Escolar Documentos
Profissional Documentos
Cultura Documentos
Objetivos
Mostrar el comportamiento y propiedades de elementos de concreto reforzado.
Contenido temático
8.- Torsión.
Bibliografía
Textos recomendados
1.- Park, R., Paulay, T.: Estructuras de Concreto Reforzado, Editorial Limusa, 1991.
2.- Wang, C. y Salmon, Ch.: Reinforced Concrete Design; Harper and Row, Tercera Edición,
New York, 1985
3.- Paulay, T., Priestley, M.J.N.; Seismic Design or Reinforced Concrete and Masonry Buldings.
John Wiley & Sons, Inc. 1992.
REFERENCIAS
Capítulo 1
- American Concrete Institute: Bulding Code Requirements for Reinforced Concrete (ACI
318-89), 1989
- Comite Europeen du Beton: CEB-FIP Model Code for Concrete Structures, 1990
- New Zealand Standards Association. Code of Practice for the Design of Concrete
Structures (NZS 3101), Part 1, 1982
- MacGregor, J.G.: Load and Resistance Factors for Concrete Design, ACI Journal, Julio-
Agosto 1983, pp 279-287
- Meli, R.: Bases para los criterios de diseño estructural del proyecto de Reglamento de
construcciones para el Distrito Federal, Serie Azul No. 375, Instituto de Ingeniería, UNAM,
Junio 1976
- Aoyama H.: Outline of Earthquake Provisions in the Recently Revised Japanese Building
Code, Bulletin, New Zealand National Society for Earthquake Engineering, Vol. 14, No. 2,
Junio 1981, pp. 63-80
Capítulo 2
- Bresler, B.: Reinforced Concrete Engineering, Vol. I: Materials, Structural Elements and
Safety: John Wiley and Sons, N.Y., 1974
- Philleo, R.E.: Increasing the Usefulness of ACI 214: Use of Standard Deviation and a
Technique for Small Sample Sizes; Concrete International, Septiembre 1981, pp. 71-74
- Tait, J.B.: concrete Quality Assurance Based on Strength Tests: Concrete International,
Septiembre 1981, pp. 79-87
- Raphael, J.M.: Tensile Strength of Concrete; Journal of the ACI, Marzo-Abril 1984, pp.
158-165
- Kent, D.C. y Park, R.: Flexural Members with Confined Concrete, ASCE Structural
Division, Vol. 97, No. ST7, Julio 1971, pp. 1969-1990
- Mander, J.B., Priestley, M.J.N. y Park, R.: Theoretical Stress-Strain Model for Confined
Concrete: ASCE Structural Division, Journal of Structural Engineering, Vol. 114. No. 8,
Agosto 1988, pp. 1804-1826
- Mattock, A.H., Kriz, L.B. y Hognestad, E.: Rectangular Concrete Stress Distribution in
Ultimate Strength Design; Journal of the ACI, Vol. 57, No. 8, Febrero 1961, pp. 875-926
- Informe Comité ACI 209: Effects of Concrete Constituents, Environment and Stress on
Creep and Shrinkage of Concrete; ACI Paper SP 27-1, 1971
- Informe Comité ACI 209: Prediction of Creep, Shrinkage and Temperature Effects on
Concrete Structures; ACI Paper SP 27-3, 1971
- Kato, B.: Mechanical Properties of Steel Under load Cycles Idealizing Seismic Actions;
CEB Bulletin D´Information No. 131, Abril 1979, pp. 5-27
- Aoyama, H.: Mechanical Properties of Concrete Under Load Cycles Idealizing Seismic
Actions; CEB Bulletin D´Information No. 131, Abril 1979, pp. 29-63
Capítulo 3
- Martínez, S., Nilson, A.H. y Slate, F.O.: Spirally Reinforced High-Strength Concrete
Columns, Journal of the ACI, Sept-Octubre 1984, pp. 431-442
- Sheikh, S.A. y Yeh, C.C.; Analytical Moment-Curvature Relations for Tied Concrete
columns: ASCE Journal of Structural Engineering, Vol. 118, No. 2, Febrero 1992, pp. 529-
544
- Bresler, B. y Gilbert, P.H.: Tie Requirements for Reinforced Concrete Columns; Journal of
the ACI. Title No. 58-26, Noviembre 1961, pp. 555.565
- Sheikh, S.A. y Uzumeri, S.M.: Analytical Model for Concrete Confinement in Tied
Columns; ASCE Journal of Structural Division, Vol. 108, No. ST12, Diciembre 1982, pp.
2703-2721
Capítulo 4
- Rüsh, H.: Researches Toward a General Flexural Theory for Structural Concrete: Journal of
the ACI, Julio 1960, pp. 1-28
- Mathock, A.H., Kriz, L.B. y Hognestad, E.: Rectangular concrete Stress Distribution in
Ultimate Strength Design; Journal of the ACI, Vol. 57, No. 8, Febrero 1961, pp. 875-926
- Kent, D.C. y Park, R.: Flexural Members with Confine de Concrete; ASCE, Vol. 97, No.
