Escolar Documentos
Profissional Documentos
Cultura Documentos
An OL (Over Range) indication means that the input is greater than the selected range.
Press higher Range buttons, one at a time, until you get desired readings.
To measure Frequency, press the V Button in, press the DC-AC Button in for AC. Press the Hz Button.
“The frequency function is fully autoranging over four ranges: 200 Hz, 2000 Hz, 20 k Hz, and 200 k Hz.
“Depending on the frequency of the ac input signal, the 8060A automatically selects the proper range
and displays the appropriate measurement unit, either Hz or kHz. “Frequencies less than 12.2 Hz are not
measured reliably, and frequencies greater than 199.99 kHz cause the OL Over Range indicator to
appear.” Pressing the Hz Button again will toggle the meter back to measuring AC Volts. (Instruction
Manual, Page 2-21).
1
“The REL (Relative) function allows you to store any reading as an offset or relative reference value.
“When you press the REL button, the REL indicator appears in the upper right corner of the display and
the 8060A stores the next measurement in a register a;pmg wotj the function and range. “Subsequent
measurements are displayed as the difference between the measured value and the stored relative
reference.” (Instruction Manual, Page 2-19).
“To select the Continuity Function →←, first select the resistance function and then press the →←
button under the display. “The →← button functions like a three position switch: the first button press
enables visible continuity (the →← indicator is displayed), the second button press enables audible
continuity (the →← and audible indicator are displayed), and the third button press cancels continuity
selection.” (Please see the Instruction Manual, Page 2-24. I couldn’t find or draw the audible symbol in
this explanation. It is the third button from the left in the picture below).
Footnote: All quotes are taken from the Fluke 8060A Digital Multimeter Instruction Manual, P/N
632661, March, 1982, Rev. 1, 11/82.
This manual is located in the Electronic Technician’s Filing Cabinet, Service Manuals drawer, in the
Fluke 8060A Folder. Folders are filed Alphanumerically.