Draw ~ Polygon Enter nurnber of sides <3>: 4 (número de lados) Specify center ofpolygon or [Edge]: e (pelo lado) Specify fust endpoint of edge: 0,0 (centro) Specify second endpoint of edge: 30 (distância)
Figura 3.41
Determinar o centro do arco:
Draw ~ Are ~ 3 Point Command: _arc Specify start point of arc or [Center]: (Pl) A
Specify second point of are or [CenterlEnd]: (P2)
Specify end point of are: (P3) Dimension ~ Center Mark Select are or circJe: (Selecione o Círculo ou Arco)
Figura 3.42
Concordância entre retas paralelas:
Construir 1ª Linha Draw ~ Line Command: _line Specify fust point: 0,0 Specify next point or [Undo]: @lOO,O Specify next point or [Undo]: <Enter> Modify ~ Offset Specify offset distance or [Through/Erase/Layer] <Through>: digitar distância desejada Figura 3.43 Select object to offset or [ExitlUndo] <Exit>: (Selecionar objeto a ser copiado) Specify point on side to offset or [ExitIMultiple/Undo] <Exit>: (Clicar em direção ao ponto) Select object to offset or [Exit/Undo] <Exit>: Enter ou Esc para sair do comando. Draw ~ Circle ~ 2P Command: _circle Specify center point for circle or [3P/2PlTtr (tan tan radius)]: _2p Specify first end point of circle's diameter: (p I) Specify second end point of circle's diameter: (P2) Modify ~ Trim Select cutting edges ... Select objects or <select ali>: <enter> Clicar no arco excedente.