Escolar Documentos
Profissional Documentos
Cultura Documentos
ARMS: (2 pcs)Link two parts. Stuff in the process of knitting. Tightly fill
the bottom,
further fill medium, the top part is not necessary to fill.Start with gray
color
1)6 sc in to mr (6)
2) 6 inc (12)
3-6) sc in each st around (12)
Change color to white.
7-8) sc in each st around (12)
Change the yarn to dark blue.
9-10) sc in each st around (12)
Change color to white.
11-12) sc in each st around (12)
Change the yarn to dark blue.
13-14) sc in each st around (12)
Change color to white.
15-16) sc in each st around (12)
Change the yarn to dark blue.
17-18) sc in each st around (12)
Change color to white.
19-20) sc in each st around (12)
Change the yarn to dark blue.
21-22) sc in each st around (12)
Change color to white.
23) sc in each st around (12)
Knit another 6 sc, then fold the edges of the parts together, knit 6 sc.
Yarn to fasten, cut off.
TAİL:
Stuff in the process knitting. Tightly fill the bottom, then to fill medium,
the upper part is not necessary to fill.
Fold the edges of the parts together, knit 6 sc. Yarn to fasten, cut off.
LEGS AND BODY:
First knit the first leg. Legs and body tight stuff in the knitting process.
Tie the second leg in the same way as the first, but after 17 rows, knit
another 18 sc.
The thread does not cut, and continue to knit the body. (You may need
another
the number of loops after the 17th row, then you need to adjust it
yourself.)
18) From the second leg dial a chain of 6 ch and attach to the first leg
here finished knitting (in the loop following ss). Make sure the legs look
straight.
Next knit 21 sc on the first part, 6 st chain of air loops, 21 sc on the
second part, 6 sc on the back chains of air loops (54)
44) 9 sc, 6 sc with the arm, 12 sc, 6 sc with the arm, 3 sc (36)
Change the yarn to dark blue.
45) (4 sc, dec)*6 (30)
46) sc in each st around (30)
Change the yarn to gray.
47) (3 sc, dec)*6 (24)
48-49) sc in each st around (24)
HEAD:
50) 24 inc (48)
51) (7 sc, inc)*6 (54)
52) 4 sc, inc, (8 sc, inc)*5, 4 sc (60)
53-64) sc in each st around (60)
65) 4 sc, dec, (8 sc, dec)*5, 4 sc (54)
66) (7 sc, dec)*6 (48)
67) 3 sc, dec, (6 sc, dec)*5, 3 sc (42)
68) (5 sc, dec)*6 (36)
69) 2 sc, dec, (4 sc, dec)*5, 2 sc (30)
70) (3 sc, dec)*6 (24)
71) sc, dec, (2 sc, dec)*5, sc (18)
72) (sc, dec)*6 (12)
Fasten off and cut the yarn, leaving a long tip with which to pull off the
remaining hole. The tail of the yarn is hidden inside the head.
EARS (2 pcs)
Link the two details in gray. No need to stuff.1) 6 sc in to mr (6)
2) (sc, inc)*3 (9)
3) (2 sc, inc)*3 (12)
4: (5 sc, inc)*2 (14)
5: (6 sc, inc)*2 (16)
6: (7 sc, inc)*2 (18)
7: (8 sc, inc)*2 (20)
When sewing, make a small tie white yarn stitches around the
peephole to look turned out to be more “alive”. Black yarn you can add
eyelid rather.On the muzzle with pins mark the location of the nose,
embroider with pink yarn.
Embroider mouth with black yarn, eyebrows and antennae.
Pins mark the location of the ears, sew approximately between 61 and
70 next (make sure the ears are sewn symmetrically).
TROUSERS:
Knitting pants starts at the top.
Color “jeans” dial a chain of
54 ch and with the help of ss to close it in a circle.
1) 2 ch lifting, 54 dc, ss (54)
2) (8 sc, inc )*6 (60)
3-7) sc in each st around (60)
In the next row you need to do hole for the tail.
8) Dial a chain of 6 ch, 6sc previous row skip, continue knitting in the
next loop, 54 sc (60)
9-18) sc in each st around (60) (10 rnds)
Next, go back to the beginning of knitting trousers, count off from the
first 2 sc (this will be the distance between them), tie the thread,
leaving a loose tail about 20cm.Count off 28 sc, use ss to connect
in a circle and knit again 11 rows of 28 sc.
Next, finish the knitting ss, fasten and yarn cut off, the tip of the thread
hide.
Sew up the tip of the yarn distance between the legs.
POCKET:
Knit in rotating rows, each row start with a 1ch climb.
Dial a chain of 10 ch + 1ch lifting.
First row start from the 2nd from hook loop.
1-8) 10 sc
To tie the sides of the pocket sbn yarn fasten and cut off leaving a long
tip for
sewing on
WEBBİNG:
Tie 2 pieces of the desired length. To me
it took to dial 28 ch maybe you will have a different amount (depends
on the density of knitting).
Knit in rotating rows. When typing
initial chain, leave free tail about 20 cm.
Dial a chain of 28 ch + 1 ch lifting.
First row start from the 2nd from hook loop.
1) 28 sc, 1ch lifting
2) sc in each st around (28)Yarn to fasten and cut, leaving tip for
sewing.
Sew the straps to the pants, fronts sew decorative buttons.Sew a
pocket.
BERET:
Start with white color
1) 6 sc in to mr (6)
2) 6 inc (12)
3) (sc, inc)*6 (18)
4) (2 sc, inc)*6 (24)
5) (3 sc, inc)*6 (30)
6) (4 sc, inc)*6 (36)
7) (5 sc, inc)*6 (42)
8) (6 sc, inc)*6 (48)
9) (7 sc, inc)*6 (54)
10) (8 sc, inc)*6 (60)
11) (9 sc, inc)*6 (66)
12) (10 sc, inc)*6 (72)
13) (11 sc, inc)*6 (78)
14) (12 sc, inc)*6 (84)
15-17) sc in each st around (84)
18) (12sc, dec)*6 (78)
19) (11sc, dec)*6 (72)
20) (10sc, dec)*6 (66)
21) sc in each st around (66)Finish knitting ss, fasten and yarn
cut off, the tip of the yarn hide.
SOLİTAİRE:
On paper, make a pattern in the size indicated on the photo.
Transfer the pattern to the fabric, leave the allowances of 0.7-1 cm for
hemming, cut.
Process edges, bend and stitch