Escolar Documentos
Profissional Documentos
Cultura Documentos
N
I
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers,
Electrical tape, Wire cutters, Safety glasses & (2) 60W A19 medium base bulbs.
● Helpful Tools (not included): Wire strippers.
1 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : KD242MM
STEP 1 :
Ceiling
a . Attach one end of the Fixture Chain onto the Fixture Loop. Canopy
Then attach the other end of the Fixture Chain onto the
Ceiling Loop. Ceiling Loop
Fixture Chain
Fixture Loop
Fixture
Assembly
STEP 2 :
a . Secure the Crossbar onto the Outlet Box with Outlet Box
Screws . Tighten until snug . Outlet Box
Crossbar
Outlet Box
Screw
STEP 3:
* Pliers is required on this step .
a . Thread Hex Nut onto top end of the Nipple .
b . Place Lock Washer over the top end of the Nipple and
then thread the Nipple into the center lock hole of the
Lock Washer
Crossbar .
c . Us ing pliers , thread the Hex Nut against the c rossbar Crossbar Hex Nut
and hand tighten until snug .
Nipple
2 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : KD242MM
STEP 4 :
* Use Wire Connectors ( not supplied ) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires .
a . Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b . Connect the House White ( or Ribbed ) Wire to the
BLACK ( OR RED ) WIRE BLACK OR SMOOTH
Fixture Supply Wire ( White or Ribbed Side ) .
c . Connect the House Black ( or Red ) Wire to the Fixture FROM HOUSE FROM FIXTURE
Supply Wire ( Black or Smooth Side ).
d . Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet GROUND WIRE GROUND WIRE
Box . FROM HOUSE FROM FIXTURE
STEP 5 :
a. Screw the Hex Nut onto the end of the Nipple and adjust to
proper location for Lock Washer, Ceiling Canopy and
Knob.
b. Pass the Lock Washer and the Ceiling Canopy over the
end of the Nipple and secure with the Knob. Hand-tighten Nipple
until snug.
Hex Nut
Lock Washer
Ceiling
Canopy
Knob
STEP 6 :
a. Place the Shade over the Socket and secure with the
Socket Collar. Hand-tighten until snug.
Shade
STEP 7:
a . Install the correct bulbs referring to fixture markings and/or labels for maximum wattage.
3 OF 4
INSTALLATION INSTRUCTIONS STYLE NUMBER : KD242MM
STEP 8:
a . Place the Diffuser over the Bolt in the bottom center of the
Shade. Secure by threading the Finial onto the Bolt. Hand-
tighten gently until snug.
Shade
Diffuser
Bolt
Finial
STEP 9:
a . Attach 78mm Crystal Pendants onto the hangers on the
Support Arms and bottom center of the fixture.
Support Arm 78mm Crystal
Pendant
78mm Crystal
Pendant
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
4 OF 4