Escolar Documentos
Profissional Documentos
Cultura Documentos
Testing Services
© Schlumberger 2003
Schlumberger
225 Schlumberger Drive
Sugar Land, Texas 77478
All rights reserved. No part of this book may be reproduced,
stored in a retrieval system, or transcribed in any form or
by any means, electronic or mechanical, including photo-
copying and recording, without prior written permission
of the publisher.
SMP-7086-1
This book contains excerpts from the Schlumberger publication
Modern Reservoir Testing (SMP-7055). © Schlumberger 1994
iv
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Classified zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Zone 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Zone 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Zone 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Clean zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety standards for equipment layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
H2S service requirements and safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operation guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Equipment safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Heat radiation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Electrical safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Advanced Well Test Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
General standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Well test design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Equipment safety barriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Surface safety systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Emergency shutdown system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Surface safety valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Flowhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
21⁄8-in. lightweight flowhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
21⁄4-in. flowhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
31⁄8- and 31⁄16-in. flowheads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
61⁄8-in. flowhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Data Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Sand-Handling Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Dual-pot sand filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Sand separator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cyclonic desander . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Choke Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Heat Exchanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Heater types and applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Hydrate prevention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Viscosity reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Emulsion breakdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Steam-heat exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Indirect-fired heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Plate-steam exchanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Test Separator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Separator vessel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Type N test separator (48 in. × 12.5 ft, 1440 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Horizontal test separator (42 in. × 10 ft, 1440 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Type G test separator (42 in. × 15 ft, 720 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Vertical gas separator (2200 psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Oil and Gas Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Oil manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Gas manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Surge tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
vi
UNIGAGE CQG pressure gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Single-point measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Benefits and features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
UNIGAGE quartz pressure gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Benefits and features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
UNIGAGE H-Sapphire pressure gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Unique construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Test performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
UNIGAGE Sapphire pressure gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Monolithic recorder and sensor section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Test performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
UPP setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Memory guard feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Complete history log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Communication through battery feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Reporting and data transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Gauge calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
DataLatch System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
DST gauge adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
DGA with downhole LINC wireline adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
LINC downhole coupler assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
LINC running tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Downhole Shut-In Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Multislickline downhole shut-in tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Explosive-free shut-in tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
viii
Accessories and Project-Specific Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Saver and crossover sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Packoff sub and space-out sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Spacer sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Ported slick joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Fishing Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Post-shear retrieval tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Post-unlatch retrieval tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Commander* Control Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Commander hydraulic control system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Commander telemetry control and monitoring system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Emergency shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Design and philosophy requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Operational philosophy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Shutdown philosophy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Valve position indication philosophy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Subsea accumulator module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Subsea control module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Subsea spanner joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Subsea umbilical cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Subsea-controlled functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Surface control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
This first book in the Schlumberger Testing Services set introduces productivity and descriptive
well testing and summarizes test types and design principles. These techniques are the ground-
work for the other books on downhole testing services, safety systems and well testing services,
and data acquisition services. This book also includes marks lists and nomenclature for the set.
Well testing
Tests on oil and gas wells are performed at various stages of well construction, completion and
production. The test objectives at each stage range from simple identification of produced fluids
and determination of reservoir deliverability to the characterization of complex reservoir fea-
tures. Most well tests can be grouped as productivity testing or descriptive testing.
Productivity well tests are conducted to
■ identify produced fluids and determine their respective volume ratios
(a)
q4
q3
q2
Wellhead
flow rate
q1
(b)
p0
p1
Bottomhole
pressure
p2
p3
p4
Time
Figure 1. Relationship between flow rates (q) and drawdown pressures (p).
The plot of flow data versus drawdown pressure is known as the inflow performance relation-
ship (IPR). For monophasic oil conditions, the IPR is a straight line and its intersection with the
vertical axis yields the static reservoir pressure. The inverse of the slope represents the produc-
tivity index of the well. The IPR is governed by properties of the rock-fluid system and near-
wellbore conditions.
2
Examples of IPR curves for low (A) and high (B) productivity are shown in Fig. 2. The steeper
line corresponds to poor productivity, which could be caused either by poor formation flow prop-
erties (low mobility-thickness product) or by damage caused while drilling or completing the well
(high skin factor). For gas wells, IPR curves exhibit a certain curvature (C) caused by extra pres-
sure drops resulting from inertial and turbulent flow effects in the vicinity of the wellbore and
changes of gas properties with pressure. Oil wells that flow below the bubblepoint also display
similar curvature, but this is due to changes in relative permeability created by variations in satu-
ration distributions.
4200
3800
Sandface pressure
3400
(psia)
C
3000
A B
2600
0 20,000 40,000 60,000 80,000
Flow rate at surface conditions (B/D)
Typical pressure responses that might be observed with different formation characteristics are
shown in Fig. 3. Each plot consists of two curves presented as log-log graphs. The top curve rep-
resents the pressure changes associated with an abrupt production rate perturbation, and the
bottom curve (termed the derivative curve) indicates the rate of pressure change with respect to
time. Its sensitivity to transient features resulting from well and reservoir geometries (which are
too subtle to recognize in the pressure change response) makes the derivative curve the single
most effective interpretation tool. However, it is always viewed together with the pressure change
curve to quantify skin effects that are not recognized in the derivative response alone.
