Escolar Documentos
Profissional Documentos
Cultura Documentos
QX
QXT
The QX high-pressure
internal gear pump
Fit it, then forget it
Applications
Advantages
– Hydraulic presses
– noise levels from 53 - 68 dB(A) – Plastics machinery
depending on pump model – Pressure die casting machines
– service life more than 20,000 hrs – Hydraulic power units
– volumetric efficiency up to 98% – Waste compactors
Functional features
– Machine tools
The straightforward and robust – Elevator drives
design ensures long life without – Lift trucks
the need for costly
maintenance. More than
1,000 types of Bucher Technical data
double and multiple
pumps are in Cont. pressure: max. 320 bar
service around Inter. pressure: max. 400 bar
the globe and Displacement: 5 – 500 cm3 /rev
their numerous Viscosity range: 10 – 300 mm 2 /s
advantages,
including
ultra-low noise
levels, guarantee
satisfied users.
The QXM drive unit can be used in – can be used in pump and motor
open- and closed-loop circuits. It modes
works as a pump to lift a load, and – speeds of more than 10,000 rpm Application areas
when the load is lowered it then can be achieved
works as a motor to recover energy. – mode changeover within – High-storage warehouses
In 4-quadrant mode, the drive unit milliseconds – Hydraulic elevators
controls the complete motion cycle – 1, 2 and 4 quadrant operation – Rope winch drives
of a cylinder. – direct control of differential and – Fork lift trucks
double-piston rod cylinders – Scissor lift tables
– energy recovery – Agitators
– Drives for ship unloading pumps
Technical data – Mould-close units for plastics
machines
Cont. pressure: 320 bar
Inter. pressure: 400 bar
Displacement: 5 – 250 cm 3 /rev
Max. speed: > 10,000
rpm
Min. speed: 100 rpm
Viscosity range: 10 – 300 mm 2 /s
The pump for variable speed drives
A competitive advantage from up to 25% energy savings
As a result of increased
environmental awareness and the
growing competitiveness of rival
drive technologies, the energy
consumption and noise levels of
plant and machinery have become
important criteria. By using variable
speed pumps, it is possible to create
energy-efficient hydraulic drives in
which, dependent on the machine
cycle, the energy savings can be as
much as 25% when compared to a
metering-controlled drive.
Accessories
Everything from one supplier
– Pressure relief valves Models to 420 bar with Various models available
– Electrically unloaded pressure SAE 3000 psi port
relief valves Models to 16 bar with Bell housings
– Electro-proportional pressure SAE 3000 psi port
relief valves Available for all QX pumps
– Unloading/accumulator
charging valves