Escolar Documentos
Profissional Documentos
Cultura Documentos
COMMITMENT
RELIABILITY
INNOVATION
foundry. Eventually the founder's dream was coming true as the small
production unit he started kept growing rapidly. Now, after more than
C . R . I . I S O N E A M O N G
the few pioneers in the world to produce 100% stainless steel
THE INFRASTRUCTURE
of C.R.I. is pretty comprehensive with state-of-the-art machineries
and a high potential R&D wing, all within its own covered area of
with ISO 9001 & 14001 certifications. The R&D team always stays
N E E D L E S S T O S A Y ,
behind this legendary growth lies the untiring, innovative,
3" SILVER LINE SERIES 4" SILVER LINE SERIES 4" STAINLESS STEEL SERIES
Can be fitted only with C.R.I. Water filled Mounting dimensions are in accordance Mounting dimensions are in accordance
rewindable submersible motors. with NEMA STANDARDS with NEMA STANDARDS
Pumping trust. Worldwide.
6" STAINLESS STEEL SERIES 8"&10" STAINLESS STEEL SERIES 6"&8" EVERGREEN SERIES
8"
3
Flow m /h 78 95 125
Flow m3/h 14 18 22 30 48 60 Flow
28 45 50 60 68 80 90 100 125 140
Head
Head
Maximum m 574 540 570 459 363 285 Maximum m 420 460 280 Head
Maximum 220 258 252 218 370 320 325 280 240 125
m
Nominal Nominal
Nominal
inch
outlet size inches 2 2½ 2½ 3 3/4 3/4 outlet size inches 4/5 5 6 outlet size 3 3 4 4 4 4 4 5/6 5/6 5/6
Mounting dimensions are in accordance Mounting dimensions are in accordance Mounting dimensions are in accordance
with NEMA STANDARDS with NEMA STANDARDS with NEMA STANDARDS
COMMITMENT RELIABILITY INNOVATION
Mounting dimensions are in accordance Mounting dimensions are in accordance Mounting dimensions are in accordance
with NEMA STANDARDS with NEMA STANDARDS with NEMA STANDARDS
Pumping trust. Worldwide.
l Good suction lift and operating pressure l Dynamically balanced rotating parts
l Inbuilt thermal overload protector in all single tank, stock farm l Drainage of waste water and
l Balanced and rigid construction
phase pumps inclusion containing fibrous admixtures from
l Dynamically balanced rotating parts
l Available M.O.C. Type S Specifications leather factory and dyeing factory.
l Balanced and rigid construction
Specifications Power range (kW) : 0.25kW -0.18kW Drainage Pumps
l Available M.O.C. Type S, N & C.
Power range : 0.4 kW to 3.5 kW Single & Three phase
Specifications l Aquaculture water supply and drainage.
Speed : 2900 rpm. Speed : 2900 rpm
Power range : 0.37 kW - 45 kW l Water supply for agriculture irrigation,
Version : Single Phase, 200-240V, Versions : A.C. Single phase
Speed : 2900 rpm underground water pumping.
50Hz, A.C. Supply, 220 V - 50 Hz
Permanently connected AC incorporation with l Landscape and horticulture irrigation.
Versions : Single Phase - Capacitor thermal overload
230V, 50Hz, l Pumping of water from river and lakes.
(Permanent Split protector
A.C. supply, Permanently Capacitor PSC) A.C. Three phase - Features
connected Capacitor incorporated with Thermal 380V - 50 Hz.
l International standard design: VCT cable, auto-
(Permanent Split Overload Protector Type of duty : S1 (Continuous) cut, silicon carbide mechanical seal, high grade
Capacitor PSC) Three Phase 415V,
incorporated with Thermal Degree of protection : IP 55 cast iron, good quality and performance.
50Hz, A.C. Supply.
Overload Protector. Class of insulation : 'B' / 'F' l Multiple impeller design, there are three kinds
Type of duty : S1 (Continuous)
Three Phase 415V, Suction lift up to : 7m of impeller to handle different sewage and
50Hz, A.C. Supply. Degree of Rotation : Clock wise viewed from
Nominal suction & waste water
driving end
Type of duty : S1 (Continuous) delivery size (inches): 1 x 1, 1¼ x 1¼ (BSP) l Full range from low head to high head, compact
Degree of protection : IP 54
Degree of protection : IP 55 (Optinal IP44, IP54) and easy installation, equipped with rail system
Class of insulation : ‘B’ / 'F'
available.