Homogeneous reservoir
Double-porosity reservoir
Pressure – pressure
derivative (psi)
Impermeable boundary
4
Pressure transient curve analysis probably provides more information about reservoir charac-
teristics than any other technique. Horizontal and vertical permeability, formation pressure, well
damage, fracture length, storativity ratio and interporosity flow coefficient are just a few of the
characteristics that can be determined. In addition, pressure transient curves can indicate the
reservoir’s areal extent and boundary geometry. Figure 4 shows the features of outer boundary
effects and the effects of damage removal.
The shape of the pressure transient curve, however, is also affected by the reservoir’s produc-
tion history. Each change in production rate generates a new pressure transient that passes into
the reservoir and merges with the previous pressure effects. The observed pressures at the well-
bore are a result of the superposition of all these pressure changes.
Different types of well tests can be achieved by altering production rates. Whereas a buildup
test is performed by closing a valve (shut-in) on a producing well, a drawdown test is performed
by putting a well into production. Other well tests, such as multirate, multiwell, isochronal and
injection well falloff, are also possible.
Mathematical models are used to simulate the reservoir’s response to production rate
changes. The observed and simulated reservoir responses are compared during well test inter-
pretation to verify the accuracy of the model. For example, by altering model parameters such
as permeability or the distance from the well to a fault, a good match can be reached between
the real and modeled data. The model parameters are then regarded as a good representation of
those of the actual reservoir.
Today’s computer-generated models provide much greater flexibility and improve the accuracy
of the match between real and simulated data. It is now possible to compare an almost unlimited
number of reservoir models with the observed data.
101
100
10–1
10–2
10–3 10–2 10–1 100 101 102
Figure 4. Outer boundary effects and effects of damage removal in pressure response curves.
6
Table 1. Summary of Different Test Types
Test Type Measurement Conditions Distinguishing Design
Characteristics Consideration
Flowing Shut-in Pulse Slug
Closed-chamber test † ‡ ‡ Downhole shut-in Chamber and cushion lengths;
valve open/shut sequence
Horizontal well test ‡ ‡ Testing hardware usually Minimize wellbore storage effects;
located in vertical part requires long-duration test
of hole
Multilayer transient test ‡ ‡ Multirate test; pressure Flow rate/pressure sensitivity; test
and rate measured at sequence; measurement depths
several depths
Vertical interference test † ‡ † Transient induced at one Test duration; pressure sensitivity
depth and measured at
another
† = Under certain conditions
‡ = Commonly conducted
■ running ultra-high-precision gauges when test objectives call for a detailed reservoir description
■ choosing reliable downhole recorders to ensure that the expected data will be retrieved when
pulling the tools out of hole
■ selecting surface equipment to safely handle expected rates and pressures
Whatever the test design, it is important to ensure that all data are acquired with the utmost
precision. To do this, it is necessary to have a good understanding of the available hardware
options and any prospective impact on data quality.
8
10,000
8000
Pressure (psia)
6000
4000
0 1 2 3 4
Elapsed time (hr)
106
Pressure
Derivative
105
104
Pressure – pressure Wellbore
derivative (psi) storage
Limits
103
Radial flow
102
Double-porosity behavior
101
10–4 10–2 100 102 104
Elapsed time (hr)
Marks of Schlumberger
Mark Spelled-Out Version or Description
Commander control systems for subsea well control
12
Nomenclature
ASTM American Society for Testing and Materials DAC digital-to-analog converter
BWPD barrels of water per day DWLA DST LINC wireline adapter
EZGC subsea pressure and temperature carrier HPHT high pressure, high temperature
ht reservoir thickness excluding gas cap LRTC LINC running tool cartridge
hwd penetration ratio (hw /rw) LSCI LINC surface computer interface
14
M mobility ratio pwf wellbore flowing pressure at a constant
flow rate
m (p) gas pseudopressure function
pwi initial wellbore pressure
max maximum
pws bottomhole shut-in pressure
MCCV multicycle circulating valve
p0 arbitrary reference pressure
MCS master control station
PC personal computer
MCVL multicycle circulating valve with lock
PCTV PCT valve
min minimum
PFSV pump-through flapper safety valve
MIRV multiple-opening, internally operated
reversing valve PIPK Positrieve packer
RETV retainer valve in SenTREE 3 system STAN surface testing acquisition network
SAM subsea accumulator module tDf dimensionless time for fractured well
SCTT subsea completion and test tree THRT tubing hanger running tool
16
yw distance from a boundary to the well
γ pressure gradient
Δ difference
Δp change in pressure
Δq change in rate
Δt elapsed time
μ viscosity
μg gas viscosity
μl liquid viscosity
μo oil viscosity
μw water viscosity
ρg gas density
ρl liquid density
τ superposition time
φ porosity
ω storativity ratio