This document discusses soil properties used in LPILE for calculating p-y curves. It provides the soil modulus parameter k and soil strain parameter E50 for different soil types, including soft to hard clays and loose to dense sands. The soil modulus k varies from 30 pci for soft clay to 2000 pci for hard clay, and from 20 lb/in3 for loose sand to 225 lb/in3 for dense sand above the water table. The soil strain E50 ranges from 0.02 for soft clay to 0.001 for limestone.
This document discusses soil properties used in LPILE for calculating p-y curves. It provides the soil modulus parameter k and soil strain parameter E50 for different soil types, including soft to hard clays and loose to dense sands. The soil modulus k varies from 30 pci for soft clay to 2000 pci for hard clay, and from 20 lb/in3 for loose sand to 225 lb/in3 for dense sand above the water table. The soil strain E50 ranges from 0.02 for soft clay to 0.001 for limestone.
Direitos autorais:
Attribution Non-Commercial (BY-NC)
Formatos disponíveis
Baixe no formato PDF, TXT ou leia online no Scribd
This document discusses soil properties used in LPILE for calculating p-y curves. It provides the soil modulus parameter k and soil strain parameter E50 for different soil types, including soft to hard clays and loose to dense sands. The soil modulus k varies from 30 pci for soft clay to 2000 pci for hard clay, and from 20 lb/in3 for loose sand to 225 lb/in3 for dense sand above the water table. The soil strain E50 ranges from 0.02 for soft clay to 0.001 for limestone.
Direitos autorais:
Attribution Non-Commercial (BY-NC)
Formatos disponíveis
Baixe no formato PDF, TXT ou leia online no Scribd
Huang, An-Bin-Geotechnical and Geophysical Site Characterization_ Proceedings of the 3rd International Conference on Site Characterization (ISC'3, Taipei, Taiwan, 1-4 April 2008). BOOK Keynote Papers