Você está na página 1de 6

CCNA

200-301
Part VI OSPF

Parte 1 OSPF Network Types

OSPF Network Types and


Chapter 21 Parte 2 OSPF Neighbor Relationships
Neighbors

Parte 3 Correção da Lista


OSPF Neighbor Requirements
Necessário Se estiver incorreto
Requerimento
para o OSPF formara adjacência?
Interface deve estar UP/UP Sim Não

ACL não pode bloquear tráfego OSPF Sim Não

Interfaces devem estar na mesma subrede Sim Não

Se houver autenticação no OSPF ela deve estar correta Sim Não

Hello e hold/dead timer devem ser os mesmos Sim Não


a0
Router ID deve 2ser
4
único em toda a rede
10.1.23.2/24
Sim Não
.1 2.2/ R2
10.1
1/ 0 G0/0
G0/
Devem estar na mesma área Sim Não
.1/ 24
. 1 2
24 10.1
G 0 / 0/ 0 O processo OSPF não pode estar em shut Sim Não
.1 10.1.13.1/24 10.1.23.3/24
R1 G0/1/0 G0/0/0 R3
.2 Interfaces devem utilizar oG0/0
10.1.13.3/24
mesmo MTU Sim Sim
G0/
2/0
24 10.1
.14.
1/2
4 Devem estar no mesmo OSPF Network Type (ex: Broadcast) Sim Sim
G0/
0/0 10.1.4.4/24
10.1 Apesar de formar adjacência os LSAs não
.14.
4/2 R4
4 serão trocados (ou seja não funciona)
G0/1
Finding OSPF Hello and Dead Timer Mismatches

R1# show ip ospf interface G0/0


GigabitEthernet0/0 is up, line protocol is up
Internet Address 10.1.1.1/24, Area 0, Attached via Network Statement
Process ID 1, Router ID 1.1.1.1, Network Type BROADCAST, Cost: 1
Topology-MTID Cost Disabled Shutdown Topology Name
0 1 no no Base
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 1.1.1.1, Interface address 10.1.1.1
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5

R2# show ip ospf interface G0/0


GigabitEthernet0/0 is up, line protocol is up
Internet Address 10.1.1.2/24, Area 0, Attached via Network Statement
Process ID 1, Router ID 2.2.2.2, Network Type BROADCAST, Cost: 1
Topology-MTID Cost Disabled Shutdown Topology Name
0 1 no no Base
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 1.1.1.1, Interface address 10.1.1.1
No backup designated router on this network
Timer intervals configured, Hello 5, Dead 20, Wait 40, Retransmit 5
Shutting Down the OSPF Process
R5(config)# router ospf 1
R5(config-router)# shutdown
R5(config-router)# ^Z
*Mar 23 12:43:30.634: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on GigabitEthernet0/1
from FULL to DOWN, Neighbor Down: Interface down or detached
*Mar 23 12:43:30.635: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on GigabitEthernet0/2
from FULL to DOWN, Neighbor Down: Interface down or detached

R5# show ip ospf interface brief


Interface PID Area IP Address/Mask Cost State Nbrs F/C
Gi0/1 1 0 10.1.12.1/24 1 DOWN 0/0
Gi0/2 1 0 10.1.13.1/24 1 DOWN 0/0

Quando coloca o OSPF process em Shut Down o IOS faz o seguinte:

• Derruba todos os vizinhos e limpa a tabela de vizinhos;

• Limpa a LSDB;

• Limpa da tabela de roteamento qualquer rota aprendida via OSPF;

E ao mesmo tempo o IOS mantém:

• Toda a configuração do OSPF

• A lista das interfaces com o OSPF habilitado mas em estado DOWN;


Issues That Allow Adjacencies but Prevent IP Routes
*Apr 10 16:31:01.951: %OSPF-4-NET_TYPE_MISMATCH: Received Hello from 2.2.2.2 on
GigabitEthernet0/0/0 indicating a potential network type mismatch

R2# show ip ospf neighbor


Neighbor ID Pri State Dead Time Address Interface
1.1.1.1 1 FULL/BDR 00:00:30 10.1.12.1 GigabitEthernet0/1/0

R1# show ip ospf neighbor


Neighbor ID Pri State Dead Time Address Interface
2.2.2.2 1 FULL/- 00:00:30 10.1.12.2 GigabitEthernet0/0/0

Area 0
10.1.23.2/24
.2/ 24
0.1 . 1 2 R2
1
1/ 0 G0/0
G0/

2. 1/24
.1
10.1.1.1/24 10.1
0/0
G0/
G0/0.1 10.1.13.1/24 10.1.23.3/24
R1 G0/1/0 G0/0/0 R3
G0/0.2 10.1.13.3/24 G0/0
G0/
2/0
10.1.2.1/24 10.1
.14.
1/2
4
G0/
0/0 10.1.4.4/24
10.1
.14.
4/2 R4
4
G0/1
Obrigado!

Você também pode gostar