you must install version 6.4.1 of the
ImageNow Client to work with version 6.4.1 of the ImageNow Server. For product technical specifications
and system requirements, ask your Perceptive Software representative for a copy of the Product
Technical Specifications document.
Installation Process
The following steps outline the high-level procedures that you need to perform to install and configure
ImageNow and information you need to verify before the installation.
Page 1 of 93
Perceptive Software ImageNow Installation and Setup Guide
Note If you receive the message "Bad IP address" in response to the ping request, you are not
connected to the ImageNow Server. Check with your system administrator to verify the ImageNow Server
IP address or name.
Page 2 of 93
Perceptive Software ImageNow Installation and Setup Guide
About INEMUSER
In addition to the INUSER database user, the database setup scripts also set up a database user named
INEMUSER. If you have external applications that need to connect to the ImageNow database, you can
do so using this database user, The INEMUSER user can add, remove, and update data in
IN_EXTERN_MSG and IN_EXTERN_MSG_PROP tables in External Messaging Agent without risk of
corrupting information stored in the ImageNow database. External applications can access ImageNow
database only through INEMUSER.
Page 3 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 4 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 5 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 6 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 7 of 93
Perceptive Software ImageNow Installation and Setup Guide
Tune the Microsoft SQL Server for the ImageNow Server on Windows
After you install ImageNow and any additional ImageNow agents you want to use, like ImageNow
Content Server or ImageNow Fax Agent, you can optionally tune your SQL Server settings to make your
database run more efficiently. For some SQL Server installations, the default number of processes is not
set high enough to cover the number of users accessing the database through ImageNow. To assess the
number of default max worker threads set in SQL Server, do the following:
• Open the Microsoft SQL Server Query Analyzer and run the following statement:
sp_configure 'max worker threads';
This statement returns a config_value, which is a configurable number of processes that can
simultaneously access the database server. You can increase this number to cover the number of users
accessing the SQL Server through ImageNow using the following procedure:
1. In the SQL Server Enterprise Manager, in the left pane, open your SQL Server group.
2. In the right pane, right-click your server, and then select Properties.
3. In the SQL Server Properties dialog box, click the Processor tab.
4. Under Processor Control, in Maximum worker threads, type a new number for the threads that
can accommodate the number of simultaneous ImageNow users.
5. Click OK. Stop and restart the database server as needed.
If you add an agent or increase the num.workers setting in the inserver.ini file or any of the ImageNow
agent .ini files, you must re-evaluate the max worker threads setting in SQL Server.
Page 8 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 9 of 93
Perceptive Software ImageNow Installation and Setup Guide
5. In the Custom Setup page, select the components you want to install by selecting the corresponding
icons:
• ImageNow Client Files – Installs all files necessary to run ImageNow Client software.
• Demo Applications and Images – Installs demonstration software.
• User Help – Installs end-user help files.
• Administrator Help – Installs the ImageNow integration and administration help files.
• Support for viewing non-graphic data – Installs filters for viewing non-raster based objects
(such as .txt, .rtf, .pdf, .xls, or .doc).
• ImageNow Printer – Installs all files necessary to run the ImageNow Printer.
6. In the Default Connection Profile page do the following actions, and then click Next:
1. In the Profile Name box, enter a name for the default profile.
2. In the Server Name box, enter the name or IP address of the ImageNow Server.
3. In the Port box, enter the port number ImageNow Server uses.
7. In the ImageNow Shortcuts page, select the shortcuts you want to appear, and then click Next.
8. In the Ready to Install the Program page, click Install.
9. In the Installation Wizard Completed page, perform the following actions:
1. Select the Show the readme file checkbox.
2. If the Show the Windows Installers log check box appears, you can select the check box to view
the log file.
3. Click Finish.
Remove the DEP setting
You must remove the Data Execution Prevention (DEP) setting from the ImageNow executable if you
operate in a Windows Server 2003 or Windows Server 2008 environment.
1. On the desktop, right-click My Computer (Windows Server 2003) or Computer (Windows Server
2008), and then select Properties.
2. In Windows 2008, under Tasks choose Advanced system settings. Windows 2003 does not require
this selection.
