Escolar Documentos
Profissional Documentos
Cultura Documentos
80
Rel. Intensity (%)
Light intensity (%)
60
60
40
40
with fused silica window
20
20
0 0
200 300 400 500 600 700 800 900 1000 1100 150 190 230 270 310
Wavelength (nm) Wavelength (nm)
The high frequency excited 102
Deuterium lamp 100
The high frequency excitation provides 98 37
9.5
90
3
A A
88
Lamp
Life 86 unit
157
141
1000 hours. As the lamp can be switched 80
0 2 4 6 8 10 12
on and off on demand or operated in
Cycles
cycles the lifetime can be extended con-
siderably. The number of ignitions affect 4 Control Power
Cyclic Operation measured at 230 nm, board supply
the operating life only insignificantly. measuring time: 15 sec; off = 75 sec. circuit
board
For example in nitrate measurements in
2
A A
waste water FiberLight is switched on Terminal strip X1
A = Mounting holes
every 30 seconds for just 1 second. The
measurement is started after a delay of
0.5 seconds. After this delay FiberLight
has a very good pulse-to-pulse-stability 4
Dimensional Outline of FiberLight.
of approx. 0.1 % in the UV spectral range.
Lamp Life Characteristic FiberLight DTM 6/10
– measured at 250 nm.
A
5
120
10.8
100
B
Relative Intensity (%)
80
11.2
60
C
40
D
20
E
0
0 200 400 600 800 1000 1200
Operating Time (h)
A = Fiber
B = Optical Lens
C = Aperture
FiberLight with Suprasil window,
D = Deuterium Lamp
spectral distribution measured under vacuum
E = Tungsten Lamp
with optical fibers of different lengths.
5 4
120 100 Cross section of the FiberLight lamp module
showing: the tungsten lamp, the rf excited
100 Deuterium lamp and the optical system which
Fiber 20 cm / 400 µm 80 projects the UV and visible light output into
80 the fiber.
Rel. Intensity (%)
60
± 20°
60 (FWHM)
40
40
Fiber 50 cm / 400 µm
20
20
0 0
150 190 230 270 310 -50 -30 -10 0 10 30 50
3 Spatial Intensity Distribution of the Deuterium
Wavelength (nm) Angle (deg)
lamp – measured without lens.
General Specifications UV-Vis Light Source FiberLight
Spectral Distribution 200 – 1100 nm, Options: 185 – 1100 nm, 160 – 1100 nm
Power Consumption Approx. 6 Watt (both lamps in operation)
Power Requirements 12 Vdc/0.6 Adc
Ambient Temperature 5 – 35 °C
Relative Humidity Max. 90 %, non-condensing
Dimensions (LxWxH) 157 x 55 x 37 mm
Shutter Lamp off/dark current measurement, TTL controlled
Functions Deuterium and tungsten lamp can be triggered separately by a TTL signal
Light exit SMA 905 connector for coupling to optical fibers
Optical Fiber Fiber diamater 200 µm, 400 µm, 600 µm
Numerical aperture Deuterium Lamp 0.245, Tungsten Lamp 0.057
Cooling Not required
Tungsten Lamp
Spectral Distribution 400 – 1100 nm
Voltage 5 Vdc
Current 45 mAdc
Life > 2000 h
Options
FiberLight Type DTM 6/10 DTM 6/50 DTM 6/10S DTM 6/50S
Part No. 45006280 45006281 80000755 80001017
Aperture size 1.0 mm 0.5 mm 1.0 mm 0.5 mm
Window material Fused silica Fused silica Synthetic silica Synthetic silica
Spectral distribution with optical fiber 200 – 1100 nm 200 – 1100 nm 185 – 1100 nm 185 – 1100 nm
Spectral distribution at operation under vacuum:
without opical fiber 185 – 1100 nm 185 – 1100 nm 160 – 1100 nm 160 – 1100 nm
Recommended Fiber Diameter 400 – 600 µm 200 – 600 µm 400 – 600 µm 200 – 600 µm
Replacement Lamp Module DTM 6/10 DTM 6/50 DTM 6/10S DTM 6/50S
Products as supplied may differ from the illustrations and descriptions in this brochure. HNG - B 154 E · D 2C 01.02/M+T
Printed in Germany