Class of insulation : ‘B’ / ‘F’ Flow range upto : 2.5 lps / 9m3/hr
Specifications
Flow range upto : 30.5 lps / 110m3 / hr Head range upto : 55m
Suction lift upto : 7m Power Range : 0.55kW - 22kW - Sewage
Head range upto : 300m 0.35kW - 75kW - Drainage
Nominal suction x
Suction lift upto : 7m delivery size : 1 x 1, 1¼ x 1 Speed : 2900 rpm
Flange size : Upto 100mm in inches
Versions : A.C. Single phase - 230V-
O
O Max. Liquid Temp. : 90 C 50Hz 3 Phase 415V - 50Hz
Max. Liquid temp. : 120 C
O
Max. Ambient Temp. : 40OC Direct on line
Max. Ambient Temp. : 40 C (0.55 kW - 9.3 kW)
Type of Duty : S1 (Continuous)
Flow m3/h 2.5 5 8 12 Degree of : IP 68
Flow Protection
2 4 16 32 42 65 90 Head
O
Head Maximum m 53 53 53 51 Flow m3/h 1.2 2.4 3.6 4.8 6.8 Max.Liquid : 40 C
Maximum 220 219 225 265 295 220 200 Temperature
m
Nominal Head m 70 69 66 62 51
Nominal
inch
outlet size
1¼x1¼ 1½x1½ 2x2 2½x2½ 3x3 4x4 4x4 outlet size inches 1x1 1x1 1½x1½ 1½x1½ Maximum
COMMITMENT RELIABILITY INNOVATION
Maximum ambient
Temperature : 40O C
NOVA & VISTA - SERIES CC - SERIES CONTROL BOXES ELECTRONIC PRESSURE CONTROLS
ACCESSORIES
eliminates secondary leakage. not get corroded, rusted or deteriorate l Never allows your over head tank to spill over
even upto 25years of use. Special rubber l Good withstanding capacity to high voltage
Self lubricated Plain bearings for both drive or be empty
l
seals are provided with the thread to ensure and current
and non-drive end shaft ensure minimum l Eliminates water, power & time wastage
100% leak proof at high pump pressure. Substantial reduction in power consumption
bearing friction torque. l l Protects pump from low/high voltage and dry
l Internal surface of these pipes are very run
l Choice of seat and disc material to suit media l Prolongs the life of electrical installations
smooth, resulting in very low head loss due to l Absence of rigid or fixed part inside the tanks
conditions and service requirement.
friction & water discharge is increased upto l Can withstand any sudden surge current and makes cleaning easy
l Adaptability to fit between companion flanges the maximum of 30%, when compared with voltage
for all popular flange standards for the wafer traditional G.I. pipes
style body. l Protects from electrical shocks and any Specifications
l These pipes come in 3m Standard length and electrical hazards
l Seat liner extending on to the flange contact are light weight ensuring easy handling during Maximum Current : 10 (4) Amps / 16(4) Amps
faces, eliminates the need for separate flange pump installation & removing process. l Both flat and round cables are available Voltage Range : 125 - 250V, AC
gaskets during installation.
l Because of its light weight characteristic & Frequency : 50 / 60Hz
l Excellent adaptability for actuated operation special square thread design these pipes can
through standardized top flange mounting Specifications
be tightened easily using bare hands itself, Maximum Working : 550C
dimensions for actuator fitment. evicting the use of pipe wrench. Available Temperature
Specifications l uPVC column pipes are resistant to chemical sizes in sq.mm : 1.5, 2.5, 4, 6, 10, 16, 25, Degree of Protection : IP 68
reactions when used in acidic or alkaline 35 & 50
Type of valve : Centric Disc Butterfly Maximum : 10 meters
valve with Rubber lined waters assuring long life inside the borewell. Voltage Rating : 1100 V Immersion Depth
Body O O
Specifications Temperature Range : -10 C to +70 C Cable : Rubber Insulated 3 Core
Body type : Single Piece, Short wafer
or wafer lugged Nominal Diameter : 1, 1¼, 1½, 2, 2½, 3, 4 Conductor : High conductivity round cable
in inches annealed and bunched copper Cable Size : 1.0 & 1.5m
2
Seal type : Integrally bonded,
Replaceable Class of material : Standard & Heavy Insulated material : Flexible water proof PVC Cable length : 1.5m & 2.0m
Size Range : DN50 to DN 600 Sheath material : Flexible water proof
Weight Carrying : Standard 700f / Operation in : From 0.9 to 1.3
Pressure Rating : PN10/PN16 213mCapacity Heavy 1200f / 365m PVC/Rubber specific gravities
Operating Sheath colour : Black
O O
Temperature Range : -30 C to 180 C Float Dimensions : (L):135mm (B):51mm,
(Depending on MOC) Core Colour - 3 core : Red, Yellow and Blue (H):43mm
4 core : Red, Yellow, Blue & Green
Seat leakage
performance : Tight Shut off
Operation : Hand lever operation
Worm Gear operation
Electrical/Pneumatic
actuator operation-
optional
Pumps
Pumps that come with high efficiency.
that
Pumps that ensure low power consumption.
bear
Pumps that are symbols of perfection.
the
Pumps that can serve you for a lifetime.
C.R.I.
Pumps that bear the C.R.I. seal.
seal.