3. In the System Properties dialog box, on the Advanced tab, under Performance, click Settings.
4. In the Performance Options dialog box, on the Data Execution Prevention tab, select Turn on
DEP for all programs and services except those I select.
5. Click Add.
6. In the Open dialog box, navigate to the \Program Files\ImageNow6\bin directory, select the
imagenow.exe file in that directory, and then click Open.
7. Click OK twice. Restart your computer to save the DEP setting.
Page 10 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 11 of 93
Perceptive Software ImageNow Installation and Setup Guide
Note Do not delete the Downloaded Installations\[Unique ID] folder or remove the MSI file. You
must have both for certain maintenance functionality.
Run the unattended installation
1. Set up your argument values to customize the unattended installation. If you do not manually set
argument values, then the default values are used during the installation.
Page 12 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 13 of 93
Perceptive Software ImageNow Installation and Setup Guide
2. Enter one of the following commands, depending on whether you need to use the EXE or the MSI file.
You can use one of the commands in a Command Prompt window, in the provided batch file
(SilentClientSetup.bat), or create a command line script for your deployment software:
• If you can use the EXE file, which is the preferred and more reliable method, enter:
ClientSetup.exe /V“<argument list>”
Page 14 of 93
Perceptive Software ImageNow Installation and Setup Guide
Value Description
SystemFiles
LeadTools
OneDirectory
Page 15 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 16 of 93
Perceptive Software ImageNow Installation and Setup Guide
5. The License Upload dialog box lets you view the type name, actual license code, and
current status of each license upload. To display detailed information for a specific license,
select the appropriate row.
• Upload a single license:
1. On the Start menu, point to All Programs, point to ImageNow 6, and then click ImageNow
6.
2. In the ImageNow login, click License Manager.
3. In the ImageNow License Manager dialog box, select Create a new license.
4. Click Browse to select a single *.lic file to upload, and then click Open.
Page 17 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 18 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 19 of 93
Perceptive Software ImageNow Installation and Setup Guide
Directory user.dir Any valid directory Specifies where the user temporary
Locations directories are located.
The default is
$(IMAGENOWDIR6)/user.
Page 20 of 93
Perceptive Software ImageNow Installation and Setup Guide
odbc.userid Any valid username Specifies the user ID for the ODBC
connection.
The default is inuser.
auth.odbc.userid Any valid username Specifies the user ID for the ODBC
connection.
The default is inuser.
Page 21 of 93
Perceptive Software ImageNow Installation and Setup Guide
ODBC auth.odbc.password Any valid password Specifies the password for the
ODBC connection, where each
(continued)
character is advanced +1, so the
password “imagenow” would be
“jnbhfopx”.
The default is jnbhfopx.
Page 22 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 23 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 24 of 93
Perceptive Software ImageNow Installation and Setup Guide
Logon Control LDAP<n>.login.attr Any valid attribute Specifies the LDAP user attribute
you want to search for in the LDAP
(continued)
server. The search looks for this
attribute whose value is the value
entered in the ImageNow login. For
example,
LDAP.login.attr=sAMAccountName.
Page 25 of 93
Perceptive Software ImageNow Installation and Setup Guide
Logon Control logon.minclientversion Any valid ImageNow Specifies the Image Now version
Client version number the Windows Client must
(continued)
number that uses meet or exceed to log onto the
the general format: ImageNow Server successfully.
<major>.<minor>.<r The default setting is 0.0.0.1 and
evision>.<build> may be changed to force upgrades
for revisions and builds within the
same release version.
Page 26 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 27 of 93
Perceptive Software ImageNow Installation and Setup Guide
Full Text collection.high.water. Any positive integer Specifies the maximum number of
mark records allowed per Content Server
(continued)
collection.
The default is 5000000.
Page 28 of 93
Perceptive Software ImageNow Installation and Setup Guide
Locale supported.locale EN, FR, DE, ES Specifies the languages that are
supported.
EN = English
FR = French
DE = German
ES = Spanish
The default is EN.