ST7, Julio 1971, pp. 1969-11990
- Sheikh, S.A. y Yeh,: Analytical Moment-Curvature Rotations for Tied Concrete Columns;
Journal of the Structural Division, ASCE, Vol. 118, No. ST2, Febrero 1992, pp. 529-544
- Bresler, B.: Design Criteria of Reinforced Columns under Axial Load and Biaxial Bending;
Journal of the ACI, Title No. 57-23, Noviembre 1960, pp. 481-490
Capitulo 5
- Corley, W.G.: Rotational Capacity of Reinforced Concrete Beams; ASCE, Vol. 92, No.
ST5, Octubre 1966, pp.121-146
- Informe Comité ACI 209: Effects of Concrete Constituents, Environment and Stress on
Creep and Shrinkage of Concrete; ACI Paper SP 27-1, 1971
- Informe Comité ACI 209: Prediction of Creep, Shrinkage and Temperature Effects on
Concrete Structures; ACI Paper SP 27-3, 1971
- MacGregor, J.G., Breen, J.E. y Pfrang, E.O.: Design of Slender Concrete Columns; Journal
of the ACI, Vol. 67, No. 1, Enero 1970, pp. 6-38
- Bree, J.E., MacGregor, J.G. y Pfrang, E.O.: Determination of Effective Length Factor for
Slender Concrete Columns; Journal of the ACI, Vol. 69, No. 11, Noviembre 1972, pp. 669-
672
- Ford, J.S., Chang, C. y Breen, J.E.: Design Indicators form Test of Unbraced Multipanel
Concrete Frames; Concrete International, Marzo 1981, pp. 37-47
- Bresler, B.: Design Criteria of Reinforced Columns under Axial Load and Biaxial Bending,
Journal of the ACI, Title No. 57-23, Noviembre 1960, pp. 481-490
Capítulo 6
- Collins, M.P.: Towards a Rational Theory for RC Members in Shear: Journal of the
Structural Division, ASCE, Vol. 104, Abril 1978, pp. 649-666
- Thurlimann, B.: Shear Strength of Reinforced and Prestressed Concrete Beams: ACI
Symposium, Abril 1976, pp. 17-38
- Nielsen, M.P., Braestrup, M.W. y Bach, F.: Rational Analysis of Shear in Reinforced
Concrete Beams; IABSE Proceedings P-15-78, pp. 1-16
- Kani, G.N.J.: Basic Facts Concerning Shear Failure; Journal of the ACI, Title No. 63-32.
Junio 1966, pp. 675-691
- Kani, G.N.J.: A Rational Theory for the Function of Web Reinforcement; Journal of the
ACI, Title No. 66-18, Marzo 1969, pp. 185-197
- Collins, M.O. y Mitchell, D.: A Rational Approach to Shear Design – The 1984 Canadian
Code Provisions: Journal of the ACI, Nov.-Dic. 1986, pp. 925-933
Capítulo 7
- Bresler, B.: Reinforced concrete Engineerting, Vol. I: materials, Structural Elements and
Safety; John Wiley and Sons, N.Y., 1974
- ACI Comité 408: Suggested Development, Splice and Standard Hook Provisions for
Deformed Bars in Tension; Concrete International, Vol. 1, No. 7, Julio 1979, pp. 44-46
- Tassios, T.P.: Properties of Bond Between Concrete and Steel Under Load Cycles
Idealizing Seismic Actions; CEB Bulletin D´Information No. 131, Abril 1979, pp. 67-122
- Jimenez, R., White, R.N. y Gergely, P.: Bond and Dowel Capacities of Reinforced
Concrete; Journal of the ACI, Enero 1969, pp. 73-92
- Kemp, E.L. y Wilhelm, W.J.: Investigation of the Parameters Influencing Bond Cracking:
Journal of the ACI, Enero 1979, pp. 47-71
- Giuriani, E., Plizzari, G. y Schumm, C.: Role of Stirrups and Residual Tensile Strength of
Cracked Concrete on Bond; ASCE Journal of Structural Engineering, Vol. 117, No. 1,
Enero 1991, pp. 1-18
- ACI Comité 408: Abstract of: State of the Art Report on Bond Under Cyclic Loads; ACI
Materials Journal, Title No. 88-M68, Nov.-Dic. 1991, pp. 669-673
Capítulo 8
- Informe Comité ACI 438: Tentative Recommendations for the Design of Reinforced
Concrete Members to Resist Torsion; Journal of the ACI, Vol. 66, No. 1, Enero 1969, pp.
1-8
- Hsu, T.T.C. y Kemp, E.L.: Background and Practical Application of Tentative Design
Criteria for Torsion; Journal of the ACI, Vol. 66, No. 1, Enero 1969, pp. 24-36