Escolar Documentos
Profissional Documentos
Cultura Documentos
1
Sorry about the creepy doll head.
10. Pull the end of the thread you just sewed and begin
to gather ruffle. (If you are not lazy, you can trim off all
those ugly threads, or even trim with pinking shears)
7. Fold ribbon strip in half the long way and iron. Sew 11. Wrap the ruffle around the top of your hat as shown
up the 2 short ends with 1/4" seam. below. You want the ruffle to end 3/4" above bottom of
hat (more then what's shown here, obviously) Adjust
the tightness of your ruffle for the correct length.
12. Pin the ruffle in place as shown. Pin from the back
through all layers.
2
15. Reverse hat.and set aside. 19. Work your way around the hat pinning all layers
until you reach the edge of your hood as shown below.
16. Fold neck tie in half the long way and iron.
17. Open, fold both long edges over 1/4" and iron
edges.
18. Find the center of the strap and pin to the center of
the back of the hoods, encasing both layers of the hood
with both layers of the strap. Covering the bottom 1/2"
of the hood edge. Note: I pin horizontally like this
22. Slide the elastic into the opening of the strap.
because I am left-handed but it is fine to pin vertically as
well.
3
25. Open both ends of strap and fold over 1/4". Iron.
23. Push the elastic in until the edges are aligned with
the back seams of the hood. Push the elastic to the
bottom of the pocket and pin in place as show. There 26. Fold in corners as shown here. Iron. Fold back in half
will be a gather. along crease and re-iron.