Page 29 of 93
Perceptive Software ImageNow Installation and Setup Guide
inserver.ini
The following table provides definitions and sample data for the settings in the inserver.ini configuration
file. This table displays the INI settings under group headings in brackets, for example, [General], in the
order the groups appear in the INI file. Each setting offers two or more options, which are defined in the
table below along with a description of each setting and its options. Use this table as a guide when
customizing the file.
Page 30 of 93
Perceptive Software ImageNow Installation and Setup Guide
General webnow.getpage Any valid URL page Specifies the home page for
location WebNow.
(continued)
The default is
index.jsp?action=filter&.
Page 31 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 32 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 33 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 34 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 35 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 36 of 93
Perceptive Software ImageNow Installation and Setup Guide
inserverAlarm.ini
The following table provides definitions and sample data for the settings in the inserverAlarm.ini
configuration file. This table displays the INI settings under group headings in brackets, for example,
[General], in the order the groups appear in the INI file. Each setting offers two or more options, which are
defined in the table below along with a description of each setting and its options. Use this table as a
guide when customizing the file.
Modem comm.port Any valid port Specifies the port Alarm Agents
uses to connect to the modem.
The default is COM1.
Email smtp.server Any valid IP address Specifies the SMTP server Alarm
or server name of Agent uses for e-mail alarms.
an SMTP server
The default is localhost.
Page 37 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 38 of 93
Perceptive Software ImageNow Installation and Setup Guide
inserverBatch.ini
The following table provides definitions and sample data for the settings in the inserverBatch.ini
configuration file. This table displays the INI settings under group headings in brackets, for example,
[General], in the order the groups appear in the INI file. Each setting offers two or more options, which are
defined in the table below along with a description of each setting and its options. Use this table as a
guide when customizing the file.
Page 39 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 40 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 41 of 93
Perceptive Software ImageNow Installation and Setup Guide
inserverEM.ini
The following table provides definitions and sample data for the settings in the inserverEM.ini
configuration file. This table displays the INI settings under group headings in brackets, for example,
[General], in the order the groups appear in the INI file. Each setting offers two or more options, which are
defined in the table below along with a description of each setting and its options. Use this table as a
guide when customizing the file.
Page 42 of 93
Perceptive Software ImageNow Installation and Setup Guide
inserverImp.ini
The following table provides definitions and sample data for the settings in the inserverImp.ini
configuration file. This table displays the INI settings under group headings in brackets, for example,
[General], in the order the groups appear in the INI file. Each setting offers two or more options, which are
defined in the table below along with a description of each setting and its options. Use this table as a
guide when customizing the file.
Page 43 of 93
Perceptive Software ImageNow Installation and Setup Guide
General import.directory.<n> Any valid directory Specifies the directory that Import
Agent monitors. You can define an
(continued)
unlimited number of directories by
creating new, subsequently named
import.directory.<n>. For example,
import.directory.receipts and
import.directory.invoices.
The default is
$(IMAGENOWDIR6)/import.
Page 44 of 93
Perceptive Software ImageNow Installation and Setup Guide
Mode index.file.ext Any valid file Specifies the file extension Import
INDEX_FILE extension Agent uses to identify the index file
when import.mode is set to
INDEX_FILE.
The default is INX.
Page 45 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 46 of 93
Perceptive Software ImageNow Installation and Setup Guide
Mode COMBO combined.inx.data. Any valid file Specifies the file extension Import
file.ext extension Agent uses to find the keys, which
are contained in the first line of the
file.
The default is CMX.
Mode KEY image.file.ext Any valid image file Specifies the file extension Import
MAPPING extension Agent uses as the image file.
The default is TIF.
Mode index.file.ext Any valid file Specifies the file extension Import
TIFF_TEXT_ extension Agent uses to identify the index file
COMBO when import.mode is set to
TIFF_TEXT_COMBO
The default is TXT.
image.file.ext Any valid image file Specifies the file extension Import
extension Agent uses as the image file.
The default is TIF.
Page 47 of 93
Perceptive Software ImageNow Installation and Setup Guide
Mode image.file.ext Any valid image file Specifies the file extension Import
FILENAME extension Agent uses as the image file.
