Escolar Documentos
Profissional Documentos
Cultura Documentos
Specifications
FEATURES
Relays and Solenoids Can be Switched Directly. (maximum switching current:
200mA) click
• Wide range of models available. (4, 7, 12, 20mm, top/side, and N.O./N.C.)
• Different-frequency types that are only slightly influenced by mutual interfer-
ence available for all models.
• High seal capabilities. (IP67)
• Enhanced circuit protection. (surge absorption, load short-circuit, reverse
connection)
• Relays and solenoids can be switched directly. (maximum switching current:
200mA)
ORDER GUIDE
• Standard (pre-leaded) model (cord length 1m)
Actuation Appearance Sensing Sensing Output operation
Catalog listing
method Sensor package style Dimensions distance face mode
N.O. FL2-4A6H
NPN
N.C. FL2-4B6H
Top
N.O. FL2-4D6H
PNP
N.C. FL2-4E6H
12 12 45
N.O. FL2-4A6S
NPN
N.C. FL2-4B6S
Side
N.O. FL2-4D6S
PNP
N.C. FL2-4E6S
4mm
N.O. FL2-4A6QH
NPN
N.C. FL2-4B6QH
Top
N.O. FL2-4D6QH
PNP
N.C. FL2-4E6QH
15 15 32
N.O. FL2-4A6QS
NPN
N.C. FL2-4B6QS
Side
N.O. FL2-4D6QS
PNP
High-frequency N.C. FL2-4E6QS
oscillating type
(unshielded) N.O. FL2-7A6H
NPN
N.C. FL2-7B6H
Top
N.O. FL2-7D6H
PNP
N.C. FL2-7E6H
20 20 38 7mm
N.O. FL2-7A6S
NPN
N.C. FL2-7B6S
Side
N.O. FL2-7D6S
PNP
N.C. FL2-7E6S
N.O. FL2-12A6H
Top NPN
N.C. FL2-12B6H
30 30 52.2 12mm
N.O. FL2-12A6S
Side NPN
N.C. FL2-12B6S
N.O. FL2-20A6H
Top NPN
N.C. FL2-20B6H
40 40 53 20mm
N.O. FL2-20A6S
Side NPN
N.C. FL2-20B6S
1
No. CP-PC-2086E
SPECIFICATIONS
Catalog listing FL2-4 6
FL2-7 6 FL2-12 6 FL2-20 6
Item FL2-4 6Q
2
SENSING AREA DIAGRAM (typical examples)
FL2-4 /FL2-7 FL2-12 /FL2-20
FL2-12 FL2-20
3
EXTERNAL DIMENSIONS
• Standard (pre-leaded) model (unit: mm)
FL2-4 6H FL2-4 6S
Note; A mounting bracket and two mounting screws and provided. Note; A mounting bracket and two mounting screws and provided.
Vinyl-insulated cord (oil-resistant: 0.3mm2 , 27/0.12, 3-core) Vinyl-insulated cord (oil-resistant: 0.3mm2 , 27/0.12, 3-core)
4.2mm dia. 4.2mm dia.
The case color of different-frequency types ‘‘-F’’ is green. The case color of different-frequency types ‘‘-F’’ is green.
Note; Vinyl-insulated cord (oil-resistant: 0.3mm2, 27/0.12, 3-core) Note; Vinyl-insulated cord (oil-resistant: 0.3mm2, 27/0.12, 3-core)
4.2mm dia. 4.2mm dia.
The case color of different-frequency types ‘‘-F’’ is green. The case color of different-frequency types ‘‘-F’’ is green.
FL2-7 6H FL2-7 6S
Note; Vinyl-insulated cord (oil-resistant: 0.3mm2, 27/0.12, 3-core) Note; Vinyl-insulated cord (oil-resistant: 0.3mm2, 27/0.12, 3-core)
4.2mm dia. 4.2mm dia.
The case color of different-frequency types ‘‘-F’’ is green. The case color of different-frequency types ‘‘-F’’ is green.
4
(unit: mm)
FL2-12 6H FL2-12 6S
Note; Vinyl-insulated cord (oil-resistant: 0.3mm2, 27/0.12, 3-core) Note; Vinyl-insulated cord (oil-resistant: 0.3mm2, 27/0.12, 3-core)
5.7mm dia. 5.7mm dia.
The case color of different-frequency types ‘‘-F’’ is green. The case color of different-frequency types ‘‘-F’’ is green.
FL2-20 6H FL2-20 6S
Note; Vinyl-insulated cord (oil-resistant: 0.5mm2, 20/0.18, 3-core) Note; Vinyl-insulated cord (oil-resistant: 0.5mm2, 20/0.18, 3-core)
5.7mm dia. 5.7mm dia.
The case color of different-frequency types ‘‘-F’’ is green. The case color of different-frequency types ‘‘-F’’ is green.
5
CIRCUIT AND WIRING DIAGRAMS
• Standard (pre-leaded) model
• DC NPN type • DC PNP type
PRECAUTIONS
• Mounting • Mutual interference prevention
Tighten the screws to the torque shown below. When mounting proximity sensors in parallel or facing each
other, mutual interference may cause the sensor to malfunction.
Allowable tightening Recommended screw
Catalog listing Maintain at least the spaces indicated in the figures above.
torque (N-m) diameter
When standard frequency types and different-frequency types
FL2-4 6 0.5 Screw provided
‘‘-F’’ are used alternately in a row, maintain at least the spaces
FL2-4 6Q 0.5 M3 indicated in parentheses ‘‘( )’’ for dimensions A and B in the
FL2-7 0.5 M4 table below.
FL2-12 0.5 M4
Side sensing type Front sensing type
FL2-20 0.5 M5
6
RESTRICIONS ON USE
This product has been designed, developed and manufactured for general-purpose application in machinery and equipment.
Accordingly, when used in applications outlined below, special care should be taken to implement a fail-safe and/or redundant
design concept as well as a periodic maintenance program.
- Safety devices for plant worker protection
- Start/stop control devices for transportation and material handling machines
- Aeronautical/aerospace machines
- Control devices for nuclear reactors
Never use this product in applications where human safety may be put at risk.
(01)
Printed in Japan (SP)
1st Edition: lssued in Apr., 2002
7
2nd Edition: Issued in Oct., 2003