Escolar Documentos
Profissional Documentos
Cultura Documentos
EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
SCHEDULED INSPECTION DATE & TIME ACTUAL INSPECTION DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
All damaged coating due to fabrication or handling shall be repaired with 09-SAMSS-106
A2
patching material. (ASTM A775, Sec. 11.2) Sec. III.B
Patching material compatible with the coating shall be supplied along 09-SAMSS-106
A4
with the coated reinforcing steel. (ASTM A775, Sec. 5.4) Sec. III.B
All systems for handling coated steel reinforcing bars shall have padded
contact areas. All bundling bands shall be padded or suitable banding
shall be used to prevent damage to the coating. All bundles of coated 09-SAMSS-106
A6
steel shall be lifted with a strong back, spreader bar, multiple supports, or Sec. III.B
a platform bridge to prevent bar to bar abraison. The bars or bundles
shall not be dropped or dragged. (ASTM A775, Sec. 15.1)
Page 1 of 2
SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff - August 2004)
SAIC NUMBER DATE APPROVED QR NUMBER
SAUDI ARAMCO INSPECTION CHECKLIST
FBE Rebar & Embedments Receiving Inspection SAIC-Q-1007 18-May-05 Civil
PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR
ITEM
ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-INSP DATE
No.
REMARKS:
REFERENCE DOCUMENTS:
1- 09-SAMSS-106 -- Epoxy Coating of Steel Reinforcing Bars, 31 December 2000
2- 09-SAMSS-075 -- Caulking Compound (Joint Sealant), 30 September 2003
3- ASTM A775 -- Standard Specification for Epoxy Coated Steel Reinforcing Bars, 1 April 2004
Page 2 of 2