The default is PDF.
Page 48 of 93
Perceptive Software ImageNow Installation and Setup Guide
Mode DATA_ extension.to.capture Any valid file Specifies the extension of the files
CAPTURE extension to import.
The default is TIF.
Page 49 of 93
Perceptive Software ImageNow Installation and Setup Guide
Mode DATA_ scan.user.name Any valid user name Specifies an identifier that is
CAPTURE required by DataCapture and that
optionally allows non-manager
(continued)
users to access DataCapture
results in the batch grid.
Key mapping doc.type Valid doc type Specifies the index key Import
Agent uses for the doc type.
DEFAULT
<text> = A valid doc type.
DEFAULT = The default doc type
identified in ImageNow.
The default is DEFAULT.
File Contention loop Any positive integer Specifies the number of times
Import Agent checks the file before
importing it to ensure the file is
complete.
The default is 10.
Page 50 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 51 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 52 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 53 of 93
Perceptive Software ImageNow Installation and Setup Guide
inserverJob.ini
The following table provides definitions and sample data for the settings in the inserverJob.ini
configuration file. This table displays the INI settings under group headings in brackets, for example,
[Timers], in the order the groups appear in the INI file. Each setting offers two or more options, which are
defined in the table below along with a description of each setting and its options. Use this table as a
guide when customizing the file.
Page 54 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 55 of 93
Perceptive Software ImageNow Installation and Setup Guide
inserverMonitor.ini
The following table provides definitions and sample data for the settings in the inserverMonitorAgent.ini
configuration file. This table displays the INI settings under group headings in brackets, for example,
[Polling], in the order the groups appear in the INI file. Each setting offers two or more options, which are
defined in the table below along with a description of each setting and its options. Use this table as a
guide when customizing the file.
Page 56 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 57 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 58 of 93
Perceptive Software ImageNow Installation and Setup Guide
Defaults defaults.program Any valid path and Specifies the full path of the
program program Monitor Agent runs in
(continued)
response to an event.
Page 59 of 93
Perceptive Software ImageNow Installation and Setup Guide
Email email.smtpserver Any valid IP address Specifies the SMTP server Monitor
or server name of an Agent uses for e-mail.
SMTP server.
The default is localhost.
Defines [defined_process] Any unique string Specifies the unique name for
each process Monitor Agent
monitors, for example:
AlarmAgent = inserverAlarm.exe
Page 60 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 61 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 62 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 63 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 64 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 65 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 66 of 93
Perceptive Software ImageNow Installation and Setup Guide
inserverMQ.ini
The following table provides definitions and sample data for the settings in the inserverMQ.ini
configuration file. This table displays the INI settings under group headings in brackets, for example,
[General], in the order the groups appear in the INI file. Each setting offers two or more options, which are
defined in the table below along with a description of each setting and its options. Use this table as a
guide when customizing the file.
Page 67 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 68 of 93
Perceptive Software ImageNow Installation and Setup Guide
inserverTask.ini
The following table provides definitions and sample data for the settings in the inserverTask.ini
configuration file. This table displays the INI settings under group headings in brackets, for example,
[General], in the order the groups appear in the INI file. Each setting offers two or more options, which are
defined in the table below along with a description of each setting and its options. Use this table as a
guide when customizing the file.
Page 69 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 70 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 71 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 72 of 93
Perceptive Software ImageNow Installation and Setup Guide
inserverWorkflow.ini
The following table provides definitions and sample data for the settings in the inserverWorkflow.ini
configuration file. This table displays the INI settings under group headings in brackets, for example,
[General], in the order the groups appear in the INI file. Each setting offers two or more options, which are
defined in the table below along with a description of each setting and its options. Use this table as a
guide when customizing the file.
Page 73 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 74 of 93
Perceptive Software ImageNow Installation and Setup Guide
Additional settings
The standard settings for the imagenow.ini file appear in the following section. In addition to the standard
settings, you can manually add the following settings to imagenow.ini as needed. We recommend that
you add these settings to both the default imagenow.ini file and any imagenow.ini files that have been
created in the user profiles. The default imagenow.ini file resides in [drive:]\Program
Files\ImageNow6\imagenow.ini. Each user who has logged in at least once has an imagenow.ini file in
their user profile, which is typically [drive:]\Documents and Settings\<username>\Application
Data\ImageNow\imagenow.ini.
Network Address Translation override: If you add these settings, you enable IP address override for
Network Address Translation (NAT) purposes. Use these settings to override the standard IP address
settings in the inow.ini file. To enable this function, under the [Message Queuing] section in the
imagenow.ini file, add the following two settings:
Set the enable setting to TRUE to specify that ImageNow Client uses the IP address in the
mq.agent.ip.address.override setting of this same configuration file. Set the enable setting to FALSE to
disable the setting. The default is FALSE.
Set the address setting to a valid and explicit IP address to specify the IP address to use when
mq.agent.ip.enable.override is set to TRUE. Leave the address setting empty if the enable setting is set
to FALSE. If mq.agent.ip.enable.override is set to TRUE and no override address is provided for this
setting, ImageNow Server generates an exception error. The default is empty.
Note If you are upgrading to ImageNow version 6.3 from a previous version, the former client-side
settings are replaced with these new settings, so you need to use the new settings instead. The
mq.agent.ip.enable.override setting replaces the mq.agent.client.ip.override setting. The
mq.agent.ip.address.override setting replaces the mq.agent.client.ip.address setting. The
mq.agent.client.ip.override and the mq.agent.client.ip.address settings were used in previous versions of
ImageNow in the imagenow.ini configuration files.
The following is an example of using the settings.
mq.agent.ip.enable.override=TRUE
mq.agent.ip.address.override=127.0.0.1
Page 75 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 76 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 77 of 93
Perceptive Software ImageNow Installation and Setup Guide
Viewer Settings ExportPath Any valid path Specifies the default path for
exported documents.
Page 78 of 93
Perceptive Software ImageNow Installation and Setup Guide
Viewer Settings ThumbHeight Any positive integer Specifies, in pixels, the height of
document thumbnails.
(continued)
WF Settings LastAddProcess Any valid workflow Specifies the process name that
process was used last when adding a
document to workflow.
The default is blank.
Page 79 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 80 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 81 of 93
Perceptive Software ImageNow Installation and Setup Guide
Learn Hyperlearn n If
Preferences CaptureDelay HyperlearnBringAppForward=TR
UE, this setting specifies the
delay in milliseconds between
bringing the host application
forward and capturing the
screen as a bitmap.
The default is 750, which is 3/4
of a second.
Page 82 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 83 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 84 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 85 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 86 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 87 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 88 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 89 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 90 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 91 of 93
Perceptive Software ImageNow Installation and Setup Guide
Page 92 of 93
Perceptive Software ImageNow Installation and Setup Guide
Index
Create the INOW6 database .............................. 5 inserverTask.ini ................................................ 69
Customer Portal ......................................... 1, 2, 8 inserverWorkflow.ini ......................................... 73
DEP ......................................................4, 6, 7, 10 Installing an ImageNow Server license............ 15
remove the setting .......................................... 7 Installing ImageNow .......................................... 1
ImageNow.ini ................................................... 75 checklist.......................................................... 2
Increase performance for ImageNow ................. 8 ImageNow Client ............................................ 9
ImageNow Client unattended ....................... 11
INEMUSER ........................................................ 3
ImageNow Server on Windows using
inow.ini ............................................................. 19 Microsoft SQL Server ................................. 4
inserver.ini ........................................................ 30 process ........................................................... 1
inserverAlarm.ini .............................................. 37 Microsoft Vista ................................................... 9
inserverBatch.ini ............................................... 39 services ............................................................ 18
inserverEM.ini .................................................. 42 SQL Server Management Studio ................... 5, 6
inserverImp.ini .................................................. 43 SunflowerSS.sql................................................. 5
inserverJob.ini .................................................. 54 TCP/IP Connectivity ........................................... 2
inserverMonitor.ini ............................................ 56 Tune Microsoft SQL Server ............................... 8
inserverMQ.ini .................................................. 67
Page 93 of 93